Loading
Loading…
Loading…
Tender Value
₹2.6 L
EMD Value
₹5,180
Closing Date
30 Jun 2026, 4:00 pm7d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer PHE Division Kargil
Executive Engineer PHE Division Kargil
Refurbishment/repairing of existing 3-phase induction motor 270 HP vide motor serial no (Kirloskar) and supply, installation of mounting and accessories at water lifting station stage 1st near Khree sultancho stadium Biamathang Kargil. (Under Re-act
2026_PWD_19079_1
E-tender- 35 of PHE Division Kargil of 2026-27
Open Tender
Pumps/Motors
15 days
Baroo
Refer to NIT
3 documents required · 3 mandatory
₹26
Payable To Executive Engineer PHE Division Kargil
₹5,180
17 Jun 2026
17 Jun 2026
1 Jul 2026
17 Jun 2026
30 Jun 2026
17 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Extraction of 3-phase induction motor from base, Disconnect the electrical wiring from the terminal box, Decoupling/ Remove the coupling or pulley from the motor shaft to disconnect it from the driven machine. Loosening Nuts/Bolts Loosen the foundation nut and bolt assemblies using appropriate wrenches. If foundation bolts are rusted, use penetrating oil or a gas cutter to remove them, replacing them later. Lifting Secure the motor with lifting aid/ slings and lifts it off the base. Move to a safe, clean, and dry area for refurbishment. Complete job in all respect including servicing of all required components. | - | Job | 25,000 | - |
| 2 | Providing/Replacement of Drive End (DE) and Non-Drive End (NDE) Bearings (typically high-load roller bearings): Deep groove ball bearings, high speed (e.g., ZZ shielded type, or open type for larger frames). (BRG.DE/NDE 6319) Make SKF, NSK. | - | Nos | 27,500 | - |
| 3 | Providing and applying of High-quality pleurae -thickened grease with a base oil viscosity of approximately at (NLGI Grade 2) for most 3-phase induction motors, such as Mobil Polymer EM | - | Job | 2,000 | - |
| 4 | Providing and fitting of NRV 6 inc PN 16 (150mm) Make: L & T, Kirloskar. | - | Nos | 17,000 | - |
| 5 | Providing and fitting of gate valve PN 16 6 inch (150mm) Make: L & T, Kirloskar. | - | Nos | 14,600 | - |
| 6 | Providing and fitting of gate valve m 32 mm Make: L & T, Kirloskar | - | Nos | 5,700 | - |
| 7 | Providing & welding of raised face MS flange 8 mm, 150 mm dia 6 holer 10 no's, EDPM /neoprene gaskets 20 no's Nut and bolts of compatible dia & length (super screws, pioneer Nuts & bolts Pooja, Forge) 15 Kg approx. Complete job in all respect. | - | Job | 13,500 | - |
| 8 | Providing and fitting of lockable selector switch/Main Breaker Handle Make: HPL (630 Ampere). | - | Nos | 4,000 | - |
| 9 | Providing of chain pulley block 05 ton (Make Bajaj Indef, Brady & Morris, Rudra, Kepro Technology Pvt ltd) including of fabrication of telescopic tripod out of 75mm, 65 mm Gi pipe for a max height of 15 ft. Complete job. | - | Job | 25,000 | - |
| 10 | Supply installation of 75 mm Cl gate valve (02 no's), 75 mm Cl foot valve (02 no's) and split case centrifugal pump Kirloskar pump type/RKB50/15 L6 & Sr. no 11330180187 mechanical seal (02 no's) | - | Job | 48,000 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.16 MB
BOQ_45485.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid