8356 MAINT AND REPAIR TO CERTAIN LEAKAGE / SEEPAGE, PCC FLOORING, BRICK, PLASTERING WORK, ROOFING, JOINERY, TILING OF WALL / FLOORING, SANITARY AND PLUMBING WORKS INCL INT ELECT IN OTM/MD ACCN OF 6 MDSR AND DIV PRO UNIT UNDER GE(EAST) BAREILLY.

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.

Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed.

M&L for PCC Type B1 (1:2:4) for copings on brick wall surfaces / interlocking paths /cherequred tiles including weathering, slightly rounded or chamferred angles and throating , as directed.

Marble work 18 to 20mm thick (table rubbed and polished) insteps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of approved types complete all as specified as directed.

M&L 18 mm thick granite of black colour (table rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete tiles 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in repairs for Machine pressesd pre-cast cement concrete kerb stone of M-25 grade in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required including weathering, slightly rounded or chemferred angles and throating including excavation for kerb stone complete all as specified and as directed.

M&L for precast cement concrete louvres and jallies 1:2:4, type B0, (using 12.5 mm graded crushed stone aggregate) 25mm thick (measured solid) including fixing with all molding post frame all as specified and directed. Note:- Design of RCC Jalli shall be approved by GE

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm inculding mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment including mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note for item No. 33 & 34: The Cost of Water proofing liquid shall be deemed to be included in this item)

M&L PCC 1:5:10 type E-2 as sunken sub base of floor fillings with broken brick agg complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hositing if required reconnecting and re-fixing in position complete all as spd and directed.

S&F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specifed as directed

S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F wire mess shall be measured and paid for separately)

S&F 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as directed.

S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 18 mm thick imported pine wooden medium density fibre board fixed with frame icluding hold fast (as in shutter incl knob in each shutter) etc including magnet catcher built board with all necessary fittings complete all as specified and directed

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x 38mmx 1.48 mm thick, 3 mm thick aluminium composite panel into the wall for kitchen cabinet/ cupboard shelf with aluminium clip/strips/beading with rubber gasket , design as pe site requirement basis, complete all neccessary fitting complete all as specified and directed.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F for steel windows / ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Wire cloth shall be measured and paid for separately).

S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos, MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including Hacking out old, broken glass (any thickness,) size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu marked or its equivalent approved make) (f) Making good of wall surface to match with existing surface complete.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box section complete all as specified and directed as appended below:- (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium specified and directed as appended below:- (i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium sliding windows and frame with movable shutter (sliding on minimum two PVC roller of best quality on two tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame : 63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm x 78.2mm grills thickness shall be of 6.4mm x 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 x 11mm x 1.7mm thick fixed with screw inside of the window complete all as specified and as directed.

S&F roller / venetian blinds vertical / horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed.

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking ,handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass, off cuts complete with finishing wall in CM 1:4, designed approved by GE.

M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted/ ordinary glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Providing & fixing 10mm thick plaster of paris false ceiling bending as required shape with two coats of plastic emulsion paint over a coat of primer on decorated surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @750 mm C/C cross member 'U' shaped @450 mm c/c and perimeter of 'C' shaped GI wire mesh having aperture 6.5 mm with 26 gauge wire GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension, fastner spaced @ 450mm c/c in both direction the 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 Mtr height as required at site complete all as specified and directed.

S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cum density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed.

S&F in repair 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F in repair 300 mm long brass sliding door bolts without locking arrangement with screws in internal shutter of bldgs complete all as spd as directed

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55 X45 X 82cm complete including fancy CP pillar tap, CP Waste coupling, waste pipe, complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Model : WHB - Cat No 10072, Pedestal- Cat No. Ped 11029 Neptune of Hindware, Parryware Cat No C0480 (SP) 181/CTH ,C 0375 pedestral, Cera Cat No Cat No 2090107Ped , Cat No S 2040112 WHB ".

S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make hindware of Ripple star white cat No 91080, Parryware Cat No C0483, Cera Cat No FLS-WHT-0575 .

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1

S&F Brass chromium plated wall mixer 2 in 1,15 mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Cat No FUS - 29273 UPR of Jaquar, Hindware Cat No F390020, Cera or Parryware Cat No G0216A1,

S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed. Model :ARI 39001B Aria of Jaquar, Hindware Model No F280010 SCP, Cera Model No F2013451

S&F in repair fancy type 150mm size square brass CP shower rose all as specified. Model No F 7010305 of Cera, Hindware Model No F160006, Parryware Model No T9985

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed. Model : FUS 29037 Fusion of Jaquar, Parryware model No G2304A1, Cera model No F101151

S&F Brass CP Hand Shower with 15mm Dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed. Model No :- HSH-1931 of Jaquar , Hindware Model No F160053, Parryware Model No T9982A1

S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange complete all as specified and directed. Model: FUS 29041 Fusion of Jaquar, Parryware model No G2381A1, Cera model No F1014161 ".

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.Make hindware or equivalent

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160 x 160 x 90 mm, complete all as specified. Make Jaguar or equivalent as approved by GE

S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed. Model No :- ACN -1181N of Jaquar ,Parryware Model No T6008A1, Cera Model No F5003102

S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified. Model No ACN 1121N Jaquar, Parryware Model No T/6002A1, Cera Model No F5002105

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. Model: ACN - 1171N of Jaquar or equivalent in Parryware model No T6009A1

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . Make: Prayag / Cera or equivalent as approved by GE

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed

S&F in repair 15 mm dia fancy type stop cock, chromium plated with long shank and cup (conncelaed type) for iron pipe or for unions and fixed complete all as spd as directed

S&F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360 x 675 x 750 mm, S Trap-300 mm including making good to floor complete all as specified and directed. make Jaguar or equivalent as approved by GE

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified. Model : ARI -39053 of Jaquar,Hindware Model No F320006, Parryware Model No G4907A1

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make Hindware / parryware or equivalent as approved by GE

S&F in repair vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed. Model:- CNS-WHT-WH-10(seat), CNS-WHT-WCN1 (seat cover) Jaquar, Parryware Model C 0297(seat) & E-8071 (seat cover), Cera Model NO S1050101(seat) & B-1510119( seat cover)

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model: Sleek fresh dual flush of Hindware Model No Pastel size 47.6x15.5x32 , Parryware Cat No 8177*, Cera Cat No B1810110 snow white"

S&F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed. Model :ALD 573 of Jaquar ,Hindware Model No F160002, Parryware Model No T9961A1"

S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F in repair PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. Make:- Prayag Cat Part No. 551 of or equivalent model as approved by GE

S&F in repair 0.8 mm thick stainless steel kitchen sink size 590 x 460 x 230mm under mount, single bowl (bowl size 540x410x230 mm), incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. Model : Cera Cat No B 4711501- satin finish series alma , Parryware Cat No C852399, Kaff Cat No KS610SB (R10) Marco series

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F 0.80 mm plain galvanised Mild steel sheeting in ridge, hips, valley gutter,drip and straight flashing class 8 with zink coating @ 120 gms/sqm fixed with L- type or J- type or cranked hooks bolts complete all as specified and directed.

M&L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja (up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled also complete all as specified and as directed.

S&F Framed work as in doors, gates & Stairs of angle or other section with gusset plates, rails, braces, etc., complete,drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as specified and as directed.

M& L for preparation of newly plastered wall surfaces and appltying three coats of texture (Domasc/Rustic) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over 1mm thick cement based in double layer wall care putty complete all as specified and directed.

M&L applying two coats of Apex paint over a coat of primer on old decorated or undecorated Roof/Wall surfaces/jaffery including preparation by brooming down or steel wire brushing, scrapping down, brushing, washing rubbing down and stoping of distempered and painted surfaces, complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick (JK/Birla) wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1mm thick double coat (JK/Birla) wall care putty complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over one coat primer complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L Machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick screed bed laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and treating the surface complete complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etccomplete all as specified and directed.

S&F in repairs, wall mounted censor urinal size 370x315x620 with all fixing Accessories complete all as specified and directed.

S&F shower panel of required size including all neceassry fittings on walls complete all as spd and directed .Note- design/size of shower panel will be approved by ge .Make- jaquar or equivalent

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socke out let t point on same board board

One light point controlled by two Nos of 2 way switches

One 5A flush type switch socket point on independent board

All as per Srl item No 142 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified & as directed.

S&F switch piano flush type single pole, two way 5/6 Amps complete all as specified & as directed.

S&F switch piano flush type single pole, one way 15/16 Amps complete all as specified & as directed.

S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified & as directed.

Supply and Fixing in repairs buzzer, capton ding dong, AC, 230V, sigle pole complete all as specified & as directed.

Supply and fixing bell push switch flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs socket outlet, 3/5 pin 5 amp flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs socket outlet 2 in 1, 3/5 pin 5 and 15 Amp flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 16 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular sockets 6 A,-2/3 pin combined 2 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 8'' X 11'' including cutting of sheet for fixing switch / socket.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket, complete all as specified & as directed.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket, complete all as specified & as directed.

Supply and Fixing in repairs MCB SPN 20 to 32 Amps 240 volts.10kA , complete all as specified & as directed.

Supply and Fixing in repairs MCB SP 6 to 32 Amps 240 volts, 10 kA, complete all as specified & as directed.

Supply and Fixing in repairs MCB TPN 63 Amps,415V, 10kA, complete all as specified & as directed.

S &F in repair MCCB 16 kA,125 Amp thermal magnetic and electronic earth leakage module complete all as specified and directed.

M & L in repair Sub main wiring concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 2.5 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

M & L in repair Sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

S&F in replacement sheet metal enclosure DB's 415 Volts, IP-42, vertical suitable for mounting MCCB's, TPN, 4 way with 200 Amps rated copper bus bar complete all as directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 20watt 4 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed.

S&F in repairs building security light led type 20 W including GI angle of 20/25mm size of suitable size complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25 mm size with accessories including dismentaling/takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed.

S&F LED mirror light fixture 9W LED 6000K complete all as specified and directed.

Supply and Fixing in repairs in replacement PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm, 1100 V grade, complete all as specified & as directed.

Taking down and refixing ceiling fans 1200/1400 mm sweep & removing/cleaning of dust properly, oiling and greasing of bearing including re-fixing and connecting up with all requisite accessories complete all as specified and directed.

Taking down and rifixing exhaust fan of 450/300 mm sweep and removing/cleaning the dust properly including oiling and greasing complete all as directed.

Re-winding of ceiling fan burnt motor of 1200/1400 mm sweep including internally and externally cleaning of fans and removing the burnt coil and re-winding of fans by super enameled copper wire of appropriate size, make (ATLAS) or equivalent and re-assembling the fans and connecting with flexible copper wire of one mtr length and testing after repair complete all as specified and directed.

Re-winding of exhaust fan burnt motor of 450/300 mm sweep with appropriate size of super enameled copper wire, Make: ATLAS or equivalent including re-assembling the fans and connecting with flexible copper wire of one mtr length complete all as directed.

Supply and Fixing in repairs fan regulator resistance/electronic step piano type single phase 230 volt, complete all as specified & as directed.

Supply and Fixing in repairs Condenser 2.5 Mfd make universal/Usha /Bajaj/Epcos.

Supply and fixing name plate light smart decorative light of min. 6W of make C&S, Surya, Crompton or equivalent complete all as specified all as directed.

M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.

Supply and fixing LED post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover, Alumnium PDC heat sink, opal PC diffuser and clear acrylic Jupiter type of 40 watt, complete all as specified & as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections, complete all as specified & as directed.

Suply and fixing in repairs 1.5 sqmm FRLS multi-stranded copper wire as specified and directed.

Suply and fixing in repairs 2.5 sqmm FRLS multi-stranded copper wire as specified and directed.

Taking down of unserviceable bolt of existing geyser, M&L grouting of new bolt (tee type) at new place and refixing of geyser of any type and any capacity all as speified and directed.

M&L for replacement and re-filling of glass wool as per norms of different type of geysers complete all as specified and directed.

S&F in repairs heating element 2.0 KW as triangular type/ circular type as per sample all as directed.

S&F only new inner shell of geyser capacity 25/35 liters of suitable size made of copper sheet of 22 SWG complete with all suitable accessories complete all as specified and directed.

M&L for replacement of bottom cover in two parts of MS sheets not less than 22 gauge and pre treated in finished in white stove enameled paint as per existing size gauge in the geyser of any capacity/size complete all as specified and directed.

Supply only new safety pressure valve with vent to geysers as per latest ISI specification and directed.

M&L for Painting the outer surface of geyser capacity 25/35 ltrs as per original shade with two coats of synthetic enamel paint over a coat of primer by spray gun after scrapping the existing paint, denting etc. filling depression with putty and refixing the geyser in position including water/electric connection and testing complete all as specified and directed.

M&L for Brazing/ welding to inner copper tank at leaking spots up to five leakage of geyser of capacity 25/35/50 liters of any type and make of tank after checking up worn out nuts bolts and washers complete all as specified and directed.

S&F assemblly of geyser 25/35/50 ltr.capacity all as specified and directed.

Supply and Fixing in repairs Indicator lamp with new indicating lamp round/square, rectangular type as required at site, SP 230Volt all as specified and directed.

Supply and Fixing in repairs PVC connection flexible heavy grade 45 cm long complete with chromium plated flair nuts with washers at both ends suitable for GI tubing 15 mm bore complete all as specified and directed.

Supply and Fixing in repairs thermostat 0 to 90 degree, ISI marked, 15 Amps capacity automatic cut off at desired temp of suitable size for Geyser all as specified and directed.

Supply and Fixing in repairs Plug top 15 Amps all as specified and directed.

NETRAPAL SINGH (BID ID -3068483)

M/S SAJJAD HUSSAIN CONTRACTOR (BID ID -3075021)

shiv shakti contractor (BID ID -3069667)

UTTRAKHAND BUILDERS (BID ID -3070573)

j u enterprises (BID ID -3071012)

M/S R S Constructions (BID ID -3070109)

TRISHOOL ASSOCIATE (BID ID -3070132)

Shikhar ji Enterprises (BID ID -3081336)