Renovation work of Canteen of ITDA Soochan Prodhyogiki Bhawan IT Park Sahastradhara Road Dehradun

Amount

Providing and fixing 12.5 mm gypsum board false ceiling as per design direction of Engineer in charge.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, P.C.C grade M 10, Nominal mix 1:3:6

Providing and installing 6mm toughened glass partition with M.S. frame with paint finish upto ceiling with 2 doors 12 mm toughened glass with all material required as per design and direction of Engineer in charge.

Providing and installing 6mm toughened glass partition with M.S. frame with paint finish upto 8' height with sliding door for cabin as per design and direction of Engineer in charge.

Repair work of existing glass partition with silicone pasting and framing where required as per direction of Engineer in charge.

Providing and fixing 12.5 mm thick gypsum board on wall with MS framing of approved make, as per design and direction of Engineer in charge.

Providing and installing cement board 12 mm partition with M.S. framing 2'x4' upto 10' with 1 nos. of flush door of approved make as per design and as per direction of Engineer in charge.

Providing and installing M.S. Partition both side of shed with 25x25x3.2mm M.S rectangular Tube at the 5 cm to 7.5 cm spacing vertically as per design and as per direction of Engineer in charge.

Providing and installing kitchen shelf with M.S. pipe and pine wood top as per design and as per direction of Engineer in charge.

Electrical work Electrical work wiring and switchboard( Power point/ Light point/Fan Point etc) as per design and direction of Engineer in charge for all cove lights, conclead lights, wall bracket light, ceiling fan, table fan, hanging lights, wall brackets, charging point and kitchen requirements wiring fittings, wiring, cabling DB, MCB, MCCB, Isolator, Main Switch etc as required .

Providing and installing hanging lights with 4W Tulip LED filament bulb Wire length : 1m (approx.) Relative humidity up to 80%.CCT : 1800K. 8W/mtr LED striplight, 120led/m , 3000K CCT, with surface aluminium profile with milky white diffuser, Dimension : 17*15mm, Input Voltage : DC 12V, Beam Angle : 120°, CRI ( Ra) : >80, 3000K CCT , IP20 , 2 year Warranty. ( Make- Polycab/Havells/Leksa

Providing and installing Wall Bracket with 6W Acrylic body cum diffuser with rose gold mounting arrangement It has an inbuilt driver LED efficacy > 100 lm/W System efficacy (5000K) ≥ 40lm/W CRI ≥80 LED life : 25000 burning hours Surge protection up to 1.5kV IP20 3in 1 with 2 years warranty. ( Make- Polycab/Havells/Leksa)

Providing and installing Concealed lights 12W LED Recessed tiltable flower pot COB downlight, White reflector , White body, 3000/4000/6500K CCT, LED efficacy : > 100 lm/W, It has external LED driver, CRI≥70, LED life : 25000 burning hours, Cut out dimension ø70mm,IP20. with 2 Years warranty( Make- Polycab/Havells/Leksa)

Providing and installing Cove lights 8W/mtr LED , 120led/m , 3000K CCT, with surface aluminium profile with milky white diffuser, Dimension : 17*15mm, Input Voltage : DC 12V, Beam Angle : 120°, CRI ( Ra) : >80, 3000K CCT , IP20 , 2 year Warranty. including cost of Driver.( Make- Polycab/Havells/Leksa)

Plumbing Work Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board Size510x1040 mm bowl depth 250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mmhigh and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Supply and fitting of G.I water supply line of 15 mm dia for sink and wash basin including cost of all labour, material, t&p.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 17.7A (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and installing water taps for sink (make essco) as per design and as per direction of Engineer in charge.

Providing and installing pergola made with M.S. pipe 4"X4" base pipe and 2"X4" pipe (Size - 8'X14'x10') as per design and as per direction of Engineer in charge.

Landscaping Providing and making planters with plant and brick masonry in cement mortar plaster finish both sides 1:3 ratio as per design and as per direction of Engineer in charge.

Repair and adding members for existing planter frame with 1"X1" M.S. pipe and paint finish 2 coat of primer and 2 coat of paint as per design and as per direction of Engineer in charge.

Providing and installing planters (size - 8"X8"X8") for M.S. Frame as per design and as per direction of Engineer in charge.

Providing and installing tree shaped planters frame upto 5' height with 8 nos. Of planters each (size 10''height) as per design and as per direction of Engineer in charge.

Providing and installing hanging planters with plants as per design (size- 9" height)

Providing and Planting Creepers upto 5' length as per design and as per direction of Engineer in charge.

Snake plants upto 2' height as per design and as per direction of Engineer in charge.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Providing and placing planters with plants (banana palm upto 4' height) planter up to 1'-6" height as per design and as per direction of Engineer in charge.

Providing and placing furniture as per design and as per direction of Engineer in Charge. Bar Stools 28" to 36" height leather finish cushioned seating and backrest as per design and as per direction of Engineer in charge

Table for bar stool (size - 2'X10'6") with stone top and MS Standas per design and as per direction of Engineer in charge.

Table for bar stool (size - 2'X5'6") with stone top and MS Stand as per design and as per direction of Engineer in charge.

Table for bar stool (size - 2'X8'6") with stone top as and MS Stand per design and as per direction of Engineer in charge.

Chairs teak wood with leather finish cushioned seating and back rest ) standard size as per design and as per direction of Engineer in charge.

Table (size - 2'x4') with stone top and MS Stand as per design and as per direction of Engineer in charge.

Table (size - 2'x2'-3'') with stone top and MS Stand as per design and as per direction of Engineer in charge.

Sofa 2 seater leatherate finish as per design and as per direction of Engineer in charge.

Sofa table ( size - 2'X4') as per design drawing and as per direction of Engineer in charge.

Providing and installing kitchen counter in MS frame and 9mm ply garjen face with laminate pasting with stone top (Size 2' Width and Height 4') as per design and drawing and as per direction of Engineer in charge.

Providing and installing kitchen counter stone top jetblack with stone top as per design and drawing and as per direction of Engineer in charge.

Repair work of existing water fountain including all t&p and material as required.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Beautification Work Providing and fixing at site of Hand made creative Three dimensional sculptures with RCC Foundations as per direction of site Engineers. Design - Abstract/ Figurative Material -Electronic scrape Size- Medium to Large Height in range 5 ft to 8ft width as per design. 2- Flower abstract sculpture from scrape available. 3-Arrangement and designing of counter table with scrape available.

AVDESH KUMAR AGARWAL (BID ID -398993)

M/S DINESH PRASAD UNIYAL (BID ID -399088)

Sanjay Varma Construction and Supplier (BID ID -398967)

M/s B.R. Construction Co. (BID ID -399125)

SHRI R K INFRA (BID ID -399101)

AGGARWAL TRADERS (BID ID -399002)

J K Ghai (BID ID -399111)