SPECIAL REPAIR TO CRANE RCC COLUMN, WALL CRACKS AND MISC SERVICES AT 3BRD AF STATION CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

M&L for drilling mechanically 12mm holes of required depth for column/beam and providing nozzle for pressure grouting with quick setting chemical and pressure grouting slurry mixed with expanding grout mix until rejection at height upto 10 metre, complete all as specified and directed .

M&L for providing 5mm thick epoxy coating for the exposed reinforcement as per Acute recommendation at height upto 10 metre, complete all as specified and directed.

M&L for laying of 40mm thick 1:1.5:3 polymer SBR concrete using 10mm stone aggregate using chemical for the column/beams/slab including 12mm thick plaster in cement mortar 1:3 with and including water proofing compound as per manufacturer instruction at height upto 10 metre, complete all as specified and directed. Note:- (i) Chemical to be used of M/s pedilite India Ltd wok, work to be executed by authorized applicator of M/s Pedilite India Ltd under supervision of the Rep of M/s Pedilite India Ltd. (ii) Scaffolding to be provided by contractor as required.

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings , complete all as specified and directed.

S&F Pre painted Coloured Galvalume roofing system sheet 0.50 mm thick, corrugated sheet having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. Note:- (i) The manufacturer's test certificate and individual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation. (ii) The contractor shall ensured that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Total coated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides. (iii) The painting shall be coloured baked enamel polyester with silicon coating of film thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominal thickness Primer. (iv) The contractor shall produce purchase vouchers for each lot for verification of Engineer-in-Charge. Make:- M/s Tata Blue scope/Jindal/Bhusan

Supply and fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw , complete all as specified and directed.

Supply and fixing, Plain, galvanised, mild steel sheeting 1.25 mm thick , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 GSM filling of joint with siliconized acrylic sealent, complete all as specified and directed.

Supply and Fixing, Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, built in CM (1:6) including demolition of old brick, complete all as specified and directed.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. Note:- This item is to be executed upto the height of 10 metre. The cost of scaffolding deemed to included in the quoted rate.

Supply and fixing rough cast wire glass 6.4mm thick and glazing with siliconized acrylic sealant/beads (iron/aluminium) (any type as per site requirement) in square exceeding 0.5Sqm but n.exc 0.75 Sqm in each pain , complete all as specified and directed. Note:- This item is to be executed upto the height of 10 metre. The cost of scaffolding deemed to included in the quoted rate.

Supply and fixing plain sheet glass 3mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazed with oil putty or any type of beads, complete all as specified and directed.

Material and labour for glass silicon sealant of section 18mm width and 18mm depth for fixing of old glass panes, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/backing and removing rubbish off the premises of MoD land distance exceeding 2Km but n.exc 2.5Km, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.

Material and labour for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set jointed and pointed in chemical resistance mortar in vertical surfaces such as wall etc including 10mm thick cement plaster in cement mortar 1:4, complete all as specified and directed.

Material and labour for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set jointed and pointed in chemical resistance mortar in floor including 15mm thick screed in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for complete removal of existing surface of wall and providing two coat of oil bond distemper over a thin layer of putty over a coat of primer and rubbing with sand paper at any height of building including necessary scaffolding, ladder, formwork etc complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) and removal outside Air force area distance exceeding 1.5Km but n.exc 2Km i.e. out of MoD land, complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in sub base, complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in pavement complete all as specified and directed.

Supply and fixing mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe 410 -W (Gde- E- 250) quality- A including dismantling, complete all as specified and directed.

M&L for two coats of Oil Bound Distemper over a coat of alkali resistant primer over a thin layer of wall putty including preparation of plastered or unplastered new wall surfaces upto 12m height, complete all as specified and directed . Note:- The cost of scaffolding deemed to included in the quoted rate.

Material and labour for applying one coat of synthetic enamel paint on old steel surfaces over 10cm width or girth, including preparation of steel surface upto 12m height , complete all as specified and directed. Note:- The cost of scaffolding deemed to included in the quoted rate.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface upto 12m height , complete all as specified and directed. Note:- The cost of scaffolding deemed to included in the quoted rate.

Supply and fixing mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment of grade Fe 410 -W (Gde- E- 250) quality- A , complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed .

M&L for removing building material etc (other than earth work) to a distance of 100m to 500m or under including loading, unloading and stacking at the destination complete all as specified and directed .

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint at any height including necessary scaffolding, ladder etc, complete all as specified and directed.

Material and labour for disconnecting the electrical connection from panel/equipment and taking down carefully LT cable of size 150 Sqmm 3.5 core and kept at site for reuse/credit, complete all as specified and directed.

All as per ser item No 31 above but of size 95Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 31 above but of size 70Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 31 above but of size 50Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 31 above but of size 25Sqmm 4 core complete all as specified and directed.

Material and labour for refixing/relaying LT cable of sixe 150Sqmm 3.5 core , complete all as specified and directed.

All as per ser item No 36 above but of size 95Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 36 above but of size 70Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 36 above but of size 50Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 36 above but of size 25Sqmm 4 core complete all as specified and directed.

Supplying, laying, testing, connecting and commissioning LT cable size 150Sqmm, 3.5core, 1100 Volts grade heavy duty XLPE insulated armoured with aluminium stranded conductor with suitable size cable glands, crimping type cable lugs etc, complete all as specified and directed.

All as per ser item No 41 above but of size 95Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 41 above but of size 70Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 41 above but of size 50Sqmm 3.5 core complete all as specified and directed.

All as per ser item No 41 above but of size 25Sqmm 4 core complete all as specified and directed.

Supply and fix cable tray stainless steel powder quoted of size 300mmx54mm in 03 metre length, complete all as specified and directed. Make:- YAMUNA DENSONS/ REW/GM

Material and labour for dismantling/taking down carefully sheet metal enclosure distribution board TPN/SPN 8way/4way and kept at site for reuse/taking credit, complete all as specified and directed.

Material and labour for refixing of sheet metal enclosure distribution board TPN 4way/8way at designated location including making connection , complete all as specified and directed. Note:- Item for re-use will be obtained from item No. 47.

Material and labour for refixing of sheet metal enclosure distribution board SPN 4way/8way at designated location including making connection , complete all as specified and directed. Note:- Item for re-use will be obtained from item No. 47.

S&F MCB DB TPN 08 way steel sheet phospetised powder painted with 200Amps rated bus bar with IP 43 protection 415V neutral link, earth bar and din rail double door complete all as specified and directed .

S&F MCB DB SPN 240V 8 way steel sheet phospetised powder painted with 200Amps rated bus bar IP 43 protection 415V neutral link, earth bar and din rail double door complete all as specified & directed .

Material and labour for dismantling/taking down carefully GI/Copper strip of any size and kept at site for reuse/taking credit, complete all as specified and directed.

Material and labour for refixing of GI/copper strip at designated location, complete all as specified and directed. Note:- Item for re-use will be obtained from item No. 52.

Supply and fixing of GI strip of size 32x6mm, complete all as specified and directed.

Supply and fixing of copper strip of size 32x6mm, complete all as specified and directed.

Taking down existing copper/aluminium conductor point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, bell/buzzers, regulators, sockets etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface of walls, ceiling, etc, complete all as specified and directed.

Taking down carefully flood light fitting of any wattage and kept at site for reuse/credit, complete all as specified and directed.

Material and labour for refixing of LED flood light of any wattage at designated location on truss/wall with mounting arrangement and making connection, complete all as specified and directed. Note:- Item for re-use will be obtained from item No. 57.

Material and labour for refixing of LED flood light 120W 230V, AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed. Note:- Item for re-use will be obtained from item No. 57.

Material and labour for Sub Main Wiring with Two run single core 2.5Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including PVC nedium duty conduit of size 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including One run of continuous multi stranded copper conductor 1.5Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface including taking down old wiring, complete all as specified and directed. Note:- Two run of 2.5Sqmm + One run of 1.5Sqmm for earth wire shall be measured as one RM.

Material and labour for Sub Main Wiring with four run single core 2.5Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including PVC nedium duty conduit of size 20mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including two run of continuous multi stranded copper conductor 1.5Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface including taking down old wiring, complete all as specified and directed. Note:- Four run of 2.5Sqmm + Two run of 1.5Sqmm for earth wire shall be measured as one RM.

Supply and fixing DOL starter suitable for three phase, 415V, 50Hz suitable for 4 HP including making connection for three phase exhaust fan , complete all as specified and directed.

Material and labour, point wiring (Concealed) with single core multi stranded copper conductor 1.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metallic rigid PVC conduit medium duty of size 19/20mm with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/fan regulators etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/ fan/bell point controlled by one modular switch, complete all as specified and directed. Note : 1. Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. 2. Modular switches, sockets etc shall be measured and paid separately.

All as per Serial Item No. 63.00 above but for one socket outlet 3pin, 6Amp, on independent board.

Material and labour, point wiring with single core multi stranded copper conductor 4.0Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including non metalic rigid PVC conduit medium duty of suitable size with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including powder coated M.S. box of required module for modular switches/sockets etc, including 4.0Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one power point 6 pin combined module multipurpose 6 & 16Amps modular socket outlet, controlled by one modular switch, complete all as specified and directed. Note : 1. Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. 2. Modular switches and sockets shall be measured and paid separately.

Supply and fix, modular switch, one way, 6Amps, one module, complete all as specified and directed. Make:- Legrand/SSK/Anchor

S&F modular switch, 1 module single pole one way 16 Amp complete all as specified & directed.

S&F Socket outlet 3 pin 6 amp multipurpose, modular type, 2module complete all as specified & directed.

S&F Socket outlet 3 pin 6/16Amp multipurpose, modular type, 2 module 240 volt complete all as specified & directed.

Supply and fix ceiling rose, surface bakelite, 65mm x 50mm, three terminals complete all as directed.

Supply and fix in replacement of MCBs SP 6-32Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.

Supply and fix in replacement of MCB SPN 40 to 63Amps, 240volts, 10KA, 'C' curve, complete all as specified and directed.

Supply and fix in replacement of MCB TP 63Amps, 415V, 10KA, 'C' curve, complete all as specified and directed.

Material and labour for flame proof point wiring on surface with single core multi stranded copper conductor 1.5Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100volts grade drawn through and including stove enamelled steel conduit not less than 20mm dia bore medium grade with and including all standard fittings such as Tee junction, bends, nipple, junction box, socket etc, including 1.5Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100volts grade for earth continuity, as for one light/fan/bell point controlled by one switch, complete all as specified and directed.

Supply and fixing flame proof rotary type termination box in LM6, 16 Amp, single pole 250V, complete all as specified and as directed.

Supply and fixing in repair flame proof LED light fitting 2x16W/20W, flame proof, CMRI certified IP65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc, complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and as directed.

Supply and fixing flame proof exhaust fan of size 380mm, 1440 RPM heavy duty AC Single Phase 230/240 V with louvers including making connection with 3 core copper conductor of size 1.5Sqmm and also including cutting hole in brick wall and making good disturbed surface, complete all as specified and as directed.

Supply and fix exhaust fan with louvers, steel body, AC single phase, 230V of size 450mm sweep 1400 RPM heavy duty including making connection with 3 core copper conductor of size 1.5Sqmm and also including cutting holes on wall and making good the disturbed surface with existing specification, complete all as specified and directed.

Supply and fix exhaust fan with louvers, steel body, AC three phase, 415V of size 900mm sweep 700 RPM heavy duty including making connection with 3 core copper conductor of size 2.5Sqmm and also including cutting holes on wall and making good the disturbed surface with cement mortar 1:4, complete all as specified and directed.

Supply and fix in repair flame proof SPN DB 4 way with metal door IP 54 protection fixed MCB SPN 32 Amps - 01 No and MCB SP 6 to 32 Amp-02 Nos complete on pillars with MS clamps etc including electric connections, complete all as specified and as directed.

Supply and fix cable PVC insulated copper conductor 1100 volts cross sectional area 6Sqmm 3 core in medium duty PVC conduit for tank heaters ,complete all as specified and as directed.

Material and labour for Earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including GI wire 4 mm dia as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 15 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc , complete all as directed and specified. Note : The earth value/result must be less than 5 ohms.

Material and labour for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick burried directly in ground (earth pit not less than 2.5 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, earth pit surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, including Copper strip 20 x 3 as earth lead fixed by means of nuts, bolts, check nuts and washers etc and other end connected to the test point including 40 mm dia light grade GI protection pipe and watering pipe 20 mm dia medium grade with funnel and wire mess including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc , complete all as directed and specified. Note : The earth value/result must be less than 3 ohms.

Material and labour for fabrication of air ducts made out of galvanised steel sheet with 120 GSM rectangular flanged or with joints all as specified in IS 655 including support for hanging from ceiling or fixing to the wall of size 20 gauge , complete all as directed and specified.

Note:- Amount of credit of Rs. 102950.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

PARTAP ENGINEERING WORKS

KUMAR AND COMPANY

M/S MANI GARG CONTRACTOR

shree balaji builders