REPAIR TO CERTAIN ROAD AND ALLIED SERVICES INCLUDING ROAD FURNITURE AT RAIWALA MIL STN UNDER AGE (I) RAIWALA

Amount

M&L preparing existing black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top/concrete surfaces than applying evenly priming tack coat with paving Bitumen VG-30 grade over the prepared surface by mechanical sprayer @ 5 kg/10 Sqm of surface area complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, N exc 50 mm deep complete all as specified and directed.

M&L for preparing WBM/ WMM surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, and applying evenly priming tack coat with paving Bitumen VG-30 grade over the prepared surface by mechanical sprayer @ 10 kg/10 Sqm of surface area complete all as specified and directed.

M&L premix bituminous macadam laid, rolled and compacted to required gradient and camber consolidated thickness not exceeding 75 mm with 4% binder of paving Bitumen VG-30 grade, content by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power road roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 55,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion materials etc and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as in centre line and edge line, zebra crossing , stop lines etc.road marking of 150/100 mm width using HOT MARK thermoplastic paint (Hot application) white or yellow by indigenous morden propelled road marking machine as directed including all ingredients such as binder,glass beads,titanium dioxide,calcium carbonate,inter fillers etc,thermoplastic requirement for glass beads shall be conforming to BS-6086 of MORTH specification including spraying of glass beads @ 300Grm/Sqm etc complete all as specified and directed.

Taking down solar cat eye/cat eye , solar reflective in any position fixed in road complete all as specified and directed.

Taking down Speed breaker in any position fixed in road complete all as specified and directed.

S&F dual directional 30 degree angle high intensity reflective Cat Eye double moulded of impact resistance ABS plastic stud 100mm x 100mm x 20-22mm with a shank of 50 mm with two reflector made out of PMMA, plane base having ultra-violet resistant colour (white/red/yellow) having micro cube corner spark glow PC reflectoe white/ red/ yellow for fixing with epoxy or bitumen adhesive or fixed as per manufactures instructions all as complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S&F speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material welded with ABS plate through ultrasonic welding process and then fixed to on to the speed breaker of size 750x75x250mm including surface to be make level as parental surfaces complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new surface of brick or concrete or plastered surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old surface of brick or concrete or plastered surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M/s Himanshu Tyagi (BID ID -3473894)

Malik Associates (BID ID -3468150)

Sunil Enterprises (BID ID -3468252)