CONSTRUCTION OF VOCATIONAL LAB AT KENDRIYA VIDHALAYA BANAR UNDER GE BANAR

Amount

M&L for Surface dressing n exc 15 cm deep in soft loose soil complete all as specified

Excavating in trenches, in hard dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.

M&L for Cement concrete type D2 (1:4:8) 40mm gradded aggregate in foundations, filling and mass-concrete complete all as specified.

M&L for design mix M-25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L design mix M-25 for Columns, pillars, piers, posts and struts complete all as specified.

M&L design mix M-25 for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for design mix M-25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas complete all as specified.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in fins facias complete all as specified.

M&L for formwork for rough finished surfaces of concrete chullah hoods, chajjas, troughs and similar items including edges complete all as specified.

M&L for formwork for rough finished surfaces of concrete fins, facias complete all as specified.

M&L for formwork for rough finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L for formwork for rough finished surfaces of concrete of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified.

M&L for formwork for rough finished surfaces of concrete of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified.

M&L for formwork for rough finished surfaces of concrete of sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

As per Ser No 18.00 above but 6mm to 8mm dia as in stirrups complete all as specified.

M&L for hard core of gauge n.exc 63mm , deposited,spread and levelled in layers n.exc 15 cm thick ,watered and rammed to a true surface using broken stone or boulders complete all as specified.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20 mm thick bedding layer in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone agregate over & including 75 mm thick sub base PCC 1:4:8 type D-2 over rammed earth complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including 15 mm thick in CM 1:3 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L white marble flooring 20-25mm thick for providing border, lining, skirting etc over & including 20 mm thick bedding layer in CM 1:4 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone agregate over & including 75 mm thick sub base PCC 1:4:8 type D-2 over rammed earth complete all as specified.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm thick , set and jointed 1:3 in neat cement slurry and pointed in white or coloured cement to match fix over & including 10 mm thick bedding layer CM 1:3 complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of priming complete all as specified.

S&F 35mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified.

M&L for fly ash brick masonry, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

M&L for flyash brick masonry, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified.

Rendering 10mm thick on fair faces of brick work or concrete surfaces to be finished even and smooth in CM 1:6 (without using extra lime or cement)

10mm thick rendering in over concrete surfaces of ceiling in CM 1:3 to be finished even and smooth (without using extra lime or cement)

Rendering 15mm thick on fother than fair faces of brick work or concrete surfaces to be finished even and smooth in CM 1:4 (without using extra lime or cement)

S&F box type steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded all as specified.

S&F box type steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars dovetailed or welded all as specified.

S&F box type steel ventilator with top hung shutters including hinges and steel peg stay, complete.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 4mm thick plain glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified.

Preparing new steel or iron surfaces of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S&F mild steel cold rolled butt hinges (medium weight) 100 mm long complete all as specified.

Supply and fixing aluminium handles, cast type, anodised 150 mm long complete all as specified.

S&F aluminium anodised, barrel tower bolts of extruded section, 200mm long complete all as specified.

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified .

S&F floor door stoper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (140mm length of cover plate) complete all as specified.

M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali primer complete all as specified.

M&L for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified.

M&L for Preparation new plastered surfaces of walls (plastered or unplastered) including applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces with one coat of alkali resistance primer on newly plastered surfaces complete all as specified.

S&F Vitreous China wash basin, white, flat back, size 550x 400mm including brackets, Waste fittings, brass, chromium plated etc. with long screwed shanks and fly-nuts, flange end bedded in cement complete all as specified.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

M&L for water proofing treatment of roof surfaces with 3 mm thick modified APP membrane weighing 3kg/sqm reinforced with polyster non wove fabric with one coat of bitumen primer @ 0.40 ltr/ sqm and one coat of bonding material using blown type bitymen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm over & including 10 mm thick plaster even and smooth (without using extra cement ) in cm 1:4 with wpc compound and finish top with 40 mm thick PCC padding (1:2:4) type B-0 (12.50 mm graded aggregate) complete all as specified.

Supply only WPC compound complete all as specified.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate. As in plinth protection complete all as specified.

S&F stop valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified.

S&F stop valve(Concealed) cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified.

S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S&F fancy type, chromium plated, pillar tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S&F gun metal gate valves with iron wheel head, srewed both ends for iron pipe and fixed complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm dia PVC (SWR) vent cowl complete all as specified.

S&F 75 mm bore PVC (SWR) Bends any radius complete all as specified.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks including fixing of 20mm bore float valve (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

S&F brass chromium plated tubular towel rail, 20mm dia, D type 60 cm long , fixed to wall with CP brass screw and PVC rawl plugs complete all as specified.

M&L for waste pipe 32mm dia complete all as specified.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade with grey cement and pigment complete all as specified.

M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core (1 run for phase + 1 run for neutral), PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth one light controlled by one, One-way switch complete all as specified. Note- (i) Cutting in chases and pointing in will be done by contractor without any extra cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.

All as per item Ser 79.00 No above but one fan point controlled by one, One-way switch complete all as specified.

All as per item Ser No 79.00 above but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified.

All as per item Ser No 79.00 above but one 5 pin 5Amp Socket outlet point on independent board complete all as specified.

All as per item Ser No 79.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

S & F piano flush type switch 5 Amps single pole complete all as specified.

S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps complete all as specified.

S & F switch socket combination 2 in 1,3 pin 6 &16 Amp flush type complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified.

S&F MCB SPN DB 12 way, double door, with 200 amp rated busbar 240 V complete all as specified.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F for MCB double pole of rated capacity 40 to63 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F LED lights fitting 1x 2W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fix Turbo heavy duty Metal body exhaust fan 300 mm sweep (1400RPM), 4 blade including louvers grounting with nut bolts complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified.

Supply and laying GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed of size 25 mm dia complete all as specified.

All as per item Ser No 95.00 above but 20 mm dia complete all as specified.

Supply and fixing Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete of size 25 mm dia complete all as specified.

Cutting /Drilling of CI/GI water pipe line of 50mm bore size and reducing for connection of 25/20mm bore GI pipe with fittings and other assessories complete all as specified.

M&L for clean, dry sand in trenches/ducts for cushioning to cable complete all as specified.

Supplying and laying PCC cable cover, flat, class LV, type 2 of size 300mm x 180mm x 40mm complete all as specified.

Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified.

Supply and lay galvanised light grade including fitting 40 mm dia with all fittings laid in trenches/floor complete all as specified.

Surendra Singh (BID ID -3081349)

Bhawani Enterprises (BID ID -3082426)

M/S DEWASI CONSTRUCTION CO (BID ID -3070637)