e-tender for the Office Furnishing Works at Alappuzha

Reception Cabin in Front Office with Door Supply and installation of Front office Cabin of size 300x210 cm , 200x210cm . The Table Top shall be made of 18 mm thick side leg 18mm thick HDMR Board with PVC edge band lipping , 8mm etching glass. CPU tray and Keyboard tray One Drawer Shall be provided. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and complete, as directed Table Size : 240x60x75cm

Teak wood Jefferson Chair – SPl Type

Dias platform using 18mm thickness 303 ply with support for wood pieces with full covering carpet floor area – 360x200x20cm

Supply and installation of free standing straight table of size 1600Lx 900W x 760H (or nearest size)Main Table The Table Top shall be made of 25mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU trolley and Keyboard tray. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and Movable type Table With Side Table size 1600Lx 900W x 760H

Executive Chair ( Spl Type )

Perferated Sheet Visitors Chair Three Seater Type (Good Quality )

Storage For Secretary New storage installing Fully made of HDMR 18 mm thick Top with knockdown fitting,2mm thick PVC Edge banded, 2 tone addition lipping for Storage tops and legs 3 Partition inside. Size : 1200X400X1200mm

Cabin 1to7 Aluminium Partition (7 Cabin) Supply and Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…(Woodn Colour Material)

Cabin Table :- Supply and installation of free standing straight table of size 1500Lx 600 x 750H (or nearest size) The Table Top shall be made of 18 mm thick side leg 18mm HDMR Board with PVC edge band lipping. CPU tray and Keyboard tray Shall be provided. And one Drawer and one Cupboard The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading Charges and complete Table Size : 1500x600x750

Aluminium Partition work Office Staff :- Supply ad Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…(Wooden Colour Material)

Staff Table :- Supply and installation of free standing straight table of size 1200Lx 600 x 750H (or nearest size) The Table Top shall be made of 18 mm thick side leg 18mm HDMR Board with PVC edge band lipping. CPU tray and Keyboard tray Shall be provided. And one Drawer and one Cupboard The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading Charges and complete Table Size : 1200x600x750

Storage 12,13 Fully made with 18mm/ thick HDMR Double side Laminated board, knock down fitting, visible edges are lipped with 1mm PVC edge band, vertical support to be provided 18 mm Board at an intervel of 80-90cm & horizontal pannels to be provided at an intervel of 45 cm. Bottom with 18 mm board Providing with Door and LockSize :900X400X1200

Perferated Sheet Visitors Chair Three Seater Type (Good Quality)

Cabin Table :- Supply and installation of free standing straight table of size 1500Lx 600 x 750H (or nearest size) The Table Top shall be made of 18 mm thick side leg 18mm HDMR Board with PVC edge band lipping. CPU tray and Keyboard tray Shall be provided. And one Drawer and one Cupboard The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading Charges and complete Table Size : 1500x600x750

Storage for Cabin Sl.No.15,16 New storage installing Fully made of HDMR 18 mm thick Top with knockdown fitting,2mm thick PVC Edge banded, 2 tone addition lipping for Storage tops and legs 3 Partition inside. Size : 900X400X1200mm

Perferated Sheet Visitors Chair Three Seater Type (Good Quality)

Aluminium Partition Work Office Staff :- Supply ad Installation of Aluminium Partition: consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc…(Wooden Colour Material)

Staff Table :- Supply and installation of free standing straight table of size 1200L x 600 x 750H (or nearest size) The Table Top shall be made of 18 mm thick side leg 18mm HDMR Board with PVC edge band lipping. CPU tray and Keyboard tray Shall be provided. And one Drawer and one Cupboard The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading Charges and complete Table Size : 1200x600x750

Storage Fully made with 18mm/ thick HDMR Double side Laminated board, knock down fitting, visible edges are lipped with 1mm PVC edge band, vertical support to be provided 18 mm Board at an intervel of 80-90cm & horizontal pannels to be provided at an intervel of 45 cm. Bottom with 18 mm board Providing with Door and Lock Size :900X400X1200

3 Seater Drawer Table 20,21 Supply and installation of free standing straight table of size 1800Lx 600 x 750H (or nearest size) The Table Top shall be made of 18 mm thick side leg 18mm HDMR Board with PVC edge band lipping. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading Charges and complete Table Size : 1800x600x750

Horizondal Blinds - 40 Ns

Thahasildar Cabin Executive Table [Sl.No. 22-Sl.No.24] Supply and installation of free standing straight table of size 1800Lx 900W x 760H (or nearest size)Main Table The Table Top shall be made of 25mm thick side leg 18mm pre - laminated particle board with PVC edge band lipping. CPU trolley and Keyboard tray. The rate shall be inclusive of cost and conveyance of all material, labour, transportation, loading - unloading charges and Movable type Table With Side Table. size 1800Lx 900W x 760H

Executive Chair ( Spl Type )

Perferated Sheet Visitors Chair Three Seater Type (Good Quality)

Storage For Cabin :- New storage installing Fully made of HDMR 18 mm thick Top with knockdown fitting,2mm thick PVC Edge banded, 2 tone addition lipping for Storage tops and legs 3 Partition inside Door With Lock and Handel all providing etc…Size : 2100X400X2100mm

Ceiling Work :- Providing and fixing fall ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating and consisting of angle cleats with flanges center to center, one flange fixed to the ceiling with dash fastener bolts, other flange of cleat fixed to the angle hangers of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels running center to center, to which the ceiling section with tapered flanges having lips centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips G.I. wire at every junction, including fixing perimeter , the perimeter of ceiling fixed to wall/partition with the help of raw plugs at center, with drywall screws including fixing of gypsum board to ceiling section and perimeter channel with the help of drywall screws of size, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes cutouts made with frame of perimeter channels suitably fixed. Painting and finishing work for False Ceiling

Ceiling Light :- Using Ceiling Light Square type New Model 15 W 1/1 Good Quality 2 Year Warranty

TKT PVC Wall Paneling :- TKT PVC Durable & hygienic surface, Water & termite proof Fire retardant Easy to install / clean, No need for paint ever Reloadable/Reusable/ Recyclable Excellent heat insulation, Light weight / No Maintenance Cost effective / long lasting

Window Curtain Work :- Zebra blind curtain Supplying, & fixing in position coloured Good Quality Cloth washable curtain Eyelet Curtain Rod and Bracket inclusive of all recommended accessories color pattern etc

PASSIVE DEVICES-DATA Sl.No.30-Sl.No. 41] SupplyofCat6UTPcable–(100%Solidbarecoppercable,ETLcertified,ULListed Product ) (One Box containing 305 Mtr)

Supply of Information out let – Cat 6 - IO to System

Supply Of CAT 6 Information outlet modules in Patch Panel

Supply of 3*3 surface mount box for Information Outlet

Supply of Cat 6 .5 mtr patch code for rack side

Supply of Cat 6 1 mtr patch code for IO to system

PVC Casing and Capping /conduits/flexible etc (Press feet (ISI Mark ) or any other ISI mark (25MM Casing/conduits)/Pipe

PVC Casing and Capping /conduits/flexible etc (Press feet (ISI Mark ) or any other ISI Mark (32 MM Casing/conduit)/Pipe

https://www.indiamart.com/proddetail/pvc-trunking-21818358948.html(https://www.indiamart.com/proddetail/pvc-trunking-21818358948.html塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Laying Charges For Cat 5/6 Utp/Stp Cable Fixingandterminationofinformationoutletcat5/Cat6modularjackin Network With Surface Mount Box Electricity Work (Labour Charges ) All

24 port switch with internet port 10\100\1000

Supply and fixing 9 U hub rack with its all support accessories good Quality

Electrical Work Power Point Outlets :- Supply & Installation of 3 Nos of 6A Sockets controlled by 2 Nos 5 A Switches with front plate with enclosure and other accessories etc..(Mk /Roma/Crabtree) and wall light and Fan Switches including

Wall Fan