PROVN OF UG CABLE, SECURITY LIGHT AC AT EME OL BARODA

Amount

Dismantling of cross arms / bracing supports / clamps / back plates or any structural sections including removing nuts, bolts, washers etc complete.

Dismantling of old deterioted ACSR conductor, of any size, any type complete.

Excavation in trenches nexc 1.5 mtr in depth for taking out cable / pipe line n.exc 10 sq mtr on plan and n.exc 1.5 mtr depth and getting out in soft/loose soil complete.

Returning filling in trenches excavated soil including spreading levelling watering and well ramming in layers n.exc 25 cm complete.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete.

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete.

M&L well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise complete

Supply. Laying, jointing and testing 120 Sqmm 3.5 core electric under ground LT cable PVC / XLPE insulated armoured aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles etc. complete

All as per Item No 08 above but for 95 Sqmm 3.5 core

All as per Item No 08 above but for 50 sq mm 3.5 core

All as per Item No 08 above but for 16 sq mm 2 core

All as per Item No 08 above but for 16 sq mm 4 core

All as per Item No 08 above but for 25 sq mm 3.5 core

M&L for GI tubing light grade 80 mm dia bore fixed on wall/pole laid in trenches/under road complete

All as per Item No 08 above but for 50 mm dia bore

S&F bracket with clamp for fixing street light fitting made out of 40 mm dia GI pipe light grade including bending to shape of length 1.5 m including necessar clamp, nuts and bolt etc complete -

S&F steel tubular swaged poles type 410 SP-31 (9 meter long) with CI base plate and finial taper plug, bolts, nuts & screws including PCC 1:4:8 type D2 as pad fdn & encashed to pole upto GL and PCC 1:3:6 type C1 as Coping all as per SSR pt I complete.

Supply, fixing, testing and commissioning in replacement for LED 72 Watt Street Light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device and similar to model HLSLD-ML04-72-CWL Make Halonixs complete.

M&L in replacement of flat aluminium, twin core, PVC insulated, overall PVC sheathed solid aluminium conductor service cable of 2.5 sqmm sizes complete.

S&F PVC Jnction Box of Size 20 x 20 x 15 cm with hinged door inculding locking arrangment with MCB SP 6 Amps 1 No including necessary clamp. Nuts, bolt etc complete.

S&F Cable jointing kit for 1.1 KV grade cable for straight through joint with jointing material (Epoxy Based) and accessories suitable for 3 ½ core XLPE armoured AL conductor cable of size 70 to 95 Sqmm complete.

S&F Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material (Epoxy Based) and accessories suitable for 3 ½ core XLPE armoured AL conductor cable of size 120 to 150 Sqmm complete.

S&F Cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material (Epoxy Based) and accessories suitable for 3 ½ core XLPE armoured AL conductor cable of size 25 to 50 Sqmm complete.

M&L for fabrication of bus bar chamber Comprising of 4 nos. Aluminium bus bar 200 Amp for phases & 100 Amp for neutral mounted on DMC / porcelain insulator support & suitable for 415 volts 3 phase 4 wire system with MCCB 63A 16 KA 4 pole, outdoor type, double door, with pedestal mounted, weather and vermin proof fabricated out of 3.15 mm thick MS CRCA sheet with anti corrosive coating & finally epoxy polyster powder coating of flint grey shade including 3 nos. phase indicating lamps, insertion of suitable cable glands for all incoming and out going cable including grouting of panel board 60 cm above & 30 cm below ground level duly supported on 50 x 50 x 6mm angle iron frame & welding 1.2 mtr long angle iron legs of size 50 x 50 x 6mm on all the four corners embedded in PCC 1:2:4 using 20 mm stone aggregate upto 30 cm depth complete.

M&L for fabrication of bus bar chamber Comprising of 4 nos. Aluminium bus bar 200 Amp for phases & 100 Amp for neutral mounted on DMC/ porcelain insulator support & suitable for 415 volts 3 phase 4 wire system with MCCB 125A 16 KA 4 pole, outdoor type, double door, with pedestal mounted, weather and vermin proof fabricated out of 3.15 mm thick MS CRCA sheet with anti corrosive coating & finally epoxy polyster powder coating of flint grey shade including 3 nos. phase indicating lamps, insertion of suitable cable glands for all incoming and out going cable including grouting of panel board 60 cm above & 30 cm below ground level duly supported on 50x50x6mm angle iron frame & welding 1.2 mtr long angle iron legs of size 50x50x6mm on all the four corners embedded in PCC 1:2:4 using 20 mm stone aggregate upto 30 cm depth complete.

Supply, installing, testing and commissioning factory made and tested LT feeder pillar box (KIOSK) outdoor type CPRI approved platform mounted, suitable for 415 volts 3 phase 4 wire , 50 Hz AC supply system having copper bus bar installed on DMC / Epoxy insulators & shall be dust and vermin proof, IP-65 class protection and made of 3.15mm CRCA MS sheet with front opening type with double door shutter and locking arrangement, powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface. The panel is embedded in platform of PCC 1:4:8 type D2 with 40mm crushed stone aggregate 20cm thick in foundation and of height 1.2 mtr above the nearest road level. The TPN copper bus bar of rating not less than the 1.5 times (260 Amps capacity) the rated capacity of the incomer MCCB with following accessories :-

(i) Incoming MCCB 4P 250 Amp, 35 KA -01 No

(ii) Outgoing MCCB 4P 100 Amp, 25 KA -04 Nos

(iv) Digital voltmeter & Ammeter with necessary CTs

(v) Internal wiring with PVC insulated, multi stranded copper conductor cable, 1100 V grade, IS 694 marked of approriate size but not less than 2.5 sqmm

(vi) Phase indicating LED lamps (R-Y-B) -01 set

(vii) Spare chamber for MCCBs - 01 Nos

Supply, installing, testing and commissioning factory made and tested LT feeder pillar box (KIOSK) outdoor type CPRI approved platform mounted, suitable for 415 volts 3 phase 4 wire , 50 Hz AC supply system having copper bus bar installed on DMC / Epoxy insulators & Panel shall be dust and vermin proof, IP-65 class protection and made of 3.15mm CRCA MS sheet with front opening type with double door shutter and locking arrangement, powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface. The panel is embedded in platform of PCC 1:4:8 type D2 with 40mm crushed stone aggregate 20cm thick in foundation and of height 1.2 mtr above the nearest road level. The TPN copper bus bar of rating not less than the 1.5 times (260 Amps capacity) the rated capacity of the incomer MCCB with following accessories :-

(i) Incoming MCCB 4P 160 Amp, 35 KA -01 No

(ii) Outgoing MCCB 4P 63 Amp, 25 KA -04 Nos

(iv) Digital voltmeter & Ammeter with necessary CTs

(v) Internal wiring with PVC insulated, multi stranded copper conductor cable, 1100 V grade, IS 694 marked of approriate size but not less than 2.5 sqmm

(vi) Phase indicating LED lamps (R-Y-B) -01 set

(vii) Spare chamber for MCCBs - 01 Nos

Supply, installing, testing and commissioning factory made LT feeder pillar box (KIOSK) outdoor type platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system having bus bar installed on DMC / Epoxy insulators & Panel shall be dust and vermin proof, IP-65 class protection and made of 2.0 mm Stainless steel SS-316 grade sheet with double door shutter and locking arrangement, front and back opening, using stainless steel hinges, bolts and nuts & washer etc. The panel is including platform with PCC 1:4:8 type D-2 with 40mm crushed stone aggregate 20cm in thick in foundation and of height 0.9 mtr above the nearest road level. The TPN aluminium bus bar of rating not less than the 1.5 times the rated capacity of the incomer MCCB with following accessories :-

(a) MCCB 4 pole 16 kA 63 Amps with tinned copper link 01 No (Incommer)

(b) MCB 4 pole 10 kA 32 Amp - 03 Nos

(c) Phase indicator lamps(R-Y-B) -01 set of three

(d) Automatic street light switch of rating 8 KW in three phase using nature sensor for automatic switching "ON / OFF" of steel lighting based on lux level of natural light along with 40 Amps Four pole contactor, MCB 40 Amps four pole with support terminals prewired with PVC insulated 25 sqmm multi strand copper wire enclosed / housed in pole wall mounted enclosure made of rust proof, shock proof, termite proof & dust proof FR grade moulded compound Junction Box & similar to 1. Model SWADEEP 02 EC 8KW 3P, Make Nature switch/Kaktiya Energy systems Pvt Ltd & 2. Circuit wiring : 02 Nos (Timers two Nos for each panel for different ciruits) complete

S&F MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete

S&F MCB TPN 4 pole 63 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete

S&F MCBs SPN 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete.

S&F MCB SP 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete.

S&F MCB DB SPN 04 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc. complete-

M&L for earthing with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 2.25 m below ground level connected to and including galvanised iron strip 32 X 6 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

M&L for Earthing with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 5 of 1991 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. NOTES: (i) The unit rate includes earthing wire and protection pipe up to 7.5 metre. (ii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends elbow shall be deemed included in the rates.

S&F LED Flood Light, 180 W Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting & similar to Make Havells, Model-JETAVALOURFLS180WLED757MODSYMLTG Complate.

Supply and install 1.5 TR hi wall split units indoor / outdoor with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating as per Bureau of energy Efficiency (BEE) labelling programme invertor type and EER 3.2 of capacity complete

M&L for Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type& designed for input variation between 170 Vto 250 V with output voltage stabilized at 230 Vwith accuracy of ± 2.5% and of capacity 4 KVA complete.

M&L for Sub main wiring with FRLS two runs single core PVC insulated and unsheathed FRLS multi stranded copper conductor cable 1100 volt grade IS-694, marked of 2.5 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling and one run of 2.5 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete. Note: Two runs of conductor and one run of cable as earth continuity conductor and conduit with accessories shall be measured as one length.

M&L for Sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6.0 Sqmm as current carrying conductor(two / three / four / five / six) single core 1100 V grade PVC insulated unsheathed FRLS cable with stranded copper conductor of nominal cross section area drawn into and including not less than 25 mm dia concealed/surface PVC non metallic rigid conduit of suitable size as per SSR Part-I and one run of 6 Sqmm as earth conductor PVC insulated unsheathed FRLS stranded copper conductor of nominal cross section area continous earth continuity wire complete. Note: Two runs of conductor cable and one run of cable as earth continuity conductor and conduit with accessories shall be measured as one length.

M&L for Sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 4.0 Sqmm as current carrying conductor(two / three / four / five / six) single core 1100 V grade PVC insulated unsheathed FRLS cable with stranded copper conductor of nominal cross section area drawn into and including not less than 25 mm dia concealed/surface PVC non metallic rigid conduit of suitable size as per SSR Part-I and one run of 4.0 Sqmm as earth conductor PVC insulated unsheathed FRLS stranded copper conductor of nominal cross section area continous earth continuity wire complete. Note: Two runs of conductor cable and one run of cable as earth continuity conductor and conduit with accessories shall be measured as one length.

S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket with one SP MCB 20 Amp complete

City Light

DARSHAN CONSTRUCTION Co.

Dagli Engineers

CENTAUR ENGINEERS

Harsh Infrastructure

ALBA AC AND REF SERVICES

Badri Electricals