Diff AMC Building like ward office, muster station, school, building, aganvadi, amc various building, public toilet block & urinal block repairing and Renovation work in bopal ghuma in south west zone.(A.R.C)Re-invite

*Special condition of contract for Item_(Providing and laying of interlocking grey paver blocks

unishape of high density 60 mm thick...)mentioned in Technical volume.

● Successful bidder of this tender shall have to purchase 50% of total quantity of paver block from

Amdavad Enviro Projects Pvt. Ltd. The paver blocks shall be as per tender BOQ & tender specifications.

Payment of such 50% Quantity shall be made to Amdabad Enviro Projects Pvt.Ltd. directly by the

successful bidder on mutual agreement of rate between successful bidder & Amdabad Enviro Projects

Pvt. Ltd. AMC shall not be responsible for any kind of dispute between Amdabad Enviro Projects Pvt. Ltd.

& successful bidder or this tender. The successful bidder will be paid by AMC as per tender BOQ item

rate + premium.

● The quality, size, shape, compressive strength & other technical parameter of paver Block shall be as

per IS standards & tender specification and shall be completely successful bidder's responsibility.

● If in case of failure of paver Block or if Paver Block are not as per the standards, the same shall be

rejected. Successful bidder shall remove such failed paver blocks immediately form site and fix new paver

blocks as per standards.

● The successful bidder shall produce a certificate /bill from Amdabad Enviro Projects Pvt. Ltd. showing

quantity of Paver Block which should be minimum 50% of total quantity.

1. All the relevant causes mentioned in the Tender which are related to above clauses shall be read as

mentioned in above AMENDMENT.

2. The above Amendment shall be Part of Tender document & shall be bound to Contractor and shall be

submitted along with other tender documents with duly signed and stamped.

Seal and signature of the bidder Additional City Engineer

Date :- AHMEDABAD MUNICIPAL CORPORTION

Tender Fee :Rs 900.00 Date of submission :02.03.2026 Time: :18:00 Hrs

Earnest Money : .Rs.9998.00 Date of Opening :03.03.2025 Time: 17:00 Hrs

Contractor’s Name &Address :

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTEMENT- SOUTH WEST ZONE

Name of Work:-Diff AMC Building like ward office, muster station, school, building, aganvadi,

amc various building, public toilet block & urinal block repairing and Renovation work in

bopal ghuma in south west zone.(A.R.C) Re invite

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth

including sorting out and stacking of

useful materials and disposing of

1 theexcavated stuff upto 50 Meter

lead.(A) Loose or soft soil (R & B S.O.R

2023-24 I.no. Item Code 04001A)

5 Upto 1.5 mt Depth 115.92 Cmt

5 1.5 to 3.0 mt.depth 158.4 Cmt

Filling available excavated earth

(excluding rock) in trenches, plinth, sides of

2 foundations etc. in layers not exceeding

20 cm. in depth consolidation each

deposited layer by ramming and watering.

Providing and laying cement

concrete1:5:10 (1-Cement: 5-

coarses sand and:10-hand broken stone

3 aggregates 40mm nominal size) and

curing complete excluding cost of

formworkin (A) Foundation and Plinth.

Providing and laying cement

concrete1:4:8 (1-Cement: 4- coarses

and:8-hand broken stone aggregates

4 40mm nominal size) and curing

complete excluding cost of formworkin

(A) Foundation and Plinth

Providing and laying cement concrete 1:3:6

(1-Cement : 3- coarse sand : 6- hand

5 broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Providing and laying cement

concrete 1:3:6 (1-Cement:3-coarse sand:6-

crushed stone aggregates 20mm

nominal size) and curing complete

including cost of formwork in (A) wall

2 caps/coping 4006.15 Cmt

Providing and laying cement

concrete work 1:2:4 ((1-Cement:2- coarse

sand:4-graded aggregates 20mm

nominal size) curing complete

excluding cost of formwork and

Foundations, footings, base or

a columns and mass concrete

Slabs, landing, shelves, balconies, lintels,

b beams, girders and cantilivers upto

2 floor two level 4012.47 Cmt

Independent piers, columns, and pillars,

c upto floor two level

Provdg. & laying cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone

aggregates 20 mm nominal size) for

reinforced concrete chhajjas not

exceeding 10 cm. thickness upto floors

8 1 two level including finishing the 6487.07

exposed surfaces with cement mortar

1:3 (1 cement : 3 find sand) to give a

smooth and even surface centering and

form work and curing complete

excluding cost of reinforcement.

Providing and laying controlled cement

concrete / Ready Mix Concrete of M-

200 and curing complete, excluding

the cost of form work and

reinforcement for reinforced concrete work

Foundations, footings, base of

(A) columns, and mass concrete.

Walls from top of foundations /level up to

(B) floor Two level.

Slabs,landing,shelves,Balconies Lintels,

(C) Beams, Girders and Cantilever upto floor

Columns, pillars, posts, and struts, up to

(D) floor two level.

Staircase up to floor two level.

(E) (excluding landing)

Vertical and horizontal fins up to floor

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2-coarsesand:

4-graded stone aggregates 20 mm

nominal size) and finishing smooth with

10 curing etc. complete including the cost of

form work but excluding the cost of

reinforsement for R.C.C work in (iv)

Slabs having more than 13 cm and upto

1 cm.thickness 6241.78 Cum

Providing and Laying ordinary cement

concrete 1:2:4 (1-Cement 2-coarsesand:

4-graded stone aggregates 20 mm

nominal size) and finishing smooth with

11a curing etc. complete including the cost of

form work but excluding the cost of

reinforsement for R.C.C work in (iv)

Slabs having more than 8 cm and upto

1 cm.thickness 7401.59 Cum

Brick work using common burnt clay

building bricks having crushing

strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement

Mortar1:6 (1-Cement :6 - fine

1 (A) Conventional (upto 10 ton) 3981.21 Cmt

1 B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above

13 Item for super structure above plinth

0 level upto floor two level (B) Conventional

a 2 (A) Conventional 272.25 Cmt

b 2 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) Per

(A) Modular Floor

D) above floor two level Item No. 2(6.13) Per

(B) Conventional Floor

Half brick masonry in common brunt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 ( 1-Cement : 5 coarse

sand ) in foundation and

2 Plinth conventional brickwork 583.49 Smt

Extra for half brick masonry in super

15 structure above plinth level upto floor

2 two level (B) conventional 433.4 Smt

Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting

and propping etc. height of propping

16 and centering below supporting floor to

celling not exceeding 4 M & removal

of the same for in situ reinforced or

plain concrete work upto floor four level

Foundation, footings, bases of

a columns etc. and mass concrete.

(B) Flat surfaces such as soffits of

supspened floors slabs Landings and the

like. (1) Floors etc. upto 200 mm in

5 thickness. 252 Smt

(B) Flat surfaces such as soffits of

suspended floor roof slabs Landings and

the like. (2) Floors etc. above 200mm in

5 thickness. 270.9 Smt

Vertical surface such as walls (any

thickness) partitions and the like including

attached buttresses & string course & the

5 like. 229.95 Smt

(ii) Sides And Soffits Of Beam,

Haunchings Cantilevers, Girders,

e Bressumers And Lintels Not

5 Exceeding 1 M In Depth. 192.15 Smt

(G) Columns PillarsPosts and struts. (1)

f Square Rectangular Polygonal in plan.

g 5 (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam

Haunchings canti-levers Girders

Bressumers and Lintels exceeding 1M.in

2 Depth. 259.88 Smt

Providing and fixing 35 mm thick

panelled, glazed or panelled and glazed

shutters for Doors windows and clear story

17 windows including anodised alluminium

But hinges with necessary screws and

indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick

shutters for cup boards etc.

18 including black enamelled M.S. butt

hinges with necessary screws.(A) Indian

teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters

for cupboards etc. including anodised

a alluminiu butt hinges with necessary

screws. (A) Indian teak wood. (ii) Fully

2 Glazed. 3006.75 Smt

Providing and fixing 25 mm thick shutters

for cupboards etc. including anodised

b alluminiu butt hinges with necessary

screws. (A) Indian teak wood. (ii) Partly

1 panelled and partl glazed. 2814.42 Smt

Providing and fixing M.S. grills of

required pattern to wooden frames of

windows etc. with M.S. flats at required

19 spacings and frame alround, square or

round bars with round headed bolts and

nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered

glass windows and ventilators with

20 teak wood frame 10 cm. x 7 cm. size

including 3 coats of oil painting to wood

work etc.complete.

Providing and fixing glazed louvered

glass windows and ventilators with

teak wood frame 10 cm.x7 cm. size

21 including 3 coats of oil painting to wood

work etc.complete.with wooden louvers

plank 12mm thick

Providing and fixing 35 mm thick

shutters for Doors, windows and clere

story windows including Indian teak

wood frames 10 cm x 7 cm. size

22 including anodized alluminium fixtures

and fastenings including primer coat of

approved quality and two coats of oil

painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick

shutters for Doors, windows and clere

story windows including Indian teak

wood frames 10 cm x 7 cm. size including

23 black enamelled iron oxidixed

fixtures and fastenings including primer

coat of approved quality and two coats of

oil painting etc, complete.(ii) Fully

2 Panelled. 5285.45 Smt

Providing and fixing 35 mm thick shutters

for Doors, windows and clerestory windows

including Indian teak wood frames 10 cm x

7 cm. size including anodized alluminium

a fixtures and fastenings including primer coat

of approved quality and two coats of oil

painting etc, complete. (iii) Partly panelled

and partly glazed.

Providing and fixing 30 mm thick

FACTORY MADE SOLID PANEL PVC

DOOR SHUTTER consisting of frame

made out of M.S.tubes of 19 gauge

thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and

bottom rails.M.S. frames hall have a coat

of steel primers of approved make and

manufacture, M.S. frames hall be covered

with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm formings

tiles, and 5 mm thick 75 mm wide PVC

sheets for to prail, lock rail and bottom rail

24 on either side, and 10 mm (5 mm x 2) thick,

20 mm wide cross PVC sheet as gap

insert for top rail and bottom rail, Panelling

of 5 stiles and rails with 30 mm wide x

mm thick PVC sheet beading on

eighter side, and joined together with

solventcement adhesive,. An additional

mm thick PVC strip of 20 mm width is to be

stculkon the interiors side of the ‘c’

channel using PVC solvent

cement adhesive etc. complete as per

direction of Engineer incharge,

manufacture’s specification and

1 drawing. 1135.02 Smt

Providing and fixing in position

collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat

iron diagonal 20 x 5 mm size with top

25 and bottom rails T iron 40 x 40 x 6 mm with

38 mm dia steel pulleys complete with bolts,

nuts, locking arrangements, stoppers,

handles, including a priming coat of

red lead paint & approved make.

Providing and fixing 1 mm thick M.S.

sheet sliding shutters with frame and

diagonal braces of 40x40x6 mm angle

iron, 3.15 mm M.S.gusset plates at

Junctions and corners 25 mm dia.

pulley, 40x40x6 mm angle and T-iron

guide rail at top and bottom

respactively with handles, stoppers and

locking agangement etc, including

2 applying a priming coat of red lead paint. 3652.12 Sqm

Providing & Fixing in position Alluminium

doors with frame using approved

quality anodised extruded alluminium

section as approved by Engg.in

charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter

bottom vertical & top section 83.5x44.45

27 Shutter bottom section at 114.3x44.45

mm at (1.37kg/mt) Shutter middle section

at 100x44.3 wt.(1.37 kg/mt) incl.providing

& installing 5 mm thick approved

color Acrylic sheet of standard quality

fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction

1 of engg.in charge.(N.S.) 2,900.00 Smt

Providing and fixing extruded aluminum

window having extruded aluminum Colour r

Powder Coated section frame main outer

size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical

member of size 122.20mm x 31.75mm x

1.50mm ,@ Wt. 1.398 Kg/mt with sliding

28 shutters of horizontal member size 40mm x

0.456Kg/mt,vertical member of size 40mm x

with 5 mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for Sq.

2 window. 2119.14 M.

Providing & Fixing in position

Alluminium vents with frame using

approved anodised extruded

alluminium section as approved by Engg.

In charge.(Jindal alluminium) units

equivalent Approved Rate)Frame section

0.68Kg/Rmt) incl. Providing & Installing

mmthick approved color Acrylic sheet of Sq.

1 standard quality etc. comp. 1,950.00 M.

Providing and fixing standared

extruded of alluminium section of size

63 mmx38.10 mmx1.2 mm (Jindal

Section:2434, or equivalent @ Wt.0.643

Kg/mt) with colour anodized

alluminium frame for ventilation with

mm thick frosted glass as details etc Sq.

2 complete for Ventilation 1163.92 M.

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094Kg / Rmt with colour

31 Powder Coated alluminium frame with

mm thick transparent bronze colour tinted

float glass as details etc complete for Fix

1 Partition 2,141.88 Sq.M.

Providing and laying 40 mm thick marble

chips flooring rubbed and polished

(I.E.terrazo) to granolithic finish with under

layer 30 mm thick cement concrete1:2:4

(1-Cement: 2-coarse sand: 4-graded

stone aggregate 10 mm and down

gauge) and to player 10 mm thick with

white, black or white and blak marble cihps

32 of required sizes from 1 mm to 4 mm

nominal size laid in cement marble powder

mix 3:1 (3- Cement:1-Marble powder

by weight) in proportion of 4:7 (4-

Cement: 7-marble chips by volume)

(C) Medium Shade pigment with

approx 50% white cement and 50%

ordinary cement (In top layer only) (upto

2 ton) 811.13 Sqm

Providing and laying marble chips skirting

(Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white,

black or white and black marble chips

of size from smallest to 4 mm nominal

33 size laid in cement marble powder mix 3:1

(3-Cement: 1 marble powder by weight)

in proportion of 4:7 (4-cement marble

powder mix: 7-marble chips by volume) (B)

Light shade pigment with white cement (In

3 top layer only) 869.4 Sqm

Providing and laying white glazed tiles 6mm

thick in flooring treads of steps and landing

34 laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing

3 with flush 908.17 Sq.M.

Providing and laying Ceramic tiles 6 mm

thick in flooring treads of steps and

landing laid on a bed of 12 mm thick

cement mortar 1:3 (1- cement :3-coarses

and) finishing with flush pointing in white

3 cement. 960.47 Sq.M.

Providing & Fixing 20 mm thick Mirror

Polished Decorative Granite Board with

Computerised Golden Letters

36 Discription as per instructions of

engg. in charge to M.S. frame

structure for Inaugaration & Public

Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to

mm thick, 36''x36'' in flooring treads of steps

and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1-cement:3-

coarses and) finishing with flush pointing

1 inwhite cement. 1469.91 Sq.M.

Providing and laying Vitrified tiles 8 to

mm thick, 24''x24'' in skrting risers of steps

and dedo on 10 mm thick cement

plaster 1:3 (1- cement: 3-coarse

sand) and jointed with white cement

3 slurry 1130.15 Sqm

Providing and laying Vitrified tiles 8 to

mm thick, in skrting risers of steps and

39 dedo on 10 mm thick cement plaster

1:3 (1-cement:3- coarse sand) and

jointed with white cement slurry

Providing and laying 24" x 24" vitrified

Tiles 8 to 10 mm th. Double

Charged gloosy/ Matt of Approved make

as approved by Adl.C.E. / consultants

40 in flooring over 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand)on

new surface& jointed with colour cement

slurry incl with flush pointing &

cleaning the surface etc. comp. Sq.

Providing and laying 24" x 24" vitrified

8 to 10 mm th.Double Charged

Gloosy / Matt tiles of Approved make

as Approved by Adl.C.E. / Consultants for

upto 10 cm high skirting as approved by

41 Engineer in charge over 10 mm thick

cement mortar 1:6 (1 cement : 6 coarse

sand)on new surface& jointed with colour

cement slurry incl with flush pointing &

cleaning the surface etc. comp.

Providing and laying polished Kota stone

slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5

42 (1-Lime putty:1.5-coarses and) laid over

and jointed with grey cement slurry mixed

with pigment to match the shade of

slab including rubbing and polishing etc.

1 complete. (A) 25 mm thick 982.83 Sq.M.

Providing and laying marble stone slab

flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse

sand) or L.M. 1:1.5(1- lime putty : 1.5 -

coarse sand) laid and jointed with gray

cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm

2 thick 2194.63 Sq.M.

Providing and laying polished Kota stone

slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-

44 cement:6-coarses and) or L.M.1.1.5 laid

over and jointed with grey cement

slurry including rubbing and polishing

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone

slab 25 mm thick in risers of steps, skirting

Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses

and) and jointed with gray cement

slury mixed with pigment to match the

shade of slab including rubbing and

1 polishing etc.complete. 1176.03 Sq.M.

Providing and laying cement

concrete flooring 1:2:4 (1-cement: 2-

coarses and:4-graded stone aggregate

20mm nominal size) laid in one layer and

finished with a floating coat of neat

2 cement. (A) 40mm thick. 297.68 Sq.M.

Providing and laying cement

concrete flooring 1:2:4 (1-cement: 2-

coarse sand:4-graded stone aggregate

20mm nominal size) laid in one layer and

finished with a floating coat of neat

1 cement. (B) 50mm thick. 348.08 Sq.M.

Providing and laying broken china mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out

upto surface using white cement

including rounding off junctions and

extending them up to15 cm along the

wall, clearing with water and oxalic

1 acid etc.as directed. 739.89 Sqm

Providing and laying coloured glazed

tiles of the size 300 mmx200 mmx8

mm/300 mmx450 mmx8 mm in skirting,

49 risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1cement:

coarse sand) & jointed with white

1 cement slurry. 1426.95 Sqm

Providing ridges or hips 600 mm overall

in plain G.I. sheet class-3 fixed with G.I.

50 J or L Hooks and nuts 8 mm dia G.I.

Limpet and bitumen washer complete. (1)

0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm

over all semi circular plain G.I.sheet class-

3 gutter with Iron brackets 40 mmx3 mm

51 size Bolts, Nuts, washers etc.

including making necessary connection with

rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water

profing treatment with bitumen felt

consisting of second and fourth course

of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per

Sq.M.of area for each course and first

course with fibre base bitunen

saturated under lay type land third course

with fibre base self finished felt type

grade 1 and fifth and final course of stone

grit 6 mm and down size or pea sizes

gravel spread at

Cu.Metre/Sq.metre preparation of

1 surface excluding grading complete. 466.84 Sqm

Providing and fixing on wall face C.I.

Rain water pipe including filling the joints

53 with spun yarn soaked in neat cement

slurry and cement mortar 1:2(1-

Cement : 2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster

in single coat on Rough (Similar) side of

single or half brick walls for interior

54 plastering up to floor two level and

finished even and smooth in (i) Cement

mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement

plaster on walls upto height 10 metres

above ground level consisting of 12mm

55 thick backing coat of C.M. 1:3 (1-cement :

3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface

(two coats) over and including a

primary coat of white washing to give an

56 even shade after through brooming the

surface to remove all dirt, dust,

mortar drops and other foreigh matter.

Removing dry or oil bound

distemper by a washing and

57 scraping and sand papering the wall

surface smooth including necessary

repairs to scratches complete.

Distempering with dry distemper of

approved brand and manufacture (two

coats) and of required shade on wall

surfaces of given an even shade, over

and including a priming coat of

whiting after thoroughly brooming the

surface free from mortar dropping and

5 other foreign matter. 46.94 Sqm

Distempeing (Two coats) with oil bound

distemper of approved brand and

manufacture and of required shade on

wall surfaces to give an even shade,

over and including a priming coat

with distemper primer of approved

brand and manufacture after

thoroughly brushing the surface free

from mortar dropping and other

foreign matter and also including

preparing the surface even and sand

3 papered smooth. 76.08 Sqm

Extra Coat for Above Item over above

60 for every subsequent coat of

5 approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall

61 surface to give an even shade including

throughly brushing the surface free

from mortar droppings and other foreign

matter and sand papered smooth.

Extra over item for every sub sequent

62 coat of wall painting with plastic emulsion

5 paint of approved brand 33.39 Sqm

Extra over item for painting with plastic

62 a emulsion paint of approved brand on

3 ceilings and sloping roofs. 5.36 smt

Extra over item for painting with plastic

63 emulsion paint of approved brand on

5 ceilings and sloping roofs. 34.34 Sqm

Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

64 interior to give an even shade including

cleaning the surface an even shade

including cleaning the surface of all dirt,

3 dust and other foreign matter. 86.94 Sqm

Painting one coats (excluding priming

coat) on previously painted steel and other

metal surface with enamel paint, brushing

65 to give an even shade including cleaning

the surface of all dirt, dust and other

foreign matter.

Extra over item for every sub sequent coat

Painting two coats (excluding priming

coat) on new steel and other metal

surface with synthetic enamel paint,

brushing to give an even shade including

cleaning the surfaceofalldirt,dust and other

5 foreign matter. 64.66 Sqm

Painting one coats (excluding priming

coat) on previously printed steel and other

metal surface with synthetic enamel paint,

68 brushing to give an even shade

including cleaning the surface of all dirt,

dust and other foreign matter.

Extra over Above item for every sub

69 sequent coat of paint.

Painting two coats (excluding priming

coat) on external surface of new rain

water, soil, waste and vent pipes and

fittings with ready mixed bituminous

brushing, black, anti corrosive to give

an even shade including cleaning of all

dirt, dustand other foreign matter.(75 mm

5 dia) 20.16 Sqm

Painting two coats (excluding priming

coat) on external surface of new rain

water, soil, waste and vent pipes and

fittings with ready mixed bituminous

brushing, black, anti corrosive to give

an even shade including cleaning of all

dirt, dust and other foreign matter.(100 mm

25 dia) 25.05 Sqm

Painting two coats (excluding priming

coat) on new wood and wood based

surface with enamel paint, interior to

give an even shade including

cleaning the surface of all dirt, dust

and other foreign matter sand papering

and stopping. (a) Ready mixed paint

25 brushing wood primier pink. 26.78 Sqm

Painting one coats (excluding priming

coat) on previously painted wood and

wood based surface with enamel paint, to

73 give an even shade including cleaning the

of all dirt, dust and other foreign matter.(b)

Ready mixed paintbrushing priming for

10 enamel 26.78 Sqm

Extra over Above item for every sub

74 sequent coat of paint.

Painting two coats (excluding priming

coat) on new wood and wood based

surface with ready mixed paint,

75 brushing, oil, gloss, semi gloss to give and

even shade including cleaning of all dust,

dirt and other foreign matters and

5 papering and stopping. 104.12 Sqm

Finishing wall with weather proof exterior

emulsion paint on wall surface (two

coats) to give an required shape even

76 shade after thoroughly brushing the

surface to remove all dirt, and remains

of loose powdered materials.etc

5 complete 113.4 Sqm

Applying two coats of Birla (white

cement based) or Asian

(acryliclapy-putty) or equivalent & two

coats of primer of approved brand and

77 manufacture on new wall surface to give

an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and sand

20 papered smooth. 40.19 Sqm

Painting one coats (excluding priming coat)

on previously painted wood and wood

based surface with enamel paint, to give an

78 even shade including

cleaning the of all dirt, dust and other

foreign matter.

Writing letter or figures on any

surface with black japan paint (stops,

comas, hyphens and the like not to be per

measured and paid for separately) letter

(i) Block (Letters/Figures) (Per 10 Letter per

10 pet CM.HT) 3.15 Cm/Ht

Demolition including stacking of

serviceable materilas and disposal of

80 unserviceable materials with all lead and

2 lift. (i) R.C.C. work 1047.38 Cu.M.

Demolition of Brick work and stone masonry

including stacking of serviceable materil

81 as and disposalof unserviceable materials

2 with all lead and lift.(ii) In Cement Mortar. 544.95 Cu.M.

Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

82 materil as and disposal of unserviceable

5 materials with all lead and lift. 47.25 Sqm

Dismentaling of sheet roofing

including ridges, Hips, Valleys, Gutters

etc. stacking of serviceable materil as

and disposal of unserviceable

materials with all lead and lift.(i) G.I.sheet

5 roofing. 47.25 Sqm

Dismentling steel work including

84 distempering and stacking the

5 materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows,

ventilators etc. (wood or steel) shutters

including chowkhats architraves, hold

85 fasts and other attachment etc.

complete and stacking the material within

all lead and lift.(i) Not exceeding 3 Sq.M. in

2 area. 185.85 Each

Dismentling doors, windows,

ventilators etc. (wood or steel) shutters

including chowkhats architraves,hold

86 fasts and other attachment etc.

complete and stacking the material with

in all lead and lift.(ii) Exceeding 3 Sq.M.in

2 area. 248.85 Each

Dismentling barbed wire in fencing including

making rolls and also including

dismentling fencing posts including all earth

work concrete in base and making

87 good the disturbed ground stacking

useful materials as directed and

disposing as directed and

disposing of the unserviceable

5 materials with all lead and lift. 66.15 Rmt

Dismentling C.I. pipes G.S.W. pipes

abd A.C. rain water pipes with fittings

88 and clamps including stacking the

materials with all lead and lift (for any dia, of

5 pipe) 74.03 Rmt

Dismantling santtary fittings like wash

basin . W.C. pan Indian and Europe an

89 type, flushing tank etc. including stacking

2 the materials with all lead and lift 401.63 Each

Scraping oil paint from steel and other

90 metal surface and making the surface

5 even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old

deteriorated plaster of any

thickness from wall / R.C.C member

91 including stacking of serviceable

material and disposal of unserviceable

from site of work with all lead and lift

Providing and fixing M.S. fan clamps

of shape and size as specified in

92 existing R.C.C. slab including cutting

2 chase and making good. 168.53 Each

Cutting out cracks of roof terrace to V-

section, cleaning out, wetting, grouting

93 with cement and sand slurry 1:3 (1-

5 cement 3-sand ) 64.58 Rmt

Cutting out cracks roof terrace to V-

Section cleaning out and filling solidly

94 with a hot mixture of bitumen and

5 clean dry sand (1:1 by weight) 75.29 Rmt

Providing & Fixing in position

Alluminium doors with frame using

approved quality anodised

extruded alluminium section as

approved by Engg.in charge(Jindal

alluminium)(a) Frame sections

101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

bottom section at 114.3x44.45 mm at (1.37

kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing

5 mm thick approved color Acrylic

sheet of standard quality fixed with

glazing chips on upper pannel &

Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction Sq.

1 of engg.in charge.(N.S.) 2,900.00 M.

Providing & Fixing in position Fully Panelled

/ Partly Panelled Partly Glazed / Fully

Glazed Alluminium doors with frame

using approved quality anodised

extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium )(a)

Frame sections 101.6x44.45 mm b)

Shutter vertical & top section

kg/mt) © Shutter bottom section at

x44.45mm at ( 1.37 kg/mt ) Shutter

middle section at 100x44.3 wt. (1.37 kg/mt )

incl. providing & installing 5 mm thick

Glass of standaed quality fixed /

mm thick Laminated sheet with glazing

chips (wt. 0.13 kg/ Rmt) in panels etc.

comp. as per Detail Given & direction

1 of engg.in charge. 4,583.00 Sq.M.

Providing & Fixing in position

Alluminium window 2/3/4 track sliding

/ fix type with frame using approved

anodised extruded alluminium section as

97 approved by Engg. In

charge.(Jindal alluminium) units

equivalent. including P/F installing 5 mm

thick clear/tinted Glass of standard

quality etc.comp. Sq.

Providing & Fixing in position

Alluminium vents with frame using

approved anodised extruded

alluminium section as approved by Engg.

98 In charge.(Jindal alluminium) units

equivalent Frame section of 63.50 x

mm. (wt.0.68 Kg/Rmt) incl. Providing

& Installing 5 mm thick Glass of Sq.

1 standard quality etc. comp. 4,218.00 M.

Providing and fixing of Ridge

flashing for roof panel shall be made

out of 0.5 mm thick pre coated GI

sheet. The Pre coatedsheet shall be of

minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns

epoxy primer on both side of the sheet

99 and polyester top coat 15-18 micron. The

PP GI Sheet shall have plastic

protective guard film of minimum

microns to avoid scratches during

transportation. The ridge shall be fixed to

the steel members by poprivetor self

drilling/self stitching fastners @

maximum 450mm c/c along length of

capping/flashing etc complete .

Supplying and fixing vinyl flooring over

the surface having 1-2 mm thickness

100 as per directed by engineer

2 incharge etc as completed (N.S.) 963 Smt

Providing and laying 15mm

bamboza wooden flooring as per

architect's drawing with all

necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications

and directed by the project consultants.

1 (N.S.) Approved Rate ) 2,690.00 Smt

Providing and fixing 1.20 Metre high

fencing with 2.0 Metre long M.S. Angle

posts 40 mm x 40 mm x 6 mm and oil

painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two

102 diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,

staples including fixing the posts in

ground with 0.5 M x 0.5.M x 0.5 M. block

1 in C.C 1:5:10 etc complete. 385.4 Rmt

Renovation and Repairing work in

Chainlink fencing any size and also

refixing work incl. febrication work with

103 all materails to be painted one coat of

primer and twocoats of paint as directed

inline and level. (N.S.)

Constructing a sink (chowkedi) with

C.C. 1:2:4, 12 cm. thick over B.B.

masonry in C.M, (1:6) in front and dwarf

104 wall 1.0 Mt. high and 23 cm. thick

cement plaster to masonry / in C.M.1:3)

and cement concrete flooring in 1:2:4:

mix 5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm.

width and 70 cm high resting on B.B.

Masonry walls 23 cm. thick in C.M. (1:6)

with (i) Fixing or precast R.C.C. 1:2:4)

105 8 cm. thick slab with marble chips set in

C.M. (1:6) (6 mm thick terrazo) with

plastering on exposed faces walls in C.M.

(1:4) etc complete.

Extra rate for using Ready Mix

Concrete of any grade for below ground

level to vertical upto any floor with

106 delivery & suction Pipe & Pump etc. The

rate includes fule, pump operator, skilled

labor, driver etc completed and as per

direction of engineer in charge

P/A Tremix with dewartering

machine and floater machine on

constructed CC work for finishing the

surface as per requirement. The rate

including all machinaries, labor,

loading, unloading, transportaion etc

complete as per direction given by

10 engineer incharge. 54 Sq.M.

Carrying out timber treatment to all wood

work including drilling holes and spraying oil

based chemical solution on surface of

timber work for termite control including

labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part

III (1% concentration by mass) is

recommended one litre chemical emulsion

diluted with 19 liters of kerosene. Total

diluted concentration will be 20 liters

inclusive of 1 liter chemical emulsion

application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood

5 surface not protected by paint or varnish. 54.98 Smt

Applying general insecticide pest control

treatment to floors, cupboards etc including

labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II(

(0.075% concentration by mass) is

109 recommended 10.5ml chemical diluted with

5 liters of water application 0.5 litre

chemical /Sqm of

surface is recommended as per I.S.

Carring out plinth treatment to post

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consist ment with I.S. specification.

Using Chlordene and Chior purfiles

EC. As Per 6131_paret-II

Consentration Weight on percentis

recommended i.e one litre 20 EC

chemical emulsion with 19 liter give

1% concrentration inclusive of one litre

chemical emulsion appication attherate

of 5 Litre chemical / Sqm of surface

5 is recommended as per I.S 104.9 Smt

Carrying out wall treatment for termite

control including spraying with chemical

solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per

IS 6313 part - II (1% concentration by

mass) is recommended i.e one litre

emulsion diluted with 19 liter oil base. Total

solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of

7.5 litre chemical / Sqm of surface is

10 recommended as per I.S.S 37.34 Smt

Providing erecting and fixing double

coated Syntex or equivalent PVC.(ISI)

112 water tank of required capacity each

with all necessary fittings and connection

etc. complete on terrace.

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes

(Medium grade) of the following

nominal bore, tube fitting and clamps

including making good the wall ceiling and

1 (F) 50mm 779.6 Rmt

Providing and laying in trenches

galvanised mild steel tubes (Midium

grade) of the following nominal bore,

and tube fitting (Earth work in

trenches to be measured and paid for

Making connection of galvanised Mild

steel distribution branch with galvanised

mild steel main 50 mm to 80 mm

nominal bore by providing and fixing

tee including cutting and threading the

2 pipes complete. 600.08 Each

Providing and fixing to wall ceiling and floor

6.0 Kg.F/Cm2 working pressure

poluthene pipes of the following out

116 side Dia. Low densidy, complete

with special falnge compression type

fittings,wall clips etc.including making

good the wall ceiling and floor.

Providing and fixing to wall ceiling and

floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out

117 side Dia. Low densidy, complete

with special falnge compression type

fittings, wall clips etc. including making

good the wall ceiling and floor.

5 (C) 32mm 116.4 Rmt

Providing and fixing cast iron (Spun)

Nahni trap of the following nominal

diameter of self cleaning design with C.I.

118 screaed down or higned grating

including cost of cutting and making good

the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet

squatting Pan (Indian type

W.C.Pan) size 580 mm (Earth work,

119 bed concrete, foot rest and trap to be

measured and paid for separately) (A)

Vitreous China. (I)Long pattern = White

2 colour 926.1 Each

Provdg. & fixing wall mounted White

/ Color Vitreous China European

water closet with integral P trap

120 of "Cera" - Clair Series or equivalent

incl. seat cover , Chair Bracket etc.

complete as per direction of engg. In

2 charge.(N.S.) 4,250.00 No.

Providing and fixing wsh down water

closet (Europe an type, W.C.Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement

Mortar1:1 (1- Cement:1-fine sand)

(Seal and cover to be measured and paid

forseparately) (A) vitreous China

1 Pattern :(i) in white colour 1290.8 Each

Provdg. & Fixing Flat Back Large Urinal of

White/ colour of "Cera" or " Hindware" incl.

122 C.P. Brass waste coupline , waste

pipe, pvcconnection etc. Complete.(

size 635 x395x420 mm )

Providing & Fixing Angle cock of " Ess

Ess" - Trend series or equivalent

123 standard make as approved by engg.

1 in charge all complete. (N.S.) 675 No.

Providing and fixing 100 mm size P or

S trap for water closet squatting pan

124 including jointing the trap with the pan

and soil pipe in cement Mortar1:1 (1-

Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing wash basin with

single hole for pillar tap with C.I.or M.S.

brackets painted white including sutting

125 holes and making good the same but

excluding fittings. (A) Vitreous China: (ii)

Flat Back wash basin 550 mm x v 400 mm

size.(i) In white colour.

Providing and fixing Kitchen sink with C.I.

or M.S. brackets, painted white including

cutting holes in walls and making good

126 the same but excluding fittings. ©

Vitreous China Sink. (i) 600 mm x 450 mmx

Providing and fixing 600 mm x 450 mm

bevelled edge mirrror of superior

127 glass mounted on 6 mm thick A.C. sheet

or ply wood sheet and fixing to wooden

pluge with C.P. brass screws and washers.

Providing and fixing chromium plated brass

128 halftrun flush cock of approved quality

including fixing in pipe line etc. complete.

Provdg. & fixing White / Color

Vitreous china Counter wash basin with

signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to

be fiited in stone counter with necessary

brackets painted white incl. cutting

129 holes and making good the same .Cost

Includes P/F C.P. brass waste

coupline, 32 mm dia fisher union ,15 mm

dia. Pillar cock & Angle cock of " Ess

Ess"- Trend series ,32 mm dia. Waste

pipe etc. complete as per dir. of engg.

1 in charge. 2,950.00 No.

Providing and fixing washbasin with single

holefor pillar tap with C.I. or M.S. brackets

painted white including sutting holes and

130 making goodthe same but excluding

fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v400mm size. (i) In

1 white colour. 1400.18 No

Providing & Fixing S.S.304 Grade Sink

of Nirali / Krishna or Equivalent

131 Make for Kitchen Platform of size :

24":x18" as per Direction of engg. In

1 charge 4,650.00 No.

Providing and fixing C.P. brass towel

rail comlete with C.P.brass brackets

132 fixed to wooden plugs with C.P. brass

2 scews.(B) 600mm x 20mm size. 597.22 Each

Providing and fixing 600 mmx120 mm

glass shelf with C.P. brass bracket and

133 guard rail complete mixed to wooden

2 plug with C.P.brass screws. 561.03 Each

Providing and fixing toilet paper holder.

134 (A) C.P.Brass

Providing and fixing screw down bib taps

135 of following size. (A) Brass screw down

bib tap polished bright.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps

136 of following size. (B) Brass chromium plated

screws down Bib Tap.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps

137 of following size. © Gun metal screw

5 (i) 15mm dia. 157.29 Each

5 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan

138 head, screw down high pressure with

screws, shanks and back nuts.

5 (i) 15mm dia. 305.67 Each

5 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check

139 or non-return fullway wheel valve.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 201.8 Each

5 (III) 25 MM DIA 416.47 Each

5 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

5 (i) 20mm dia. 252.26 Each

5 (ii) 25mm dia. 261.16 Each

5 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or

approved quality including

conecting the Urinal with waste pipe

tap etc.complete. (A) White earthen ware

flat back or corner type size 430mm x

2 260mm x 350mm. 1026.01 Each

Providing and fixing Urinal of

approved quality including

connection with trap and with integral

longitudinal flush pipe. (A) Squating

plate pattern white earthen ware

2 550mm x 300mm. 1535.63 Each

Providing and fixing chromium plated,

143 bottle trap with necessary couplings of

5 approved quality for wash basin. 292.87 Each

Providing and fixing ball cock

144 ofapproved quality as directed. (A)

5 Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of

145 approved quality as directed. (B)Abonite

5 (i) 25mm dia. 101.89 Each

Filling with good Quality thor as and

where directed by the Architect /

Engineer-in-charge, in sunk in layers of

146 cm. thickness, including watering,

ramming well etc. complete, as directed

by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and

level 15 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

147 the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with solvent, including

cost of all materials.adhesive

Providing laying and jointing in true line and

level 25 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on

148 the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and

level 32 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

149 the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and

level 40 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

150 the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and

level 50 mm dia. U.P.V.C. Pipe (SCH-40)

for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX

or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on

a the wall with the help of clamp at every

two metre C/C or shall be concelled

as directed including necessary fittings

etc. including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

Providing in line level plumb,

fabricating and fixing three row

horizontal barbed wire fencing and punched

tape concertina coil of 9 turns per meter

of 610 mm dia fixed with clips on top of

the angle iron posts. The punched

tape concertina coil having sharp barbs at

every 25 mm spacing shall be 0.5 mm

thick and 19 mm width and weighting

kg/100 mt. (Average) as per manufacture's

specification. The rate shall also

include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00

mt.c/c spacing embaded in RCC column,

angle posts shall be painted with one coats

of red oxide and two coats of enamel

paint of approved quality at top compound

2 wall. 390 Rmt

Fixing sun film for protection sunlight in

152 black or any colour as as directd by

1 engineer In Charge.(Market rate) 850 Smt

Providing & Fixing 3 mm thick

F.R.P.sheet of Approved Quality & Color /

Pattern as per Consultant's design also

includes required fabrication structure in

the grid of 2'-0x2'-0 size using hollow

pipe of16 gauge & size 2"x1" & 1"x1"

153 ,G.I. & Bitumen Washers, Silicon paste

application for fixing the sheet . Rate

also includesnecessary bending, cutting,

labor charges , Zinc Primer coat & Two

coats of oil painting of color as approved

by consultants & making good the wall.

Providing 2 mm thick F.R.P. Gutter with

154 necessary M.S. Supporting Brackets.

2 (N.S.) 400 Rmt

Providing & Supplying JCB Machine on

rental basis in case of emergency situation

and break down type work & also during

unavoidable condition as per instruction of

engg. in charge, rate includes all nece.

155 shifting, fuel and operating charges and

stacking of useful & non-useful materials

separately up to store. (No payment should

be allowed for non working condition of

machinery and for pipe line excavation and

8 laying work) 535.71 Hrs.

Hiring charges for Tractor with Trolley,

156 Considering 8 hrs.as Working day hours

1 incl.dirver 2,104.09 No.

Roller Blind Providing and fixing Roller

Blind curtain fixed on window level

on wooden batten and curtain lift with

cotton thin rope, make of aerolax

157 or equivalent design and colour as per

instruction by engineer – in – Charge

with necessary hardware fitting, material

and labour etc complete.

Providing & Fixing Door closer - complete of

158 Approved make to wooden / Aluminium

3 Doors as per direction of engg. In charge. 560 No.

Providing and fixiing M.S. Fan clamps type

1 of 16 mm dia M.S. bar bent to shape with

159 hooked ends of R.C.C. slabs during laying

incl. painting the exposed protion of loops,

all as per standard design complete.

Providing cement vata (10cm. x 10 cm.

size) quarter round in cement mortar 1:1

including neat cement finishing, watering

5 etc. complete. 23.45 Rmt

Making Water connection from exi.Muni.

161 Water line (N.S.)

Providing and applying fibere

reinforced cementitious micro

concrete work in cellings and beams

incl.mixture of CEMSCREED HM

(F) fair mate company material, FBR

162 bonding agent material with water in

suItable proportion anti corrosive

treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of

labour etc.comp.including three coat

5 of white wash.(Approved Rate) 530 Smt

Providing and Fixing 1 H.P. Electrical

monoblock or submarcible water pumps

163 withmotor and required cable and switch

board of approved brand and make

etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement

for R.C.C. work including bending, binding

and placing in position complete up to floor

10 two level 66.59 Kg.

ProvidingTMTBarFE500/500Dreinforcement

for R.C.C.workincluding bending,binding

and placing in position complete upto floor

two level placing in position complete upto

floor two level placing in position complete

50 upto floor two level 75.46 Kg.

Providing and fixing 30mm thick solid both

side prelam PVC door shutter (sintex door-

164 equivalent) with necessary alluminium fitting

1 with EL-7 section frame 2,867.00 Smt

CONVEYANCE CHARGES-FOR

DIFFERENT TYPES OF MATERIALS (A)

165 lime murrum building rubbish earth manure

or sludge & execavated rock and rubbish

[Lime murrum building rubbish]

10 a) Lead up to 1 Km. 256.16 Cmt.

10 b) Lead From 1Km to 2 Km. 278.18 Cmt.

10 c) Lead From 2 Km to 3 Km. 296.43 Cmt.

10 d) Lead From 3 Km to 4 Km. 312.45 Cmt.

10 e) Lead From 4 Km to 5 Km. 326.73 Cmt.

Providing and laying polished granite stone

slab 18 mm thick in risers of steps, dedo

and pllars laid on 10 mm thick cement

166 mortar 1:3 (1 cement:3 coarse sand) and

jointed with gray cement slurry including

rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to

existing alluminium framing and making

167 grove as per design and finished with

royal plastic paint as per instruction of

engineer incharge. (N.S.)

Providing and laying 15mm

bamboza wooden flooring as per

architect's drawing with all

necessary details as directed by the

project consultants. Use underlay for

better result as per Detail specifications

and directed by the project consultants.

1 (N.S.) (Approved Rate ) 2,690.00 Smt

Applying two coats of Birla

(whitecementbased) or Asian

(acryliclapy-putty) or equivalent & two

coats of primer of approved brand and

manufacture on new wall surface to give

an even shade including thoroughly

brushing the surface free from mortar

50 dropping 40.19 Sq.M.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats)

170 to give an required shape evenshade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

50 materials.etc complete 113.4 Sq.M.

Providing and fixing flush door

shutters, solid core construction with

frame of first class hardwood with cross

board and face veneer or plywood face

panels, with both side 1 mm laminate

finishing including anodized aluminum

butt hinges with necessary screws.

Decorative type and pine wood core

anodized minimum 3 no 150 mm long

aluminum butt hinges in flush door

171 shutters with 2 no of brass holdfast

mm long 1 no brass tower bolt 250 mm

long and two no of 150 mm long brass

door handle . Decorative both side

laminated Flush door 35 mm thick. with

frame of 10 cm x 7 cmt Indian teak

wood frame including all necessary

fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift

height up to 45 mtr from GL etc complete as

per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details

sketch & instructionof engineer in charge

same as lal darwaja garden pattern

consisting of 3'dia. M.S black pipe 'A' class

5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10

gauge fixed in 35x35x5 mm MS angle

frame 8'x4' size with MS flat of size 25x3

mm welded jali etc.comp.The jali is to be

welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S

angle frame are to be painted one coat of

primer and two coats of paint as directed in

2 line and level. (N.S) 1,230.00 Rmt

Providing & Fixing masonary wall with

porbandar lachiya stone with well dressed

grooveas per directed by engg.in charge for

foundation, plinth or super structure level

(above plinth level upto floor two level) in

cement mortar 1:5 (1-cement : 5-fine sand)

incl.pointing the joint with white cement and

yellow oxide powder in proportion to match

stone colour the joints should be thread

grooved as per exi. lake stone pitching

(A) stone masonary wall/stone dressed

1 single faced (size 15"x8"x9") 8,990.00 Cmt

1 (B) stone coping (size 15"x8"x4") 510 Rmt

1 (C) stone coping (size 15"x8"x9") 790 Rmt

0 (D) stone column (size 15"x15") 10,710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x

mm-B x 380 mm-H Kerb Block for Footpath

in M-20 grade using 20 mm nominal size

black trap aggregate of Sevaliya/Timba or

equivalent quality for pre-cast blocks,

reasonably exposed finish/ formwork

mould with well equipped with vibratory

system for kerb stones of approved design

including curing, etc. complete, including

the cost of formwork etc. complete. The

rate shall also include necessary cutting of

174 10 asphalt, fixing the Kerb stones in line and 350.89 Rmt

level on 5 cm thick sand bedding with

necessary equipments and materials. The

rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones.

Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete mixed

in proper position as directed by Engineer in

change to form a portable mixture. In any

case Gravel or such type of materials shall

not be allowed for production. a)Laying on

cm thick Sand Bedding.

Providing and Laying of Rubber Moulded

Paver Block Grey/Coloured 60 mm thick, M-

35 Grade of any size;shape (Usually Uni-

Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for

footpath, parking areas, service lanes

and other areas as mentioned in the

drawing/instruction of engineer in charge.

Cost includes formworks using rubber

mould, Rate providing and laying paver

blocks as per required grading and

specification. The paver block shall be

mechanically compacted. The work of

paving blocks shall be executed in line and

level by skill mason of flooring work only. It

should be laid in such a way that the no

cutting of the paver block to be necessary. if

cutting of paver block necessary then it

should be cut by machine only and carting.

The finished surface of the paver block shall

have resonably good, plain finished. Paver

blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of

materials shall not be allowed for

production. Laying on 5cms thick sand

Provoding and fixing flush door shutters,

solid core construction with frame of first

class hard wood with cross board and face

veneer or ply wood face panels, including

anodised alluminium butt hinges with

necessary screws. (B) Non- decorative type

and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of

paving with cement pointing in CM 1:2,

including watering, ramming etc comp. as

1 dir.For pavement 1779.97 Smt

Labour work for fixing Interlocking Blocks /

any kind of pavement on up to 50 mm thick

177 sand bedding, levelling, watering and fixing 68.64 Smt

in line & level as well cleaning the site

5 etc.comp. as directed.

Box type metal letters forming composite

box made from 1mm thick stainless steel

plate of grade 304 having brush finish of

178 following font size to be fixed at Main Gate

in english and or Gujrati and including fixing

charges approved before fixing by clent /

A 1 400mm high 1,000.00 Nos.

B 1 300 mm high 750 Nos.

C 1 230 mm high 565 Nos.

Providing and fixing false ceiling at all

height including providing and fixing of

frame work made of special sections, power

pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts

& bolts of required size and other end of

angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of

mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at

450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing

of gypsum board to ceiling section and

perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush

finish of tapered and square edges of the

board with recomme-nded jointing

compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats

of primer suitable for board, all as per

manufacturer’s specification and also

including the cost of making openings for

light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably

fixed, all complete as per drawings,

specification and direction of the Engineer

5 in Charge but excluding the cost of painting. 850 Smt

Providing & Fixing SPEED BUMP - #2 No

(1 black, 1 yellow) 350 x 500 x 50 mm, Size

per color End Cape 350 MM x 175 MM x

MM TOP DESIGN - Lining Top flat ANTI

SKID PATTERN FOR GRIP COLOUR :-

YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer

Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/

woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE) :-4 holes & END CAPE :-

2 HOLE HEX Bolts with Washer Epoxy for

Bolt Fitting etc. complete as directed by EIC

Providing and fixing of Roller blind

curtain/blackout. The fabric shall be woven

from formulated platisol extruded over a

polyaster yarn.The fabric shouldl be

181 weaved to provide subtle view of the side of

the blind and should offer elimination of

glare and sunlight radiance upto a minimum

of 80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain

colour false ceiling with grid type with

aluminium frame from gypsteel, fastners

,props, Finishing as per architectural

drawing allowing openings for

A.C. Diffusers, Light/Electrical Points

etc –complete, Prior to fixing on

frame.(Brand : Anutone or

equivalent ) (N.S.) or as directd by engineer

2 In Charge. 933 Smt

Provdg. & laying S.W. Gully trap with brick

masonry chamber & water tight G.T.Stone

183 including fixing of covervSquare mouth trap

2 100 mm x100 mm size P-Trap 1,263.15 No.

Providing cement vata (10cmx10cmsize)

quarter roundin cement mortar 1:1 including

neat cement finishing, waterin getc.

10 complete. 23.45 Rmt.

Providing and laying (to level or slopes) and

jointing with stiff mixture of Cement Mortar

185 in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints

complete.(A) 100mm dia.

Providing and laying (to level or slopes) and

jointing with stiff mixture of Cement Mortar

186 in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints

complete.(B) 150mm dia.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

187 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

1 deep for single pipe line. 2903.89 Each

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame

188 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- 3624.51 Each

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i)Inside

dimensions 500mm x 700 mm and 450mm

1 deep for pipe line with one or two inlets.

Providing, supplying and fixing pre cast

C.C. blocks (M-20) edge kerb having size of

75 x 300 x 300 mm depth and as per design

189 conveying it to the site, jointing into C:M 1:3 195.54 Rmt.

and racking out the joints incl. necessary

excavation of asphalt, soil etc. completed. (

Constructing a cooking Sandwich platform

60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6)

190 with (ii) Fixing black Granitee 30mm thick

laid on precast R.C.C. (1:2:4) slab with

plastering on exposed faces of wall in C.M.

(1:4) etc complete

Providing and fixing hard drawn steel wire

fabric 75mm x 25mm mesh or weight not

191 less than 7.75 kg. per Sq.M. to window

frames etc. including60 x 20mm beading of

1 teak wood. 754.65 Smt

Providing & fixing 15 cm wide chicken mesh

jali with nails & then application of 15 mm

192 plaster on R.C.C.& masonary joints as per

5 dir.of engg.in charge 35 Rmt.

Providing and laying cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal

size) laid in one layer and finished with a

floating coat of neat cement. (A) 50mm

5 thick. 348.08 Smt.

Providing and constructing, Underground

(U/G) water tank of specified capacity, on

specified location, for all depths, in

controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost

of form work and reinforcement,with inside

and outside plaster in CM 1 :3 and water

194 proofing treatment as per IWP

specification,including injection, grouting,

etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m.

size medium duty CI manhole cover/s at

top, including wash out pipe line and inlet

500 and outlet connections etc. complete. 6.5 Litre

Providing and fixing PVC Printed pain

colour false ceiling with grid type with

alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as

panel insert in a frame work made using

anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in

square pattern of grid sizes of 2 x 2 (600 x

600mm) The alluminium frame work is

supported from the cceiling with the help of

G.I. hook and G.I. wire/6mm M.S. rods of

required sizes to maintain proper level etc.

The aluminium frame work is supported on

side wall with the use of alluminium L

section of size 1 x1 (25 x 25mm) angles etc.

complete as per direction of Engineer in

charge. Manufactures specification and

Supplying, labour for excavation of all type

of soil at any depth including excavation of

asphalt pavement of any

thickness,demolition of brick work in cm of

any proportion including stacking of

serviceable materials and disposal of

unserviceable material rtc comp. as

Mazdoor(male) at day/night(r&b sor 2023-

A 24,sr.no.1051,code no.L022)

Mazdoor(Female) at day/night(r&b sor

B 2023-24,sr.no.1050,code no.L021)

Fitter/makadam/supervisor at day/night(r&b

C sor 2023-24,sr.no.1043,code no.L014)

Supplting of welding machine / gas cutter

including cost of welding rods/gas,

D 1 Transportation, including carting from site to 1500 No

Supplying Pneumatic Breaker Machine for

RCC Slab or Asphalt Demolishing Work on

site by using Operator, fuel, power Supply

etc. Complete as Directed. (No payment

should be allowed for non working condition

of machinery and for pipe line excavation

and M.H. work. Allowed only for break down

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

198 (NSF) seal for potable water of following

dia. Nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete.

A 4 15 MM DIA 165.21 Rmt

B 1 20 MM DIA 202.97 Rmt

C 1 25 MM DIA 247.25 Rmt

D 1 32 MM DIA 330.36 Rmt

E 1 40 MM DIA 437.66 Rmt

199 1 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x

300mm without frame for Gulley trap

200 (Standard pattern) te weight of cover to be

1 not less 4.53 Kg.) 491.8 Each

Providing and fixing to wall ceiling and

floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out

201 side Dia. Low densidy, complete

with special falnge compression type

fittings, wall clips etc. including making

good the wall ceiling and floor.

Constructing Bombay Pattern Type Catch

Pit of size 0.60 x 0.60 depth up to 1 mt

including excavation, B.B.C.C. (1:5:10),

cms thick brick maso. wall in the prop. of

202 1.00 CM (1:6) with 40 mm thick IPS flooring in 3110.80 No

the prop M15 at bottom and 15 mm thick

cement plaster inside the catch pit in the

proportion of CM (1:3) with out jali etc.

comp. as directed.

CatchPit Jali (Heavy duty) Fixing P/F FRC

catch pit jali with frame 600mm x 600mm

clear opening etc. comp.. As directed by

engineer in charge.

Constructing Slab type M.H. Chamber of

the following size including excavation,

refilling, brick bats cement concrete (1:5:10)

of thickness 15 C.M., CC Channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick

cement plaster inside & outside (Only for

shaft) in CM 1:3, finishing with cement

slurry, P/F 4 mm dia M.S.Steel HDPE

coated steps 35 cm c/c at 35 cm staggered

in masonary CM 1:5, RCC Slab in CC

1:1.5:3 of thickness 23 C.M., including

Cantering & reinforcement (double jalli at

C.M. c/c bothway 12 mm dia.) but excluding

the cost of Manholeseat cover

etc..completed. of Size 1.00 X

meter (Inside Clear,M.H. length should be

parallel to the flow, for pipe dia <= 800 mm)

(Based on Drainage SOR 2009-10)

1.00 to 2.00 meter depth, (Slab at Ground

Repairing damaged M.H. and rasing M.H.

up to road level incl. removing damaged

brick work and repairing by brick masonry in

205 C.M. 1:5 and plaster in C.M. 1:3 and fixing

C.I. steps and existing MH sheet cover,

removing the debris from MH and carting

the same as directed.

1.00 (A) up to 0.15 mt. (@ Two Coarse) 728.82 No.

1.00 (B) up to 0.35mt. (@ Four Coarse) 1155.44 No.

1.00 (C) up to 0.65 mt. (@ Seven Coarse) 1786.49 No.

Constructing Chamber of following size

including excavation, refilling, BBCC

(1:5:10) for foundation, C.C.Channel

(1:2:4), finished 15 mm thick cement plaster

inside in CM 1:3, finishing with cement

slurry, Brick masonary in CM 1:5 &

excluding the cost of chamber seat cover

0.60 X 0.45 mt. size Inside Clear,

1.0 Depth from 0.0 to 0.90 meter

0.60 X 0.75 mt. size Inside Clear,

1.0 Depth from 0.0 to 0.90 meter.

0.75 X 0.75 mt. size (Inside Clear) Depth

1.0 from 0.0 to 1.20 meter.

Providing F.R.C. MH seat cover incl. carting

207 to the work site etc. comp. Directed.

(SET cover and frame) F.R.C. Light Duty

[LD-2.5] Machinehole Covers &

Frames560mm ø clear opening, The

1 dimension of frame and cover as per 1915.14 SET

mentioned in Amend No.1 to IS 12592 :

2002 table 1 (As Per Central stores circular

208 (GWSSB SOR 22-23 Sec-1.A Item no.11

Providing and supplying ISI marked only

Standard length Stoneware pipes in

standard lengths of following class and

diameter including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores,

stacking etc. complete. (IS - 651 /

1989)(GWSSB SOR 2022-23,page no- 40)

Lowering, laying and jointing stone ware

pipes of following diameters with cement

joints in C.M.1:1 proportion in proper

position , grade and alignment at all level as

directed by Engineer-in- charge including

conveyance from stone to site of work,

Jointing material etc.comp.(GWSSB SOR

2022-23,page no-66)

Providing & Fixing of FRP Chabutro,

GSM Matt, Surface Matt, Resin, Gel Coat,

Dye Moulding, Fiber Reinforcement Plastic,

Dye Moulding and Assembling. Dia : 18",

Height : 12½', Bird Feeder : 2.5' x 2.5'

Square Shaped, 4 supporting pillars. M.S.

Pipe 75 mm dia, 6' Height, Reinforcement

of FRP Chabutro Foundation Pipe. CC

work for foundation of Chabutro as per

requirement, Brick Work and Plaster 5' x 5',

height 1', Steel Work welded in built up

sections frame using 50x25 mm MS Verticle

pipe. Horizontal Pipes of 25 mm round

shape of 4 ft height to be fitted in the

horizontal pipe after doing hole in horizontal

pipe and dong welding work. 4 Vertical

Pipes of 50 mm x 50 mm square shape to

be fitted in four corners of the platform area

and the fifth pipe of 50 mm x 50 mm square

to be fitted with the gate at entry area. work

including cutting, hoisting, fixing in position,

grinding and cleaning. Good quality

synthetic base auto paint. Granite Takhti of

2 ft x 1 ft to be fitted after preparing MS

frame and welding to the vertical and

horizontal pipes. 125000 No.

Gazebo:Providing and fixing 13' ft x 13'

ft.square type gazebo in 12' ft height,having

domes looking like bamboo or tree

branches in appearance.Above all items

making from PREG-plastic reinforced

pyramid shape frp moulded dome with

pillars and grilled design between two

pillars,frp dome constructed with 400 GSM

Emulsion mat,cobalt,catalyst,resin and

other allied chemicals.

Dimension:13' x 13',height:13',4 pillars for

strong structure of dome.FRP moulding as

a proof. Commissioning as per direction of

engineer incharge.

(in words also)

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

"South West Zone, Zonal Office", Opp.karnavati club, Jodhpur Ahmedabad.

Municipal Commissioner invites Percentage Rate sealed tenders from interested contractors .

1 Name of work Diff AMC Building like ward office, muster station, school, building,

aganvadi, amc various building, public toilet block & urinal block

repairing and Renovation work in bopal ghuma in south west

zone.(A.R.C) Re invite

2 Time Limit 12 Months (Excluding Monsoon)

3 Eligibility Criteria Register “E2” class in PWD in Govt. R&B/CPWD/AMC or equivalent

registration with any other state Govt. or institutions.

4 Estimated Cost put to tender Rs. Rs.9,99,850.00

5 Earnest Money Deposit Rs.9998/-(Demand Draft, Pay order, Bank Guarantee (As per finanance

circular No 56) or Cheque in favour of Municipal Commissioner,

Ahmedabad) To be submitted as prescribed in 7.0 below. Demand Draft

or Bank Guarantee shall be from Nationalized Bank and valid for 120 days.

6 (A) Security Deposit: 5% of Tender Amount

(B) Retention 1. @ 2% of the value of work done will be deducted from each RA bill. It

will be released along with release of payment of Final Bill.

7 Tender fees Rs.900/-Demand Draft / Pay order infavour of Municipal Commissioner,

(Non refundable) Ahmedabad)

8 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to Assistant

South West zone) , Ahmedabad Municipal Corporation, Late Shree Tushar

Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway,

Jodhpur, Ahmedabad-380015

9 Tenders issue date Tenders from the website http://amc.nprocure.com and

http://nprocure.com. shall be down loaded from

10 Last date of receiving Dt.02.03.2026 up to 18:00 Hrs The tenders received after this date

Tenders. and time will not be entertained under any circumstances.

11 Date of Opening Dt.03.03.2026 at 17.00 Hrsto Assistant Manager "South west Zone

Shree Tushar Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club,

S.G. highway, Jodhpur, Ahmedabad-380015

12 Mode of sending the Tender Document shall be submitted in sealed envelope systems By RPAD/ Speed

Documents post/ Hand Delivery/ Courier in sealed covers as described in submission

13 Terms, Condition, & All general condition of contract of Form B1 condition of contract shall be

Specification applicable.

14 GST ltKtkFtðþvhevºtlkch - 31, yb>tJt> BGþrlrm5j ftuvtuohNlbtkÍtuljytuVem / v.J.yu. / «tusu¾x rJCtdîththtuz /

<t.07-07-2017 Bþsc rcÕz´d/jtEx/c{es Ft<tytuîthtcnthvtzJtbtkytJujtxuLzhsuLþkmcbeNl<t.01-07-2017

vAefhJtLþk&tg Au, <uJt<btbxuLzhtubtk<&t

nJuvAecnthvtzJtbtkytJlthWvhtuf<rJCtd/Ft<tltk<btbxuLzhtubtk (bxehegj +

juchmÃjtgmt&u) GSTltltuxeVefuNlBþscGST sgtkjtøþvz<tuntugðgtk, m>hnwkftbltBidder

yuGST ltuxeVefuNlBþscleyuÃjefucejexeægtlbtkhtFeluhuxLþkcez´dfhJtLþkhnuNu.

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or all the

tenders without assigning any reasons thereof.

Seal and Signature of the Bidder Addl. City Engineer

(SouthWest Zone)

AHMEDABAD MUNICIPAL CORPORATION

Invitation for Bid (IFB)

1. The AHMEDABAD MUNICIPAL CORPORATION, (Hereinafter called “the Employer”) invites sealed

Tender document from reputed and qualified bidders for the construction of Works detailed in

the Table below:-

Sr. Name of Works Approximate value Bid Security Completion

No. of works (Rs.) (Rs.) Period

1 Diff AMC Building like ward office, muster Rs.9,998/- 12 months

station, school, building, aganvadi, amc (Excluding

various building, public toilet block & urinal Monsoon)

block repairing and Renovation work in

bopal ghuma in south west zone.(A.R.C) Re

invite Rs.9,99,850.00

2. Tender (a complete set of bidding document) fee shall be Rs. 900/- in the form of Demand Draft /

Pay Order from any Nationalized Bank in favor of MUNICIPAL COMMISSIONER, Ahmedabad,

payable at Ahmedabad, which shall be non refundable. The fees shall be paid at the time of

submitting the tender.

3. Interested bidders shall download the tender documents from website http://amc.nprocure.com

and http://nprocure.com. up to Dt. 03.03.2026 at 16:00hrs tender fee as mentioned in clause

above shall be paid by the bidder at the time of bid submission.

4. All bids must be accompanied by Bid Security of the amount specified for the Works in the above

Table payable at Ahmedabad and drawn in favor of AHMEDABAD MUNICIPAL CORPORATION,

Ahmedabad. Bid Security will have to be in any one of the forms as specified in Clause of ITB

(Instructions to Bidders).

All Bids must be delivered to Assistant Manager "South West Zone, Zonal Office", Late Shree Tushar

Deshmukh Bhavan, Nr. Shelby hospital, Opp. karnavati Club, S.G. highway, Jodhpur, Ahmedabad-

Seal and Signature of the Bidder Addl. City Engineer

(SouthWest Zone)

AHMEDABAD MUNICLPAL CORPORATION

MAHANAGAR SEVA SADAN

SOUTH WEST ZONE

DETAILS OF BANK ACCOUT

1 Contractor's name

3 Telephone/ mobile no.

4 Permanent account no. (PAN

5 Name of the bank

6 Branch name and address

11 Contractor/ supplier's

signature and stamp

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL CONDITION

1. Contractor shall produce the relevant registration certificate of AMC / State Govt /Central Govt.

2. Contractor shall register the work to labour commissioner as per labour act.

3. Contractor shall not sub-let the work without permission of the authority

4. Contractor should have sufficient skilled and unskilled laborers so that he shall start work at different

sites simultaneously. Contractor's having labour force available during festivals shall only apply.

Contractor can not stop the work due to on availably of labour force. In case progress is delayed,

contractor shall be penalized 0.1% of Tender amount per day for work done after time limit,

maximum up to 10% for remaining work.

5. Bitumen rate difference will be paid as per tender conditions, if applicable.

6. Advance payment / machinery advance will not be paid.

7. Payment of running bill will be made as per recent A.M.C. policy in force.

8. No extra payment will be made due to increase of central / state Govt. Taxes. Exluding GST as per As

per circular no 38 Date 21.11.2022of finance department of Ahmedabad Municipal Corporation .

9. If the work is not completed within time limit the penalty will be recovered from immediate bills of

10. If the material i.e. MH cover C.C block etc. supplied from Municipal Corporation store then

contractor shall not claim for any extra rate for non execution of such item, partly/fully.

11. In the specifications, "as directed"/"Approved" shall be taken to mean, "as directed"/approved" by

the Engineer-in-charge.

12. Wherever a reference to any Indian Standard appears in the specifications, it shall be taken to mean

as a reference to the latest edition of the same in force on the date of agreement.

13. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of specific

mention of a particular point or aspect, the provisions on these particular points, or aspects in the

relevant Indian Standards shall be referred to.

14. All measurements and computations, unless otherwise specified, shall be carried out nearest to the

following limits:

(i) Length, width and depth (height)------- 0.01 Meter.

(ii) Areas -----0.01 Sq. Mt.

(iii) Cubic Contents ------0.01 Cu.Mt.

15. The distance, which constitutes lead, shall be determined along the shortest practical route and not

necessarily the route actually taken. The decision of the Engineer-in-charge in this regard shall be

taken as final.

16. Where no lead is specified, it shall mean "all leads"

17. Lift shall be measured from plinth level.

18. Definite particulars covered in the items of work, through not mentioned or elucidated in it,

specifications shall be deemed to be included there in.

19. Reference to specifications of materials as made in the detailed specification of the items of work is

in the form of a designation containing the number of the specification of the material and prefix 'M'

20. Approval to the samples of various materials given by the Engineer-in-charge shall not absolve the

contractor from the responsibility of replacing defective material brought on site or materials used in

the work found defective at a later date.

21. The contract rate of the item of work shall be for the work completed in all respects.

22. No collection of materials shall be made before it is got approved from the Engineer-in-charge.

23. Collection of approved materials shall be done at site of work in a systematic manner. Materials shall

be stone at site of work in a systematic manner. Materials shall be stored in such a manner as to

prevent damage, deterioration or intrusion of foreign matter and to-ensure the preservation of their

quality and fitness for the work.

24. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed from the

site of work within 24 hours.

25. No materials shall be stored prior to, during and after execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

26. All works shall be carried out in workmanlike manners per the best techniques for the particular

27. All tools, templates, machinery and equipment for correct execution of the work as well as for

checking lines, levels, alignment of the works during execution shall be kept in sufficient numbers

and in good working condition on the site of the work.

28. The mode, procedure and manner of execution shall be such that it does not cause damage or over

loading of the various components of the structure during execution or after completion of the

29. All necessary safety measures and precaution (including those laid down in the various relevant

Indian Standards) shall be taken to ensure the safety of men, materials and machinery on the works

as also of the work itself.

30. The testing charges of all materials shall be borne by the Contractor unless recovery at one percent

towards testing charges is separately made.

31. Time limit is to be considered as per given LOI of different approved estimate of workIn failure

complete of work in Specify time limit liquideddamages fordealy close will be applicable .

INSTRUCTION TO TENDERERS

TENDER VALIDITY PERIOD:

The tender shall be kept valid for acceptance for a period of One Hundred Twenty Calendar days

(120) from opening of price bids.

SECURITY DEPOSIT

Within 10 days of receipt of Acceptance from the Corporation, the successful tender shall furnish to

the Corporation Security Deposit of 5% (five percent) of the contract price cheque or Bank

Guarantee, pay order, or demand draft of Nationalized Banks and Schedule Banks only.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be 12Month(excludingmonsoon )after the order to start the works. Progress of work

should be in proportion to time limit.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The contractor

shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He shall be responsible

for any damage to public. If any incident happen, during the execution of work. In case of dispute for unseen or

overlooked items the decision of the Dy. City Engineer shall be final. The contractor shall have to give site clean of

all rubbish during the work and at the time of completion of work and hand over the site with final finishing of

the work as directed. All the rejected materials shall be removed from site within 24 hours by contractor at this

risk and cost. Debris shall have to cart daily from site.

If any extra item crops up during the progress of work the same shall be carried out by the contractor and he shall

be paid at the rate fixed by Add.C.E. as per the rate analysis based on latest SOR or if item is not available in SOR

than based on current market rates. In case of extra item decision of Add. City Engg. shall remain final regarding

If in the interest of the Corporation it is necessary to change either any site or the design of the propose work the

contractor shall carry out the same at his quoted rates without charges any extra and the contractor will have to

carry out the works and he will be paid at the rate quoted by him. No claim for extra rate for subsequent changes

in site and design is entertained.

Octroi exemption passes shall not be given for any materials required for the work. Contractor will be fully

responsible for compliance of the various provisions under contract Act. 1970 and the Rules framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of the tenders for this

work and that the tenderer shall not be allowed to withdraw on modify the offer on his own during the period. If

any tenderer withdraw or makes any modifications or addition in the terms and conditions of his tender not

acceptable to the Municipal Corporation the Municipal Corporation shall without prejudice to any right or

remedy be at liberty to forfeit in full the said earnest money and black list the contractor.

If the work is not carried out within the specified time limit. from the date of order to start the work the penalty

of Rs.-( As per Form - B1) per day of delay shall be recovered from the immediate bills payable to the contractor.

Contractor has to make his own arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of demand draft

iv) Condition of Form - B1 Standard Specification of material & code of practice will be applicable. Form B1 can

be is available in website. Specification shall be as per ' R& B Dept. - Govt. of Gujarat booklets of Building

Works & and Road Works Specifications published by Gujarat Book Depot, Sector-21. Gandhinagar.

CONTRACTOR'S SIGNATURE ADDL.CITY ENGINEER

& STAMP (South West Zone)

SPECIFICATIONS OF MATERIALS – CIVIL

This section gives detail specifications for mainly used materials, for other materials refer Building Specifications.

For materials relevant specification of Building Specification shall apply.

TECHNICAL SPECIFICATIONS

NAME OF THE WORK:- Diff AMC Building like ward office, muster station, school,

building, aganvadi, amc various building, public toilet block & urinal block repairing

and Renovation work in bopal ghuma in south west zone.(A.R.C) Re invite

item no 1. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth consolidation each deposited layer by

ramming and watering.

item no 2. Excavation for foundation up to1.5 m depth including sorting out and stacking of useful

materials and disposing of theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil

(R & B S.O.R 2023-24 I.no. Item Code 04001A)

item no 3. Providing and laying cement concrete1:5:10 (1-Cement: 5- coarses sand

and:10-hand broken stone aggregates 40mm nominal size) and curing complete

excluding cost of formworkin (A) Foundation and Plinth.

item no 4. Providing and laying cement concrete1:4:8 (1-Cement: 4- coarses and:8-hand

broken stone aggregates 40mm nominal size) and curing complete excluding cost

of formworkin (A) Foundation and Plinth

item no 5. Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken

stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

item no 6. Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-crushed

stone aggregates 20mm nominal size) and curing complete including cost of formwork

in (A) wall caps/coping

item no 7. Providing and laying cement concrete work 1:2:4 ((1-Cement:2- coarse sand:4-

graded aggregates 20mm nominal size) curing complete excluding cost of

formwork and reinforcement.

item no 8. Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregates 20 mm nominal size) for reinforced concrete chhajjas not exceeding

10 cm. thickness upto floors two level including finishing the exposed surfaces

with cement mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface

centering and form work and curing complete excluding cost of reinforcement.

item no 9. Providing and laying controlled cement concrete / Ready Mix Concrete of M-200

and curing complete, excluding the cost of form work and reinforcement for

reinforced concrete work in:

item no 10. Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc.

complete including the cost of form work but excluding the cost of reinforsement for R.C.C

work in (iv) Slabs having more than 13 cm and upto 15 cm.thickness

item no 11. Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-coarsesand: 4-

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc.

complete including the cost of form work but excluding the cost of reinforsement for R.C.C

work in (iv) Slabs having more than 8 cm and upto 10 cm.thickness

item no 12. Brick work using common burnt clay building bricks having crushing strength

not less than 35kg./Sq.Cm.in foundation and plinth in Cement Mortar1:6 (1-

Cement :6 - fine sand)

item no 13. Extra Rate for brickwork in Above Item for super structure above plinth level upto

floor two level (B) Conventional

item no 14. Half brick masonry in common brunt clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation

and Plinth conventional brickwork

item no 15. Extra for half brick masonry in super structure above plinth level upto floor two

level (B) conventional

item no 16. Providing form work in ordinary timber planking so as to give a rough finish

including centering, shuttering, strutting and propping etc. height of propping and

centering below supporting floor to celling not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work upto floor four level

item no 17. Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for

Doors windows and clear story windows including anodised alluminium But hinges with

necessary screws and indian teak wood shutters with.

item no 18. Providing and fixing 25 mm thick shutters for cup boards etc. including black

enamelled M.S. butt hinges with necessary screws.(A) Indian teak wood. (i) Fully

item no 19. Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame alround, square or round bars with round

headed bolts and nuts or by screws (A) Plain Grill.

item no 20. Providing and fixing glazed louvered glass windows and ventilators with teak

wood frame 10 cm. x 7 cm. size including 3 coats of oil painting to wood work

item no 21. Providing and fixing glazed louvered glass windows and ventilators with teak

wood frame 10 cm.x7 cm. size including 3 coats of oil painting to wood work

etc.complete.with wooden louvers plank 12mm thick

item no 22. Providing and fixing 35 mm thick shutters for Doors, windows and clere story

windows including Indian teak wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of approved quality and two

coats of oil painting etc, complete.(ii) Fully Glazed.

item no 23. Providing and fixing 35 mm thick shutters for Doors, windows and clere story

windows including Indian teak wood frames 10 cm x 7 cm. size including black enamelled

iron oxidixed fixtures and fastenings including primer coat of approved quality and

two coats of oil painting etc, complete.(ii) Fully Panelled.

item no 24. Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S.tubes of 19 gauge thickness and size of

mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails.M.S. frames hall have a

coat of steel primers of approved make and manufacture, M.S. frames hall be covered

with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm formings tiles,

and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and bottom rail on either side,

and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC sheet

beading on eighter side, and joined together with solventcement adhesive,. An

additional 5 mm thick PVC strip of 20 mm width is to be stculkon the interiors side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per direction

of Engineer incharge, manufacture’s specification and drawing.

item no 25. Providing and fixing in position collapsible steel shutters with vertical channels

x 10 x 2 mm braced with flat iron diagonal 20 x 5 mm size with top and bottom rails T

iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking

arrangements, stoppers, handles, including a priming coat of red lead paint &

item no 26. Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and diagonal

braces of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at Junctions and corners

25 mm dia. pulley, 40x40x6 mm angle and T-iron guide rail at top and

bottom respactively with handles, stoppers and locking agangement etc, including

applying a priming coat of red lead paint.

item no 27. Providing & Fixing in position Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45

mm at (1.37kg/mt) Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing &

installing 5 mm thick approved color Acrylic sheet of standard quality fixed with

glazing chips on upper pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

item no 28. Providing and fixing extruded aluminum window having extruded aluminum Colour r Powder

Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete

item no 29. Providing & Fixing in position Alluminium vents with frame using approved anodised

extruded alluminium section as approved by Engg. In charge.(Jindal alluminium)

units equivalent Approved Rate)Frame section of 63.50 x 38.50 mm. (wt.

0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved color Acrylic sheet of

standard quality etc. comp.

item no 30. Providing and fixing standared extruded of alluminium section of size 63 mmx38.10

mmx1.2 mm (Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

item no 31. Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc complete for Fix Partition

item no 32. Providing and laying 40 mm thick marble chips flooring rubbed and polished (I.E.terrazo)

to granolithic finish with under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse

sand: 4-graded stone aggregate 10 mm and down gauge) and to player 10 mm

thick with white, black or white and blak marble cihps of required sizes from 1 mm to 4 mm

nominal size laid in cement marble powder mix 3:1 (3- Cement:1-Marble powder by

weight) in proportion of 4:7 (4- Cement: 7-marble chips by volume) (C)

Medium Shade pigment with approx 50% white cement and 50% ordinary cement

(In top layer only) (upto 10 ton)

item no 33. Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished to

Granolithic finish to player 6 mm white, black or white and black marble chips of size

from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3-Cement:

1 marble powder by weight) in proportion of 4:7 (4-cement marble powder mix: 7-marble

chips by volume) (B) Light shade pigment with white cement (In top layer only)

item no 34. Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

item no 35. Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and landing laid

on a bed of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and) finishing with flush

pointing in white cement.

item no 36. Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with

Computerised Golden Letters Discription as per instructions of engg. in charge

to M.S. frame structure for Inaugaration & Public Handover Function (N.S.)

item no 37. Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of steps and

landing laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-coarses and)

finishing with flush pointing inwhite cement.

item no 38. Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of steps and dedo

on 10 mm thick cement plaster 1:3 (1- cement: 3-coarse sand) and jointed

with white cement slurry

item no 39. Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and dedo on

10 mm thick cement plaster 1:3 (1-cement:3- coarse sand) and jointed with white

item no 40. Providing and laying 24" x 24" vitrified Tiles 8 to 10 mm th. Double Charged

gloosy/ Matt of Approved make as approved by Adl.C.E. / consultants in flooring over

20 mm thick cement mortar 1:6 (1 cement : 6 coarse sand)on new surface& jointed

with colour cement slurry incl with flush pointing & cleaning the surface etc. comp.

item no 41. Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double Charged Gloosy /

Matt tiles of Approved make as Approved by Adl.C.E. / Consultants for upto 10 cm high

skirting as approved by Engineer in charge over 10 mm thick cement mortar 1:6 (1

cement : 6 coarse sand)on new surface& jointed with colour cement slurry incl with

flush pointing & cleaning the surface etc. comp.

item no 42. Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base

of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 (1-Lime putty:1.5-

coarses and) laid over and jointed with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc. complete. (A) 25 mm thick

item no 43. Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar

1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed

with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

item no 44. Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base

of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid over and jointed

with grey cement slurry including rubbing and polishing etc.complete. (B) 30 mm

item no 45. Providing and laying polished kota stone slab 25 mm thick in risers of steps, skirting Dedo and

pillars laid on 10 mm thick cement mortar 1:3 (1-Cement :3 coarses and) and jointed

with gray cement slury mixed with pigment to match the shade of slab including

rubbing and polishing etc.complete.

item no 46. Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses and:4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (A) 40mm thick.

item no 47. Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse sand:4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a

floating coat of neat cement. (B) 50mm thick.

item no 48. Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using white cement including

rounding off junctions and extending them up to15 cm along the wall, clearing with

water and oxalic acid etc.as directed.

item no 49. Providing and laying coloured glazed tiles of the size 300 mmx200 mmx8

mm/300 mmx450 mmx8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1cement: 3 coarse sand) & jointed with white cement slurry.

item no 50. Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I. J or

L Hooks and nuts 8 mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm

item no 51. Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet class-3

gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc. including

making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet.

item no 52. Providing and fixing five courses water profing treatment with bitumen felt

consisting of second and fourth course of blown/ bitumen or/and residual bitumen

applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre

base bitunen saturated under lay type land third course with fibre base self finished felt type

2 grade 1 and fifth and final course of stone grit 6 mm and down size or pea sizes

gravel spread at 0.008 Cu.Metre/Sq.metre preparation of surface

excluding grading complete.

item no 53. Providing and fixing on wall face C.I. Rain water pipe including filling the joints with spun

yarn soaked in neat cement slurry and cement mortar 1:2(1- Cement : 2-fine sand)

item no 54. Providing 15 mm thick cement plaster in single coat on Rough (Similar) side of single

or half brick walls for interior plastering up to floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

item no 55. Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

item no 56. Colour washing with lime on wall surface (two coats) over and including a primary

coat of white washing to give an even shade after through brooming the surface to

remove all dirt, dust, mortar drops and other foreigh matter.

item no 57. Removing dry or oil bound distemper by a washing and scraping and sand

papering the wall surface smooth including necessary repairs to scratches

item no 58. Distempering with dry distemper of approved brand and manufacture (two coats) and of

required shade on wall surfaces of given an even shade, over and including a

priming coat of whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter.

item no 59. Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar dropping and

other foreign matter and also including preparing the surface even and sand

papered smooth.

item no 60. Extra Coat for Above Item over above for every subsequent coat of approved

brand and manufacture.

item no 61. Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

item no 62. Extra over item for every sub sequent coat of wall painting with plastic emulsion paint of

item no 62. (a) Extra over item for painting with plastic emulsion paint of approved brand on ceilings and

item no 63. Extra over item for painting with plastic emulsion paint of approved brand on ceilings and

item no 64. Painting two coats (excluding priming coat) on new steel and other metal surface

with enamel paint, brushing, interior to give an even shade including cleaning the surface

an even shade including cleaning the surface of all dirt, dust and other foreign matter.

item no 65. Painting one coats (excluding priming coat) on previously painted steel and other metal

surface with enamel paint, brushing to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter.

item no 66. Extra over item for every sub sequent coat of paint.

item no 67. Painting two coats (excluding priming coat) on new steel and other metal surface

with synthetic enamel paint, brushing to give an even shade including cleaning the

surfaceofalldirt,dust and other foreign matter.

item no 68. Painting one coats (excluding priming coat) on previously printed steel and other metal

surface with synthetic enamel paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

item no 69. Extra over Above item for every sub sequent coat of paint.

item no 70. Painting two coats (excluding priming coat) on external surface of new rain water,

soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all dirt, dustand other foreign

matter.(75 mm dia)

item no 71. Painting two coats (excluding priming coat) on external surface of new rain water,

soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all dirt, dust and other foreign

matter.(100 mm dia)

item no 72. Painting two coats (excluding priming coat) on new wood and wood based surface

with enamel paint, interior to give an even shade including cleaning the surface

of all dirt, dust and other foreign matter sand papering and stopping. (a) Ready mixed

paint brushing wood primier pink.

item no 73. Painting one coats (excluding priming coat) on previously painted wood and wood

based surface with enamel paint, to give an even shade including cleaning the of all dirt,

dust and other foreign matter.(b) Ready mixed paintbrushing priming for enamel

item no 74. Extra over Above item for every sub sequent coat of paint.

item no 75. Painting two coats (excluding priming coat) on new wood and wood based surface

with ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade including

cleaning of all dust, dirt and other foreign matters and papering and stopping.

item no 76. Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials.etc complete

item no 77. Applying two coats of Birla (white cement based) or Asian (acryliclapy-putty) or

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

item no 78. Painting one coats (excluding priming coat) on previously painted wood and wood based

surface with enamel paint, to give an even shade including

cleaning the of all dirt, dust and other foreign matter.

item no 79. Writing letter or figures on any surface with black japan paint (stops, comas,

hyphens and the like not to be measured and paid for separately) (i) Block

(Letters/Figures) (Per 10 Letter pet CM.HT)

item no 80. Demolition including stacking of serviceable materilas and disposal of unserviceable

materials with all lead and lift. (i) R.C.C. work

item no 81. Demolition of Brick work and stone masonry including stacking of serviceable materil as

and disposalof unserviceable materials with all lead and lift.(ii) In Cement Mortar.

item no 82. Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materil as

and disposal of unserviceable materials with all lead and lift.

item no 83. Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materil as and disposal of unserviceable materials with all lead and

lift.(i) G.I.sheet roofing.

item no 84. Dismentling steel work including distempering and stacking the materials with all

item no 85. Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and other attachment etc. complete and stacking

the material within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

item no 86. Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves,hold fasts and other attachment etc. complete and stacking

the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

item no 87. Dismentling barbed wire in fencing including making rolls and also including dismentling

fencing posts including all earth work concrete in base and making good the

disturbed ground stacking useful materials as directed and disposing as

directed and disposing of the unserviceable materials with all lead and lift.

item no 88. Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings and

clamps including stacking the materials with all lead and lift (for any dia, of pipe)

item no 89. Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an type,

flushing tank etc. including stacking the materials with all lead and lift

item no 90. Scraping oil paint from steel and other metal surface and making the surface even

(with Hand Scraping.)

item no 91. Removing and scraping of old deteriorated plaster of any thickness from

wall / R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

item no 92. Providing and fixing M.S. fan clamps of shape and size as specified in existing

R.C.C. slab including cutting chase and making good.

item no 93. Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with

cement and sand slurry 1:3 (1-cement 3-sand )

item no 94. Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a

hot mixture of bitumen and clean dry sand (1:1 by weight)

item no 95. Providing & Fixing in position Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg.in charge(Jindal

alluminium)(a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical &

top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at 100x44.3 wt.(1.37 kg/mt)

incl.providing & installing 5 mm thick approved color Acrylic sheet of standard

quality fixed with glazing chips on upper pannel & Laminated sheet on lower pannel

(wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

item no 96. Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully Glazed

Alluminium doors with frame using approved quality anodised extruded

alluminium section as approved by Engg. In charge.(Jindal alluminium )(a) Frame sections

101.6x44.45 mm b) Shutter vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)(

at 1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt ) Shutter

middle section at 100x44.3 wt. (1.37 kg/mt ) incl. providing & installing 5 mm thick Glass

of standaed quality fixed / 12 mm thick Laminated sheet with glazing chips (wt.

kg/ Rmt) in panels etc. comp. as per Detail Given & direction of engg.in charge.

item no 97. Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix type

with frame using approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent. including P/F

installing 5 mm thick clear/tinted Glass of standard quality etc.comp.

item no 98. Providing & Fixing in position Alluminium vents with frame using approved anodised

extruded alluminium section as approved by Engg. In charge.(Jindal alluminium)

units equivalent Frame section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing

& Installing 5 mm thick Glass of standard quality etc. comp.

item no 99. Providing and fixing of Ridge flashing for roof panel shall be made out of

mm thick pre coated GI sheet. The Pre coatedsheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PP GI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches during transportation. The ridge shall be

fixed to the steel members by poprivetor self drilling/self stitching fastners @

maximum 450mm c/c along length of capping/flashing etc complete .

item no 100. Supplying and fixing vinyl flooring over the surface having 1-2 mm thickness as per

directed by engineer incharge etc as completed (N.S.)

item no 101. Providing and laying 15mm bamboza wooden flooring as per architect's drawing

with all necessary details as directed by the project consultants. Use underlay

for better result as per Detail specifications and directed by the project consultants. (N.S.)

Approved Rate )

item no 102. Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts

mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c. with five

Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg.

per 100 Metre, strained and fixed to posts with G.I, staples including fixing the posts

in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

item no 103. Renovation and Repairing work in Chainlink fencing any size and also refixing work

incl. febrication work with all materails to be painted one coat of primer and

twocoats of paint as directed inline and level. (N.S.)

item no 104. Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry in

C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster to

masonry / in C.M.1:3) and cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe

item no 105. Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B. Masonry

walls 23 cm. thick in C.M. (1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick

slab with marble chips set in C.M. (1:6) (6 mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

item no 106. Extra rate for using Ready Mix Concrete of any grade for below ground level to

vertical upto any floor with delivery & suction Pipe & Pump etc. The rate includes fule,

pump operator, skilled labor, driver etc completed and as per direction of engineer in charge

item no 107. P/A Tremix with dewartering machine and floater machine on constructed CC work

for finishing the surface as per requirement. The rate including all machinaries, labor,

loading, unloading, transportaion etc complete as per direction given by engineer

item no 108. Carrying out timber treatment to all wood work including drilling holes and spraying oil based

chemical solution on surface of timber work for termite control including labor and material

etc. complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by

mass) is recommended one litre chemical emulsion diluted with 19 liters of kerosene. Total

diluted concentration will be 20 liters inclusive of 1 liter chemical emulsion application in drilled

holes and 0.75 / Litre chemical per one Sqmt two coat on wood surface not protected by paint

item no 109. Applying general insecticide pest control treatment to floors, cupboards etc including labour

materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

item no 110. Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consist ment with

I.S. specification. Using Chlordene and Chior purfiles 20 EC. As Per

6131_paret-II Consentration Weight on percentis recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1% concrentration inclusive of one litre

chemical emulsion appication attherate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

item no 111. Carrying out wall treatment for termite control including spraying with chemical solution in oil

base including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.S

item no 112. Providing erecting and fixing double coated Syntex or equivalent PVC.(ISI) water

tank of required capacity each with all necessary fittings and connection etc.

complete on terrace.

item no 113. Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube fitting and clamps including making good the

wall ceiling and floor.

item no 114. Providing and laying in trenches galvanised mild steel tubes (Midium grade) of

the following nominal bore, and tube fitting (Earth work in trenches to be

measured and paid for separately)

item no 115. Making connection of galvanised Mild steel distribution branch with galvanised mild steel

main 50 mm to 80 mm nominal bore by providing and fixing tee including cutting

and threading the pipes complete.

item no 116. Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure poluthene

pipes of the following out side Dia. Low densidy, complete with special falnge

compression type fittings,wall clips etc.including making good the wall ceiling and

item no 117. Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure polythene

pipes of the following out side Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including making good the wall ceiling and

item no 118. Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter

of self cleaning design with C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100 mm inlet and 50 mm outlet.(C)100mm dia.

item no 119. Providing and fixing water closet squatting Pan (Indian type W.C.Pan) size

mm (Earth work, bed concrete, foot rest and trap to be measured and paid for

separately) (A) Vitreous China. (I)Long pattern = White colour

item no 120. Provdg. & fixing wall mounted White / Color Vitreous China European water

closet with integral P trap of "Cera" - Clair Series or equivalent incl. seat cover

Chair Bracket etc. complete as per direction of engg. In charge.(N.S.)

item no 121. Providing and fixing wsh down water closet (Europe an type, W.C.Pan) with integral

P or S trap including jointing the trap with soil pipe in Cement Mortar1:1 (1-

Cement:1-fine sand) (Seal and cover to be measured and paid forseparately) (A)

vitreous China Pattern :(i) in white colour

item no 122. Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " Hindware" incl. C.P.

Brass waste coupline , waste pipe, pvcconnection etc. Complete.( size

item no 123. Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent standard

make as approved by engg. in charge all complete. (N.S.)

item no 124. Providing and fixing 100 mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-

Fine sand)(A) Vitreous China.

item no 125. Providing and fixing wash basin with single hole for pillar tap with C.I.or M.S. brackets

painted white including sutting holes and making good the same but excluding fittings.

(A) Vitreous China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white colour.

item no 126. Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

cutting holes in walls and making good the same but excluding fittings. © Vitreous

China Sink. (i) 600 mm x 450 mmx 150 mm size

item no 127. Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass

mounted on 6 mm thick A.C. sheet or ply wood sheet and fixing to wooden pluge with

C.P. brass screws and washers.

item no 128. Providing and fixing chromium plated brass halftrun flush cock of approved quality including

fixing in pipe line etc. complete.

item no 129. Provdg. & fixing White / Color Vitreous china Counter wash basin with signle hole for

pillar tap of "Cera " - Concord series of 550 x425 mm size to be fiited in stone counter

with necessary brackets painted white incl. cutting holes and making good the same

.Cost Includes P/F C.P. brass waste coupline, 32 mm dia fisher union ,15 mm dia.

Pillar cock & Angle cock of " Ess Ess"- Trend series ,32 mm dia. Waste pipe etc.

complete as per dir. of engg. in charge.

item no 130. Providing and fixing washbasin with single holefor pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making goodthe same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In white colour.

item no 131. Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or Equivalent Make

for Kitchen Platform of size : 24":x18" as per Direction of engg. In charge

item no 132. Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

item no 133. Providing and fixing 600 mmx120 mm glass shelf with C.P. brass bracket and guard

rail complete mixed to wooden plug with C.P.brass screws.

item no 134. Providing and fixing toilet paper holder. (A) C.P.Brass

item no 135. Providing and fixing screw down bib taps of following size. (A) Brass screw down bib

tap polished bright.

item no 136. Providing and fixing screw down bib taps of following size. (B) Brass chromium plated

screws down Bib Tap.

item no 137. Providing and fixing screw down bib taps of following size. © Gun metal screw down bib

item no 138. Providing and fixing pillar tap, capstan head, screw down high pressure with screws,

shanks and back nuts.

item no 139. Providing and fixing Gun metal check or non-return fullway wheel valve.

item no 140. Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete.

item no 141. Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe , tap etc.complete. (A) White earthen ware flat back or corner

type size 430mm x 260mm x 350mm.

item no 142. Providing and fixing Urinal of approved quality including connection with

trap and with integral longitudinal flush pipe. (A) Squating plate pattern white

earthen ware 550mm x 300mm.

item no 143. Providing and fixing chromium plated, bottle trap with necessary couplings of

approved quality for wash basin.

item no 144. Providing and fixing ball cock ofapproved quality as directed. (A) Copper Metal (i) 25mm

item no 145. Providing and fixing ball cock of approved quality as directed. (B)Abonite (i) 25mm dia.

item no 146. Filling with good Quality thor as and where directed by the Architect / Engineer-

in-charge, in sunk in layers of 15 cm. thickness, including watering, ramming well etc.

complete, as directed by the Architect / Engineer-in-charge .

item no 147. Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-40) for

cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with solvent, including cost of all materials.adhesive

item no 148. Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-40) for

cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

item no 149. Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-40) for

cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.