Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹86.6 L
EMD Value
₹1.7 L
Closing Date
19 Feb 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
HQ
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less crores; where; V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
GCC-2022, Clause-10.3; Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI. For tenders having advertised value more than Rs 20 crore wherein eligibility criteria include bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender. The available bid capacity shall be calculated as detailed in Annexure-VI.
Technical Eligibility Criteria: The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Construction/repairs/maintenance of any Civil Engineering Works.
58 conditions · 23 needing a document upload
All mandatory documents as per Provisions contained in Clause- 10, 14, 15, 16, 17 & 18 of Part I of General Conditions of Contract - 2022 as applicable are submitted.
Whether EACH PAGE of the copy of documents/certificates in support of credential is self-attested/digitally signed by tenderer/authorized representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement" as applicable, according to GCC along with all corrections slips from time to time and mentioned in the tender documents are enclosed with the tender.
Whether the Tender Form (First Sheet) in the tender documents is properly filled and submitted along with tender.
The tenderer(s) should submit the BID SECURITY in acceptable form i.e., only through net banking or e-payment gateway or submitted as Bank Guarantee Bond from a Scheduled Nationalized bank of India or as mentioned in the tender documents. The Bank Guarantee Bond shall be as per Annexure- VI(A) and shall be valid for a period of 90 days beyond the bid validity period. (NOTE: For submission of Bid Security in the form of Bank Guarantee, all the procedures mentioned at Para-5 Bid Security (3) (I) to (VIII) of GCC should invariably be followed.)
It is agreed that for Rs. 10 Lakhs & below composite work has to be carried out without any Electrical License. The Elect (G) portion work will be supervised by the concerned Elect(G) SSE/JE. For more than Rs. 10 Lakhs work, the Tenderer should have to submit self/supporting Electrical Contractor License (LT) issued by Electrical Licensing Board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of which should be submitted along with the tender offer. If tenderer fail to submit the supporting electrical license, the tender offer will be summarily rejected.
Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract. April-2022 Para 5(3) ii. Part I of GCC shall be read as under: Para 5(3) ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e., excluding the last date of submission of bids).
CLAUSE 6.1 of GCC 2022: The tenderer shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership firm/Joint Venture (JV)/Hindu undivided family (HUF)/ Limited Liability Partnership (LLP) etc., as the case may be. Non submission of above certificate (s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document.
Advanced Correction Slip No.2 of CLAUSE 6.1 of GCC 2022: The tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than company/proprietary firm, Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint venture(JV)/Hindu Undivided family (HUF)/Limited Liability partnership (LLP) etc,. as the case may be Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to dentify state and submit the supporting documents duly self attested/ digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
General Conditions of the Contract (GCC), 2022 is applicable to this contract.
Technical & financial eligibility Criteria as per GCC (works)-2022 or latest : Maintenance/ warranty period: after handing over the electrical assets, the same should be maintained for a period of 12 months before execution of electrical works, approval for supply materials should be obtained from Sr.DEE(G)/WAT or his authorized representative. The electrical works are to be executed as per the schedule of items & explanatory notes. as erected, drawings should be submitted by the contractor before passing the final bill. The payment terms & other conditions to be included as per the GCC.
As per Railway Board letter No: 2017/Trans/01/Policy, DT: 08.02.2018 if Multiple L-1: In case of more than one L-1 bidders, tender may be awarded to tenderer having higher Bid Capacity. In case Bid Capacity is also the same, tenderer having done more value of similar work in last three previous financial years and the current financial year up to the date of opening of the tender, may be selected for the award. Instructions with respect to Bid Capacity will follow. Hence, The Tenderer(s) shall furnish the details as per Annexure-VI.
Tenderer(s) are required to submit a copy of Permanent Account Number (PAN) along with the tender document.
Please submit any other document like ballast test certificate/ fabrication facilities/RDSO approvals as per specifications, if applicable as desired in the Annexed Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Tenderers have to fill in the details in TENDER FORM FIRST SHEET attached in the Documents Column and upload the same. Non-compliance with the conditions set forth therein above is liable to result in the tender being rejected. (Please Click on Tender Notice No. to go to Documents Column for "TENDER FORM FIRST SHEET").
Clause No. 14 of Part-I of GCC-2022 : 14. Documents to be Submitted Along with Tender (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Clause 14(a) (i) of GCC-2022 : (a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 14 (b) of GCC-2022 : (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 14 (c) of GCC-2022 : Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet).
Clause 14(d) of GCC-2022 : Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet). (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 14(e) of GCC-2022 : (e) Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 14(f) of GCC-2022 : (f) LLP (Limited Liability Partnership): (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 14 of GCC-2022 : (g) Registered Society & Registered Trust: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed. (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor. (NOTE : The participant tenderers have to comply with relevant clause applicable to them. The other clauses not applicable to the participating tenderers shall be mentioned as "CLAUSE NOT APPLICABLE").
Clause 15 of GCC-2022: 15. The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate.
Clause 16 of GCC-2022: 16. Employment/Partnership etc. of Retired Railway Employees: (a) Should a tenderer i) be a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, whether in the executive or administrative capacity or whether holding a pensionable post or not, in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, OR ii) being partnership firm / joint venture (JV) / registered society / registered trust etc. have as one of its partners/members a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, OR iii) being an incorporated company have any such retired Engineer of the gazetted rank or any other gazetted officer working before his retirement as one of its directors AND in case where such Engineer or officer had not retired from government service at least 1 year prior to the date of submission of the tender THEN the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. b) In case, upon successful award of contract, should a tenderer depute for execution of the works under or to deal matters related with this contract, any retired Engineer of gazette rank or retired gazetted officer working before his retirement in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, and now in his employment, then the tenderer will ensure that retired Engineer or retired gazetted officer had retired from government service at least 1 year prior to the date of his employment with tenderer and in case he had retired from service within a year then he possesses the requisite permission from the President of India or any officer, duly authorized by him in this behalf, to get associated with the tenderer. c) Should a tenderer or Contractor being an individual, have member(s) of his family or in the case of partnership firm/ company / joint venture (JV) / registered society / registered trust etc. one or more of his partner(s)/shareholder(s) or member(s) of the family of partner(s)/shareholder(s) having share of more than 1%in the tendering entity employed in gazetted capacity in the Engineering or any other department of the railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons. Note: -If information as required as per 16.a), b), c) above has not been furnished, contract is liable to be dealt in accordance with provision of clause 62 of the Standard General Condition of contract.
Clause 18.10 of GCC-2022 : 18.10 The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were/are partners/ members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para- 10 of the Tender Form (Second Sheet) of GCC.
Clause-5-GCC Bid Security:(1)(a)The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as specified in the tender, under the conditions of tender. The Bid Security shall be as under: For works estimated to cost up to 1 crore - Bid Security is 2% of the estimated cost of the work For works estimated to cost more than 1 crore - Bid Security is 2 lakh plus ½% (half percent) of the excess of the estimated cost of work beyond 1 crore subject to a maximum of 1 crore. Note: (i) The Bid Security shall be rounded off to the nearest 100. This Bid Security shall be applicable for all modes of tendering.(ii)Any firm recognized by Department of Industrial Policy and Promotion(DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above.(iii) Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above.(b)It shall be understood that the tender documents have been issued to the tenderer and the tenderer is permitted to tender in consideration of stipulation on his part, that after submitting his tender he will not resile from his offer or modify the terms and conditions thereof in a manner not acceptable to the Engineer. Should the tenderer fail to observe or comply with the said stipulation, the aforesaid amount shall be liable to be forfeited to the Railway.(c) If his tender is accepted, this Bid Security mentioned in sub Para (a) above will be retained as part security for the due and faithful fulfillment of the contract in terms of Clause 16 of the Standard General Conditions of Contract. The Bid Security of other Tenderers shall, save as herein before provided, be returned to them, but the Railway shall not be responsible for any loss or depreciation that may happen thereto while in their possession, nor be liable to pay interest thereon. (2) The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyond the bid validity period.(3)In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal(IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected.vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right-hand top corner of the envelope.
In continuation to BID SECURITY 3 of (i to vi): vii. The envelope shall be addressed to the officer and address as mentioned in the tender document. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder. Bid Security & Performance Guarantee should be in favour of Beneficiary, wherever it is applicable. Beneficiary: FA & CAO, Bhubaneswar, East Coast Railway, Payable at Visakhapatnam.
Provision of Modular Kitchen in Ty-V railway quarters in the section of SSE/W/South and 2) Improvements to DRM Office complex corridors in the section of SSE/W/HQ/WAT under the jurisdiction of ADEN/Estate/WAT.
eT-HQ-WAT-04-2026
eT-HQ-WAT-04-2026
Open
Works - General
6 Months
Visakhapatnam, Andhra Pradesh
₹0
₹1.7 L
24 Jan 2026
24 Jan 2026
5 Feb 2026
100 items across 5 schedules · ₹30,00,497.37 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 28 | 494.1 | 13,834.8 |
| 2 | Cost of carriage including loading, unloading & stacking for first 50 metres | cum | 25 | 227.18 | 5,679.5 |
| 3 | Area of slab upto 0.50 sqm | Sqm | 47.4 | 5,413.5 | 2,56,599.9 |
| 4 | Second class teak wood | cum | 2 | 1,42,949.7 | 2,85,899.4 |
| 5 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 16 | 2,600.45 | 41,607.2 |
| 6 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 12 | 3,167.95 | 38,015.4 |
| 7 | 20 mm dia | Metre | 90 | 393.25 | 35,392.5 |
| 8 | Fixed to steel windows by welding | Kg | 120 | 219.1 | 26,292 |
| 9 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 80 | 228.85 | 18,308 |
| 10 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 15 | 1,124.85 | 16,872.75 |
| 11 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | Each | 16 | 998.35 | 15,973.6 |
| 12 | 125x63x4 mm | Each | 60 | 126.65 | 7,599 |
| 13 | 250x16 mm | Each | 15 | 260.6 | 3,909 |
| 14 | 150x10 mm | Each | 30 | 82.55 | 2,476.5 |
| 15 | 125 mm | Each | 30 | 66.25 | 1,987.5 |
| 16 | Triple strip vertical type | Each | 15 | 52.5 | 787.5 |
| 17 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | ONE SET | 50 | 414.2 | 20,710 |
| 18 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). | Sqm | 25 | 5,207.45 | 1,30,186.25 |
| 19 | Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre). | Sqm | 18 | 8,543.6 | 1,53,784.8 |
| 20 | M.S. tube | Kg | 220 | 196.8 | 43,296 |
| 21 | Size of Tile 600 x 1200 mm | Sqm | 640 | 1,577.15 | 10,09,376 |
| 22 | Size of Tile 600 x 600 mm | Sqm | 45 | 1,464.85 | 65,918.25 |
| 23 | Size of Tile 600x600 mm | Sqm | 35 | 1,893.9 | 66,286.5 |
| 24 | Size of Tile 600x600 mm | Sqm | 20 | 309.05 | 6,181 |
| 25 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 30 | 3,186.7 | 95,601 |
| 26 | 110 mm diameter | Metre | 90 | 377.4 | 33,966 |
| 27 | 110 mm | Each | 18 | 136.15 | 2,450.7 |
| 28 | 110x110x110 mm | Each | 18 | 234.15 | 4,214.7 |
| 29 | 110x110x110 mm | Each | 18 | 221.35 | 3,984.3 |
| 30 | 110 mm bend | Each | 18 | 150.35 | 2,706.3 |
| 31 | 110 mm Shoe | Each | 18 | 131.85 | 2,373.3 |
| 32 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) | Sqm | 150 | 1,355.8 | 2,03,370 |
| 33 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) | Sqm | 480 | 36.1 | 17,328 |
| 34 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish | Sqm | 150 | 236.1 | 35,415 |
| 35 | New work | Sqm | 200 | 197.65 | 39,530 |
| 36 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. | Sqm | 250 | 96.1 | 24,025 |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 480 | 156.05 | 74,904 |
| 38 | Two coats | Sqm 317.26 | — | 137.45 | 43,607.39 |
| 39 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre | Sqm | 180 | 70.35 | 12,663 |
| 40 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | Sqm | 480 | 73.95 | 35,496 |
| 41 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 480 | 19.75 | 9,480 |
| 42 | One or more coats on old work | Sqm | 300 | 102.8 | 30,840 |
| 43 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 10 | 2,434.25 | 24,342.5 |
| 44 | In cement mortar | cum 13.33 | — | 2,060.2 | 27,462.47 |
| 45 | Of area 3 sq. metres and below | Each | 3 | 367.2 | 1,101.6 |
| 46 | Of area beyond 3 sq. metres | Each | 3 | 502.75 | 1,508.25 |
| 47 | For thickness of tiles 10 mm to 25 mm | Sqm 663.7 | — | 73.4 | 48,715.58 |
| 48 | Thickness above 40 mm up to 75 mm | Sqm | 10 | 433.55 | 4,335.5 |
| 49 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 480 | 54.65 | 26,232 |
| 50 | 20 mm nominal dia Pipes | Metre | 40 | 537.6 | 21,504 |
| 51 | P r o v i d i n g and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. | Sqm | 900 | 563.1 | 5,06,790 |
| 52 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by mechanical / manual means, including preparing and cleaning the surface for re-pointing/ refilling of joints, including disposal of rubbish to the dumping ground within 50 metre lead. | Sqm | 280 | 72.45 | 20,286 |
| 53 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. | Sqm | 800 | 338.25 | 2,70,600 |
| 54 | Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). | Sqm | 800 | 211.05 | 1,68,840 |
| 55 | Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). | Sqm | 800 | 77.9 | 62,320 |
| 56 | Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding). | Sqm | 980 | 374.3 | 3,66,814 |
| 57 | Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in- Charge (The rate is inclusive of all materials & labours involved except scaffolding). | Sqm | 980 | 329.05 | 3,22,469 |
| 58 | 50mm average thickness | Sqm | 480 | 256.35 | 1,23,048 |
| 59 | Upto and including 12mm dia. | Each | 880 | 141.2 | 1,24,256 |
| 60 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Sqm | 380 | 285.2 | 1,08,376 |
| 61 | Epoxy injection grout in concrete/RCC work of approved make | Kg | 200 | 553.4 | 1,10,680 |
| 62 | Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. | Each | 900 | 236.9 | 2,13,210 |
| 63 | Filling of joints between RCC plinth beam / floor slab and wall panel of external walls, toilet / bath room / wet areas walls on all floor and parapet wall over roof slab, stair case head room at the time of erection of GFRG panels with Grout RW/equivalent sealant compound after the erection of panel before the infill of concrete in panel cavities and fine finish. This applies for all horizontal and vertical joints between GFRG wall and slab panels. | Metre 1480 | — | 49.3 | 72,964 |
| 64 | Frame size 65 x 100 mm | Metre | 30 | 1,111.3 | 33,339 |
| 65 | 30 mm thick | Sqm | 12 | 4,764.2 | 57,170.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
JPO-Circular-GuidelinesforprotectionofCables.pdf
ATTACHMENT
SpecialConditionsforCivilWorks.pdf
ATTACHMENT
SpecialConditionsCementandSteel.pdf
ATTACHMENT
INSTRUCTIONSTOTENDERERSNEW6months.pdf
ATTACHMENT
BidSecurityBond_.pdf
ATTACHMENT
CompositetenderElectricalGconditions_c.pdf
ATTACHMENT
Boardletter-GraduateEngineer-DiplomaEngineer_.pdf
ATTACHMENT
AnnexureVI-B_.pdf
ATTACHMENT
GCC-2022_.pdf
ATTACHMENT
GCC-2022-ACS-1to10_.pdf
ATTACHMENT
AnnexureVandVAmodified.pdf
ATTACHMENT
TenderFormFirstsheetNEW.pdf
ATTACHMENT
Anx-I-GuaranteeBond.pdf
ATTACHMENT
EFTFORM.pdf
ATTACHMENT
ELECTRICALSPECIALCONDITIONSRECENT2026.pdf
ATTACHMENT
MAKESANDSPECIFICATIONS.pdf
ATTACHMENT
Annexure-VI.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .