Annual Plan - Malappuram District Panchayath KP Kulamp Drinking water project at Pulamanthole Electrification - 1445-23 -General Electrical Work

Amount

wiring

OD157865/2023-2024:Supply, installation testing and commissioning of 30 HP or nearest suitable size Vertivcal open well submersible or suitable pump set 2850 rpm at rated voltage 3 phase 380/415V 50HZ AC supply VOML30DX 6 30 75mm (3") S.D DECCAN/CRI/Kirloskar or similer make delivery size 100 mm or nearest size having standrd discharge using leak proof materials as required and suspended on existing rope/proposed/steel rope including fixing G.I. / meadium duty Column Pipe for Submersible Pumps as delivery pipe connected one by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving onnection and trial run etc as per the direction at site .

90.6.6.5:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

OD53090/2023-2024:Supply, Providing, laying and fixing 100 dia ornearest size G.I Pipe (medium class) for supporting /as delivery pipe of the top of the tank, The pipe placing across/ horozondal to the river and clamping each other using required accessories etc asquired

OD53091/2023-2024:Supply, threading ,laying and jointing of the 50 mm "B' class GI pipe with all required accessories in ground/clamping as assupport pipe etc as required.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD53092/2023-2024:2 X 25 mm X 3 mm G.I. strip test joint Supply, providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

OD53093/2023-2024:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD53094/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.3.3:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardSupply and providing 'U' section PVC beeding in the panel board

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

2.2.13:Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 30 KA 4 Pole

2.1.3:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

90.14.11.2:MCCB AccessoriesSupply and fixing one number earth fault Relay up to 125A to 200A with CBCT.

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.14.24.6:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.6 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

OD53095/2023-2024:Supplying and fixing 120/5 A, 5 VA, accuracy class 0.5, Tape wound Metering CT , in existing meter board

OD53096/2023-2024:Supply and fixing Digital multifunction meter to read V,A,F, PF-3 Phase accuracy class 1 LED

OD53097/2023-2024:Supply and installation of Motor pump controllers suitable for 7.5/10HP motor pumps . with single phase preventer and dry run protector (L & T MU-G10 DOL / equivalent )

90.14.28.9:S & F Motor starters of the following ratingsFully automatic star delta starter for 50HP motor

OD53098/2023-2024:Supply and fixing Danger notice board of size, 125 x 75 mm

OD53099/2023-2024:Supply and fixing Red, Green, blue, Yellow, Orange Colours LED Indicator, AC/ DC as required

OD53100/2023-2024:Supply and providing 80 mm or nearest size dia Flange set

OD53101/2023-2024:Supply and providing 80mm or nearest size dia Gun metal non return valve (ISI)

OD53102/2023-2024:Supply and providing 80 mm or nearest size dia Full way valve (ISI)

OD53103/2023-2024:Supply and fixing flat iron clamps made from 2 nos. 50x6 mm flat iron clamp of 50 mm with suitable size bolt and nut for fixing delivery pipe on the top of the well as required

OD53104/2023-2024:Supply and providing 80 mm or nearest size stainless steel Hose Collar with hose clip

OD53105/2023-2024:Supply & installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-6535-STD-NF] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

OD53157/2023-2024:Supplying and fixing 160A, HRC Fuse with HRC Fuse link with connections, in existing meter board

OD53107/2023-2024:Supplying and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board

OD53108/2023-2024:Supply and laying suitable size plastic rope

OD53111/2023-2024: Charges for preperation of KSEB test Report for submitting to the concerned KSEB section office

MOIDEENKUTTY KOLAMBAN

P. R. RIJESH

Bidder Name

ANSARI KUNDIL

P. R. RIJESH

MOIDEENKUTTY KOLAMBAN