GARDEN OF WEST ZONE LOCATED IN TANDALJA T.P 22,F.P-85 PLOT RESERVED FOR GARDEN (ABOVE/BELOW)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Founda on and Plinth(R&B SOR 2024-2025 IT NO

Providing and laying controlled cement

concrete M 150 for COPPING AND curing

complete excluding cost of formwork and

reinforcement for reinforced concrete Cumt

work in (A) Founda ons, foo ngs, Base of

columns and Mass concrete (R&BSOR

Providing and laying controlled cement concrete

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced Cumt

concrete work in (R&B SOR 2024-2025 ITNO

. Providing TMT Bar FE 500D reinforcement for 76.52

R.C.C. work including bending, binding and placing kg

in posi on complete upto floor two level (R&B

Brickwork using common burnt clay building bricks

having crushing strength not less than 35 4172.37

kg./Sq.Cm. in founda on and plinth in Cement cumt

Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conven onal(R&B SOR2024-2025 IT NO 06002BA)

P & L Brick work using common burnt clay 4458.23

building brick having crushing strength not

less than 35 kg/sq. cm. up to floor two level in

cement mortar 1:6 (1 Cement : 6 fine sand) (B)

Conven onal (R&B SOR2024-2025 IT

) Half brick masonry in common brunt clay

building bricks having crushing strength not 623.56

less than 35 kg/Sq.Cm. in cement mortar 1:4 Sqmt

(1--cement : 4-coarse sand) up floor two level

(B) Conven onal (R&B SOR 2024-2025 IT NO

Providing formwork of ordinary mber

planking so as to give a rough finish including

centering shu ering stru ng and propping

etc. Height of propping and centering below 390.60 264.60

suppor ng floor to ceiling not exceeding 4M. Sqmt

and removal of the same for in situ reinforced

concrete and plain concrete work in. (A)

Founda ons Foo ngs Bases of Columns etc.

and Mass concret. (R&B SOR2024-2025 IT NO

20mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consis ng of 12mm thick backing coat of 178.61

C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete.(R&B SOR 2024-2025 ITNO

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half 163.39

brick walls for interior plastering upto floor Sqmt

two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)(R&B

SOR2024-2025 IT NO 17002B)

Distempeing (Two coats) with oil bound

distemper of approved brand and

manufacture and of required shade on

wall surfaces to give an even shade, over

and including a priming coat with

distemper primer of approved brand and

manufacture a er thoroughly brushing the

surface free from mortar dropping and

other foreign ma er and also including

preparing the surface even and sand

papered smooth.(R&B SOR2024-2025 IT

Finishing wall with water proofing cement

paint of on wall surfaces (Two coats) to

give an approved brand and manufacture 59.71

and of required shape even shade a er sqmt

thoroughly brushing the surface to remove

all dirt and remains of loose powered

materials.(R&B SOR2024-2025 IT NO18027

providing and fixing M.S. grills of required

pa ern to wooden frames of windows etc.

with M.S. flats at required spacings and frame 150.82

alround, square or round bars with round

headed bolts and nuts or by screws. (A)

ornamental Grill.(R&B SOR 2024-2025 ITNO

Providing and Laying of 75mm thick (m25)

grade of vibroshot blasted grass paver block(

hollow paver block) as per design given by

engineer incharge with 25mm thick sand bed 1017.00

layer watering compac ng paving with Sqmt

compact bt mechenical compacter etc.

complete as per specifica on ( A.R) material

should be confirmed IS 15658-2006

manufactured must have ISI ( As Per approved

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 laid over and jointed with grey cement Sqmt

slurry including rubbing and polishing etc.

complete. (B) 30 mm thick(R&B SOR 2024-2025 IT

Pain ng two coats (excluding priming coat) on

new steel and other metal surface with

enamel paint, brushing, interior to give an Sqmt 91.29

even shade including cleaning the surface an

even shade including cleanicn the surface of

all dirt, dust and other foreign ma er.( R&B

SOR2024-2025 IT NO NO19002)

Providing & laying compacted machine

crushed black stone aggregate 250mm

thick wet mix macadam in two layers in the

material with water to OMC in mecanically

mix (pug mill) carriage of mix material by

tipper to site laying,spreading and 160.00

compacting in sub base of compacting

power vibrater roller to achive the desired

density (mechanically laid with tractor

dozer) etc. complete as per technical

specification MORTH clause-406(Approved

Structural steel work ( Confirming to IS

4923-1997) riveted, bolted or welded in

builtup for all type sec ons, in framed kg

work, including cu ng, hois ng, fixing in

posi on and applying a priming coat of

approved steel primer all complete as per

the structural designs and direc ons of

Engineer in site(R&B SOR 2024-2025

23 Providing and fixing precast concrete curb

stone of grey cement based concrete block

30 cm length, 30 cm height and 15 cm

thick of M250 grade concrete as per

approved designed and including RMT

excava on for fixing in proper line and

levelled, filling the joint with C.M. 1:3 (1

cement:3 fine sand etc. complete (

24 Providing and laying cement concrete

flooring 1:2:4 (1-cement

: 2-coarse sand : 4-graded stone aggregate

20mm nominal size) SQMT 45.00 312.56

laid in one layer and finished with a

floa ng coat of neat

cement. (A) 40mm thick.(R&B SOR 2024-

2025 ITNO. 14015AA)

25 PROVIDING CORRUGATED F.R.P. SHEETS

WITH GALVANISED IRON J OR L

HOOKS,BOLTS AND NUTS 8MM DIAMETER

WITH BITUMEN AND G.I. LIMPET 50.00 1,798.00

WASHER,FILLED WITH WHITE LEAD

COMPLETE EXCLUDING THE COST OF

PURLINS,RAFTERS AND TRUSSES.(R.A.)

26 Providing and fixing window having

extruded aluminum Colour anodized

sec on frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , SQMT

horizontal Three track member size 92mm

ver cal member of size 92mm x 31.75mm

x 1.50mm @ Wt. 1.06 Kg/mt with sliding

shu ers of horizontal member size

mmx18mm x1.29mm @ wt.of

Kg/mt, ver cal member of size 40mm x

with 5 mm thick transparent bronze colour

nted float glass with powder coated

aluminum fi ngs and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc.(R&B SOR 2024-

27 Provoding and fixing flush door shu ers,

solid core construc on with frame of first

class hardwood with cross board and face

veneer or plywood face panels, including

anodised alluminium bu hinges with SQMT 7.56

necessary screws. (B) Non-decora ve type

and block board core anodised alluminium

bu hinges in flush door shu ers (2)

mm thick.(R&B SOR 2024-2025 IT NO

28 Providing wood work in frames of Doors,

windows cleare story windows and

othersimilar works wrought, framede and CUDM 3.24

fixed in posi on. (A) Indian Teak Wood

(R&B SOR 2024-2025 IT NO 10001A)

29 Providing and laying Ceramic les 6mm

thick in Skir ng risers of step and dedo on

10 mm thich cement plaster 1:3 (1- cement SQMT 99.00 1,116.32

: 3-coarse sand ) finishing with flush

poin ng in white cement.

(R&B SOR 2024-2025 IT NO 14009AA)

30 Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube 100.00 300.99

fi ng and clamps including making good

the wall ceiling and floor.(C) 20mm

(R&B SOR 2024-2025 IT NO 23001BA)

31 Providing and fixing water closet squa ng

Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and

trap to be measured and paid for NOS 4.00

separately) (A) Vitreous China.(I) Long

pa ern = White colour

32 Providing and fixing wsh down water

closet (European type, W.C. Pan) with

integral P or S trap including join ng the

trap with soil pipe in Cement Mortar 1:1 NOS 2.00 1,343.38

(1-Cement : 1-fine sand) (Seal and cover to

be measured and paid for separately)(A)

vitreous China Pa ern :(i) in white colour

33 Providing and fixing 100mm size P or S trap

for water closet squa ng pan including

join ng the trap with the pan and soil pipe NOS 6.00 327.44

in cement Mortar 1:1 (1-Cement : 1-

Finesand)(A) Vitreous China.

34 Providing and fixing washbasin with single

hole for pillar tap with C.I. or M.S. brackets

painted white including su ng holes and

making good the same but excluding NOS 2.00

fi ngs.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In

white colour.(R&B SOR 2024-2025 IT NO

35 Providing and fixing C.P. brass waste for

washbasin or sink. (A) 32mmdia.704(R&B 2.00 67.24

36 Providing and fixing 600mm x 450mm NOS 2.00 850.90

bevelled edge mirrror of superior glass

mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge

with C.P. brass screws and

washers.710(R&B SOR 2024-2025 IT NO

37 Providing and fixing screw down bib taps

of following size.(A) Brass screw down bib NOS 10.00

tappolished bright. (i) 15mm dia.714(R&B

38 Providing and fixing pillar tap, capstan

head, screw down high pressure with

screws, shanks and back nuts. (i) 15mm 2.00 305.67

dia. 720(R&B SOR 2024-2025 IT NO

39 Providing and fixing Gun metal check or

non- return fullway wheel valve.(C) 25mm NOS 6.00

dia.721(R&B SOR 2024-2025 IT NO

40 Providing and fixing chromium plated

brass half trun flush cock

of approved quality including fixing in pipe

line etc. NOS 10.00

41 Providing and fixing Urinal or approved

quality including conec ng the Urinal with

waste pipe , tap etc. complete.(A) White 2.00

earthenware flat back or corner type

size430mm x 260mm x 350mm.733(R&B

42 Providing and fixing ball cock of

approved.quality as directed.(A) Copper NOS 2.00

Metal (i) 25mm dia.739(R&B SOR 2024-

43 Providing laying (to level or slopes) and

join ng reinforced concrete Light duty

non- pressure pipes I.S. class NP2 of the

following internal diameter with collars RMT 250.00

and bu ends prepared for collar joints

including tes ng of joints complete.(D)

300mm774(R&B SOR 2024-2025 IT NO

44 Construc ng brick masonry road gully

chamber 1100mm x

775mm including 500mm x 450mm (C.I.

horizontal gra ng with NOS 15.00

frame and ver cal gra ng complete.)

45 HDPE storage tank Supplying Rota onally

moulded HDPE storage Tank With ISI mark

of approved mark incl. all taxe and

trasportaion ( GWSSB SOR 13-14 ) Page no 3.00 4,146.00

52 Item NO 36(a)Storage Tank with ISI

Mark ( with outside Black colour and

inside lining) 3 NOS

46 Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having Na onal Sanita on

Founda on (NSF) seal for potable water of RMT 100.00

following dia. nominal bore tube fi ngs

and clamps including making good the

wall, ceiling and floor etc. complete. [B]

mm.(R&B SOR 2024-2025 IT NO 23056)

47 Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having Na onal Sanita on RMT 100.00

Founda on (NSF) seal for potable water of

following dia. nominal bore tube fi ngs

and clamps including making good the

wall, ceiling and floor etc. complete. [C]

mm.(R&B SOR 2024-2025 IT NO 23057)

48 PROVIDING AND FIXING 8 GAUGE THICK

CHAIN LINK WITH THE GAPPING OF 2"X2"

FIXING WITH NECESSARY FIXURES IN LINE

AND LEVEL INCLUDING THE COST OF 324.00

TRASPORTATION AND OTHER TAXES AS

PER INSTURCTION OF ENGINEER

INCHARGE (APPROVED R.A.)

49 PROVIDING AND FIXING COLOURED ACP

FACIA ALUMINIUM SECTION FRAME OF

X 35MM TUBE FRAME AT REQUIRED

SPACING FIXED ON PLASTERED WALL OR

RCC SURFACE OR FREESTANDING

STRUCTURE INCLUDING 3MM ALUBOND

OR EQUIVALENT MAKE ALUMINIUM

COMPOSITE PANELS (ACP)OF APPROVED 15.00 3,020.00

COOUR FIXED ON THE FRAME IN TRUE

LINE AND LEVEL UPTO ANY HEIGHT FOR

ANY DECORATIVE SURFACE AS PER

ARCHITECTS DRAWINGS AND

INSTRUCTIONS AND AS PER

INSTRUCTIONS OF ENGINEER IN CHARGE

50 Providing and fixing pre-cast Rubber

Dye/Steel Dye inter locking concrete block

60mm thick with grade of concrete M300

pnuma c compressed/ vibrated

mechanically and as per approved design

confiming to IS 15658:2006 imcluding 150.00

35mm sand layer for lavelling filling the

joint with sand in proper line and level as

per guildlines of IRC : SP 63-2018

etc.Vomplete.( R & B SOR 2024-2025 Item

I/We am/are willing to carry out the work at… ...................... % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount

of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct ………% below Add ………% Above

In words In words