Garjanbahal to Sahaspur_Road_Pot hole repair and and PMC,SC_0.000 to 4.870

Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge

Providing ,laying ,spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant ,carriage of mixed materials by tipper to site ,laying in uniform layers with pave .

Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60 kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.

Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 0.25 to 0.30 Kg/ Sqm on prepared bituminous surface using mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision).

Providing & laying open graded premix carpet of 20 mm thick on pre-coated surface with specific graded crushed aggregate for wearing course including loading of aggregate filling & packing to proper camber & consolidation with PRR including hire & running charges of PRR etc complete as per directed by the Engineer-in-charge .

Providing & laying premix seal coat using 6 mm size chips with bitumen 6.8 kg /10 sqm laying & rolling with PRR 8-10 ton capacity etc complete as per directed by the Engineer-in-charge .

Coonstruction of embankment with approved materials obtained from borrow pits with a lift upto 1.5 m transporting to site ,spreading ,grading to required slope and compcting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification clause 301.5 .

Providing & erecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Clause-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 801.3 ,fixed over 2 mm thick aluminium sheeting Clause 6.5.2 of IRC 67 -2012 with angle iron frame 75 mmx75mmx6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6 mm .1200 mmx900 mm Informatory Sign Board

Providing & erecting direction and place identification retro-reflective sign as per IRC-67-2012 made out of Clause-B and high intensity prismatic grade sheeting as per ASTM D 4956-09 Type-III and IV strictly conforming to Clause 801.3 ,fixed over 2 mm thick aluminium sheeting Clause 6.5.2 of IRC 67 -2012 with angle iron frame 75 mmx75mmx6mm fixed with 2 nos and 3 nos horizontal and 1 no vertical extra supporting member of MS angle of size 50x50x6 mm .Village Identification board (600x450 ) mm