Providing repairs / replacement of electrical installations to BIRRD hospitals in ESD-SBH for the year 2026-27

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and Fixing of ISI mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe for concealed wiring in walls of brick building duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and for surface wiring on chromium plated metallic base saddles on ceiling of roof / existing brick building walls, columns, beams, roofs / trusses / channel etc., and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal.

Supply and laying of PVC Casing & Caping (ISI Mark) with double locking arrangements with groover trunking of size not below 12.5mm height 19/20mm width with all accessories duly sealed at points and erected on wall / ceiling including cost of all materials and labour charges complete. Makes:- Sudhakar / Finolex / Polycab / Kumar / Legrand / OBO

Supply and fixing of fabricated M.S clamps made out of various sizes of (25mm x 3mm, 25mm x 6mm etc.) MS flat with necessary holes on either side with suitable MS bolts and nuts and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of PVC pipes, Conduit pipes etc., on Trusses / Channels etc. including all labour charges etc., complete.

Supply and wiring with 2 run of 14/0.3mm (1.0 sq.mm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping with pilot ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Wire Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Hvells / ABB / Indo Asian / GM / HPL

Supply and wiring with 3 run of 14 / 0.3mm (1.0Sqmm) PVC insulated FRLS flexible copper cable (ISI MARK) as per IS:694 / 1990 specification in existing PVC pipes / casing & caping without ceiling rose, 6 Amp Mini Modular switch to switch control box including all labour charges etc., complete for Light, bell, fan and Exhaust fan points in Residential Buildings. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI Mini Modular Switch Makes: Anchor / Gold Medal / Havells / ABB / Indo Asian / GM / HPL

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 3 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 5 wire of 84/0.3mm (6.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and fixing of 16 Amps Traingular Plug Top on the existing switch board and giving connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 5/8" Angle / Batten Holder on the existing junction boxes/ T.W Board etc. and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Deluxe Fan Regulator Rotary step 100W on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Buzzer on the existing junction boxes, T.W Board etc., and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Ding Dong Bell on the existing junction boxes, T.W Board etc., and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of Remote Bell on the existing switch board and giving necessary connections. Makes: Anchor / Gold medal (Olive) / GM (G Home) / Havells ( Reo)

Supply and fixing of 6 /10 Amps 1 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 /10 Amps 3 / 2 pin 2 module Modular Socket with shutter on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 20 Amps 1 Way 1 Module Modular Switch with Neon Indicator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 2 Module Modular Type Electronic Step Type Fan Regulator on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-B: Makes: Legrand Myrius / Crabtree Thames Platinum / Anchor Roma / Clipsal / Havells Coral or Fabio / Goldmedal (Curve/Air) / Schneider Livia / C&S / L&T / HPL / Kolors / Indo Asian / GM (GNINE)

Supply and fixing of 6 /10 Amps 2 way 1 module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 1 or 2 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 4 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Modular Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 8 Modular Horizontal / Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 12 Modular Vertical Cover Plate & Frame on to the Existing Metal Box (Switch control Box) including all labour charges etc., complete. Grade-A: Makes: LegrandArteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree- Murano - Amare - Ducor / GM Four-Five

Supply and fixing of 6 Amps 1 way Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor /Gold Medal /Havells /ABB /Indoasian / GM / HPL.

Supply and fixing of 6 Amps 3 / 2 pin Mini Modular Socket with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor /Gold Medal /Havells /ABB /Indoasian / GM / HPL.

Supply and fixing of 16 Amps Mini Modular Switch with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor /Gold Medal /Havells /ABB /Indoasian / GM / HPL.

Supply and fixing of 16 Amps (2 in one) Mini Modular Switch & Socket combined with cover Frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor /Gold Medal /Havells /ABB /Indoasian / GM / HPL.

Supply and fixing of Mini Modular Stepped type Electronic Regulator with cover frame on existing Switch board and giving necessary connections including all labour charges etc., complete. Make: Anchor /Gold Medal /Havells /ABB /Indoasian / GM / HPL.

Fixing of given Tube light luminaire / PL fitting on wall / Ceiling / Trusses / Channels on PVC/ TW round blocks / Epoxy insulator / 3"x2"x1" TW reaper with all accessories, labour charges and giving necessary connections.

Fixing of Mirror optic tube light luminaire in false ceiling / P.O.P with necessary arrangment including giving connections and all labour charges etc., complete.

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and fixing of Rawal fan hook in the ceiling and repacking the same with M.Seal for ceiling fans etc., complete.

Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Fixing of given 25 Ltrs to 50 Ltrs Storage type water heater with 2 Nos. of Nylon / PVC / Metallic hose pipe etc., on wall with Anchor fasteners of size 12mm x 75mm pin type including connections etc., complete.

Supply and fixing of Single phase Electronic type energy Meter to operate in 240V AC,50 HZ as per IS13010 with up to 40 Amps range with 200% over load capacity complete with connections etc., complete on the existing board. Make: Conzerve / Elmeasure / Meco / HPL / Havells / L&T.

Supply and fixing of Three phase Electronic type energy Meter to operate in 415V, AC,50 Hz as per IS13010 Up to 40 Amps range with 200% over load capacity complete with connections etc., complete on the existing board. Make: Conzerve / Elmeasure / Meco / HPL / Havells / L&T.

Supply and fixing of 125 Amp TP & N SDFU Switch as per IS:13947 with sheet steel enclosure without fuse units on wall etc., complete. Grade-A: Make: L&T / C&S / ABB / Siemens / GE

Supply and fixing of 250 Amp TP & N SDFU Switch as per IS:13947 with sheet steel enclosure without fuse units on wall etc., complete. Grade-A: Make: L&T / C&S / ABB / Siemens / GE

Supply of 100 A to 160 A HRC fuse links (DIN/Bolted Type) as per IS:13703. Makes: L&T / Siemens / Standard / Havells / HPL / Indo Asian / C&S / GE

Supply of 250A to 350A HRC fuse links (DIN/Bolted Type) as per IS:13703. Makes: L&T / Siemens / Standard / Havells / HPL / Indo Asian / C&S / GE

Supply of 400 A HRC fuse Links (DIN/Bolted Type) as per IS:13703. Makes: L&T / Siemens / Standard / Havells / HPL / Indo Asian / C&S / GE

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 8 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 12way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3 with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 4 Way TP & N Horizontal type Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-43 protection (Metal door) firmly on the surface of the wall etc., complete. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 20 Amps 2 Pin & Earth Socket Metal Plug Board with 1 No. 20 Amps SP MCB 10KA 'C' series ISI mark including the cost of MCB on Surface of the wall and giving necessary connections. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 20 Amps 2 Pin & Earth Socket Metal Plug Board with 1 No. 20 Amps SP MCB 10KA 'C' series ISI mark including the cost of MCB Concealed in the wall with neat plastering and giving necessary connections. Grade-A: Make: Legrand (Ekinox 3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 63 Amp DP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 100 Amp FP Isolator as per IEC:60947 Part-III in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 40 to 63 Amp SPN/DP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 125A 4 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA, with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 250A 4 Pole MCCB, Adjustable Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 36/35 KA, with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of universal mounting metal plug board and socket suitable for D.P. RCCBs including labour charges for surface mounting. Grade-A: Makes: Legrand (ekinox3) / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of RCCB Up to 40A Double Pole, 30mA for earth leakage protection, confirms to IEC:61008 and IS:12640-1 in the existing boards including internal connections and Labour charges etc., complete. Grade-A: Makes: Legrand DPX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply & fixing of 1 1/4" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angles of 35x35x5mm having length 20Cm (grouted portion of MS angle into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.

Painting to the existing 6 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make : As approved in Civil SSR-2020-21

Painting to the existing 7.5 mtrs height with Single/ double stem steel tubular poles / pipes of street lights / Road light / Yard lights including stems, MS boxes / cross arms / GI pipes clamps to the pole with one coat of enamel paint of approved colour from coping to a height of 1 Mtr and single/ double stem pipe of approved colour and painting the remaining pole with one coat of aluminium paint & painting one coat of AcrylicExterior Emulsion paint to the pole coping as directed during execution. Necessary ladder / scaffolding arrangement is to be made by contractor at his cost. (If departmental ladder is used an amount of Rs.25-00 / pole will be deducted from the contractor bill subject to without causing any damage to the ladder). Make : As approved in Civil SSR-2020-21

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 50 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 95 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-B: Make: RPG / Fortune Art / Delton / Orbit.

Supply and transportation of 120 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 240 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 300 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Laying of U.G cables from 185 Sq,mm to 400 Sq.mm through existing G.I.Pipe and back filling of trench including labour charges etc.,complete.(Excluding the cost of G.I Pipe)

Supply Laying and Transportation of Outer dia 50mm and inner dia 38mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Supply and fixing of LT cable route indicators made out of cast iron fixed to one meter long 1''x1''x1/4'' MS angle 4'' bent at one end buried in the ground and the other end fixed with G.I. bolts and nuts to the cable route indicators as directed during execution.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 25 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 50 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 95 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 120 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 240 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 300 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) for 400 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc upto 16 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 25 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 50 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 95 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 120 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 240 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for 300 Sq.mm with brass washers of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size. Make: Dowels / Comet / SMI

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

Supply and fixing of 18.5''x15.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc., complete.

Supply and fixing of 12.5''x8.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc., complete.

Supply and fixing of 8.5''x6.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc., complete.

Supply and fixing of 4.5''x4.5'' with 3 mm thick laminated sheet of I.S.I Mark white or approved colour suitable for existing Concealed T.W. Board with brass screws, cup washers etc., complete.

Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 8 or 9 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Supply and fixing of 12 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Providing of Independent Earthing with 40mm Dia GI Pipe 'B' class of 2.5 Mtrs length after excavating an earth pit of size1.5 m X 0.9 m X 2.55 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.65 m) with the following specification: (a) the GI pipe shall be inserted into the Ground for 2.25 M below the inspection chamber bottom 300 mm all around This pipe shall be covered with the mixture of 40 Kgs of coke, 20 Kgs of salt & sand including necessary earth work excavation in all kind of soils. (b) the excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water.

(c) the top 0.25 m of GI pipe shall be exposed into inspection chamber of 0.40 X 0.40 X 0.40 m internal size . The all around inspection chamber shall be providied with 0.1 m thick CC (1:2.5:5) walls with 20 mm thick HBG metal such that the pit shall be exposed 100 mm above ground level. The bottom of the inspection chamber shall be provided with 100 mm thick CC (1:2.5:5) using 20 mm HBG metal with 200 mm outer offset at all four sides. (d) All the inside & outside exposed faces of the inspection chamber shall be plastered with CM (1:3) 12 mm thick. (e) A 65 mm dia PVC conduit is to be embeded through 100 mm thick wall at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound.

(f) The top of the 40 mm dia GI pipe shall be welded with reducer of 20mm dia connected with 20mm dia of 0.3 long GI pipe and 20 mm GI pipe is to be fixed with funnel & wire mesh. (g) After giving earth connections to the 25 X 6 mm GI flat with bolts, nuts & washers, a pre-casted RCC (1:2:4) slab cover of 40 mm thick with lifting hook is to provided on top of the Earth pit. (h) Necessary Meggar testing is to bo done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth.

After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease. The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification: (a) Supply of Copper Earth Electrode, 38 mm dia wall thickness 1.60 mm, 2 meter long, inner space of pipe filled with high conductive material along with 1 bag (25Kg to a bag) of Earth Life Compound. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing. b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts & washers. (e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Supply of Earth Life Compound as per IS 3043: 1987 bag consists of 25 Kgs. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing.

Supply and run of 25mm X 6mm G.I Strip for earth electrode to required places by Surface in walls, flooring including cost of all accessories and giving necessary connection with 3/8"x2" GI Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Supply and run of ' 8 ' SWG GI wire for earth electrode to required places buried in ground at not less than 0.5 mtrs below the ground level after excavation of trench and filling with 6" sand all around the earth strip and refilling etc., and giving necessary connections with 3/8" x 2" GI, Bolts, Nuts and Washers wherever joints has to be done. The strip has to be either riveted (or) bolted (or) gas welding neatly and all labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary rock (not requiring blasting) to the required width and depth and depositing the same on bank as directed during excution etc., complete .

Supply of Man Mazdoor (Unskilled Work Men)

Supply of …3 core 2.5 Sqmm…...PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM

Supply of …3 core 4.0 Sqmm…...PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million

Supply and fixing of..12 W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGEVenture of 150 to 265 Volts AC, P.F > 0.9, SurGEVenture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / alonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS /CREE /NICHIA /OSRAM /SAMSUNG/Everlight.

Supply and transportation of ...45W..LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete, a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) / GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge) / Halonix (Modular/ Lumos-Super) / Havells (Endura Series)/Greenlites(HI-Lux) /Capart(Premium)/ Polycab/Keselec / HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG.

Supply and transportation of ..50W/60.. LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/ Polycab /Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood) / FortuneArrt (Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG..

Supply of 5.0W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base, . Makes : Phillips /Crompton / Bajaj / Havells / Halonix/GM/ HPLSyska / Green Lites / Fortune Arrt / GoldMedal / Luker/Leo/Orbit /Rhino /GLO LED/Million/Victoria/Benlo/Goldwyn

"Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc complete 4C x 70 sq.mm Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/Orbit/ Paragon/RR Kabel /RPG /Rhino /Pawancab/AKG/LS cable/ Polywires

Supply and making end termination with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc of following size 70 Sq.mm Makes:Dowels/Jainson/Comet

Supply and fixing of ISI marked ( IS:4159) marked copper sheathed,nickle plated, mineral filled heating element including making connection testing etc as required

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with Regulator Makes: Atomberg/ Halonix/Havells/ Crompton

Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton /Almounard /Havells Turbo Force/Halonix Krypton

Supply of 16" (400mm) Wall mounted Fan. Makes: Crompton Wind Flo /Bajaj Elite /Havells Swing / Orient Wall 50/Halonix Krypton/G.M. (Bolt)/ Goldmedal(Nora-16)

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 25 Ltrs. capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: Prevailing models of Crompton/ Jaquar / Venus / Racold / AO Smith /Havells /Warmex makes and shall be confirming to SOR specifications

Clearing the existing ceiling fan at diferent offices etc., by using the ladder given at site".

Supply and fixing of 32 X 20 mm P.V.C Mini trunking with all accessories fxing on surface wall for urface wiring on Bricks / stone wall , RCC roofings , Trusses channels includi ng all labour charges etc., complete. Mase : Legrand / OBO Beterma

Supply and Fixing of 80 X 50 mm P.V.C. Trunking syatem with all accessories fixing on surface walls for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (The rate for plastic frame anchor with countersunk, Tape, Sealant and adhesive for fixing of PVC Trunking will be paid separately) Make : Legrand / OBO Bettermann

Supply and Fixing of 105 X 50 mm P.V.C. Trunking syatem with all accessories fixing on surface walls for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (The rate for plastic frame anchor with countersunk, Tape, Sealant and adhesive for fixing of PVC Trunking will be paid separately) Make : Legrand / OBO Bettermann

Supply and fixing of 3 Module Plastic surface box with Modular Cover plate \ With frame on to the wallwith all required accessories and all labour charge etc., complete Make: Legrand mosaic /north west /M.K /G.M. /L&T / Legrand arteor

Supply and fixing of 8 or 9 Module Plastic surfaces box with Modular Cover plate \ Mith frame on to the wallwith all required accessories and all labour charges etc., complete of make: Legrand Arteor / Legrand Mosaic / North West / M.K / G,M / L&T

Supply and fixing of 12 or 16 Module Plastic surfaces box with Modular Cover plate \With frame on to the wall with all required accessories and all labour charges etc., complete of make: Legrand Arteor /Legrand Mosaic /North West /M.K / G,M / L&T

Supply and fixing of thermoplastic pole box single of size 330x230x120mm at Hensel / Sintex make for single stem street light fitting and the box should be fixed at the site as directed by the site engineer. A 6 mm thick hylum sheet with 4 nos brass bolts, nuts and washers should be supply and fix firmly inside the box.

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of 14 SWG CRCA sheet, 500Wx1530Hx500D required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification. Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus. Specifications: 1. Input Power: 18W ±5% 2. Input Voltage and Frequency: 230V ±5% AC, 50Hz. 3. Power factor : >0.95 4. THD % : <15% 5. Operating Voltage : 140 - 270 VAC 6. Surge Protection : ≥ 2.5 kV 7. LED make: Nichia (Japan) / Osram (German) / Philips Limited/ Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison. 8. Luminous Flux (Lumen) : 1800 ± 5% 9. Luminous Efficiency (LM/W) : 100 ± 5% 10. Colour Temperature (K): 5500K to 6500K 11. CRI : ≥ 80 12. LED Beam Angle : >150º 13. IP Grade: IP20 Warranty : 5 Years. Standards Applicable: IS: 10322 Part-5, Sec-3. Manufacturers internal Type Test

Supply of T8 /T5 18W LED batten type fittings Make: Make: Phillips / BaJaj / Crompton Greaves /Wipro / K.Lite / Halonix / ORKUS / AKURAI / Havells/jaquar Technical Specifications: Electrical Parameter : Specification 1) Input power (W) :18±5% 2) Input Voltage (V) :230±5% 3) Power factor :>0.95 4) THD % : <15% 5)Output Voltage (with load) Vdc :60 to 80 V DC 6) Output Current (mA) dc : 225±5% 7) Driver Efficiency (%) : ≥90% 8) Operating Voltage : 140-270 VAC 9) Operating Frequency(HZ) :50± 3 Hz 10) Output open circuit protection :YES 11) Output short circuit protection :YES 12) Surge Protection : ≥ 2.5 kV Optical Specification 1) LED make: NICHIA (Japan) / OSRAM (German) / PHILIPS LIMITED/ CREE (USA) / BRIDGELUX (USA) /SEOL / LEDNIM /EVERLIGHT / LED / EPISTAR / EDISON 2)Luminous Flux (Lumen) : 1800±5% 3)Luminous Efficiency (LM/W) : 100+5% 4) Colour Temperature(K) : 5500K to 6500K 5) CRI : ≥ 80 6) LED Beam Angle (Degree):>150 Degree Mechanical: 1) IP Grade : IP20 2) Base : NA 3) Housing : PC 4) diffuser : PC

(Rupees Ten Lakhs Fourteen Thousand Twenty NIne and Paise Forty Eight only)