Strengthening of Road behind Birhana Road in Kanpur City

Dismantaling cement concrete or brick including stacking of dismantled material 1 as directed by engineer in charge within a distance of 60m.ch-17/697

scarifying the existing bituminous road surface and disposal of scarified material 2 with a lift upto 3m and lead upto 1000m as per specification. Mord 301.4(3.2)

Providing, laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to archive the desired density. Morth 406. WAA

Providing and laying in position machine batched and machine mixed design mix. M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying but including the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer in charge. (Note:-Cement content considered in this item is @ 330 kg/cum. Excess cement used as per design mix is not extra payable (All work upto Plinth Level) 5.33.1

Trimixing of CC pavement in M30 RMC including dewatering, application of hardner @ 2.5 Kg. per sqm.and finishing the pavement surface by mechanical floater, including labour, T&P etc all complete. (KDA sanction rate PMAY)

Groove cutting in C. C. Pavement slab of size 5mmx10mm including labour t&p etc complete as per attached quatation. (KDA sanction rate PMAY)

providing and laying in position bitumin hot sealing compound for expansion joint etc Using grade A sealing compound. DSR 2023 (factor 8.65 0.735 (112/107)=6.65)

Brick work with common burnt clay F.P.S. (non modular) bricks of class-150 in 8 foundation and plinth in: Cement mortar 1:4 (1 cement: 4 carse sand)

15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1) cement: 4 coarse sand) 13.5.1