MISCELLANEOUS REPAIR TO JOINERY, ROOF SHEETING, FALSE CEILING, PLASTERING ETC OF OTM ACCOMMODATION IN NORTH ZONE AND MES COMPLEX UNDER GE (NORTH) BINNAGURI

Amount

Taking down Chowkats or frame exc 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the frame each including Builder's Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed.

Taking down chowkats or frames n.exc 1.5 Sqm (without taking off shutter from the frame) each and including Builder's Hardware removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm and n.exc 2.00 Sqm each including Builder's Hardware and removing from site complete all as specified and as directed

S&F of pressed steel framed for door confirming to relevant IS with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm and 1.25mm thickness, including one shop coat of primer complete all as specified and as directed

S&F factory made pressed steel frames confirming to relevant IS, having profile of size 105 x 60 mm, 1.25 mm thick MS Sheet for doors with one or more rebates including necessary Supply & fixing lugs, lock strike plate, etc. 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chemically pressure treated complete all as specified and as directed

S&F for factory made 30mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

S&F of factory made 30mm flush shutter, machine pressed architects veneer designer ply lam both side flush door shutter solid core construction with block board core including 5mm thick teakwood lipping around complete all as specified and as directed

S&F for framed work such as grills, gratings found bars, for fly proof door shutter etc. with ends of bars, hollow sections shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and prelam PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile and rails feathered at edges; paneling of Prelam PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable prelam PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction complete all as specified and as directed.

S&F of stainless steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F of aluminium handles cast type anodised 150mm of size complete all as specified and as directed.

S&F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long Mild steel pressed handles, D type, stove enameled black complete all as specified and as directed.

S&F in repair Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

Dismanting of steel window and ventilator of any description and size including grill/guard bar complete all as specified and as directed

S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri zone Drg No. CESZ/2018/TD-07, sheet 1/3 to 3/3 with double shutter i.e. glazed and wire gauged shutter including all fittings and fixtures like MS hold fast, box type hinges, handles, MS tower bolt, stopper, MS guard bar/grill etc complete including one shop coat red oxide primer complete all as specified and as directed. Notes:- (a) Window with double shutter i.e. glazed shutter & gauged shutter with all fittings & fixtures shall be measured as one unit and no extra shall be measured and paid separately. (b) Glass, MS guard bar/grills, wiremess and painting only shall be measured and paid separately under relevant items.

S&F aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed

M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F figured glass, pin head type 5 mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan and exceeding 6m plain exc mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down wall panelling and similar work complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for applying average 20mm thick plaster in two coats (10+10mm) with ready-mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces additives on top layer of external surfaces including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only. Name of Manufacturer : M/s ACC Accoplast/M/s Premier Floor to Roof Materials Pvt Ltd/ M/s Ultratech Cement Ltd /M/s Sound Builder care Pvt Ltd or other techno commercially equivalent makes as approve by the GE.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for preparation new internal wall surfaces with one coat wall putty and applying two coats of distemper acrylic emulsion over one coat of primer complete all as specified and as directed.

M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour complete all as specified and as directed.

M&L for one coat of white wash on old surface of wall with brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for one coat of white wash on ceiling of old surface with include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and using 15 mm thick using cement mortar 1:6 complete all as specified and as directed.

M&L for DIGITAL ELEVATION TILES of size 300x450 x 7-8mm/300x600x7-8mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed. Make: Johnson/Kajaria Notes for Item No. 47 to 51:- (a) The rates include for all straight cutting and waste including raking or circular cutting and waste complete. (b) All corners in wall tiling should be properly metered jointed to give monolithic uniform appearance. (c) Design/pattern of vitrified tile flooring shall be as approved by Engineer-in-Charge/GE. (d) The rates for tiling includes for laying to any pattern with one or more colors as directed. (e) If tiles of different sizes are used then no price adjustment shall be made.

S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed.

M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 1st quality double charged/ultra charged Vitrified Ceramic tiles dark shade 7-8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm in skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (20 mm graded aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for 75mm thick PCC 1:4:8 type D-2 as in sub base using 40mm graded mechanically crushed stone aggregate complete all as specified and as directed.

M&L for providing and laying of 300x300 mm/200 x 200 mm & 10mm thick anti-skid pavement tile endura vitrified tile of "H & R Johnson India" or equivalent in pavit or NITCO as approved by the GE in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note: Design/pattern shall be as approved by GE at the time of exaction.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of size 300 (L)x100 (T)x300(H)mm in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage(cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I complete all as specified and as directed.

S&F in repairs of ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and as directed.

S&F in repairs 15 mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm dia concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe complete all as specified and as directed.

S&F in repairs of brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75MM/100mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F ceramic under counter wash hand basin glossy finishes, size 22x16x8 inch size including CP waste coupling, PVC connection 450 mm long, waste pipe and removing the existing basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, capstan head, cast copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap tand flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including P or S trap, complete all as specified and as directed.

M&L for PVC water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of required length etc complete all as specified and as directed

S&F in repair vitreous china half stall type urinal with grating and union for discharge pipe including connecting pipe & waste pipe with coupling, Urinal Spreader complete all as specified and as directed.

S&F in repair 15 mm dia brass chromium plated angle cock with flange complete all as specified and as directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed.

S&F stainless steel towel ring and including Chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F of polycarbonate wall mounted soap dish fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F CP Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections, fixing in pipe etc and fixed in position complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, and railings, newels, balustrade & the like complete all as specified and as directed.

Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Dismantling of Plain or corrugated, steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour aving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n.exc 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC as per manufacturer's instruction in order to maintain proper slope over existing roof surfaces for applying, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item of this schedule.

M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc complete all as specified and as directed.

M&L for waterproofing Coating with polyurethane based water proofing liquid membrane of approved make to be applied by brush with multi coats with minimum dry film thickness of 1 mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note: The above treatment will be carried out by authorised applicator of approved firm/company.

Demolition of wall and ceiling board (Fibre, pulp, insulation etc.) or insulation board /slab/blankets any thickness including cover fillets complete all as specified and as directed.

M&L for Gypsum board 12 mm thick (Gyproc) for seamless false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction complete all as specified and as directed.

S&F for gypsum board 12 mm thick cornices up to 100 mm wide along the false ceiling on vertical surfaces fixed with cadmium plated screw, design as approved by GE complete all as specified and as directed.

M&L applying two coats of plastic emulsion paint on wall/ceiling surfaces of any description over 10 cm girth or width not other wise described over a coat of primer over two coats of wall care putty complete all as specified and as directed.

S&F for false ceiling with Gl powder coated frame work and 4 mm thick,(E-board) non asbestos fibre reinforced cement board, reinforced design board tiles conforming to IS-14862,of approved texture at aii height duly suspended ceiling laid on hot dip galvanised iron imposed dried of size 600 mm x600 mm ,T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details. (a) 27mm x 27mm angle 0.55 mm thickness,GI powder coated hot dip galvanized plugged at the rate 600mm centre to center along with te perimeter of wall. (b) 25 mmx 25 mm Tee 0.55 mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc 1.2 mtr length) with adjustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre along with the perimeter of wall. Note : The work shall be carried out as per manufacturer instruction and as directed.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly one light controlled by one, one way switch complete all as specified and as directed for the following :-

All as per item No 104 here in before but for one ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item No 104 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No 104 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item No 104 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.

All as per item No 104 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.

S&F bell push fush type 5 Amp 230 Volt complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F switch socket combination 2 and 3 Pin, 5/6 Amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed. Make: Anchor Penta / Havell's Reo

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F in repair switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.

S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F in repair switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and as directed.

S&F in repair of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F in repair deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F in repair call bell ding dong, 230 Volt single phase complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in repair modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F in repair modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down of old existing one complete all as specified and as directed.

S&F recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including taking down of old existing one complete all as specified and as directed.

S&F of decorative wall light fixture made up of polycarbonate suitable for 10 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F bollard 10 watt LED light fitting pyramid tripod type, IP 65,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable and necessary foundation/mounting arrangements including taking down of old existing one complete all as specified and as directed.

S&F of bulk head luminaire with B22 base holder suitable for 9 Watt LED inverter type bulb light IP66 grade, with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non-metallic concealed conduit of suitable dia with and including taking down unserviceable sub main complete all as specified and as directed. Note: Two runs of sub main wiring cable along with one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

S&F in replacement sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unserviceable sheet metal enclosure complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including removal of old unserviceable sheet metal enclosure complete all as specified and as directed.

S&F in replacement MCB, triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection including taking down of old existing one complete all as specified and as directed.

BIG BEN ENTERPRISES

MESSRS SEN BROTHERS

M/s. MD IRSHAD

P CHAKRABORTY CONSTRUCTION