Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC | L1 | Accepted-AOC Accepted for acceptance being lowest. | |
| 2 | L2₹41.5 L+₹19,845.67 (0.48%)Rejected-Finance 05 AYODHYA NAGAR NEAR RAM MANDIR BEHIND HARIYA COLLEGE GOKUL NAGAR JAMNAGAR 361004 | JAMNAGAR | JAMNAGAR | GUJARAT | 361004 | L2 | Rejected-Finance Not L1. | |
| 3 | L3₹42.7 L+₹1.4 L (3.33%)Rejected-Finance AIR FORCE ROAD DHINCHADA JAMNAGAR 361 009 | JAMNAGAR | GUJARAT | 361009 | L3 | Rejected-Finance Not L1. | |
| 4 | L4₹43.5 L+₹2.2 L (5.42%)Rejected-Finance | L4 | Rejected-Finance Not L1. | |
| 5 | L5₹43.9 L+₹2.6 L (6.23%)Rejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | L5 | Rejected-Finance Not L1. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jamnagar No.2
Air Force Station No.2, Jamnagar - 361 004
REPAIRS TO JOINERY, ROOF, CHAJJA, FACIA AND THEIR CONNECTED ITEMS IN SMQ AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2
2022_MES_550288_2
8377/E8
Open Tender
Miscellaneous Works
Item Rate
300 days
Jamnagar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No.2
₹90,000
Yes
24 Nov 2022
13 Oct 2022
4 Nov 2022
13 Oct 2022
3 Nov 2022
20 Oct 2022
Amount
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed.
Taking down chowkats or frame with shutter (with out taking off shutter from the frame) .exc 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed.
S & F IInd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S & F 35 mm thick IInd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered sorrounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters complete all as specified and directed.
S & F 30mm thick IInd class HW Glazed and skeleton windows, ventilators, etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24 (b) complete all as specified and directed.
S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt 100mm long and Aluminium handle 150mm long complete all as specified and directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm to wooden / iron / aluminium frame with wooden / iron / aluminium beading and fixed with nails / nut & bolts or wire staples complete all as specified and directed.
S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty / rubber beeding and screw in Sqm n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick figured glass pin head type glazing with oil putty n.exc 0.50 Sqm in each pane fixed to wooden / metalic frame complete all as specified and directed.
Welding in repairs over metal / steel surfaces of any thickness exc 2.5 cm & n exc 5 cm in length complete all as specified and directed.
M & L for 100mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
M & L for 75mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
S & F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.
S & F 100mm long aluminium handle fabricated type anodised complete all as specified and directed.
S & F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.
S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repair 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repair for mild steel butt hinges medium grade 100 mm size complete all as specified and directed.
S & F in repair for mild steel butt hinges, medium grade 75mm size complete all as specified and directed.
S & F in repair 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F in repair 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.
S & F in repair 25 mm dia Curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc. decorative type complete all as specified and directed.
Fixing only existing Curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc. decorative type complete all as specified and directed.
S & F Mild steel hold fast and similar works fabricated with mild steel section conforming to Fe-290 Gde E-165 complete all as specified and directed.
M & L for PCC (1:3:6) type C1 (using 20 mm graded stone Aggregate) for fixing hold fast including necessary formwork, complete all as specified and directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.
M & L for rendering 15 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth without using extra lime or cement complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of chalk alkali resistant primer complete all as specified and directed.
M & L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of Synthetic Enamel paint complete all as specified and directed.
M & L for preparing old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.
S&F in repairs Hasp and staple 75mm size, of aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.
S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B
M & L Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F in repairs 40mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking down of aluminium / glass / toughen glass shutter complete all as specified and directed.
Resecuring or easing & adjusting without taking down the shutter of any description exc 1 sqm and n.exc 2 sqm in same opening complete all as specified and directed.
Resecuring or easing & adjusting without taking down the shutter of aluminium/metalic shutters exc 1 sqm and n.exc 2 sqm in same opening complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails
S & F in repairs 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frme work or ply wood complete all as specified and directed.
M & L 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S & F 75mm size SS cup board hinges medium weight cold rolled complete all as specified and directed.
S & F Magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed.
S & F mortice lock vertical type (Brass) fixed to cupboard size 75 mm 4 levers complete all as specified and directed.
S & F 50mm dia, polished, hard wood cupboard knobs fixed with screws complete all as specified and directed.
S & F in repair brass Hat and coat hooks, solid body, 175mm to 250 mm of minimum 05 hooks complete all as specified and directed.
M&L for anti-termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
Removal of existing roof treatment consisting of screed bed, tar felts etc, and removal of debris outside MD land complete all as specified and directed.
M&L for rendering 10 mm thick on concrete surface whilst the concrete is green, in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and directed. Note: WPC will be measured & Paid separately.
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on brick work / concrete surfaces / PCC block / stone masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement Base paint over a coat of alkali resistant priming paint complete all as specified and directed.
Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.00 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and directed.
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed.
M & L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) as in flooring as a leveling coarse cement concrete surface complete all as specified and directed.
S & F Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished with mixture of white and grey cement in equal proportions and no pigments, and including 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes complete all as specified and directed.
M&L for ceramic tiles mat finish 300 x 300 x 10mm factory made, set and jointed and pointed in cement slurry in floor and cut to shape, size over 15mm the screed bed in CM 1:4 etc complete all as specified and directed.
Supply only liquid water proofing compound
Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down steel water tubing and connection 15mm dia bore and removal from site.
Taking down steel water tubing and connection 20mm dia bore and removal from site.
Taking down steel water tubing and connection 25mm dia bore and removal from site.
Supply and laying of GI 15 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Refixing of old GI 15 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Supply and laying of GI 20 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Refixing of old GI 20 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Supply and laying of GI 25 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Refixing of old GI 25 mm Tubes, medium grade, galvanised, with all fitting; laid in trenches fittings on walls in any type of masnory or laying in floors complete all as specified and directed.
Disconnecting existing tanks exc 500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing, etc. complete all as specified and directed.
Taking down rain water / drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
M&L for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface,cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding, formwork etc up to 9 Mtr heigh and applying 10 mm thick rendring in cement mortar 1:3, finishing the surface even & smooth with out using extra cement complete all as specified and directed. Note: Reinft will be paid separately.
M & L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Dismantling water tanks of capacity exc 250 and n.exc 500 litres and removing to store complete all as specified and directed.
S&F 500 litre capacity, rotational moulded polythere water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and directed.
M&L for providing and injecting chemical emulsion for post constructional Anti Termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 Cement : 2 Course Sand) to match the existing floors complete all as specified and directed.
M&L for anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortal 1:2 (1 cement : 2 course sand) to match the existing floors complete all as specified and directed.
Notes : (a) Contractor to supply one carpenter and one plumber with necessary helper to report to the concerned JE in morning by 0900 hrs to attend the necessary repair and complaints failing which necessary recovery of Rs.1000/- per day will be effected. (b) Ratesfor above shall be inclusive of rates quoted by the contractor against BOQ / Schedule 'A' items. No extra payment in this regards to be made to the contractor.
KEVAL ENTERPRISE
R.H.ENTERPRISE
Honest builders
JAMNAGAR ELECTRIC AND MACHINERY CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .