Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-AOC KUPPUNNAN HOUSE KUNNAKKAVU | ₹3.5 L | 1 | Accepted-AOC LOWEST RATE ACCEPTED |
| 2 | Rejected-Technical | - | - | Rejected-Technical SECOND BIDDER |
| 3 | Rejected-Technical | - | - | Rejected-Technical THIRED BIDDER |
| Sl No | Description | Qty | Unit | ABDUL NAZAR MC L2 | YOOSAF KUPPUNNAN L1 | RATHEESH C L3 |
|---|---|---|---|---|---|---|
| 1.00Repair works to Ayur veda Hospital | ||||||
| 1.00 | OD520572/2025-2026:Dismantling damaged GI roof sheet, gutter, valeys etc, including stacking at a distances of 50m of all labor charges etc | 173.12 | sqm | 46.4 ₹8,032.72 | 42.75 ₹7,400.84 Lowest | 48.49 ₹8,394.54 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 134.13 | kg | 152.91 ₹20,509.82 | 140.88 ₹18,896.23 Lowest | 159.78 ₹21,431.29 |
| 1.00 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 98.45 | sqm | 664.38 ₹65,408.21 | 612.12 ₹60,263.21 Lowest | 694.24 ₹68,347.93 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 18 | metre | 461.91 ₹8,314.38 | 425.58 ₹7,660.44 Lowest | 482.67 ₹8,688.06 |
| 1.00 | OD422072/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 177.57 | sqm | 509.89 ₹90,540.66 | 469.79 ₹83,420.14 Lowest | 532.81 ₹94,610.54 |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 39.38 | kg | 691.54 ₹27,232.85 | 637.15 ₹25,090.97 Lowest | 722.62 ₹28,456.78 |
| 1.01 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | 35.34 | kg | 486.63 ₹17,198.96 | 448.35 ₹15,846.03 Lowest | 508.5 ₹17,971.92 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 50.49 | sqm | 1,045.41 ₹52,782.75 | 963.19 ₹48,631.46 Lowest | 1,092.4 ₹55,155.28 |
| 1.01 | OD424027/2025-2026:Engaging Coolie | 2 | Day | 884.66 ₹1,769.32 | 815.08 ₹1,630.16 Lowest | 924.42 ₹1,848.84 |
Tender Value
₹4.2 L
EMD Value
₹10,571
Closing Date
24 Mar 2026, 2:00 pmClosed
AE, Angadippuram GP
LID EW SECTION ANGADIPPURAM GRAMAPANCHAYATH
BUILDING REPAIR
2026_LSGD_847270_5
08/TEN/AE/AGPM/2025-26
Open Tender
Civil Works - Roads
Item Rate
180 days
Angadippuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹935
Yes
₹10,571
Yes
3 Jul 2026
13 Mar 2026
26 Mar 2026
13 Mar 2026
24 Mar 2026
13 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repair works to Ayur veda Hospital | |||||
| 1.001 | OD520572/2025-2026:Dismantling damaged GI roof sheet, gutter, valeys etc, including stacking at a distances of 50m of all labor charges etc | 0.6 | sqm | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.003 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | - | sqm | - | - |
| 1.004 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.005 | OD422072/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 0.6 | sqm | - | - |
| 1.006 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | - | kg | - | - |
| 1.007 | 21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron ) | - | kg | - | - |
| 1.008 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
| 1.009 | OD424027/2025-2026:Engaging Coolie | - | Day | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1431949.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
641nit.pdf
Tender Documents • 0.03 MB
641sbd.pdf
Tender Documents • 1.81 MB
BOQ_1431949.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .