Providing and fixing of 2 Nos Decorative Architecture Ornaments and 2 set of open gym facilities, Garden Victorian Bench, Dustbin and Jhullas in Pt. Deendayal Upadhyay Park, Sector 22 23, Ward No.04, Faridabad.

Amount

1. FRP Moulded Canopy (Gazebo Hex. Shape) Double Finishing sheet in 18` Dia i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical M.S. pipe of size 88 mm and height 2890mm, the central M.S. pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.0 Paints [Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division)] item with GST, Transportation, Installation with C.C and amp: labor at site.) in required shade. ii)12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two M.S. pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on M.S. tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with [Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site]. iii) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in M.S. pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. iv) One set of top frame with Double Finishing FRP Molded Plastic roof Top frame in MS tubular pipe of size 40 x 40mm properly with FRP molded sheet of 4mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14” Dia x 2mm thick at the central top for its beautification. Each sheet properly riveted to horizontal sheets complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. The complete item is fitting at site without C.C Floor and without sitting bench at site.

Providing and fixing of Victorian Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and rest 59” long total 12 Nos. is of MS rectangular pipe 65x25mm x 16 Gauge complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. @ Rs. 15000/- Each

Chain Swing (2seater): 10’L x 6’W x 8’.5 H. Horizontal frame and vertical legs is of M.S. pipe 2’’ x 12 gauge. It stays with M.S. pipe 1’’ x 12 gauge. Swinging seats-2nos is of FRP molded seat of 2mm thick fitted with M.S. pipe ½’’ frame x 12 gauge which hang with M.S. chain 6mm thick duly plated with ball bearing and M.S. flat 6mm thick housing. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site.

Wave slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of M.S. pipe 1’’ x 12 gauge and M.S. rectangular pipe 65 x 25 mm box x 16 gauge as climbing steps which support with 1’’.25 sq. pipe x 16 gauge. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site.

Sea Saw (4seater): - 8’L x 5’.5W x 15’ high. Frame is of M.S. pipe 2’ x 12 gauge. Sitting planks is of M.S. pipe 2’’ x 12 gauge and its cantilever and handles is of M.S. pipe ¾’ x 12 gauge. Sitting seats 4 nos. is of molded FRP material in 3mm thick with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, transportation, installation with C.C and labor at site.

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of M.S. pipe 2”, ¾” andamp: vertical ladder is of same material of 12-gauge ISI mark with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, Transportation, Installation with C.C and amp: labor at site.

Merry-go-round (4-seater): 5’ Dia. Main frame is of M.S. sq. pipe 2’’ x 2’’ x 14 G and having suitable handle andamp: foot-rest is of round pipe ¾’’ x 12 gauge. Central pipe is of M.S. pipe 3’’’x 12 G with heavy duty shaft 50mm thick andamp: ball bearing assembly. It consists of 4no chair made of molded FRP Plastic. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site.

FRP dustbin (tilting type) of capacity 60 Ltr. Body is made of moulded fiberglass re-enforced plastic (non – halogen fire retardant resign) of 2mm thick having its lid with handle. It fitted with m.s. square pipe 1.25” x 1.25” x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with Epoxy Primer INTERSEAL 670 HS and PU finish (Interthane 990) paints. Complete item with GST, Transportation, Installation with CC and labor at site.

Providing and fixing of Knee Chair complete as per specification

Providing and fixing of Double skier complete as per specification

Providing and fixing of Shoulder wheel complete as per specification

Providing and fixing of Back shaper complete as per specification

Providing and fixing of Air Walker complete as per specification

Providing and fixing of Abs shaper complete as per specification

Providing and fixing of the horse complete as per specification

Providing and fixing of Shoulder shaper complete as per specification

Providing and fixing of parallel bars complete as per specification

Providing and fixing of chest shaper complete as per specification

Providing and fixing of single skier complete as per specification

Transportation All items

Installation charges all items

Bidder Name

Amount

SANDEEP AUTO SPRINGS PVT LTD(GSTN-06AAICS7914G1Z7)

Anshul Bajaj Contractor(GSTN-06ANRPB0912C1ZL)

SUPER ENTERPRISES(GSTN-NA)

Sh.Devi Ram Contractor(GSTN-NA)

Anshul Bajaj Contractor

Sh.Devi Ram Contractor

SANDEEP AUTO SPRINGS PVT LTD

Sh.Devi Ram Contractor

SUPER ENTERPRISES

SANDEEP AUTO SPRINGS PVT LTD