Provision of Additional 20 Persons Passenger cum Bed Lift with power mains arrangements to the newly constructed 50 bedded Critical Care Block in Government Hospital at Paramathi Velur in Namakkal District

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1No. 20 persons 1360kgs. Capacity Passenger cum Bed Lift (Gearless With Machine Room ) as per the following specifications. 1. Location : 50 Bedded Critical Care Block in GH at Paramathi Velur 2. No. of Lift : One No 3. Type of Lift : Passenger cum Bed Lift with machine room - Gearless model 4. Capacity of Lift : 20 Persons / 1360kgs 5. Speed : 1.0 mtr / sec 6. Type of Drive : V3F Drive with enhanced ride comfort and near Zero Level Functions. 7. No. of Floors : Ground floor + 4 Floors 8. Total Travel : 15 Mtr / Pit 1600mm / Head room 4500mm 9. Leveling accuracy : High level accuracy with smooth and jerk free stopping. 10 Construction of : High Quality Car.1.5mm thick hairline finish S.S. Car and Hand rail, garanite/ marble flooring and Perspex False Ceiling.

11 Position of Machinery : Directly above the Lift well – Gearless with machine room. 12 No. of Landings : 5 Nos in the front side. 13 No. of Car Entrance : One in the front side. 14 Car Entrance : Power operated V3F Drive, side opening Sliding Stainless Steel (1.5mm) Hairline finish door. 15 Landing Entrance door : Side opening Sliding Stainless Steel (1.5mm) hairline finish door with provision for Emergency Exit key at All landings. 16 Lift well : 2200mm (Wide) x 3000mm (Depth) as per IS 14655(Part 1) 2000. Lift shaft available. 17 Lift Pit : 1800 mm (available) Depth. 18 Car Size : 1300 x 2400 x 2300 (mm Wide x mm Depth x mm Height as per IS 14665 (Part I) 2000 19 Car Clear Opening of Gates / Doors / Lintel : 1200mm Wide x 2000mm Height and Lintel : 2300mm as per IS 14665 (Part I) 2000 20 Power Supply : 400/415V 3phase 50Hz AC Power Supply. 21 Type of Control System : Micro Processor based Simplex Selective Collective control with / without attendant. 22 Car fittings : LED lights & Regular (Square) cabin fan. 23 Lift Well : Available

24 Indication : UP / DOWN Digital direction and position indicator for all Landings and inside the car. 25 Emergency provisions : Battery operated Alarm bell & Light to be Provided with Automatic charging device. 26 Fire Man’s switch : In the Ground Floor 27 Minor Builder works : included 28 Scaffoldings : included 29 Sill angles and Facio Plates : included 30 Steel for Lift Machinery : included 31 Servicing and maintenance : Free Comprehensive Maintenance for one Year Guarantee period. 32 Automatic Rescue Device : Provision to facilitate the landing to the nearest floor at the time of power failure. The ARD consists of suitable Battery system with charger, Inverter, under voltage protection system etc. complete with all accessories. 33 Provision for Intercom : To be provided in the Ground Floor & Machine Room with Phone (Press & Speak). 34 Lift License : Preparation of Drawings, payment of inspection charges to CEIG and insurance policy and Obtaining CEIG approval for the Lift as per Lift act should be done by the Lift contractor. 35 Floor Position : Included with LED display and floor annunciator.

36 Special Features: a. Infra red door sensor with full height screen b. S.S. hairline finish hand rail in car c. Vandal proof SS button with SS cover d. S.S. hairline finish door frames for landing doors e. V3F door operator f. Call register signal g. Stainless steel facio plates for car operating panel and landing fixtures h. Steel ladder for Lift machine room i. On / Off switch for fan and light j. Over-load warning indicator with audio Announcer k. Voltage stabilizer for control circuit. 37 Over Speed Governor, Phase failure and Phase reversal Relay, alarm bell, T guide brackets for car and counterweight, Rubber padding under the winding unit, Motor of adequate capacity, Electromagnetic brake with compression springs, Car safety gears, Buffers, Electro mechanical locks, Emergency key, side supporting angles, Motor over - load protection devices, Final limit switch main, suspension ropes, Counter weights, Lifting joist for mounting the Machineries.

38. Guarantee : Guarantee at least for one year for the materials and workmanship of equipments should be offered by the Lift contractor. 39. Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department. 40. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb

Supply and fixing of 5A 3 Pin combined wall socket with 5A flush type switch in suitable module surface mounting Box (plastic) with module cover plate (plastic) on wall with connections. (Higher end)

Supply and fixing of 16A Two-way switch in suitable Modular flush type GI box on wall with suitable front cover plate with earth connection (Higher End) (For Lift well lighting Control)