SPECIAL REPAIR TO BLDG NO P 10/M (ASC OFFRS MESS) AT ALHILAL MIL STN

Amount

SCHEDULE 'A' PART-I: Dismantling of plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50nlIn thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified.

Dismantling timber scantling 40 sqcm & over in section, any position in unframed work.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. ade Fe 410-W (Grade E-250)

S&F mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. 5.1161-1979 gradeSt.-240 complete

S&F mild steel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

S&F mild steel work as in wind ties for roof including securing bolts including necessary drilling bolting or riveting etc and similar confirming to FE 290 Gde E-165 complete as specified and directed.

Preparing new surfaces of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with including ceiling section (n.exc 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre, hangers 4mm dia GI (upto 1200 mm long length) adjusting level fixed in roof slabs be means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surfaces for any sunk and raised moulding over metal frame work and reinforced with G.I. wire mesh complete all as per manufacturer's instructions in position and design approved by GE complete all as specified and directed. Note: Metal frame work and G.I. wire mesh shall be measured and paid separately. Make:- Bison/Aerolite/Armstrong

S&F false ceilling at any height with size of tile 600 x 600 x 8 mm thick non asbestos fibre cement building boards fixed to laid / inserted GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with including ceiling section (n.exc 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre, hangers 6mm dia GI (upto 1200 mm long length) adjusting level fixed in roof slabs be means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia 40 mm long wth necessery finishing of POP complete all as specified and directed.

M&L in repair 4mm thick non asbestos fibre cement building boards fixed to laid / inserted to timber / GI / Aluminium frame work with screw complete all as specified.

M&L preparing new surfaces of ceiling and applying three coats of white wash complete as specified and as directed.

M&L second class hard wood as in timbers scantling fixed in clean sawn complete all as specified.

M&L second hard wood plain fillets, bull nosed, splayed chamfered or rounded on one edge sectional area exc 3 but n. exc 6 sqcm in wrought timber secured with nails to timbers frame work.

M&L preparing surfaces of wood & wood based materials new of any description & girth not other wise described & treated with two coats of creosote oil.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exc 1.5 sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified.

M&L 2nd class hard wood, solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put to gether with glue pinned at joints as directed

S&F mild steel hold fast & similar articles confirming to Fe-310-0 or Fe-410 complete all as specified.

M&L preparing surfaces of wood & wood based material new or old surfaces of any descriptiomn treating ends of posts, back of chowkats etc area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified.

M&L treating small articles such as hold fast with tar or coal tar black paint area n. exc 0.10sqm each complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (20mm graded crushed stone aggregate as in cills, bed plates, block for hold fast etc complete all as specified.

M&L preparing surfaces of wood & wood based materials new of any description & girth not other wise described & treated with two coats of creosote oil complete all as specified.

S&F 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed & skeleton shutters open rebated & prepare to received glass, gauge etc without sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred bids for securing glass etc in window, ventilator etc, sizes of member of shutter complete all as specified.

S&F 100mm long butt hings medium weight cold rolled mild steel & fixed to chowkats complete all as specified.

S & F 150mm long aluminium handle cast type anodised complete all as specified.

S&F 150mm long aluminium anodised barrel towe bolt of extruded section complete all as specified.

S&F Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete.

Preparing new surface of wooden of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18mm & fixed with tinned tacks are galvanized wire staples.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out suing extra cemebt using WPC as per manufacturing instruction.

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out suing extra cement.

Supply only liquid water proofing compound

M&L two coat of cement base paint over a coat of chalk whiting including preparation of new surfaces

M&L complete removal of existing treatment on old surfaces on walls two cement base paint over a coat of chalk whiting including preparation of old surfaces

M&L two coats of distermpering walls with distemper oil emulsion over a coat of chalk whiting on newly plastered wall surfaces including preparation of surfaces.

M&L two coats of oil bound distemper on old surfaces of walls including preparation of old surfaces.

M&L one coat of white wash on old surfaces of ceiling including preparation of old surfaces.

Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level)

Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed.

Forming Contraction (Dummy) joints 65mm deep x 10mmn wide,filled with sealing compoulld grade 'A' complete all as specified and directed.

M&L 75 mm thick PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate) thick as in foot path finishing the surface even & fair without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 300x 450x 7 mm/ 300X 600X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

Vitrified light shade ceramic tiles 10mm thick (square or rectangular) area of each tile not exc 0.36 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, with and including 15mm thick screed bed in CM 1:6, including Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified .

Dismantling of 75/100 mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors with clamp complete all as specified and as directed

Demolition of stone / brick / concrete block masonry built in Cement mortar complete all as specified.

M&L for providing precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

S&F 18 mm thick plywood grade BWR, type BB fixed with screws to timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete. Make: century/Kitply/GreenPly

Supply and paste 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions Make : Sunmica/Formica/century liminates

S&F Ist class HW plain fillets, square / rectangular, wrought face of sectional area n.exc 3 Sqcm, securing with screw complete.

S&F in repair Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F in repair Anodised aluminium Powder coating door shutters aluminium section weight of 0.55 kg/*m including necessory joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F in repair Anodised aluminium Powder coating window and ventilator shutters fixed type without sash bars, aluminium section weight of 0.55 kg/*m including necessory joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F 6.3 mm thick sheet glass ordinary quality coloured/ normal and glazing with oil putty in square n exc 0.50 Sqm in each panes.

SCHEDULE 'A' PART-II: Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.

All as per the description of serial item No 68 above but for 5 pin switch socket outlet 5 Amp on independent board complete all as specified.

All as per the description of serial item No 68 above but for 5 pin switch socket outlet 5 Amp on same board with other switches, complete all as specified.

Point wiring with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed.

Supply and fixing switch piano flush button types 5 Amp single pole one way complete as specified.

Supply and fixing Socket outlet 5 pin, 5amp, flush type complete as specified.

Supply and fixing socket outlet 2 in 1, 3 pin, 5 and 15 Amp, flush type universal Complete all as Specified.

Supply and fixing switch piano flush button types 15 Amp single pole one way complete as specified.

Supply and fixing bell push complete all as Specified.

Supply and fixing electronic bell ding dong type complete all as Specified.

S&F LED batten with LED rod complete T-8, 1x18 W including provn of flexible cable 3 core, 23/.0076 from ceiling rose to connector complete all as specified and directed.

Supply & fixing LED tube light fitting 1x8 W complete including provn of flexible cable 3 core of size 23/.0076 from ceiling rose to connector complete all as specified and directed.

Supply and fixing batton holder with LED 5 W complete all as Specified.

Taking down old unserviceable Wall bracket light any type/size, supply and fixing LED Wall bracket light complete all as specified and directed.

Supply and fixing regulator for fan 1200/1400mm sweep electronic type 230 Volt AC , 300 W complete all as Specified.

supply and fixing ceiling rose three terminal bakelite 65mm x50mm surface type complete all as specified and directed.

M&L sub main wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheated, multi-stranded, copper conductor, cable of two runs, 6 Sqmm for phase and neutral and one run of 6 Sqmm for earth wire, drawn through and including PVC casing and caping with all fittings like tee, bends, junction box/terminal box fixed on wall/ground/ceiling etc and connected complete all as specified and directed. Note :- Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. Two run of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length).

Supply and fix distribution board iron clad, vertical DB double door with IP-43 protection suitable for MCB TPN as incommer and MCB as outgoing 415 Volts 3 phase 50 Hz 4 way, complete with appropriate size copper busbar and neutral link complete with one MCB TPN 415 Volts 63 Amps rating, 16 KA breaking capcity of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site and including taking down old unserviceable existing DB any type/size complete all as specified and directed.

S&F sheet metal enclosures distribution board single pole and natural 12 way with 200 Amps rated bus bar 240 V, metallic double door IP-42 protection including taking out of old MCB DB of any type/size and removing from site to MES store for reuse if serviceable or for credit complete all as specified and directed.

Supply and fix MCB SPN 240 volts, 10kA, 50 Hz of capacity 40-63 Amps 'C' series all as specified and directed. .

Supply and fix MCB, SP 240 Volts, 6 to 32 Amps 10 KA, 'C' series complete all as specified and directed .

Supply and lay UG cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 35 sq mm 3.5 core all as specified.

Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5 m deep for laying of underground cable erecting of poles, stays and laying of under ground cables.

Returning and filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as directed.

Sub class 'B' brick, old size as cable protection cover, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to the length of the brick, complete all as specified and directed.

Sand cushioning to underground cable provided a layer of sand 8 cm before laying the cable and 15 cm after laying the cable. The top layer of 15cm shall be punned to 10 cm (total 18 cm) complete all as specified and directed.

GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with clamps, bore of pipe 40 mm complete all as specified and directed.

Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level, connected to 4mm dia galvanized iron wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete with 15mm dia light grade protection pipe, 20mm dia GI light grade watering pipe with funnel including char coal dust, salt, PCC 1:2:4 in pit with precast RCC M-15 cover reinforced with XPM not less then 4.00 Kg per sqm including necessary earth work in any type of soil, removal of surplus soil to a distance not exc 50m, returning filling in complete as shown in electrical plate No 3 of SSR Part-I (2009), and connected to earthing test point all as specified or indicated, including testing on completion. NOTE: The rates for earthing includes the cost of earth lead and protection pipe upto 7.50m length.

M/S DOGRA CONSTRUCTION CO

M/S THAKUR ENTERPRISES

M/S Bharmouri Construction

M/s. RAMESH KUMAR