Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.1 LAccepted-AOC RZ 140 A EAST SAGARPUR STREET NO 7 8 NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹36.0 L+₹20,094 (0.56%)Rejected-AOC | L2 | Rejected-AOC R | |
| 3 | L3₹40.3 L+₹4.5 L (12.6%)Rejected-AOC 00 KAMALWAGANJA ROAD NEAR HANUMAN MANDIR HARINAGAR SHIV PURAM PHASE 1 HALDWANI NAINITAL UTTARAKHAND 263139 | NAINITAL | UTTARAKHAND | 263139 | L3 | Rejected-AOC R | |
| 4 | L4₹41.8 L+₹6.0 L (16.9%)Rejected-AOC NEAR DOON INSTITUTE BHALLA FARM SHYAMPUR RISHIKESH DEHRADUN UK 249 204 | DEHRADUN | DEHRADUN | UTTARAKHAND | 249204 | L4 | Rejected-AOC R | |
| 5 | L5₹43.1 L+₹7.3 L (20.3%)Rejected-AOC | L5 | Rejected-AOC R |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
DAY TO DAY MAINT AND REPAIRS OF ELECTRIC SUPPLY OF OTM AND MD ACCN AT NORTH COMPLEX AT IMA DEHRADUN
2022_MES_560410_1
GE/IMA/T-61 of 2022-23 9247/E8
Open Tender
Support/Maintenance Service
Item Wise
334 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹90,000
Yes
16 Jan 2023
29 Oct 2022
28 Nov 2022
30 Oct 2022
26 Nov 2022
12 Nov 2022
Amount
Attending all type of electric complaints in the blocks/qtrs/lines/offices in the OTM/Md Accn due to any reasons like MCBs/MCCBs burnt out/tripping, leakage fault, short/open circuit faults, electric fittings/fixtures, all type of controls, controls of garden/street lights,controls of summer and cooling appliances i.e Fan , Exhaust Fan , Wall Fan ,Geyser etc.with rectification and restoring the supply by deploying trained electricians and helpers complete all as specified and directed for the following area :-
North complex OTM/Md Accn Area (Tones View,Polo View,Golf View,Golf Course, OffIcers Mess , C Cell E/M,C Cell B/R ,Asiana,AGR, P-1 TO P-19,Gate No-6 ,VEG Shope,NIZAM, ACC Office , Poorvi Gate ,Mech Line ,Triangle Line ,CHETWOOD,QM , North Gate,CSD,Cafeteria,COLLINS Blk,Kingsley,Grocery shope,Account Sec , Printing Press Drill Ground /Office, Hoshiyar Singh Gym, Tele Exch,Qtr Guard ,Civil Establishment,DSC Guard Room , Mandir POst ,TA BN ,DSC,Raman Hostle,Section Hospital,Acadmic Block,Band Line,SBI,Gass Godwon,Post Office,UA Office,CLK Welfare Center,Pumps house,Section Hospital). (Approximate area 4 Km & Back)
CR camp (Md Accn),GE Office and Subdivn,WT Area,GD Platoon, DEMO-I,DEMO-II, JCO Mess,JCO Living ,ACC Mess Area,STAND –I,STAND –II,Helipad Area,Bamboo Post,Kali Mandir,Old ACC Building,Pumps house and Guard Post). (Approximate 4 Km & Back)
Notes:- All the T&P items like aluminium folding self supported ladders as per site requirement, drill machines with bits, cutting plier, spanners, Allen key Set, Pipe wrench, Screw driver Sets, Crimping tool,descaling rod, etc will be provided to electricians by the contractor. The cost of T&P shall be inciuded in quoted rates and no extra cost will be paid by department. Tool Bags required for attending the complaint shall also be provided by contractor.
All the stationery i.e complaint register, job card dockets and other connected register related to the work shall be arranged and to be maintained by the contractor.
Stores required for day to day maintenance for all repair work provided by the contractor through this contract which shall be measured and paid separately. All sundries items like Insulation Tape, Screws, washers, Plastic wall rawal plugs, Nuts, Bolts, dummy plates, thimbles for coper wire etc shall be supplied/ arranged by the contractor without any extra cost to Govt.
All the retrieved material shall be the property of Contractor with credit as shown on credit schedule.
Contractors are advised to visit the site before quoting rates.
Contractor shall be penalised @ Rs. 250.00 per complaint/ day, if he fails to attend and rectify the complaint within 24 hours of lodging the complaint either personally or telephonically. In this regard the decision of the Engr-in-Charge shall be final & binding.
The employed electrician should be qualified in concerned trade and shall have minimum 03 years experience.
Work shall be carried out as per modern engineering practice and contractor to maintain record register, duty roster, attendance register etc complete alongwith general tool safety measures on conveyance/ transportation etc.
All workers employed by the contractor in day to day maintenance is mendatery to wear proper uniform .
Conractor also provide the almirah to the electricition employed under the contract to keep their tool bags /stationary etc in safe custody.
Unit rates also include the conveyance and communication faicility is requried for complete the Job.
S & F in repairs sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unsv submain wiring of following sizes complete all as specified and directed:- Make: Finolex, Polyacab, GEMSCAB Note:Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.
2 x 10 Sqmm + 1 x 10 sqmm
2 x 6 Sqmm + 1 x 6 sqmm
2 x 4 Sqmm + 1 x 4 sqmm
2 x 2.5 Sqmm + 1 x 2.5 sqmm
4 x 6 Sqmm + 1 x 6 sqmm
4 x 10 Sqmm+ 1 x 10 sqmm
S & F in repairs Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt ,suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity including taking down old unsv MCCB DB,s and making good the distrubed surface complete all as directed:- Note: Suitable MCCB and outgoing MCBs will be measured and paid separately under relavant items of this schedule)
4 Way VTPN DB (FP MCCB +12 MCB,C). Make :legrand Cat No. 507745 equvilent in L&T, ABB, Schneider
8 WAY VTPN DB TP&N DB(FP MCCB +24 MCB,s) Make :legrand Cat No.507747equvilent in L&T, ABB, Schneider
S & F in repair MCCB ,4 pole ICS=100% ICU at 415 volts with rupturing capacity 25 KA with thermal-magnetic release and adjustable overload setting . The MCCB shall have a Mechanical life = 40000 operations & Electrical life = 8000 operations of following capacity complete all as directed. Make: Legrand, L&T, ABB, Schneider
S & F in repairs MCB,S SP/SPN complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of following capaity. Make: Legrand, L&T, ABB, Schneider
MCB SP 6 to 32 Amp 240 volts
MCB SP 40 to 63 AMPS 240 volts
MCB SPN 6 to 32 Amps 240 volts
MCB SPN 40 to 63 Amps 240 volts
S & F in repair MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity . Make: Legrand, L&T, ABB, Schneider
4 way SPN DB.
8 way SPN DB.
12way SPN DB
16 way SPN DB
S & F repairs sheet metal enclosure, Triple pole and neutral with three pin and earth plug and socket with and including one triple pole MCB 32 Amps, 240 volts,10 KA , including taking down old unsv sheet metal enclosure complete all as directed. Make: Legrand, L&T, ABB, Schneider, C&S
S & F in repairs sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, , complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided at the time of bidding Make: Legrand, L&T, ABB, Schneider
S&Ffan regulator modular step type 120W 240 volts 2 module type complete including taking down old unsv fan rgulator all as directed. Make: Anchor, Legrand , Havells
S&F Modular switch single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), .
S&F Modular switch single pole one way 16 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S&F Modular socket outlet 2/3 pin combined 6 Amp 240 volts including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S&F Modular socket outlet 2/3 pin combined 16 Amp 240 volts including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S&F Modular bell push flush type, 5 Amps including taking down old unsv bell push complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S&F Bell push flush type, 5 Amps including taking down old unsv bell push complete all as directed. Make: Anchor, Legrand, Havells,
S&F white modular cover plate with frame of following module complete including taking down old unsv modular cover plate with frame all as directed. Make: Anchor, Legrand, Crabtree (Havells) :-
1 Module
2 Module
3 Module
4 Module
6 Module
8 Module
S&F modular metal flush box of following module complete including taking down old unsv modular metal flush box with frame all as directed. Make: Anchor, Legrand, Crabtree (Havells)
1Module
2Module
3Module
4Module
6Module
8 Module
S&F in repairs Bell AC 230 volts single pole complete all as directed. Make: Anchor, Legrand, Havells,
S&F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body including taking down old unsv ceiling rose complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay
S&F Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make: Anchor, Bajaj, Crompton,
S&F Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings including taking down old unsv batten holder complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay, Plaza
S&F switch piano, flush type, single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Havells,
S&F switch piano, flush type, single pole one way 16Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Havells
S&F socket out let, multipurpose, 2 in 1 5 pin, 6 Amp including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Havells
S&F socket out let, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Havells
S&F in repair Electronic step rotary type fan regulator 1000 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make: Anchor, Bajaj, Crompton, Havells
Supply and fix in repair industrial hanging bed switch 5/6 Amps ,230 Volts. Make: Anchor/ Legrand/ Havells.
S &F Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting swich, socket fan regulator etc including taking down existing unserviceable bakelite sheet cover complete all as directed. Make: Hylam, Woodlite, Mylam
S & F 1100 volts grade heavy duty twin flat cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed including taking down unserviceable complete all as directed. Make: Finolex, Polyacab /GEMSCAB
S & F single phase electronic meter temper proof LCD display with polycarbonted cover 230volt ,10 A to 60 Amps ,accuracy class-I 50 Hz ,confirming to IS 13779,ip-54 with parameter to show data time ,current reading ,load PF ,voltage and KWH including taking down unserviceable and deposite to the MES Storeyard complete all as directed. Make:LEGRAND, L&T, Secure.
S & F three Phase electronic meter temper proof LCD display with polycarbonted cover 415 volt ,10 A to 60 Amps ,accuracy class-I, 50 Hz ,confirming to IS 13779,IP-54 with parameter to show data time ,current reading ,load PF ,voltage and KWH including taking down unserviceable meter and deposite to the MES Storeyard complete all as directed. Make: LEGRAND, L&T, Secure.
S & F flexible cable 3 core 23/0.0076 multi stranded copper conductor white/ black colour code including taking down unserviceable complete all as directed. Make: Finolex, Polyacb, Havells
Supply and fix in repair Exhaust fan 300 mm sweep, 1200 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. Make : Havells /CG /Bajaj
S & F single core FR-LSH PVC insulated copper multi stranded conductor cable drawing into existing PVC rigid conduit in surface/concealed as required, including taking down unserviceable existing wiring etc complete of following sizes as directed. Make: Finolex/Polycab/GEMSCAB
S & F pressed steel sunken terminal boxes 1.6 mm thick, 60 mm including brass screws and cup washer of following size for mounting switch, socket fan regulator etc including taking down existing the existing unserviceable sunken terminal boxes complete all as directed. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.
Supply and fix Rigid non metalic PVC conduit of , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks including taking down old unsv pvc conduit all as specified and directed. Make of conduit: Finolex, Ess Ess Kay, ICL, AKG.
40mm dia
32mm dia
25mm dia
20mm dia
Supply and fix PVC rectangular block white in colour for mounting Switch,Socket,fan regulator etc. with 3mm thick plastic laminated sheet cover of size s including taking down old unsv rectangular block all as directed.
100mmx100mm and 50mm deep
175mmx100mm and 50mm deep
Supply and fix in repair PVC Casing Caping inclusive of all tees,bend ,elbow and fixing acessories including taking down old unsv pvc casing caping all as specified and directed. Make of conduit: Finolex, Jindal, Modi, Asian,AKG
50X20 mm dia
38 X 20mm dia
32X 16 mm dia
25 X 16 mm dia
S & F in repairs Bulb LED 2.7 W, E-27 base,220v- 240v ,50 HZ all as specified and directed.
S & F in repairs Bulb LED 3 W, E-27,220v- 240v ,50 HZ base all as specified and directed.
S & F Bulb LED 5 W, E-14 base, 220v- 240v ,50 HZ ,including taking down old unsv led bulb all as specified and directed.
S & F Bulb LED 9 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed.
S & F energy saving LED Bulb 14 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed.
S & F Bulb LED 5 W,MR-16,GU5.3 base,220v- 240v ,50 HZ including taking down old unsv led bulb all as specified and directed.
Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade follwing crosectional area fixed on wall or burried in ground up 30 cm in PVC pipe including taking down old unsv cable all as specified and directed. Make: POLYCAB/RR Cable/ Finolex/KEI INDUSTRIES
6 Sqmm x 2 Core
10 Sqmm x 2 Core
16 Sqmm x 2core
25 Sqmm x 2 core
Supply and fix in repair Exhaust fan 250 mm sweep, 1200 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. Make : BAJAJ/HAVELLS /CROMPTON
S & F wall mounted Fan 400mm sweep ,2100 RPM high speed and 105CMM Air Delivery,strudy base and thermal overload protection ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, etc including taking down old unsv wall mounted fan complete all as specified and directed. Make : BAJAJ/HAVELLS /CG
Supply and fix wall mounted double mashal light fitting made of brass housing and polycarbonated material white suitable for 12 W LED lamp with and including 12 W LED lamp complete with all acessories ,prewired and including connecting up with twin core twisted flexible copper cable with suitable size complete all as specified and directed by Make - Havells,Eveready,Philips.
Supply and Fixing in repair LED Batten light fittings on walls including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-22 watts/total system lumen not less than 2200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets conforming of technical spscifications. Make: - PHILIPS CAT No. BN021-LED 22S PSU CW GR /EVEREADY/WIPRO
Supply and Fixing LED Batten light fittings 2 Feet on walls including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-12 watts/total system lumen not less than 1200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700(COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets report conforming of technical spscifications . Make: - PHILIPS CAT No. BN021-LED 12S 6500 PSU GR /EVEREADY//WIPRO
Supply and Fixing LED Suspended Batten light fittings on walls including hanging brackets ,all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-34 watts/total system lumen not less than 4000 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 115lm/watt. (ix) Colour temperature (K): - Not less than 6500 ( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT No. BN100-LED 40S PSUL120 GR /Havells /WIPRO/EVEREADY
Supply and Fixing LED Up Down twin glow 20W + 20W Batten light fittings on walls including brackets , all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 2000 lm on each side (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 on Down Side & 3000K on Up Side( COOL DAY AND WARM WHITE LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 160-360V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5 KV (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the data sheet report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS/EVERAEADY//WIPRO
Supply and Fixing LED 1 x 1 feet Surface Mounted light fittings on Ceiling including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 1600 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - Ceiling Mounted (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. Make: - PHILIPS Cat No. SM200C LED 16S 6500 PSU OD WH /CG/WIPRO
Supply and Fixing LED street/Security light fittings on poles/Wall including mounting brackets all as conforming to the following parameters including taking down old unsv Light fitting : - (i) Syatem watt/Lumens: - Max-25 watts/total system lumen not less than 3000 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers Make: - PHILIPS Cat No BRP046 LED30 CW MR S1 PSU GR/EVEREADY/WIPRO/CROMPTON
Supply and Fixing LED 2x2 Recessed Mounted fittings on armstrong/Geypsum Ceiling including taking down old unsv recess mounted fitting all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 30 watts/total system lumen not less than 3600lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Armstrong as well as geypsum ceiling. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers. Make: - PHILIPS Cat No RC380B LED36S 6500 G6 L60 W60 PSU OD/ECOLINK/WIPRO/CROMPTON
Supply and Fixing LED Round/Square Surface Mounted Downlighter fittings on Ceiling including taking down old unsv LED down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 18 watts/total system lumen not less than 2000 lm (ii) Housing: - Single Piece body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 30000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS Cat No SM 251 C LED 20S 6500 PSU WH/EVEREADY/WIPRO/CROMPTON
Supply and Fixing LED Round/Square Surface Mounted Downlighter fittings on Ceiling including taking down old unsv down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 15 watts/total system lumen not less than 1500 lm (ii) Housing: - Single Piece body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 Or not less 3000 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 30000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS SM 251 C LED 15S 6500 PSU WH/EVEREADY/WIPRO/CROMPTON
Supply and Fixing LED Round Recessed Mounted Downlighter fittings on recessed Ceiling including taking down old unsv led down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 15 watts/total system lumen not less than 1500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Recessed ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 or Not less than 3000 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT No DN 296 B LED15S 6500 PSU WH/EVEREADY/WIPRO/CROMPTON
Supply and Fixing LED Bulk Head fittings on surface /Ceiling including taking down old unsv led bulk head all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 10 watts/total system lumen not less than 1100 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK09 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Surface / ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO WT202W LED10S CW PSU S2 PC/WIPRO/CROMPTON/EVEREADY
Supply and Fixing LED Flood Light fittings with complete fixing arrangemnets including taking down old unsv led flood light all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 50 watts/total system lumen not less than 5000 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO. BVP180 LED50 CW PC WB 50W /Havells/WIPRO/CROMPTON/EVEREADY
supply and Fixing LED Flood Light fittings with complete fixing arrangemnets,including taking down old unsv led flood light all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 120 watts/total system lumen not less than 14500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: -Outcutt off @325V, 440V phase 2 phase protection, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO . BVP192LED145 CW NB FG GR PSU/ECOLINK/WIPRO/EVEREADY
Supply and fix in repair LED inverter bulb 9 watt retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours, high efficiency high lumens output ,including taking down old unsv led bulb complete all as specified and directed. Make: Crompton Cat Part No. LSL-6- WW or equivalemt in Philips/Wipro/EVEREADY
Supply and Fixing town glow LED Post Top fittings,including taking down old unsv led post top fitting all as conforming to the following parameters: - (i) System watt/Lumens: - Max-25 watts/total system lumen not less than 2800 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK10 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Polycarbonate Diffuser (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence Make: - PHILIPS Cat No BGP300 LED28S 757 PSU PC IN S1 /CG/WIPRO/Havells/EVEREADY
Supply and Fixing LED Bollard fittings,including taking down old unsv led bollard fitting all as conforming to the following parameters: - (i) System watt/Lumens: - Max-8 watts/total system lumen not less than 300 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 65 & IK10 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On the surface (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 40 lm/watt. (ix) Colour temperature (K): - Not less than 3000 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 25000 Hrs of operation @ Ta 35*C (xii) Optics: - Polycarbonate Diffuser (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence Make: - PHILIPS Cat No BCP151 LED150/WW PSU 220-240 7043/CG /WIPRO/EVEREADY
Supply and Fixing LED 1 x 1 feet recess Mounted light fittings on receesed Ceiling including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-18 watts/total system lumen not less than 1440 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - recessed mounting (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2 KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. Make: - Havells Cat No. pluto 1x1PLR18WLED857S /EVERADY/WIPRO
Supply and Fixing LED 2 x 2 Surface Mounted fittings all as conforming to the following parameters including taking down old unsv fitting : - (i) Syatem watt/Lumens: - Max 35 watts/total system lumen not less than 3200lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface mounted (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 90 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - NA (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers. Make: - PHILIPS Cat No SM365LED32-6500 PSU OD WH /WIPRO/CROMPTON/Havells/EVEREADY
Supply and fix exhaust fan ,steel body AC single Phase 230 Volts of size 300 mm sweep,1400RPM with blades and frames and louvers including taking down old unsv exhaust Fan. Make : Almonard /Crompton/Bajaj
S& F metal finished bed side lamp grey in colour 2 Watt /50 Lumens/3000K, base of the lamp should be E27 and dimension of fitting 470x67x28 mmand connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make: Philips Cat part No. 30975 or equivalent to Havells/Wipro/EVEREADY.
Supply and fix Metal finish wall light with maximum bulb wattage 20 watt, base of the lamp should be E27, colour of the fixture is white & silver wsith chrome finish and having rectanguar shape for aesthetic look. dimension of the fixture should be 100 x 125 x 200 mm and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make: Philips Cat part No. 31455 or equivalent to Havells/Wipro/EVEREADY
Supply and fix Metal finish wall light with maximum bulb wattage 20 watt, base of the lamp should be E27, colour of the fixture is white & silver wsith chrome finish and having rectanguar shape for aesthetic look. dimension of the fixture should be 125 x 150 x 240 mm and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make: Philips Cat part No. 58070 or equivalent to Havells/Wipro/EVEREADY
S & F in repair MCB TP/TPN complying to IS/IEC 60898, 415 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 63A to 100A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided at the time of bidding of following capacity Make: Legrand, L&T, ABB, Schneider, C&S.
MCB TPN 63 Amps, 415 volts
MCB TPN 100 Amps, 415 volts
M & L for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting etc .
S & in repairs Ball Bearing suitable for ceiling fan of sweep 1200/1400 all as specified & directed for following sizes. Make SKF/NBC/TATA
Ball bearing No. 6201
Ball bearing No. 6202
Ball bearing No. 6203
Ball bearing No. 6204
S& F in repairs Reel insulator of hard rubber of suitable size for ceiling fan complete all as specified and directed.
S& F in repairs PVC canopy with screw of suitable size for ceiling fan complete all as specified and directed.
S& F in repairs down rod clamp in one or two piece with split pin ,bolt,nut and washer as per sample of suitable size for ceiling fan complete all as specified and directed.
S& F in repairs bolt,nut and washer set 10 mm dia ,75mm long as per sample complete all as specified and directed.
S&F in repairs Down rod of rigid steel cunduit of 15mm dia 60cm long for hanging fan with two cut in end of one side pipe approx length 1/2" to 2" and two holes for entering flexible cable both side complete all as specified and directed
S&F in repairs Down rod of rigid steel cunduit of 15mm dia 90cm long for hanging fan with two cut in end of one side pipe approx length 1/2" to 2" and two holes for entering flexible cable both side complete all as specified and directed
S&F in repairs Split pin of suitable size fixed on nuts & bolts complete all as specified and directed
S&F in repairs Metal ceiling fan blade suitable for 1200 to 1400 mm sweep as per sample complete all as specified and directed
M&L for Capacitor 2.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed.
M&L for Capacitor 3.15 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed.
M&L for Capacitor 04 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed.
M&L for Capacitor 1/1.5 mfd 230 volt AC 50 HZ suitable for ceiling fan/ exhaust/cabin/table fan of any sweep fixed in repair complete all as specified and directed.
S&F Heating element 230 volt, ISI marked, as per sample for storage type electric water heater including taking down existing unserviceable element complete all as specified and as directed of following capacity . Make-Newton/Theta/Dashmesh.
2 KW 230 volt,round /triangular type
2.0 KW 230 volt, square/rectangular type
3 KW, 230 volts ISI markded Round shape base .
S&F Thermostat switch 220- 240 volt 16 Amp 0-75° /80° C ISI marked as per sample suitable for round including taking down existing complete all as specified and as directed. Make : Newton/Theta/Bajaj
S&F Indicating lamp 230 volt AC for geyser fixed in repair of Green & Red colourcomplete all as specified and as directed..
S&F Heavy duty PVC connection with 15mm dia 450mm long with CP brass nuts and leads PVC washer 02 Nos on each ends for geyser connection fixed in repair complete all as specified and as directed.
S&F Heavy duty PVC connection with 15mm dia 600mm long with CP brass nuts and leads PVC washer 02 Nos on each ends for geyser connection fixed in repair complete all as specified and as directed.
S&F Chromium Plated PVC connection with washer and bolt, size 15mm dia, 450mm long including taking down existing complete all as directed.
S&F Chromium Plated PVC connection with washer and bolt, size 15mm dia, 600mm long including taking down existing complete all as specified and as directed.
S&F Metal clad Industrial plug top ISI mark, 3 pin with earth, 230 to 250 Volts including taking down existing complete all as specified and as directed.
S&F Metallic fastener 75mm long 8mm dia with bolt for hanging Geyser complete all as directed.
S & F fastener , 100 mm long,8mm dia complete set with nuts & washers as specified & directed
S&F Multifunction safety valve cast copper alloy 15 mm dia ISI marked complete including taking down existing valve complete all as specified and as directed.
S&F 3 Pin plug top 15 amps complete ncluding taking down existing top complete all as specified and as directed.
S&F for Non return valves cast copper alloy 15 mm dia ISI mark complete including taking down old existing NRVcomplete all as specified and as directed.. Make - Zoloto/Leader/Kirloskar
S&F stainless steel chromium plated assembly ISI marked as per sample suitable for water heater of capacity 25/35 ltrs including taking down old unsv stainless steel chromium plated assembly complete all as specified and as directed.
S&F stainless steel chromium plated assembly as per sample suitable for water heater of capacity 50 ltrs including taking down old unsv stainless steel chromium plated assembly complete all as specified and as directed.
S& F in repairs Ball Bearing suitable for exhaust Fan /Wall fan all as specified & directed for following sizes. Make SKF/NBC/TATA
Exhaust Fan/Wall fan 250 to 300 mm
Exhaust Fan/Wall fan 350 to 450 mm
S & F in repairs Exhaust fan blade metal/plastic set suitable for 250 to 300mm sweep as per sample complete all as specified and directed
S&F for in repairs Exhaust fan blade metalic set fan/wall mounted suitable for 450/600mm sweep as per sample complete all as specified and directed
S&F for Louvers for exhaust fan of 450mm sweep fixed in repairs on wall complete all as specified and directed
S&F for Louvers for exhaust fan of 300mm sweep fixed in repairs on wall complete all as specified and directed
S&F in replacement aluminium thumble/ lugs of follwing sizes armoured aluminium conductor
10Sqmmx2 core
16Sqmmx 4 core
35Sqmmx3,5 core
50 Sqmmx3.5 core
25 Sqmmx3.5 core
M/s Anamika Enterprises
M/S K K ENTERPRISES
BK CONSTRUCTION
JAIN BUILDERS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .