Construction of ACR at Middle School Mashoona

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed.

P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.)

Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for mass concrete.

Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Treated Bars) Incl. carraige and head load.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand).

Extra for brickwork in superstructure

Formwork ,Centring and shuttering including strutting proping and removal of same for suspended floors, roofs, landings, balconies and acces.

Formwork ,Centring and shuttering including strutting proping and removal ofLintel, beams, plinth beams, girders, bressumers and cantilevers(Floor beam).

Providing and fixing wood work in frames of doors windows clestory windows wrought frame and fixed in position of Kiln seasoned and chemically treated hollock wood.

Structural steel welded in built up sections, trusses and frame work, soffits & Eaves Boarding thick etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of colour profile high rib G.S Sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen GI limpet washers with GI limpet washers filled with white lead and incl cost of approved steel primer and two coats of paint on overlapping of sheets complete .50 mm thick zinc coated not less than 27.5 gm/sqm .

P/F of ridges hip of coloured CGI sheets 0.5 including cost of nails and washers all complette job.

Providing and fixing of 40x5 mm iron hold fast 40 mm long including embedding the same in cement concrete 1:2:4.

12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand).

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade incl priming coat of wooden primer.( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer ) .

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete(Size of tile 600x600 mm).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.21.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws(30mm thick).

Providing and fixing of glass panes 3.5mm including cost of beading and nails all complete job.

Providing and fixing of hardware items of good quality(bright finished brass) including cost of screws all complete job.

Handles 125mm

Handles 100mm

T Bolt 100x 10mm

T Bolt 150x10mm

AL drop(L Type rod lock 9")

Providing and fixing of conduit pipes 25 mm dia ,fan boxes and lighting boxes for electric fittings including embedding in walls all completet job.

Fan Boxes:

Light Boxes:

Conduits:

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including. rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished welded type tubes

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm).

Carriage of fine aggregates by MT 35 km

Carriage of stone aggregates by MT 15 km

Carriage of bricks.