Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹48.5 L+₹7.1 L (17.1%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹49.2 L+₹7.7 L (18.7%)Rejected-Finance 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR 342010
COMPREHENSIVE REPAIR AND MAINTENANCE FOR ATTENDING DAY TO DAY COMPLAINTS IN MH, 12 CDU, MDC, HQ CEJZ, JOI AND SHO UNDER GE (ARMY) NO.2 JODHPUR
2023_MES_603760_1
82324/42/E8
Open Tender
Civil Works
Item Rate
330 days
JODHPUR
AS PER NIT CONDITIONS
8 documents required · 8 mandatory
₹500
GE (ARMY) NO. 02
₹1 L
Yes
12 Sept 2023
16 Jun 2023
1 Sept 2023
16 Jun 2023
26 Aug 2023
12 Aug 2023
17 Jun 2023 - 13 Jul 2023
Amount
Notes- Applicable for all items:- (a) Establishment of complaint cell:- (i) Complaints cells will be established at residential/RWAs/Colony and OTM Accommodation (As per locations given by Engineer-in Charge/GE). The numbers of complaints cells in the ibid contract will be one only. (ii) Contractors will deploy manpower/tradesman with requisite tool & plant for smooth functioning of all complaint cells under subject work. The details per complaint cell is as given below :- (aa) Data Entry Operator - 01 per complaint cell. (ab) Attendant - 01 per complaint cell. (ac) Supervisor - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in charge. (ad) Tradesmen & Helpers - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in-Charge and will be present in all complaints cells. The numbers of the tradesman shall be adequate to address all the complaints on daily basis. (ae) The Data Entry Operators, Attendants and Supervisors will be deployed from 9AM to 5 PM on all complaint cells to manage the complaints cell.
Notes- Applicable for all items:- (a) Establishment of complaint cell (Contd):- (iii) The contractor will provide compatible computer system, printers, peripheral, consumables, internet connection/Dongle for each complaint cell alongwith requisite furniture for functioning of complaint cell and storage of store as required. (iv) The complaints in the cell will be received through complaint register / site orders book / Verbally / Telephonically / WhatsApp / Mobile / ARMAAN or any other mode/system as evolved and intimated by JE/Engr-in-Charge. The contractor shall take immediate action to register and attend all the complaints. (v) The complaints will be addressed through complaint slips and contractors will prepare abstract of all the complaints received and action taken thereof on daily basis and will submit to JE/Engr-in-Charge. (vi) Feedback :- Complaint slip will be having a feedback system from user which will be obtained for each complaint and will be compiled daily and submitted by contractors to JE/Engr-in-Charge.
Notes- Applicable for all items:- (vii) Dress Code:- (aa) Deployed manpower/tradesmen to attend and resolve the complaint shall wear proper uniform. Dress code for plumber, carpenter, scavenger and Electrician etc. shall be approved by Engr-in-Charge with monogram/badges which shall be fixed on the dress. (ab) The number of workers shall be increased based upon number of complaints and quantum of work involved during working hours as decided by JE/Engr-in-Charge.
Notes- Applicable for all items:- (viii) T&P :- (aa) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (ab) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge. (ac) The responsibility of taking the tradesmen to complaint site will be of contractor. (ix) Sign Boards :- For each complaint cell, adequate flex sign board of approved size will be placed in complaint cell by contractor. The content of the flex board will be approved by Engr-in-Charge/GE.
Notes- Applicable for all items:- (b) Penalty Clause Contractors will pay penalty on account of non addressal of complaints in given time frame and quality of feedback as per matrix given below. The penalty will be levied by Engr-in-Charge/GE after ascertaining the quality feedback given by user and time taken to address the complaints and justifiable delay, if any. The penalty matrix is as given below :- PENALTY Time delay Satisfactory Partially satisfied Not satisfied Less than 24 hrs Nil Rs.100 Rs.200 24 hrs to 48 hrs Rs. 200 Rs.300 Rs.400 48 hrs to 72 hrs Rs. 400 Rs.500 Rs.600 72 hrs and more Rs. 600 Rs.700 Rs.800 c) Management of urgent nature of complaints such as leakage, water over flow, sewage, Airlock leakage, No electricity on holiday and after 5 PM till 9 AM everyday will also be the responsibility of contractor. For the same adequate tradesman and helper of lack type etc will be made available in each complaint cell by the contractor. (d) All above aspects shall deemed to have been included in the quoted price by the contractor. (e) Recovery on non wearing of uniform :- The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day. (f) The quoted rates shall be deemed to be included of all provisions mentioned above. The decision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter.
Notes- Applicable for all items:- (g) Cost of T&P (Incl Ladders) , misc sundry materials , Labours , dresses for labours ,& other safety gears as required shall be deemed to be included in the quoted rates by the contractor for the respective items. (h) The adequet no of workers as required per day to address the day to day maintenance works shall be deployed by contractor. (a) Highly Skilled Plumber/Pipe Fitter (b) Highly Skilled Carpenter (c) Mazdoor/Helper for Pipe Fitter & Carp - (d) Highly Skilled Mason with one Helper - (As & when required) (e) Highly Skilled Welder with one Helper - (As & when required) (f) Highly Skilled Electrician (g) sewer man
Demolition of cement concrete (un-reinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.
Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specified.
M&L for Vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set (size , shape, colour & shade as approved by GE) and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
All as per item No. 3.00 here-in-above but as in verticle surfaes i.e., skirting , dados, & like similar type work , over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
All as per item No. 3.00 here-in-above but area of each tile exceeding 0.42sqm but not exceeding 1.00sqm
All as per item No. 4.00 here-in-above but area of each tile exceeding 0.42sqm but not exceeding 1.00sqm
M&L for non skid ceramic tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, (size , shape, colour & shade as approved by GE) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
All as per item No. 7.00 here-in-above but as in verticle surfaes i.e., skirting , dados, & like similar type work , over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
All as per item No. 7.00 here-in-above but area of each tile exceeding 0.06sqm but not exceeding 0.11sqm
M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick (size , shape, colour & shade as approved by GE), as in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.
M&L for 16 -18mm thick machine cut pre-polished telephone black granite (size , shape, colour & shade as approved by GE) (colour as approved), (table rubbed and polished) as in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
M&L for 15-16 mm thick mirror polished machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
M&L for 50 mm thick, cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified and as directed.
Providing and laying 60mm thick factory made table vibratory, PU mould, chamfered edge cement concrete coloured paver block of M-35 grade with approved design & pattern as in footpath, drive ways or parking etc; over and including 50mm thick compacted bed of fine sand and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as required, complete all as specified and as directed.
Providing and laying factory made kerbs stone any size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, embedded in position including all necessary excavation, tamping ground around blocks and removal of rubbish/ surplus soil etc; making joints with or without grooves, drainage opening wherever required complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified and as directed.
Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.
M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
All as per item No 20 above but, except stone complete all as specified and as directed.
Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.
Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed
M&L for rendering 15 mm thick in CM 1:6 on stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.
M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.
M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.
S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to Fe- 290 (Gde-E- 165) complete all as specified and directed.
S&F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed.
Dismantling boarding of any description fixed in any position with nails, complete all as specified and as directed.
S&F in repair 5 mm thick solid PVC Wall Lining consisting of Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)
S&F in repair 5-7mm thick PVC hollow false ceiling interlocking type 5-7mm thick plain/ coloured, fitted with MS hollow grid (light weight) section 25mmx25mmx1mm thick including fillets on joints, with hanging arrangements and including maintain levels with adjustable clips, complete all as specified complete all as specified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)
S&F in repair Gypsum board 6-8mm thick in ceilling fixed with screw as per manufacturer's instructions, plain/ colour fixed with steel snap grid (powder coated bottom side) with 'T' and 'L' (25mmx30mmx1.00mm thick) section of size 600mm x 600mm placed in ceiling 'L' section fixed to wall with PVC rawal plugs and steel screws @ 600mm centre to center, including provided 5.0 mm dia galvanised bars/ wire suspended @ 1.80 mtr centre to center both sides proper hanging arrangements and maintain levels with adjustable clips, complete all as specified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing).
S&F in repairs plastic/ nylon anti bird net any colour (as approved) of 1mm to 2mm thick filament and mesh size 25mmx25 mm, allow easy flow of wind, UV stabilized & water resistant, design of mesh diamond/ square type, easy to clean, including wire rope using (nylon/SS wire) with hooks, fixed on wall or roof as directed including all necessary arrangements as required on site complete all as pecified and as directed by engineer in charge.
M&L for preparing new plastered or unplastered surfaces and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces and applying with cement base putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of cement base paint over and including one coat ofalkali resistant primer on walls complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.
Attending complaints of leakage / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as directed and specified. Note: Major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective item.
Attending complaints of leakage / unserviceable low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as directed and specified.
Attending complaints of internal water supply pipes,fittings and bottle traps for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: New GI pipes replaced if any shall be measured and paid under respective item of this schedule as S&F. This item includes for labour part only for removal of blockages of air lock etc.
Hacking out old broken glass (any thickness, size, quality or scription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as directed.
S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified.
All as per item No.43.00 here-in-above,but 4.8mm thick sheet glass
All as per item No.43.00 here-in-above,but sheet glassis frosted
Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Including taking down of old unserviceable wire cloth complete all as specified and as directed.
Repair to steel vents/ Doors/ mild steel chowkats or frames/ grills / window & door shutters by replacing unserviceable hinges , handles , peg stay etc by way of welding etc as required , oiling to hinges, setting right and easing of shutters to function properly and painting at welded portion to match the existing surfaces all as specified and directed.
Welding in repairs exc 2.5cm but n.exc 5cm in length and metal thickness exc. 6mm but n.exc 9mm of any description and in any position complete all as specified and directed. Note: Supply only hinges etc., shall be measured and paid for separately under respective item.
Resecuring/ re-fixing of wooden / PVC shutters of any description and size not exceeding 2.00 Sqm each including taking down (if reqd), easing and adjusting and refixing where ever required and fixing new steel screws complete all as directed and as specified.
S&F in repair prelaminated particle board interior grade 18/19 mm thick prelaminated one sides with decorative choice lamination and other side balancing white lamination, as in kitchen cup boards, CB Shutters,, Shelves, partitions, any type of built-in-furniture etc. fixed with screws to timber frame work or with wooden gutties or with PVC Rawl plugs, complete all as specified and as directed.
All as per item No. 51.00 here-in-above, but both side with decorative choice laminations.
S&F in repair block board 18/19mm thick grade 2 quality, interier grade, commercial type, fixed with screws to timber frame work, complete all as specified and as directed.
M&L second class hard wood timber framed work ie; plain fillets square, rectangular or triangular in section, wrought, bullnosed, rounded or chamferred on one edge or face complete fixed in repairs complete all as specified and as directed.
S&F in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.
S&F in repair Harrison rails of 20mm dia pipe, mild steel, chromium plated with fixing brackets, stops, rollers etc. Incl one pair of Finale/ End Cups (All as per Sample) as in curtain rods complete all as specified and directed.
S&F for stainless steel flexible curtain track/rail and brackets white or coloured with heavy wall/ceiling support including runner, end cap, ceiling mounting bracket, roller, clips, screw, pvc enchors, fastner bolts-nuts all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.
S&F continuous (Piano) hinges width of flap 40 mm (when open) , mild steel, bright finish or electro galvanised fixed in repair.
S&F in repair mild steel 150 mm ordinary rat tail/ Helicle door springs including roller and roller plate steel chowkhats a with necessary flat iron cleat by welding or drilling with necessary nut, bolts etc complete all as specified and directed.
S&F in repair 150-200mm long Double action spring hinges, mild steel with steel wire spring, stove enamelled, black mild steel single action helical hinges , complete all as specified.
S&F in repair mild steel sliding door bolts length 250mm, clip type/ bolt type, stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on clips and two on staple plate complete all as specified.
S&F in repair mild steel barrel tower bolts 200 mm long, stove enamalled black, with bright bolt supplied, complete all as specified and as directed.
S&F mild steel barrel tower bolts 150 mm long, stove enamalled black, with bright bolt supplied and fixed in repairs complete all as specified and as directed.
S&F in repair mild steel barrel tower bolts 100 mm long, stove enamalled black, with bright bolt supplied, complete all as specified and as directed.
S&F in repair mild steel pressed handles 150mm size, oval type, stove enamelled black supplied, complete all as specified and as directed.
S&F in repair aluminium anodized barrel tower bolts 200 mm long of extruded section, complete all as directed.
S&F in repair aluminium anodized barrel tower bolts 150 mm long of extruded section, complete all as directed.
S&F in repair aluminium anodized barrel tower bolts 100 mm long of extruded section, complete all as directed.
S&F in repair aluminium alloy anodized, sliding door bolts 250mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F in repair extruded aluminium alloy handles, 150mm long fabricated type, anodized, complete all as specified and as directed.
S&F in repair 150mm hasp and staple, safety type, of aluminium anodised hinge fixed with screws complete all as specified and as directed.
S&F in repair mild steel cold rolled, medium weight but hinges, 100mm size, complete all as specified directed.
S&F in repair mortice Locks, cupboard, grade I, size 50mm brass with four levers, complete all as specified.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 23cm wide with chromium plated bracket guard and railing complete all as specified and as directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate, 150mm complete all as specified.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 litres and not exc 500 litres complete all as specified.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 litres and not exc 1000 litres complete all as specified.
S&F in repair PVC covers for water tanks incl hingeing device & hasp and staple for locking of capacity 500 liters to 1000 liters tanks complete all as specified.
S&F PVC waste pipe 32 mm to 40 mm dia size with PVC adopter of length between 60 cm to 120 cm as per site requirement suitable for WHBs / Sinks / urinalsetc fixed in repairs complete all as specified and as directed.
M&L for CP Waste fittings for 32 mm dia brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,fixed in repairs all as specified and directed.
M&L for CP Waste fittings for 40 mm dia brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,fixed in repairs all as specified and directed.
S&F in repair waste fitting of PTMT (Half or full threaded) with long shank suitable for 32 mm dia bore pipe for WHBs / Sinks etc (Minimum weight -45 gms) fixed in repairs complete all as specified and as directed
S&F in repair waste fitting of PTMT (half or full threaded) with long shank suitable for 40 mm dia bore pipe for WHBs / Sinks etc (Minimum weight -60 gms) fixed in repairs complete all as specified and as directed
S&F in repair shower rose of 125mm with arm (195mm long with bend of 45 degree with flange) of Brass chromium plated shower rose with any colour for fixing with 15mm pipe all as specified and as directed.
S&F in repair shower rose with arm (195mm long with bend of 45 degree with flange) of PTMT(Minimum weight -40 gms) any colour for fixing with 15mm pipe all as specified and as directed.
S&F in repairs grating doom of PTMT round or square 125mm dia size (Minimum weight -40 gms) complete all as aspecified and directed.
S&F in repair bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs i.e., incl taking down and removal of old unserviceable bib cock complete all as specified and directed.
All as per item No. 89.00 here-in-above, but chromium plated brass body with fancy type bib tap.
All as per item No. 90.00 here-in-above, but long body bib tap.
S&F in repair two way bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair bib Tap, PTMT screwed down high pressure, screwed for 15mm bore iron pipe or for brass ferrule, incl taking down and removal of old unserviceable bib cock complete all as specified and directed.
S&F in repair stop valves/ cocks cast copper alloy with crutch or butterfly handle, screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs all as specified and directed.
S&F in repair stop cocks Chromium plated brass body with capstain head screwed down, screwed both ends for 15mm bore iron pipe or for unions complete fixed in repairs all as specified and directed.
S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 20mm bore iron pipe, complete all as specified and directed.
S&F in repair Gun metal, globe or gate valve with iron wheel head/handle screwed both ends for 25mm bore iron pipe, complete all as specified and directed.
S&F in repair angle cock with flange, cast copper alloy chromium plated with capstain head, fancy type screwed down high pressure, screwed for 15 mm bore iron pipe or for unions, complete all as specified and directed.
S&F in repair nipple suitable for HDPE Water tanks minimum weight -38grms suiatble for 15mmbore pipe, complete all as specified and directed.
S&F basin mixer (center hole) brass body chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.
S&F wall mixer (side Hole) telephonic with provn of flexible tube & hook brass body Chromium Plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed for 15 mm bore iron pipe or for unions, fixed in repairs, complete all as specified and directed.
S&F in repair wall mounted sink mixer with brass casted spout for kitchen sink, brass body chromium plated with capstain heads, fancy type screwed down high pressure, with or without letters "Hot or Cold" with long screwed shanks and flynut screwed, suitable for 15 mm bore iron pipe or for unions, complete all as specified and directed.
S&F in repair stop cock cast copper alloy cast copper alloy, chromium plated, screwed down high pressure, fancy type with long shank and cup (concealed type), screwed both ends for 15mm bore iron pipe or for union, complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling with and incl a pair of suitable mild steel brackets, including cutting for or pinning in and making good disturbed portion as reqd complete all as specified .
S&F in repair vitreous china squatting pan of Orissa patten size 580 x 440 white, front or back inlet with integral footrest including cast iron 'P' or 'S' trap and connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair & making good to floor in CM 1:3 or Cement concrete 1:2:4 all as directed and specified.
S&F in repair vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repair complete and making good the disturbed portion etc. all as specified and directed.
S&F in repair PVC valveless, syphonic action type flushing cistern, low level 10 ltr capicity Dual Flush Mechanic incl, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified incl taking down any type of flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed complete all as specified.
S&F in repair 600 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed,
S&F in repair 450 mm long PVC connection with PTMT nuts on both ends for 15mm bore pipes of approved quality complete and fixed in repair all as specified and directed,
S&F in repair plastic water closer seat, white colour, closed pattern with flat or recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repairs.
S&F in repair hinging device chromium plated for plastic water closet seat suitable for existing size and design fixed in repair complete all as specified and directed.
Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.
All as per item No. 112.00 here-in-above, but 20 mm bore GI tubing
All as per item No. 112.00 here-in-above, but 25 mm bore GI tubing
Supply, fixing, Jointing and testing 15 mm bore galvanised mild steel water tubing 'medium grade' with and including all fittings, fixed to walls and ceiling or laid in floors, incld. necessary cutting chases & making good disturbed surface, complete all as specified and directed.
All as per item No. 115.00 here-in-above, but 20 mm bore GI tubing
All as per item No. 115.00 here-in-above, but 25 mm bore GI tubing
Refixing old GI water tubing of 15 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including necessary cutting chases & testing complete all as specified and as directed.
All as per item No. 118.00 here-in-above, but 20 mm bore GI tubing
All as per item No. 118.00 here-in-above, but 25 mm bore GI tubing
S&F in repair rotational moulded polythene water storage tanks, three layer, white coloured (cylinder vertical with closed top) of capacity 500 ltrs, double walled hoisted and fixed in position including 15/20/25mm bore ball valves (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I , including old u/s existing tank, complete all as specified and directed.
All as per item No. 121.00 here-in-above, but 1000 liter tank capacity.
S&F in repair 40mm bore bottle traps, chromium plated brass body for wash basins with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed , complete all as specified and directed.
S&F in repair PTMT Jet Spray with 1.5 m long flexible tube suitable for 15mm bore pipe or socket complete all as specified and as directed.
S&F in repair Ball valves of suitable for 20 mm bore pipe, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) all as specified and as directed.
All as per item No. 125.00 here-in-above, but suitable for 15 mm bore GI tubing
S&F brass spindle / phase for 15mm dia CP wall mixer, CP WHB mixer, CP two way bib taps,CP bib cocks/ CP pillar cocks / CP angle cocks etc complete all as specified and directed.
S&F Brass spindle / phase for 15mm dia CP concealed stop cocks etc complete all as specified and directed.
S&F in repair PVC bath mirror cabinate box type with shutter of overall size 450mmx350mm complete all as specified and as directed.
S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and as directed.
S&F in repair CP health faucet with 15mm bore flexible pipe of 1.50mtr long complete all as specified and as directed by Engineer in charge.
Resecuring/ re-fixing of Aluminium door/ window/ vents of any description and size by taking down shutter from frame, opening out joints after taking down glass or particle board, replacing the corner piece & defective section members jointing again refixing the glass pane/ particle board etc and complete all as specified and directed by engineer in charge. Note: (i) Floor spring , door closer , lock , glazing , rubber gasket , aluminum glazing , defective aluminium part, and aluminium beading shall be measured & paid seprately.
M&L Powder coated(minimum thickness 50 micron powder coating) aluminium anodised section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for door shutter 1000mm to 1200mm vide and weight between 8.0 kg and fixed complete all as specified and as directed.
S&F for Door closer Aluminium (Die cast) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 1000mm to 1200mm in width and of weight between 61 to 80 kg and fixed complete.
S&F for Mortice lock, vertical type, size 100 mm 4 levers brass with two No's key etc; complete all as specified and as directed
S&F in repair top pivot in aluminium door and fixed complete all as specified and as directed
Cleaning/ taking out sludge/ mud/ silt from manhole and septic tanks of any size, depth and capacity by mechanically in foul condition including dewatering septic tank and manholes when ever required including removing of sludge/muds/silt in a closed container vehicle to a distance outside MD land and or buried in pits by making necessary excavation for filling of sludge and covering by earth on top properly all as specified and directed. Note:- Sludge/ muds/ silt shall be measured before taking out from manholes/ septic tank.
Taking out muddy/ sewage water from manholes, soakage pit/ septic tanks of any size, depth and capacity by using of mechanical sewage/ mud water disposal pump set and dispossed off muddy/ sewage water in a closed container vehicle to a distance outside MD land complete all as specified and directed. Note:- All labour and T&P i.e. sewage water pump set, diesel, transportation of pump set from one place to other place, suction pipe, delivery pipe and manpower, prepair approach to working site/ point etc required for above work, shall be deemed included in unit rates quoted by the contractor and nothing extra shall be admissible on this account.
Cleaning of existing sewage/drain pipes 150mm to 300mm dia at any depth by rodding manually/ mechanically as required at site from manhole and well finishing after cleaning including getting out sludge if any and liquid materials from connecting manholes deposited in lines removing the solid and sludge to any distance place outside the defence land at their own cost and refixing manhole covers etc, the cost of removal shall be included in the quoted rate complete all as specified and directed by Engineer-in-Charge.
Removing blockage any discription in any position including cleaning of SGSW / PVC/ CI pipe upto and including 100 mm bore from kitchen/ bath/ wash hand basin/ urinal/ WC of any length upto gulley trap by rodding/choke remover manually or otherwise including removing & refixing of oval access door cover (up to 6.00mtr hight) complete all as specified and directed by Engineer-in-Charge
Removing blockage any discription in any position including cleaning of SGSW / PVC/ CI pipe upto and including 100 mm bore in any length from gulley trap to 1st manhole by rodding / choke remover, manually or otherwise including removing & refixing manhole covers of 1st manhole complete all as specified and directed by Engineer-in-Charge.
Site clearance soft loose soil including clearing away all grass vegetation, saplings,shrubs, brushwood, undergrowth,roots,and trees not exceeding 30 cm in girth (measured at a height of one meter above ground level) and removing entire rubbish out side MOD land complete all as specified and directed by Engineer-in-Charge
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3.00 m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side complete all as specified and directed. Note:- Excavation and earth work shall be measured and paid separately.
All as per item No. 146.00 here-in-above, but 200 mm bore pipe
All as per item No. 146.00 here-in-above, but 300 mm bore pipe
M&L PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concerete complete all as specified & directed by Engineer-in-Charge.
M&L PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching/ channels of manholes etc complete all as specified and as directed by Engineer-in-Charge
M&L PCC (1:2:4) type B-1 (20mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar (1:1) complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm bore Reinforced cement concrete pipes, one end socketed, class NP-2, laid in trenches and jointed complete all as specified and as directed by Engineer in charge.
All as per item No. 153.00 here-in-above, but 200 mm bore pipe
All as per item No. 153.00 here-in-above, but 300 mm bore pipe
M&L PCC (1:4:8) type D-2 (using 40 mm graded crused stone aggregate) as in bed to150 mm bore salt glazed stone ware drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and directed by Engineer-in-Charge.
All as per item No. 156.00 here-in-above, but 200 mm bore pipe
All as per item No. 156.00 here-in-above, but 300 mm bore pipe
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft/loose soil complete all as specified and directed.
Removing excavated material/soil container vehicle to a distance outside MD land complete all as specified and directed.
Plugging minor leakages of SGSW/ RCC pipes 150 mm bore to 300 mm bore pipes by carefully detecting leakage, cleaning outer surface of pipes and plugging with cement mortar 1:2 and/ or PCC 1:2:4 Type B-1 including rubber packing as required at site all as specified and as directed by Engineer-in-Charge. Note:- Excavation, returning filling & removal of surplus soil shall be measured and paid for separately under respective Items).
Excavation over area in mud or liquid mud / sludge (including removing accumulated water nearby from leaking sewage piplines) not exceeding 1.50 m in depth and getting out in soft/loose soil and returning filling in soils etc after repairs of the pipe etc complete all as specified and as directed. (for repairing leaking sewage pipelines)
Excavation over area in mud or liquid mud / sludge (including removing accumulated water nearby from leaking sewage pipe lines) exceeding 1.50 m depth but not exceeding 3.00 m in depth and getting out in soft/loose soil and returning filling in soils etc after repairs of the pipe etc complete all as specified and as directed by Engineer-in-charge. (for repairing leaking sewage pipelines).
M&L for Jodhpur stone patti slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, laid dry as in manhole coveres, sizes as directed by Engineer-in-charge complete all as specified and as directed.
Attending of complaints for checking the existing electrical items / points for serviceability of continuous electric supply, rectifying No light complaints including carrying out minor repairs / replacement etc as required to make the item functional and replacement of small pieces of wire, screw, refixing of hanging wires and electrical boards with accessories etc all as specified and directed. Note : (i) Replacement of major items shall be measured & paid seperately under respective items of the schedule as supply only. (ii) Each complaint slip restricted to maximum 10 Nos of complaint for each area and for complaint above 10 Nos complaint for each area will be given separate complaint slip. (iii) Complaint register and complaint slip will be provided by contractor without any extra cost as per format given and as directed by Engr-in-Charge (iv) Contractor will ensure all complaints (including sunday/holiday) should be rectify on same working day.
Supply and fix Modular switch 1 way 6A , 1 module size complete all as directed.
Supply and fix Modular switch 2 way 6A , 1 module size complete all as directed.
Supply and fix Modular switch 1 way 16A , 1 module size complete all as directed.
Supply and fix Modular Bell push way 6A with 2 module size with indicator complete all as directed.
Supply and fix Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.
Supply and fix Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.
Supply and fix Modular type regulator 2 module A/C 240 Volts.
Supply and fix of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.
Supply and fix of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.
Supply and fix of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all s specified and directed.
Supply and fix of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.
Supply and fix of Switch piano type, single pole, two way, 5 amps, 230 volts, complete all as specified and directed.
Supply and fix of resistance type regulator A/C 240 Volts.
Supply and fix of Bell push, flush type 5 amps, 230 volts.
Supply and fix of electric call bell ding dong AC 230 volts Single Pole.
Supply and fix of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.
Supply and fix of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.
Supply and fix of wall mounting light fitting City 2 and incl suitable size 9W retrofit LED bulb and making necessary electric connection, complete all as specified and directed.
Supply and fix in replacement of recessed mounted LED light fitting of 2' x 2' size, suitable for false ceiling, 34/36 Watt, 6500K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed.
Supply and fix in replacement of Energy efficient round / square recessed mounted polycarbonate fixture flat panel 12W LED 6500K white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directeD.
Supply and fix in replacement LED ceiling light driver 24W to 36W, 240V and complete all as specified and directed.
Supply and fix in replacement LED ceiling light driver 9W to 12W, 240V and complete all as specified and directed.
Supply and fix of MCB, C Curve type, 10 kA, 63Amp, TPN with over load and short circuit protection, complete all as directed.
Supply and fix of MCB, C Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.
Supply and fix of MCB, C Curve type, 10 kA, 40Amp, SPN with over load and short circuit protection, complete all as directed.
Supply and fix of MCB, C Curve type, 10 kA, 50 to 63 Amp, Single Pole with over load and short circuit protection, complete all as directed.
Supply and fix of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.
M/S SUMAN ENTERPRISES
mahalaxmi enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .