REPLACEMENT OF EXISTING HYDRAULIC LIFT WITH SITC OF 01 NO.GEARLESS AND MACHINE ROOM LESS GOODS CUM 15/16 PASSENGERS LIFT B+G+1 AND SITC OF 01 NO. OF 15/16 PASSENGERS CUM GOODS LIFT B+G+1+2(WITH M.S. FABRICATED STRUCTURE) WITH 4 YEARS COMPREHENSIVE MAINTENANCE SERVICE CONTRACT AFTER DEFECT LIABILITY PERIOD OF 1 YEAR AT PANDIT DIN DAYAL AUDITORIUM, BODAKDEV AHMEDABAD

NAME OF WORK:- REPLACEMENT OF EXISTING HYDRAULIC LIFT WITH SITC OF 01 NO. GEARLESS AND

MACHINE ROOM LESS GOODS CUM 15/16 PASSENGERS LIFT B+G+1 AND SITC OF 01 NO. OF 15/16 PASSENGERS

CUM GOODS LIFT B+G+1+2 (WITH M.S. FABRICATION) WITH 4 YEARS COMPREHENSIVE MAINTENANCE SERVICE

CONTRACT AFTER DEFECT LIABILITY PERIOD OF 1 YEAR AT PANDIT DIN DAYAL AUDITORIUM, BODAKDEV

S.N. ITEM DESCRIPTION UNIT QTY UNIT COST

Supply ,installing , commissioning and testing of 15/16 Passengers,

Ground plus 2 upper floor (Basement + GF +FF) with Rated Speed of

1.0 m/sec., elevator (MRL LIFT) as per R & B S.O.R 26-27 item no - 13-

1 1-AP (C)) ( Category - Premium ) having following specifications:-

erection permission, Lift License, Inspection & Liaison fees and if

any in the scope of tenderer

Supplying, Erecting, Testing & Commissioning the passenger lift having

following main features:

[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift

A. C. Permanent Magnet Synchronous motor of proper rating with high

efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control drive with

encoder feedback closed loop system shall be used for lift car and

door operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain

the impact load cabin + passenger with safety factor of fire for steel

and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling

will be S.S. finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of anti skid PVC with choice of colour of

engineer in charge. Car doors shall be of stainless steel grade

hairline finish with centre opening / telescopic automatic doors. Car panel

will also be S.S. 304 finished with emergency stop device, mechanical

door safety device, facility of auto/ attended mode. All car panel

buttons and all floor switches must be with brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with

floor position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light

beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer

shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters

shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as

per actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along with

the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost,

where ever required as / if directed by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all

circuit, Over Voltage Under Voltage protection and THD eliminator in

circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided

by the agency. Only 3 phase Power Supply shall be made available by

department in lift machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft

and machine room related to erection of lift shall be made by lift agency

without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and

liaison services for obtaining all necessary permission from lift

inspector and other authorities. [20]

acrylic transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act

2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and

provide report by third party authorized by concern licensing authority

5.agency has to provide third party insurance upto completion of free

maintenance period and submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must

be of Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline

finish steel grade of 304 should be provided at appropriate height on the

Rear & Side Wall Panels in Lift Car.

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM

1. Advanced control system dual 64 bit embedded microprocessor with

CANBUS Serial Communication mode including Regenerative power

efficient operation,on site programming facility, Anti nuisance, Pte-

opening, BMS/RMS with necessary online real time monitoring system

having necessary connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with

arrival gong and hall lantern & TFT Screen in the car with MP3 Voice

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line

/ Honeycomb for car and all Doors, All landing doors must have fire rating

up to 2 hours and car door must have multi-level crisscross beam door

4. To & fro communication system & wiring (i.e. car , control room & guard

room ) and Each elevator are equipped with remote monitoring

system.agency has to provide mobile app and user id and password for

15/16 Passengers, Ground plus 2 upper floor with Rated Speed of

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached

herewith. Prem. Cat. (SOR - 2026-27 - item no - 13-1-AP (C)) With

General PLUS ADDITIONAL SPECIAL FEATURES attached herewith.

Comprehensive Maintenance of the lift for 4 Years after

completion of DLP.

1 st year Job 1 65958

2 nd year Job 1 65958

3 rd year Job 1 75380

4 th year Job 1 84803

Supply, Installation, Testing & Commissioning of Passenger

Lift as per the technical specifications and conditions

mentioned herein.

15/16 Passengers, Ground plus 3 upper floor(Basement +

3 GF + FF + SF) with Rated Speed of 1.0 m/sec., No 1 2003064

26-27 SOR R & B* 13-1-AQ (C) With General PLUS

ADDITIONAL SPECIAL FEATURES as per R & B SOR - 26-

27 Item no - 13-1-AQ (Specifications as per Sr. No.-2)

Comprehensive Maintenance of the lift for 4 Years after

completion of DLP of Two year .

1 st year Job 1 70107

2 nd year Job 1 70107

3 rd year Job 1 80123

4 th year Job 1 90138

5 Existing Hydraulic lift Buyback Job 1 188450

Note :- Please note that floor/passengers calculation is done on the base of requirement, if any deviation in

floor/passengers (addition or substraction) then payment for SITC and comprehensive maintenance will be done

as per actual work done.