REPAIR MAINT OF STREET LIGHTS AND OTHER CONNECTED WORKS AT LANSDOWNE LANSDOWNE KOTDWARA UNDER AGE I LANSDOWNE

Amount

Supplying and erecting in true vertical position steel tubular swaged pole, 8.5 meters long, type 410 SP-22, complete as per IS-2713 with MS iron base plate of 300mmx300mmx6mm with pole cap, finial taper plug , bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation 1:4:8 type D2, (using 40mm graded stone aggregage) and PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in plinth block, disposal of surplus soil to a distance not exceeding 50 mtr, painting two coats of aluminium paint over one coat of red oxide primer including tarring one coat on steel surface embedded in concrete and 05 Nos strips of 250mm height from coping comprising black & yellow paint in alternative layer complete all as specified and directed. Note:- Required earth work, PCC foundation will be paid separetly under relevant items of Sch A.

Supply, install and testing in repair LT Feeder pillar panel cubical outdor type made out of CRCA Sheet 3.00mm front hinged openable door including locking arrangement, platform mounted with angle iron 40mmx 40mmx 5mm frame work suitable for 240 volts grade three phase 4 wire 50 Hz AC Supply system, having bus bar chamber with suitable aluminium bus bar 100 Amp rating and accomodated with 63 Amp MCB TPN, with digital 24 Hr timer and making all necessay electrical connection complete, the box shall be dust and vermin proof IP-54 class protection alongwith in built short circuit protection confoms to IS/IEC 60947-4-1 complete all as specified and directed .

M & L laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminum stranded conductor of cross sectional area 25 sq mm 4 core including taking out the old unserviceable cable complete all specified & directed.

All as per Item No-3 above but 16 sqmm 4 core.

All as per Item No-3 above but 10 sqmm 4 core.

All as per Item No-3 above but 10 sqmm 2 core.

Supply and fixing bracket made out of 40mm bore, steel tubings, galvanised, light grade not less than 1.2 mtr long bend to shape with all fitting including fixed on pole with 02 Nos MS Clamp made out of F1 40x6mm complete all as specified and as directed.

Supply and fixing/laying 50mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

Fixing only in repairs new LED street/security light fitting 45W, including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from pole box to light fitting or from overhead conductor to light fitting complete all as specified and as directed by Engr-in-Charge. Note:- The LED street/security light fitting 45W complete shall be issued under Sch 'B' free for fixing.

Fixing only in repairs new LED street/security light fitting 60W including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from pole box to light fitting or from overhead conductor to light fitting complete all as specified and as directed by Engr-in-Charge. Note:- The LED street/security light fitting 60 W complete shall be issued under Sch 'B' free for fixing.

Disconnecting and dismantling old U/S pole box and S & F Loop in and Loop out FRP rectangular SMC junction box (Pole Box) front openable hinged from side of size 240x130x110 mm suitable for outdoor installation weather proof having 4 pole cable connector (for cable in and out junction) fixed inside box with insulator support and 01 nos MCB SP 06 Amp fixed inside box complete for street light fitting with mS clamps 40x5 mm GI nuts, bolts and washers complete all as specified and directed. Make of Box:- Sintax/Hensel/EPP Make of MCB:-L&T/Schiender/BCH/ABB

Fixing only in repairs LED flood light fitting 70/75 W, including fixed on pole of any type on existing angle iron with the help of nuts bolts washer including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from pole box to light fitting or from overhead conductor to light fitting complete all as specified and directed. Note:- The LED flood light fitting 70/75 W complete shall be issued under Sch 'B' free for fixing.

Fixing only in repairs LED flood light fitting 100W, including fixed on pole of any type on existing angle iron with the help of nujts bolts washer including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from pole box to light fitting or from overhead conductor to light fitting complete all as specified and directed. Note:- The LED flood light fitting 100 W complete shall be issued under Sch 'B' free for fixing.

Fixing only in repairs LED flood light fitting 150W, including fixed on pole of any type on existing angle iron with the help of nujts bolts washer including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from pole box to light fitting or from overhead conductor to light fitting complete all as specified and directed. Note:- The LED flood light fitting 150 W complete shall be issued under Sch 'B' free for fixing.

S&F LED driver with PF>0.95, input voltage 240 V AC, 50 Hz, input current 0.25 Amp AC, output voltage 42V-72V DC, output current 0.7A DC THD<10%, line volatge 140 to 277 V, IP 20 protection as per IS:15885(part-II section 13) suitable for LED street light of 25 Watt to 45 Watt outdoor dry and damp application after taking down the street light from pole/wall and refixing the street light on pole/wall (Size of driver should be as per sample given by EIC) complete all as specified and directed

S&F LED driver with PF>0.95, input voltage 240 V AC, 50 Hz, input current 1.6 Amp AC, output voltage 42V-72V DC, output current 0.7A DC THD<10%, line voltage 140 to 277 V, IP 20 protection as per IS:15885(part-II section 13) suitable for LED street/Flood light of 50 W to 90Watt outdoor dry and damp application after taking down the street light from pole/wall and refixing the street light on pole/wall (Size of driver should be as per sample given by EIC) complete all as specified and directed

Dismantling existing steel poles/ struts, any size, including necessary excavation & Earthwork, demolition of concrete etc. and removing the old unserviceable rubbish etc complete all as specified and directed.

Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5 m in depth for poles,laying under ground electric cable and GI tubing (where provided for protection of cables), stay and getting out, trimming the sides, forming bottom surface to required level in any type of soil complete all specified and directed.

Returning filling in any type of soil including spreading, levelling, watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus any type of soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning for under ground cable with layer of fine river dry sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. Note:- Punned (consolidated ) thicness of sand will be measured and paid.

Supplying and laying unreinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm ISI marked complete all as specified and directed.

M & L, PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in mass concrete/coping complete all as specified and directed.

M & L, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in mass concrete/foundation complete all as specified and directed.

M & L PCC 1:4:8, type D2, ( using 40mm graded stone aggegate) as in foundation and posts including caps and bases complete all as specified as directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4 mm GI wire as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size PCC 1:2:4 Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items.

Supply only 4mm dia GI wire complete all as specified and directed.

R P G ELECTRONIC REGD

Shikha Enterprises

PIONEER REFRIGERATION AND ELECTRICALS

M/S OM Enterprises