Laying of 110mm dia pipe line from urban health center to lanka sekhar housein 4th ward Ramachandrapuram Municipality.Under Mpl General Funds

Earthwork in excavation for foundations trenches as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers on prepared surface, mixing by mix in place method at once and compacting with Hand roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 MORD. with STONE DUST etc., complete as per SS and as directed by the departmental officer in charge of the work, but excluding siegniorage charges.

Restoration of CC Road with M20 Desgin mix using 20 mm graded metal with machine mixing . The rate including cost and conveyance of all materials and labour charges for mixing, laying, vibrating, curing, etc., complete as per SS and as directed by the departmental officer in charge of the work, but excluding seigniorage cahrges

Manufacture, supply and delivery of the following HDPE pipes confirming to IS code of 4984-1995 and as per subsequent ammendments from time to time including revision if any in standard lengths of 6.00m. This rate including cost of all material,all taxes,

Lowering, laying, jointing and testing of the following sizes of HDPE pipes, fittings with water and testing to required pressure. This rate including all labour chrges and all jointing material and all incidental charges etc., complete as directed by the departmental officer in-charge of the work.

Manufacture, supply and delivery of the following sizes of HDPE collars, MS flanges and end caps.This rate including cost of all material, all taxes, labour charges and conveyance charges from source to dept stores at Kakinada loading, unloading and stacking etc., (a) 110 mm dia HDPE flanges

Manufacture, supply and delivery of the following sizes of HDPE collars, MS flanges and end caps.This rate including cost of all material, all taxes, labour charges and conveyance charges from source to dept stores at Kakinada loading, unloading and stacking etc., (a) 110 mm dia HDPE flanges (b) 110 mm dia HDPE Collars

Manufacture, supply and delivery of the following sizes of HDPE collars, MS flanges and end caps.This rate including cost of all material, all taxes, labour charges and conveyance charges from source to dept stores at Kakinada loading, unloading and stacking etc., (a) 110 mm dia HDPE flanges (c) 110 mm dia HDPE End caps

Manufacture, supply and delivery of the following sizes of HDPE collars, MS flanges and end caps.This rate including cost of all material, all taxes, labour charges and conveyance charges from source to dept stores at Kakinada loading, unloading and stacking etc., 250mm HDPE Coller neck

Manufacture, supply and delivery of the following sizes of HDPE collars, MS flanges and end caps.This rate including cost of all material, all taxes, labour charges and conveyance charges from source to dept stores at Kakinada loading, unloading and stacking etc., 250mm MS Flanges

Supply and delivery of MS bolts and nuts for flanged joints. The rate including cost and conveyance of all material, incidental charges etc., complete.

Supply and delivery of 6mm thick Rubber packing for flanged joints. The rate including cost and conveyance of material, incidental charges etc., complete.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. Unit = cum Taking output = 75 cum (172.50 t)(100 x 3.75 x 0.200)

Manufacturing supply and delivery of Cast Iron pipes and fitting spls conforming to IS No. 71/1/196 5531/1979 and cid joint confiring to is no 8794/1988 11omm dia CI semi cricle bedn

Manufacturing supply and delivery of Cast Iron pipes and fitting spls conforming to IS No. 71/1/196 5531/1979 and cid joint confiring to is no 8794/1988 250 to 100 CI T Bend

Jointing CI Pipes fitting and valves with flanged ends including cost of jointing materilas such as bolts rubber inspection white lead including all jointing charges

Laying of 110mm dia pipe line from urban health center to lanka sekhar housein 4th ward Ramachandrapuram Municipality.