Supply, Erection,Testing and commissioning of 9 mtr street Light poles along with illuminaries from gate-2 to RSMY railway track via ODY turning and other internal roads inside YTPS

Supply, Erection,Testing and commissioning of 9 mtr street Light poles along with illuminaries from gate-2 to RSMY railway track via ODY turning and other internal roads inside YTPS

Fabricating, supplying and erecting Swaged tubular Pole of height 9m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved qualit...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1500 mm Standa...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1000 mm Standa...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supply of OUTDOOR type Pole control box with 1 nos 6-16A SP MCB, 63A 4 way connectors made out of 16g thick CRCA steel sheet duly finished with seven tank process of siemens grey power coated panel of...

Earth work excavation for laying of UG cable below footpath in the following strata of soil by mechanical/manual means including removing and re-fixing the kerb and pavement stone slabs, removing and ...

Back filling the cable trench with selected available ridded earth from the trench excavation & consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achievi...

Supply and laying of bricks in the existing trench as per the directions of site engineer.

Supplying and filling sieved/riddled sand of approved quality in cable trenches including all lead, lift, watering, ramming, etc., complete.

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT cable. 120 to 240 Sqmm.

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT cable. 2.5 to 25 Sqmm.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).19/20mm.

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).32 mm.

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only).63 mm dia.

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 40mm.

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 100mm.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm Long Barrel.

Fabricationa and supplying of OUTDOOR LT double door distribution panel, 3 phase, 415V, 400A MCCB as incomer,with 1 no 250A, 1 no 100A, 3 Nos 63A and 2 no 32A MCCBs as out going MLDB panels made of ...

Fabrication , Supplying and fixing of OUTDOOR timer panel board in 16 gauge CRCA steel duly finished with the seven tank process of siemens grey power coated and fitted with 63A 4 pole MCB, auto manua...

Fabricationa and supplying of LT distribution panel OUTDOOR type, 3 phase, 415V, 125A MCCB with ROHM and spreader as incomer,with 3 Nos 63A, 4P MCCBs as out going in MLDB panels of size 1825Hx1000Wx4...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Removing stumps, roots of trees including excavation if necessary upto 30cm depth, removing and stacking the material neatly and levelling the surface., complete with intial lead upto 50m and all lif...

Transporation of 250kva transformer from stores to YTPS gate -2 premises and Erection at site including all lead and lifts as directed by site engineer.

Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection of...

DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS (Dwg No. BESCOM/GM/QS&S/35 & 63 Dtd 24.11.2018).

Erection of DP structure excluding cost of erection of RCC poles. Including fixing of braces insulators etc., as per the approved drawings and specifications (excluding the cost of excavation, backfil...

RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785.

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil.

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth.

RCC Pole - 8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785.

Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil.

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth.

11 kV, 400 Amps Double Break GOS (Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018).

Fixing of GOS including wiring (11 kV Double Break 400 Amps).

DOLO Cutout as per IS-9385, Part-1 to 3 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification.

Labour charges for fixing DOLO Cutouts.

9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) 3 Nos(Set)

Fixing of 3 Nos Lightning Arrestor including wiring.

HG Fuse Unit as per IS-5350 Part-2 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018). Set (3 Nos)

Fixing Horn Gap Fuse including fixing of cross arm and wiring,

Guy Set Complete with No. 15 Strain Insulator & Concreting material

Guy concreting with Boulders, Mud and Sand.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Excavation, filling of granite/trap broken metal and rubble with sand/mud on top of rubble and providing CC of M20 grade for transformer center size=8mtr x 6 mtr and pavement of 1 mtr all along the tr...

Providing and making G.I Barbed Wire Fencing 1.8 m High, Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 2m center to center founde...