835 Estimate for developmen...

Amount

Supply and fixing on position the approved Single Line Diagram framed in 1000 x 800 mm size glass frame and installed in main switch room as directed by Engineer Incharge

Supply of First Aid box as directed by Engineer Incharge

Supply of tool kit with 1 pair 11 KV rubber hand gloves as directed by Engineer Incharge.

Supplying and fixing standard shock treatment charts in English and Hindi duly framed and covered with glass as directed by Engineer Incharge.

Providing Safety mat made of elastomeric polymers Material (Class B) 1.2 M wide with thickness 2.5 mm to withstand 12KV dielectric strength AS PER relevant IS Code

Providing a mat made of elastomeric polymers Material (Class A )1.2 M wide with 2 mm thickness to withstand 1.1 KV dielectric strength AS PER relevant IS Code

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4 x 6 sq.mm.

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee`s with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray tee`s with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated powder coated of approved shade M.S. cable tray cross members with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4C x 10 sq.mm.

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 4C x 16 sq.mm.

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3.5C x 35 sq.mm.

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3.5C x 95 sq.mm.

Supply of following sizes of XLPE insulated Aluminium conductor strip/ wire Armoured: overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical specifications. 3.5C x 120 sq.mm.

XLPE Insulated Copper Armoured Cables 2C x 6 sq.mm.

XLPE Insulated Copper Armoured Cables 2C x 4 sq.mm.

XLPE Insulated Copper Armoured Cables 3C x 4 sq.mm.

XLPE Insulated Copper Armoured Cables 3C x 6 sq.mm.

XLPE Insulated Copper Armoured Cables 4C x 2.5 sq.mm.

XLPE Insulated Copper Armoured Cables 4C x 4 sq.mm.

XLPE Insulated Copper Armoured Cables 4C x 6 sq.mm.

Supply and making End termination with brass Single/ Double compression gland including providing and crimping of aluminium/copper solder less lugs/ferrules for XLPE/PVC insulated armoured power aluminium/copper conductor cables 1.1 KV grade of following sizes: SINGLE COMPRESSION GLAND FOR AI. AR. CABLE 4C/3C x 6/4 sq.mm.

Supply and making End termination with brass Single/ Double compression gland including providing and crimping of aluminium/copper solder less lugs/ferrules for XLPE/PVC insulated armoured power aluminium/copper conductor cables 1.1 KV grade of following sizes: Single Compression Gland for Cu. Cable 4C/3C/2C x 4/6/2.5 sq.mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade 4 X 10 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade 4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade 3½ X 35 sq. mm (32mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade 3½ X 95 sq. mm (45mm)

Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all necessary fixing accessories and effecting connections. Cu FLAT 50mmx6

SITC of 30W Post top with LED 3000K, 4000K, 5700K 240Vac CRI )80 MacAdam step 3 Dimension not less than Ø400 x 807 mm, Light Distribution 360° Electronic driver ON/OFF, IP rating IP65, Spun aluminium top cover Ø400 mm of 1.6mm thickness, die cast aluminium decorative knob on top, Mild steel ( Sand Blasting with zinc primer supporting arm integrated with die-cast aluminium base suitable for mounting Ø76mm OD pipe. SS fasteners. Pure polyester powder coated process : Acid treatment and pure polyester powder coating. Clear acrylic diffuser with controlled downward light emission. Lamp fixed position. Lumen efficacy should be minimum 120lm/W. This luminaire should contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire )56,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )88%, power factor )0.96, THD (10%, Surge protection 6KV.Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs - LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Conical pole with 4 mtr height with diecast aluminum cover, Continuously tampered circular pole made of Hot rolled steel flat ( E250 to IS 2062 :2011) 110-116mm Bottom Dia x 76mm Top Dia x 3mm thick. All pole sections are welded using Submerged arc welding technique by certified welders by using automatic machine with precised welding.The base plate of the of the pole shall be E 250 grade MS 250 mm x 250mm, 12mm thick confirming to IS2062:2011 shall be facilitated with elongated slots to suit the 500mm J-type M16 bolts, Grade 4.6 that shall be provided with suitable nuts and plain washers.Built-in control box with cast aluminum service door and safety rope and vandal proof arrangement. Die cast aluminum door is contoured to the shape of the pole with silicone rubber gasket. The control gear tray is pre-wired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation, manufacturer should supply die cast aluminum to cover the foundation bolts. Base plate made of steel grade E250 and foundation bolt of grade 4.6 . Must carry out Shot Blasting process (in-house)to remove surface impurities Like Rust, Dust, Oil and Chemical etc. The pole is coated with epoxy zinc phosphate primer and finished using environmentally stable powder coated (coating thickness 60-80 microns). After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer and pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options Make: K- Lite/Unilamp/Ligman/Shereder

SITC of 7m multi head pole with provision of 8X45W Led, With diffrent beam angle as per requirement, bottom should be in two parts dia 139.7mm and top dia 88.9mm, Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987.Pole section welded by certified welders using high end MIG welding processes.Two PDC aluminium service door 348mm height x 80mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating.The control gear tray is prewired with 2.5 Sq.mm cable, 6A MCB and 32A terminal connectors for loop- in / loop-out arrangement and Driver box.dee Mild steel mounting plate 250mm Sq x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M16 x 500mm bolts of grade 4.6. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension and weight are within plus /- 5% tolerance. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour optionsManufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of LED bollard with 3000K, 4000K, 5700K 230-240Vac CRI )80 MacAdam step 3, Input power : 16W, Height 895mm Light Distribution 360° Electronic driver ON/OFF LUMINAIRE TYPE, IP rating IP65 MATERIAL CHARACTERISTICS Extruded aluminium bottom pipe (grade 6063 with test certificate) Ø166 x 3mm thickness and die-cast aluminium top cover. SS fasteners. Pre treated silicone gaskets. Die-cast aluminium mounting plate Ø167 x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation. Hot dip galvanised foundation bolt. Mechanical resistance IK06. Pure polyester powder coated process : Acid treatment and pure polyester powder coating. Optical grade clear polycarbonate diffuser with controlled downward light emission. Lamp fixed position. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire ) 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )87%, power factor )0.95, THD (10%, Surge protection 3KV. Luminaire can be aligned on the mounting base plate around 360°. CE and BIS

SITC of Static White 3000K facade flood light luminaire made up Extruded aluminium housing and module with excellent thermal management heat sink and Mounting bracket made of CRCA sheet (3mm thickness) with polycarbonate optical cover should have minimum Dimension of 342 x 135 x 32mm, Must have option of antiglare visor. Power consumption should be between 115-120W at steady state full intensity luminaire, the luminous flux of the luminaire is upto 115 lm/W for 6000K BEAM - 12°/25°/40/60. The ingress protection is IP67 and impact resistance of IK08. The luminaire is integrated with high power module with CRI =70, SDCM=3. The luminaire should contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire L70B10 )84,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )90%, Power factor )0.95, THD (7.8%, Surge protection 6KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac.Adequate heat sink with proper thermal management shall be provided. Manufacturer must have in house manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of 9000mm Trio mast pole made up of circular mild steel pipe (grade YST 210), Post made up of two section Bottom section 139.7mm Dia x 3.6mm thick with 2500mm Height and Top section 114.3mm Dia x 3.2mm thick with 4784mm Height.The trio mast bracket is a split constructed type, Bracket stem made up of MS Pipe 88.9mm Dia x 2.6mm thickness with 1000mm height. Mild steel Triangle structure welded to the bracket stem, This triangle structure made up of 40 x 6mm thickness L-Aangle. 3 Nos. Sq12 Twisted rod connected to bracket stem and triangle structure. 70mm Dia x 700mm height cone fitted to top of the bracket stem.Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987.Pole section welded by certified welders using high end MIG welding processes. Vandal proof PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating.The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply.Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation.All dimension are within plus /- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer and pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options

SITC of 9000mm Trio mast pole made up of circular mild steel pipe (grade YST 210), Post made up of two section Bottom section 139.7mm Dia x 3.6mm thick with 2500mm Height and Top section 114.3mm Dia x 3.2mm thick with 4784mm Height.The trio mast bracket is a split constructed type, Bracket stem made up of MS Pipe 88.9mm Dia x 2.6mm thickness with 1000mm height. Mild steel Triangle structure welded to the bracket stem, This triangle structure made up of 40 x 6mm thickness L-Aangle. 3 Nos. Sq12 Twisted rod connected to bracket stem and triangle structure. 70mm Dia x 700mm height cone fitted to top of the bracket stem.Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987.Pole section welded by certified welders using high end MIG welding processes. Vandal proof PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating.The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply.Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation.All dimension are within plus /- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer and pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options

SITC of Recessed Underwater Input power : 6x2W recess mounted swimming pool luminaire for spot light. Beam angle 30°. Luminaire complete housing made of marine grade 316 stainless steel. ABS plastic installation housing for preparing the recess opening in wall. Step tempered glass of 8mm thickness. Hard wired for single colour 2 x 1.0mm2 3metres water resistant cable. Protection class IP68. Mechanical resistance IK08. Available colour temperature 3000K, Colour rendering index (CRI))80. SDCM-3 MacAdam.LED module with expected service life of at least 54,000 operating hours. Low Voltage at 24Vdc assures safety. Recommended installation depth upto 1meter below the water surface. Luminaire dimension : 180mm diameter x 78mm height. Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Static White 3000K surface mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. Clear toughened glass of 4mm thickness. Hybrid optics with lens and mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression.Power consumption should be between 10W to 12W at steady state full intensity luminaire should have minimum luminous flux of 1054 Lm. Color rendering index CRI = 80 and power factor of complete luminaire = 0.90, at white colour. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP65/66. Mechanical resistance IK06. Pure polyester powder coated graphite grey / anthracite grey / jet black. Available colour temperature 3000K / 4000K, Colour rendering index (CRI))80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire 113 x 84 x 494mm.Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to plus 50°C, Operating Humidity : 10%-90%. THD should be less than 10%.Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Static White 3000K, Should be rectangular compact and robust wall recessed luminaires for illuminating walls and stairs. Must be forward asymmetrical light distribution. Luminaire made of pressure die cast aluminum alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall/ stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class at least IP65 or higher. Mechanical resistance IK09. Pure polyester powder coated graphite grey/ anthracite grey/ jet black. Power consumption should be between 4W to 6W at steady state full intensity luminaire should have minimum luminous flux of 300-400 Lm, should be available in different colour temperature 3000K/ 4000K/ 5700K, Colour rendering index (CRI))80. SDCM-3 MacAdam. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Luminaire dimension: 130mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension: 124mm length x 83mm width x 70mm height. TManufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Square shaped UP-DOWN 2 x 6W. Dimension 150 x 100 x 210mm, Wall-mounted compact updown light, emission designed to use monochromatic Warm white (3000K) and Neutral white (4000K). Should be equipped with Hybrid optics with lens and mirror finish pure aluminum reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Extruded aluminum section with inner grooves to fix the top and bottom frame (grade 6063) Sq100 x 3mm thickness, die-cast aluminum glass fixing top and bottom frame Sq100mm (ADC12) with clear toughened glass diffuser of 4mm thickness with ceramic black coated on outer corner siliconed to frame. Die-cast aluminum heat sink for excellent thermal management. Single cable entrance via black PG7 cable gland, Die cast aluminum base for surface mounting on wall (ADC12). All external screws are made of stainless steel. Clear silicone gasket. Protection class IP65. Mechanical resistance IK07. Acid treatment and pure polyester powder coated graphite grey/ anthracite grey/ jet black. The luminaire`s built-in LED module are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21). Operating ambient temperature range is from -15°C to plus 50°C. Beam angle 15°/ 25°/ 40°, Colour rendering index (CRI))80. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency )85%, Power factor )0.95, THD (10%, Surge protection 4KV. Luminaire dimension: 150 x 100 x 270mm.Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of LED Neon Flex 3000K 24Vdc CRI )80 MacAdam step 3 Input power : 9W Dimension 1000 x 9.4 x 15mm Beam angle : 120° Electronic driver ON/OFF (External driver) CE and BIS LUMINAIRE TYPE Facade. IP rating IP65 MATERIAL CHARACTERISTICS Copper coated strip, Silicone moulded diffuser, End cap,Clip, LIGHTING PERFORMANCE Silicone moulded diffuser NEON FLEX. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire ) 50,000 hours at 40°C. Operating ambient temperature range is from - 15°C to plus 50°C. Driver efficiency )70%, Power factor )0.80, Surge protection 3KV. All complete including consumables required for installation. Sample should be submitted for approval from Architect/ engineer-in- chargeManufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Linear 3000K grazer 24Vdc CRI )90 MacAdam step 3 Input power : 20W Dimension Ø1005 x 25 x 32mm Light Distribution Symmetrical Electronic driver ON/OFF (External driver) CE and BIS LUMINAIRE TYPE: Facade encapsulated 3000K linear grazer IP rating IP67 MATERIAL CHARACTERISTICS High grade aluminium housing (grade 6063 with test certificate)1005 x 25 x 32mm. End cap, SS fasteners and Clip, Mechanical resistance IK07. LIGHTING PERFORMANCE:: Polyurethane Encapsulation clear diffuser Power grazer This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire ) 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )85%, Surge protection 3KV. Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Square shaped 6W . Dimension150 x 100 x 150mm, Wall-mounted compact up or down light single side, emission designed to use monochromatic Warm white (3000K) and Neutral white (4000K). Should be equipped with Hybrid optics with lens and mirror finish pure aluminum reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Extruded aluminum section with inner grooves to fix the top and bottom frame (grade 6063) Sq100 x 3mm thickness, die-cast aluminum glass fixing top and bottom frame Sq100mm (ADC12) with clear toughened glass diffuser of 4mm thickness with ceramic black coated on outer corner siliconed to frame. Die-cast aluminum heat sink for excellent thermal management. Single cable entrance via black PG7 cable gland, Die cast aluminum base for surface mounting on wall (ADC12). All external screws are made of stainless steel. Clear silicone gasket. Protection class IP65. Mechanical resistance IK07. Acid treatment and pure polyester powder coated graphite grey/ anthracite grey/ jet black. The luminaire`s built-in LED module are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21). Operating ambient temperature range is from -15°C to plus 50°C. Beam angle 15°/ 25°/ 40°, Colour rendering index (CRI))80. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency )85%, Power factor )0.95, THD (10%, Surge protection 4KV. Luminaire dimension: 150 x 100 x 150mm.Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM- 80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of White 3000K 3W In-ground with in built honey comb louvre symmetrical luminaire made up of die-casting with Ø39 x 67mm,the Ø39 front ring should be made up of stainless steel 316 grade front ring with silicone black gasket and toughened clear glass diffuser. The luminous flux of the luminaire is upto 169.06 lm for 3000K BEAM - 15°/25°/40. The ingress protection is IP67 and impact resistance of IK06. The luminaire is integrated with high power CITIZEN COB with CRI=80, SDCM=3, L70/ B10 @ 60000 Hrs. The integral constant current driver comes with the power factor greater than or equal to 0.9, total harmonic distortion less than 15% with operating efficiency greater than 80% and a surge protection of 2KV. The driver input voltage 240Vac at 50-60Hz, operating voltage of 100-277Vac and operating temperature of -20° ~ plus 40°C.Adequate heat sink with proper thermal management shall be provided. Operating Humidity : 10%-90%. THD should be less than 10%. Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

SITC of Linear PU encapsulated inground 3000K 24Vdc CRI )80 MacAdam step 3 Input power : 20W Dimension 1000 x 80 x 40mm Light Distribution Symmetrical Electronic driver ON/OFF (External driver) LUMINAIRE TYPE: Facade encapsulated 3000K linear grazer IP rating IP67, MATERIAL CHARACTERISTICS High grade aluminium housing (grade 6063 with test certificate)1005 x 25 x 32mm. End cap, SS fasteners and Clip, IK (Mechanical resistance) 10 Polyurethane Encapsulation translucent diffuser Power grazer This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire ) 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )85%, Surge protection 3KV. Manufacturer must have inhouse manufacturing facilities and NABL certified lab equipped with photo goniometer, IP, IK test facilities Make of LEDs -LEDs of CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG/LUMILED /NICHIA/CITIZEN, the fixtures proposed must have passed LM 79 and LM-80, latest Reports will be submitted post the issuance of LOA to the successful bidder and before the supply of material CE and BIS Certified. Make Ligman, K-Lite, Unilamp, Bega, Heper

Supplying and laying cable through GI pipe upto junction box including excavation and back filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to lighting fixture complete.

Supplying Volley Ball Pole pair Structure made of MS ISI Mark tubing two outer pole outer dia 88mm with wall thickness of 4.5mm inner pole OD 74.50mm Wall Thickness of 4.0mm Chromium plated with arrangement of holding the net wire heavy duty (Detachable/In grout) with Inbuilt height Adjustment/net wire tightening mechanism, Both with the help of a single key, properly padded, The height adjustment mechanism base on rack and pinion gear system for accuracy in adjusting the height. All system is concealed inside the poles as dust free environment for longevity. All System as per International Standard including Volleyball Net Sportiva Tournament

Supplying and fixing Tennis Court Pole pair Structure made of 80mm x 80mm MS pipe with special internal retched system for tightening the rope/net. All System as per International Standard including Tennis Net Sportiva Tournament

Estimate for providing and fixing of Air Walker Height 5 fit, Length 4 fit, Width 3 fit, Use Material -GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of Air Wheel Height 6 fit, Length 3 fit, Width 2 fit, use Material- rail GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of DOUBLE AB DOMINAL BOARD `Height 2.5 fit, Length 6 fit, Width 5 fit, use Material-GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of DOUBLE Parallel BAR Height 5 ft, Length 6 ft, Width 2.5 fit, use Material-GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting

Estimate for providing and fixing of LEG PRESS DOUBLE Height 5.5 fit, Length 6 fit, Width 2 fit, use Material-GI. B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of SURF BOARD Height 5 fit, Length 5 fit, Width 3 fit, use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of TRIPLE TWISTER `Height 5 fit, Length 5 fit, Width 5 fit, use Material GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 114 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of DOUBLE SKY WALKER Height 6 fit, Length 6 fit, Width 2 fit, Use Material-GI.B Pillar Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support pipe 48 OD Handle Pipe 31 OD Color 48 OD Handle Pipe 31 OD Power Coting.

Estimate for providing and fixing of PULL UP BAR Height 7 fit, Length 4 fit, Width 1 fit, use Material- GIB Class Pipe, Pipe Thickness 4.5 mm Main Pillar Pipe 88 OD support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting

Estimate for providing and fixing of LEG RISER Height 4 fit, Length 5 fit, Width 2 fit, use Material GI.B Class Pipe, Pipe Thickness 4.5 mm-support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Estimate for providing and fixing of SHOULDER WHEEL Height 5 fit, Length 3.5 fit, Width 2.5 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of CYCLE CYCLE Height 5 fit, Length 4 fit, Width 1.5 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of MULTI FUCTION `Height 8 fit, Length 4.5 fit, Width 3.0 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of `Height 7 fit, Length 6 fit, Width 2.5 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of HORSE RIDER `Height 4 fit, Length 5 fit, Width 2.5 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of ROWER `Height 5 fit, Length 5 fit, Width 3 fit, Use Material- GI.B Class Pipe, Pipe Thinness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of DOUBLE SHOULDER PRESS `Height 7 fit, Length 6 fit, Width 3 fit, Use Material- GI.B Class Pipe, Pipe Thickness 4.5 mm Main Pillar pipe 114 OD Support Pipe 48 OD Handle Pipe 31 OD Color Powder Coting.

Analysis for providing and fixing of CROSS FIT MONKEY BAR CROSS FIT MONKEY BAR 2*24 foot

Analysis for providing and fixing of `MULTIPLAY STATION Height 14 fit, Length 22 fit, Width 18 fit, Use Material -12 gauge Apollo pipe, Main Pillar Pipe 75 OD Handling pipe 25 OD, Stair pipe 48 mm, Fiber thickness 8 to 10mm. With multi color powder coting.

Analysis for providing and fixing of `MULTlPLAY STATION Height 15 fit, Length 18 fit, Width 17 fit, Use Material -12 gauge Apollo pipe, Main Pillar Pipe 75 OD Handling pipe 25 OD, Stair pipe 48 mm, Plastic (LLDP) thickness 8 to 10mm. With multi color powder coting.

Analysis for providing and fixing of `MULTlPLAY STATION Height 16 fit, Length 25 fit, Width 18 fit, Use Material -12 gauge Apollo pipe, Main Pillar Pipe 75 OD pillar pipe 60 OD, With multi color powder coting.

Analysis for providing and fixing of MERRY GO ROUND Height 3 fit, Length 4 fit, Width 4 fit, Use Material -12 gauge Apollo pipe, Pillar pipe 75 OD, Handling pipe 25 OD, With multi color powder coting.

Analysis for providing and fixing of MONKEY BAR Height 8 fit, Length 10 fit, Width 2 fit, Use Material -12 gauge Apollo pipe, Pillar pipe 48 OD, Handling pipe 25 OD, With multi color powder coting.

Analysis for providing and fixing of HORSE RIDER Height 2.5 fit, Length 3 fit, Width 1.5 fit, LLDP plastic.

Analysis for providing and fixing of A B CLIMBER Height 8 fit, Length 12 fit, Width 4 fit, Use Material -12 gauge Apollo pipe, Pillar pipe 48 OD, Handling pipe 25 OD, With multi color powder coting.

Analysis for providing and fixing of `ROCKER SEE SAW Height 3 fit, Length 5 fit, Width 4 fit, Use Material -12 gauge Apollo pipe, Pillar pipe 48 OD, Handling pipe 25 OD, With multi color powder coting.

Analysis for providing and fixing of DOUBLE SWING JHULA Height 7 fit, Length 10 fit, Width 4 fit, Use Material -12 gauge Apollo pipe, Pillar pipe 48 OD, With multi color powder coting.

Analysis for providing and fixing of TUNNEL SLIDE Height 6 fit, Length 6 fit, Width 10 fit, Use Material -12 gauge Apollo pipe, Main Pillar pipe 75 OD, Handling pipe 25 OD, Stair pipe 48 mm, Plastic LLDP thickness 8 to 10mm. With multy color powder cotting.

Analysis for providing and fixing of SINGLE SLIDE Height 7 fit, Length 14 fit, Width 3 fit, Use Material -12 gauge Apollo pipe, Handling pipe 25 OD, Stair pipe 48 mm, Plastic LLDP thickness 8 to 10mm. With multy color powder cotting.

Analysis for providing and fixing of DOUBLE SEE SAW Height 3 fit, Length 6 fit, Width 4 fit, Use Material -12 gauge Apollo pipe, Handling pipe 25 OD, Stair pipe 48 mm, With multi color powder coting.

Supply, installation testing and commissioning of borewell submersible pumping set suitable to operate on 415 volts 3 phase 50 HZ A.C. power supply including water proof joint free cable, motor control panel, 200 mm outer dia uPVC Pipe as per IS : 12818 with fittings, clamps etc. complete in all respect as per details given below :

Supply, installation, testing and commissioning of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base and head with mechanical seal, connected to a TEFC induction motor suitable for 415 plus /- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, including suction and delivery headers of G.I `C` class pipe of required dia, isolation valves, NRV of PN-16 grade, required valve and strainer and vibration eliminators on both suction and delivery side of pumps, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete. Vendor to submit performance curves and technical catalogue of the proposed model for review and information.

Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mounted 4 ft. LED

Supply, Installation, Testing and Commissioning of 9W (Nominal) Wall Bracket Light

Supply, Installation, Testing and Commissioning of 5W Mirror Light.

Bidder Name

Amount

M/s Bhagirathi Infrastructure (GSTN-NA) BID ID -1354113

M/s Sami Greenmax Landscape Pvt. Ltd. (GSTN-06AAPCS4484A1Z9) BID ID -1353743

IND SANITATION SOLUTIONS PVT. LTD. (GSTN-NA) BID ID -1353984

ANTIL ENTERPRISES (GSTN-NA) BID ID -1353861

S.K.TRADING CO. (GSTN-NA) BID ID -1353844

M/s Sami Greenmax Landscape Pvt. Ltd. (BID ID -1353743)

IND SANITATION SOLUTIONS PVT. LTD. (BID ID -1353984)

ANTIL ENTERPRISES (BID ID -1353861)

S.K.TRADING CO. (BID ID -1353844)

M/s Bhagirathi Infrastructure (BID ID -1354113)

S.K.TRADING CO. (BID ID -1353844)

M/s Sami Greenmax Landscape Pvt. Ltd. (BID ID -1353743)

IND SANITATION SOLUTIONS PVT. LTD. (BID ID -1353984)