Package No. TN- 5/3

Amount

2.2.1 Reinforced Cement Concrete Work Providing nd laying reinforced cement concrete work cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). (B) Super-Structure from plinth level upto 1st floor level. (i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. (N) Without using admixture, plasticiser (b) M20 or Prop. 1:1.5:3

(ii) Columns, pillars, posts struts, suspended floor, roof, landing, sheelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever,, staircase including preparing of top surface and furnishing and nosing. (N) Without using admixture, plasticiser (b) M20 or Prop. 1:1.5:3

2.2.3 Extra Over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

TIMBER SHUTTERING (FORMWORK) 3.1.1. Providing form work of ordinary timber planking…………4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in: 3.1.1.3 Columns, Pillars, Posts & Strut (b) Circular or curved in plan (using 38mm thick plank)

3.1.4 Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.1.1 & 3.1.3 (b).

3.2. PLYBOARD SHUTTERING (FORMWORK) 3.2.1. Providing form work of 12mm thick Plywood Board so as to give …………………….etc. 3.2.1.1 Columns, Pillars, Posts & Strut of Square/rectangular/Polygonal in plan or any shape like Tee/L etc. having plane vertical face

3.2.1.2 Sides and Sfifts of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M

3.2.1.3 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelevers slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

3.2.1.6 Vertical surface such as walls (any thickness),parapet walls, partitons and the like including attached pillasters, butresses, plinth and string courses and the like.

3.2.1.8 Staircase with sloping or stepped soffits including risers and stringers but excluding landing.

3.2.4 Extra for each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.2.1 & 3.2.3 (b).

4.1. BRICK WORKS 4.1.8 1st class brick wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level. (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4 (1 Cement : 4 sand).

4.1.14 Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B Wall

5.7. TILES WORK 5.7.3.1. Providing polished SUNROCK-Hi CTS/MULTIWYN tiles of approved quality, size, shape and thickness not less then 18mm on floors...................etc (b) MULTIWYN TILES Legato, Ribbera, Matrix, Esquire, Enigma, Flora, Little Flora, Nirvana, Purl, Contoura, Cobble, Canaletta, Nexus, Koral

5.9.1 MARBLE FLOORING 18mm thick marble stone slab flooring of sizes 12000 X 1200 includings treads and risers of steps, skirting, laid over 20mm thick base of cement plaster 1:6 (1 Cement : 6 Course Sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. (i) Dungri Slab

PLASTERING WORK 6.2.1. 10mm thick cement plaster in single coat on fair side of brick /concrete walls for interior plastering up to 1st floor level including arises , internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

6.2.2. 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises , internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) On roug side (b) In cement motar 1:4

6.2.5. Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stair up to 1st floor level (instead of plastering on walls) including curing complete as directed.

6.2.6 Extra over item no 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. (a) On single coat plaster

6.2.7 Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. (a) On single coat plaster

6.2.8. Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing completea as directed. (a) On single coat plaster

11. ALUMINIUM DOORS, WINDOWS AND OTHER WORKS WINDOWS AND VANTILATORS 11.1.3. Providing fittings and fixing colored anodised aluminium windows and vantilators of standerd sections of approved brand without horaizontal glazing bars joints mitred and welded (manufatured to relevent IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1.3.6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement and concrete to be measured and paid separately). (a) Side hung and Top Hung Windows and Vantilators (i) 6mm clear glass

(b) Fixed windows and vantilators (i) 6mm clear glass

ALUMINIUM FIXED LOUVER Providing fitting, fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) fixed louver having frame size 63.5mm x 38.10mm X 1.65mm, 50 x 2mm flat bar & louvers of size 77mm x 1.58mm with all necessary fittings and figures at all levels as per direction of Engineer-in charge.

13. PAINTING WORKS 13.3.5. Providings toe coats of J.K Wall Putty (White Cement base putty for concrete / mortar wall and ceiling both internal and extarnal)after removing all loosely adhering material from the wall surface with the help of emery stone , putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

13.4.1 wall painting (two coats) wit acrylic emulsion paint approved brand and manufacture (Asian Paint/ Berger Paint/ICI Paint/ J&N paint/Nerolac) on new surface to give an even shade after throughly brushing the surface free from mortar ndropping and other foreign matter and sand papered smooth. (a) AcrylicEmulsion paint approved brand and manufacture (Asian Paint/ Berger Paint/ICI Paint/ J&N paint/Nerolac)

13.9.3 Finishing Old/ new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish of sandex Matt brand of snowcem India Ltd. Of required shade after clearing and clearing the surfaces etc. including scaffolding complete as directed at all levels (two Coats).

STEEL & IRON WORKS 18.1.1. Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. Work / R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (upto 1st floor level). (a) From Primary Producer : TATA / SAIL /Esser Steel /Jindal Steel /Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar

18.1.2 Extra over item 18.1.1 (a.b.c) for each subsequent floor or part thereof above first floor level.

18.9. STEEL RAILING 18.9.1. Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels,plates etc. ,including welding, grinding, buffing, polishing and making curvature (wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolt etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge. (For payment, only weight of stainless steel member is to be considered . No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered).

SANITARY FIXTURES EUROPEAN TYPE WATER CLOSET 1.2. Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets , 40mm dia flash band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) (A) Parryware make/a) White/(vii) Niagara (Cat No. C0252) (inclusive of seat cover)

PVC FLUSHING CISTERN 1.5. Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standerd size CP flush pipe,union clamps etc. complete as directed and specified (pipes will be measured saparately) (i) Parryware make/a) White/(i) Economy Single Flush(Cat No.C8090/C8055)

URINAL 1.7. Providing fitting and fixing vitreous china flat back typed lipped front urinal basin of with automatic flushing cistern with standerd flush pipe and CP brass spreader andbrass unions etc. complete including paintings of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware make (a) White (i) Integrated EFS-Smart DC (Cat No.C8182) / Integrated EFS-Smart AC with power source (Cat No. C8195)

1.11 DIVISION PLATE Supplying fitting and fixing vitreous china division plate including fitting and fixing complete as directed and specified. (i) Parryware Make (a) White (i) Partion Magnum/ Large (Cat. No.C0571/07)

WASH BASIN 1.13. Providing vitreous China wash basin with Cl/MS brackets, C.P. brass chain with plug, PVC waste pipe including …………….etc 1.13.2 Basin (without pedestal) (A) Parryware Make (a) White (iii) tunga Basin 450 x 300 (Cat. No.C0401)

FITTINGS & ACCESSORIES MIRROR 1.18 Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm complete as directed and Specified.

SOAP TRAY, SOAP DISHLIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER 1.21 Providing, fitting and fixing recessed soap tray/ soap dish complete as directed and specified. (a) Parryware Make (ii) Wall soap tray (Cat. No. C9951)

TOWEL RAIL, TOWEL RACK & TOWEL RING 1.24. Providing fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (iv) Queen's (450mm long) (Cat. No.AQN7711A)

BOTTLE TRAP 1.33. Providing fitting and fixing chrome plated bottle trap complete as directed and specified. (a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat. No.ALD-769B

3.2. BIB COCK 3.2.1. Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified .(G.I. & C.P pipes will be measured separately) (ii) Jaquar make / (a) Continental / Clarion (i) Standered

3.5. PILLAR COCK 3.5.1. Supplying and fitting and fixing C.P. pillar cock of 15mm dia of approved brand as directed and specified. (ii) Jaquar make (a) Continental

PIPES & FITTINGS 1.37. PVC PIPES,BENDS,JUNCTIONS,TEES ETC. 1.37.1. Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joing fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.l. as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

(iv)75mm dia.

(b) concealed by chiselling or bracking brick wall/ C.C. / R.C.C and making good to the damages. (ii) 110mm dia.

(iv)75mm dia.

1.37.3 Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified . (b)Concealed by chiselling or breaking brick wall /C.C. /R.C.C. and making good to the damages (ii) 110mm dia

1.37.5 Supplying fitting and fixing PVC plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary completeat all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/ C.C./R.C.C and making good to the damages. (ii) 110mm dia.

1.37.6 Supplying fitting and fixing PVC single tee with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary completeat all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

1.37.7 Supplying fitting and fixing PVC single 'Y' of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary completeat all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C. / R.C.C and making good to the damages. (ii) 110mm dia.

1.37.11 Supplying fitting and fixing PVC Cross 'T' plain of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary completeat all levels including below G.L. as directed and specified. (b) Concealed by chiselling or breaking brick wall/C.C. / R.C.C and making good to the damages. (i) 110mm x 110mm

3.1. CPVC PIPES 3.1.6. Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having tharmal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the clamps at 1.00m spacing. This include joint of pipe. (A) Exposed and trenches (Vertical in shaft & Terrace) (c) 25mm nominal outer dia pipe

(e) 40mm nominal outer dia pipe

(B) Concealed pipe with cutting chases & making good the walls (a) 15mm nominal outer dia pipe

(b) 20mm nominal outer dia pipe

(c) 25mm nominal outer dia pipe

GRATING 1.40. Providing fitting and fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia

3.30. STOP COCK 3.3.1. Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. Pipes will be measured and paid separately) (i) Brass stop cock (heavy of Sant make (iv) 32mm dia

(v) 40mm dia

3.17. VALVE 3.17.2. Supplying and fitting ball valve as specified and directed. (a) 25mm dia. (gun metal)

3.17.3 Supplying fitting and fixing gun metal check valve including necessary threads to pipes. (b) 40mm dia (Heavy type)

SOAK PIT AND INSPECTION CHAMBER 1.52. Construction of inspection pit inside measurement 450mm x 450mm x 450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soiling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x 450mm air tight C.I. inspection pit cver and frame complete including supplying of materials, necessary excavation of pit as directed.

WATER TANK 5.4.2. Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of syntex / polycon /patton make over the stagging with manhole cover the locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (i) 2000 Lt. capacity water tank (b) Polycon make

SEPTIC TANK (50 USERS CAPACITY) EARTH WORK IN EXCAVATION 1.1. Earthwork in excavation for foundation trenches of walls, retaining walls , footing of column, steps, septic tank etc. including refilling (return filing) the quantity as necessary after competion of work , breaking clods in return filing , dressing , watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the exixting grounded level. (a) In ordinary soil

PLAIN CEMENT CONCRETE WORKS 2.1.1. Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separetely). (a) In prop 1 cement : 3 sand : 6 Coarse aggregate by volume

2.2.1. Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded ....................etc. (I) Using Mixture Machine. (A) In substructure up to plinth level. Foundation , footing, columns with base tie and plinth beam, pile cap, base slab, retaing walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. (N) Without using admixture, plasticiser. (a) M15 grade concrete or Prop. 1:2:4

(b) M20 grade concrete or Prop. 1:1:5:3

3.1. TIMBER SHUTTERING (FORMWORK) 3.1.1. Providing form work of ordinary timber planking so as to give a rough finishing including……....etc. 3.1.1.1 Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

PLYBOARD SHUTTERING (FORMWORK) 3.2.1.3. Flat surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

3.2.1.6 Vertical surface such as walls (any thickness),parapet walls, partitons and the like including attached pillasters, butresses, plinth and string courses and the like.

4.1.1 Providing soiling in foundation and under floor with stone / best quality picked jhama brick , sand packed and laid to level and in panel after prepareing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soiling.

4.1.4 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (i) In Sub-structure upto plinth level including dewatering if necessary (d) In proportion 1:6.

6.2.2 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises , internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing ccomplete as directed. (B) On fair side (b) In cement mortar 1:4

DSR-16 13.18 Neat Cement Punning

18.1. REINFORCEMENT 18.1.1. Supplying , fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C work/ R.B. walling including straighting , cleaning , cutting and bending to proper shepes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs spacers etc. complete. (No extra measurement for lap , hook , chair anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) (b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For assam Type Bldg., drain works, retaining wall & Boundry wall etc.)

MANHOLE COVER 19.18. Supplying and fixing C.I. cover without frame for manholes: 19.18.1. 455 x 610mm rectangular C.I. cover (light duty), the weight of the cover to be not less than 23k.g.

Electrical Works (as per estimate)

JABA BRAHMA