Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 LAccepted-AOC C O CHOUDHARY 45 PEER BABA TARUSHAW ROAD HALWARA A D DISTT LUDHIANA PIN CODE 141106 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141106 | ₹10.8 L Quoted ₹11.1 L | L1 | Accepted-AOC Due to lowest accepted |
| 2 | L2₹11.3 L+₹16,675 (1.50%)Rejected-Finance | ₹11.3 L+₹16,675 (1.50%) | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹12.2 L+₹1.1 L (9.61%)Rejected-Finance | ₹12.2 L+₹1.1 L (9.61%) | L3 | Rejected-Finance Other than lowest |
| 4 | Rejected-Technical | - | - | Rejected-Technical Running contract not completed. Show cause notices issued. |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
21 Aug 2021, 6:00 pmClosed
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana
RECANING OF WOODEN/STEEL CHAIR, REPAIR TO SOFA SET, BEDS AND RE-WEAVING OF CHARPOYS AND REPAIR OF STEEL AND WOODEN FURNITURE INCLUDING POLISHING / PAINTING AT FURNITURE YARD GE LUDHIANA
2021_MES_462305_1
GE/LDH-17/2021-22
Open Tender
Civil Works
Item Rate
270 days
under GE Ludhiana
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹40,000
Yes
13 Sept 2021
23 Jul 2021
23 Aug 2021
23 Jul 2021
21 Aug 2021
2 Aug 2021
24 Jul 2021 - 1 Aug 2021
Amount
RE-CANING OF WOODEN CHAIRS: M&L for recaning of wooden chairs of Godrej Pattern with and including half round plastic cane 1.5mm to 2 mm wide and for border 3mm wide cane plastic including cutting and removing of old unsv cane from the frame complete all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane : Premier/Shah
Chair dining Drg No: FD-1105, 279
Chair Easy . Drg No: FD- 229
Chair writing. Drg No: FD- 280
RE-CANING OF CHAIR VERANDAH: M&L for recaning of chair Verandah with and including cane plastic 4mm wide half round complete including cutting and removing of old unsv cane from chair verandah and applying one coat of synthetic enamel paint (White) and providing four PVC shoe of best quality including removing of old unsv PVC shoes from Chair verandah all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane: Premier/Shah, Make of Enamel: Apcolite of Asian : FD-256 &359
CHAIR EASY M&L for providing following parts of chair easy of Ist class Hard Wood as shown on drawing including dismantling & removing of old unsv parts from the frame and French polished with two coating through out the item. complete all as specified & directed by Engineer-in- charge. FD-229
Rear leg
Front leg
Seat frame
Back frame
French polishing with one or more coats on chair frame and replacement of four PVC shoe on the legs.
CHAIR DINING: M&L for providing following parts of Chair dining of Ist class Teak Wood as shown on drawing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-279,1105,MAP-II/04
Rear leg
Front leg
Side rail of seat
Front rail of seat
Stiffener
French polishing with one or more coats on chair frame and replacement of four PVC shoes on the legs
CHAIR WRITING M&L for providing following parts of Chair Writing of Ist class Teak wood as shown on drg including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-280
Front leg
Rear Leg
Front rail of seat
Side Rail of seat
Stiffners
French polishing with one or more coats on chair frame and replacement of four PVC shoes on the legs.
TABLE BED SIDE M&L for providing following parts of Table bed side dismantling & removing of old unsv parts from the frame complete all as specified & directed by Engineer-in- charge. Drg No:FD/E6/MAP/15 R
Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.
Table Bottom made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.
Table side made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.
Mild steel powder coated handle100mm long for drawer complete all as specified & directed by Engineer-in- charge.
6mm thick commercial plywood with headless nails of table bed side for fixing table back side complete all as specified & directed by Engineer-in- charge.
Telescope stainless steel channel for suitable size as required complete all as specified & directed by Engineer-in- charge.
French polishing with one or more coats on chair frame and replacement of four PVC shoes on the legs.
TABLE WRITING: M&L for providing following parts of table writing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-275
Table top 1145x600mm made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick shall be provided etc complete.
Long Rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Short Rail made of first classTeak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Leg made of first class Teak Wood duly smoothed size and shape as shown on drg all as specified & directed by Engineer-in- charge.
Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Drawer made out of 12mm thick Comercial Ply including teak wood edging including 25mm dia knob as per Trade pattern complete all as specified & directed by Engineer-in- charge.
Shutter made out of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick complete all as specified & directed by Engineer-in- charge.
French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.
TABLE PEG M&L for providing following parts of Table Peg including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-277
Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick complete all as specified & directed by Engineer-in- charge.
Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge
Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in-Charge.
French polishing with two coats on table frame and replacement of four PVC Shoes on the legs.
TABLE CENTRE M&L for providing following parts of Table Centre including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-274
Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.
Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge
Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Stiffners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.
TEAPOY M&L for providing following parts of Teapoy including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg: FD-278
Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge
Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge
Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge
Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engr-in-Charge.
Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
French polishing with two coats on table frame and replacement of four PVC Shoes on the legs.
TABLE DINNING FOR 6 PERSONS M&L for providing following parts of table dinning for six persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg: FD-273, FD/MAP-II/03
Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.
Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.
French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.
CHAIR DINNING CUSHIONED M&L for providing following parts of Chair Dining Cushioned including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg: FD/E6/MAP/04
Cushioned seat as shown on drg complete all as specified & directed by Engineer-in- charge.
Stiffeners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Rear Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Front Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Side rail of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
Front rail of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.
French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.
SOFA SET THREE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. Drg:FD/E6/Map/07
SOFA SET SINGLE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. Drg:FD-373, FD/MAP-II/02
ALMIRAH LARGE STEEL S&F for the following parts of Almirah large steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-1032, FD-1033
Mild steel lock 65mm size with key in duplicate
Mild steel chromium plated handle 100mm long.
Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge. Make of Enemal: Apcolite of Asian
REPAIR TO ALMIRAH MEDIUM STEEL Supply and fixing for the following parts of Almirah medium steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-1031,1034
Mild steel lock 65mm size with key in duplicate
Mild steel chromium plated handle 100mm long.
Paint with two coats on almirah all as specified & directed by Engr-in-Charge. Make of Enamel: Apcolite of Asian
S&F in replacement of the following components of chair revolving all as specified and shown on drg. FD/E6/MAP/01,75M
Replacement of PVC Base of chair revolving.
Replacement of Shocker of chair revolving.
Replacement of Arms of chair revolving
Removing of old material i.e.rexine cloth ,cloth marking ,fome seat & back etc and material and labour for providing the above mentioned items
Replacement of ply Bed Hard Top and fixing new 12mm thick plywood BWR grade with 50mm long 4mm dia fully threaded nuts and bolts with washers on both side 2 No in each short rail including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. make:- Orchid / century / Greenply Drg:FD/E6/MAP/08R
M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from BED HARD STEEL complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of the following components of Chair Writing Cushioned/Chair Visitor dismantling unserviceable components all as specified and shown on drawing all as specified & directed by Engineer-in-Charge. Drg No FD/E6/MAP/12
Replacement of Arms
Supply and fixing of cushioned seat as shown on drawing including removing/taking off old unsv Cushioned seat complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Cushioned back as shown on drg including removing/taking off old unsv Cushioned back complete all as specified and as directed by Engr-in-Charge.
Supply for Foam cushion of 32 density of size 21"x22"x4" Foam Cushion covered with superior quality tapestry cloth as approved by the GE including removal of old unsv cushion and tapestry cloth of Sofa Sets Make of Cushion: Sleep Well/Curl-On
S&F in replacement of the following components of table computer as specified and shown on drg. FD/E6/MAP/01
Teliscope channels for table.
Knob Teak shade as per trade complete.
JAY ANN CONSTRUCTION COMPANY
singh traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .