Renovation of Boyanika Showroom at Udit Nagar Rourkela

Amount

CIVIL WORKS

Dismantling and removing old racks,counters & partition wall etc including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead including loading and unloading as required as per site condition etc. complete as per specification and as directed by Engineer-in-Charge

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete and as per direction of Engineer-in-charge.

Fixing Vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Supplying & fixing of Granaite slab (lakhared)over a levelling 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Supplying, fitting and fixing of M.S. Rolling shutter including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

25mm grading in C.C (1:2:2) using 4.7 mm size hbg cleaned bajri (Down graded chips) mixed with water proof compound including cost conveyance royality etc complete as per direction of EIC

Repairing of Collapsible gate with requirment materials as per direction of Engineer in Charge.

INTERIOR WORKS :

DisplayRacks Providing and fixing display racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam/Hidesign) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate and 12mm glass shelves of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Display Cum sales Counter Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, 12mm glass table top, side glass and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 0.8mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Reception and cash Counter Table Providing and fixing in proper position, curved shape reception table of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Display Boxes :

Providing and lfixing in proper position, display boxes, made of 12mm glass as per approved design for display and hanging of hndloom items with cost of all labour & materials with manqueen complete as per direction of Engineer in-charge

Chairs/Stools :

Customers stools/chair of any reputed make complete as per direction of Engineer in-charge

Excutive Chair for Cash Counter of any reputed makecomplete as per direction of Engineer in-charge

GYPSUM FALSE CEILLING:

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

CLEAR GLASS FIXED PARTITION/ GLASS DOOR Providing and fixing of 12mm toughened glass fixed partition/door fixed to the floor ceiling and wall by patch fittings/Wall connecting profile base rail with fixing holes incl. clamping parts with screws and gasket for 12 mm glass with cover profile on both sides. This is also inclusive of providing pattern with stickers, sealant, lock etc. as per the detail design and specifications direction of Engineer in-charge.

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/vinear/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge.

High pressure laminate with alluminum frame work covering with 3mm exterior grade of approved make finished in all respect with cost of all materials, labour, scafolding etc complete as per direction of Engineer in-charge.

Erection of a MS fabrication work for extension of verandah finished with handloom motives as approved design as directed by Engineer-in-charge.

Supply fitting fixing of digital sign board of approved design and lighting system with all cost of material and labour etc. to be provided on the front and back side facet to match the elevation of the building in position as per direction of Engineer in Charge.

Supply & fixing of Manqueen of approved design and lighting system with all cost of material as per direction of Engineer in Charge.

ELECTRICAL WORKS.

Supply of all required materials and recessed(concealed) wiring to proposed light points/fan/exhaust fan/call bell points with 2(1x1.5sqm.) PVC insulated 1000v grade FRLS copper were run inside 19 mm PVC conduit pipe of 14 SWG or flexible conduit pipe laid on surface concealed in wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS copper were as earth continuity conductor fixing of 6A-240V modular type switch and complete in all respect including with use of clip-in- type modular plates, boxed, switches, ceiling roses, junction boxes with Bakelite cover as specified and making good to the damages caused and complete as per direction of EIC.

Primary light points :

Secondary light points

Supply of all required materials & recessed wiring to 2/3 pin clip-in modular type 5 Amp plug socket points with 2(1x2.5 sqm)PVC insulated 1100 V grade stranded single core FRLS copper wire run inside 19mm PVC conduict (14SWG) pipe laid concealed in surface wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS Copper wire as earth conti8nuity conductor and complete in all respect including 5 pin 5A sockets switches, plates, boxes and cover as specified and making good to the damages caused and complete with all respect as per the direction of Engineer in charge.

Separator

Supply of required materials & recessed wiring to clip-in modular type 5pin 16/6 Amp plug socket with 16 A SP switch on surface of wall including the modular boxes switches with indicator plates, screws and complete in all respect including making good to the damages caused and as per direction EIC.

Supply of all required materials and recessed wiring to circuit/sub-mains with following number & sizes of PVC insulated FRLS 1100v. grade standard copper wire run inside 19mm PVC conduct(14SWG) pipe laid on surface of wall/ceiling and copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and as per the direction of EIC.

Recessed wiring with 2(1x1.5sqm)+1x(1x1.5sqm)copper wire for looping purpose and for AC IDU.

Recessed wring with 2(1x2.5sqm)+1x(1x1.5sqm) copper wire from LDB to SB, and computer point.

Recessed wiring with 2(1x4sqm)+1x(1x2.5sqm) copper wire from LDB to individual 16 Amp socket.

PANNEL & DISTRIBUTION BOARD.

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of 2 mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for dusting, primered and painted with 2 coats of powder coating of approved shade dust, damp & vermin proof. Having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally having provision for cable conduit entry earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of EIC.

Floor Distribution Board(Main) (As per site condition), Branch Distribution Board, 4 way TPNDB (Double Door), Incoming (40 Amp TPN RCBO – 1 No.

Outgoing – 16/32 A SP MCB – 12 Nos.

3 Phase eletrical connection with all require materials.

Supply, delivery, installation, testing and commissioning of the following fittings/fixture complete with all required accessories and lamps on wall/ceiling as per the direction of EIC.

36/18 watt LED of approved make (Jaguar/Philips

30 watt Track Light

Supply fitting of wall mounting speed fans of approved make.

Supply,Installation,Testing , Commissioning of 2 ton Capacity Cassate AC of approved make with all required fittings complete

Providing & Fixing of 2 KVA Invert of any reputed make like USHA/Microtek etc.Including 2 nos Exide Make Battery of required capacity and its accessories.

Providing & Fixing of 2 KVA Voltage Stabilizer of any reputed make according to requirment of the site.

Samsung LED Monitor 24”

Fire Extinguishers

Provision for fire extinguishers of approved make to be placed in required position as directed by Fire Authority / Engineer in-charge.

Music System

Providing music system to the showroom including fixing of speakers etc

Odinix High Quality 6 watts 103mm dia Ceiling speakers

Ahuja 160 watts Amplifier with Remote and USB Port

Volume Control 6 watt

System installation, testing and commissioning charges

Rabinarayan Das, Proprietor of Nilachakra Enterprises

PARIKSHITA BARIK