Construction of Inspection Hut at Sianj

Amount

Cutting in earth work in all kind of soil and disposal of excavated earth upto a lead of 20mtr away from site of work as per direction of Engineer-in-charge.

Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sides and bed, stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per direction and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth ( under Floor) complete in all respect including carriage of materials in all leads and lifts.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all lead and lifts.

Providing and laying Cement Concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:-

Foundation footing bases of columns etc and mass concrete.

Columns, pillars, post and struts. :- a)Square, rectangular or polygonal in plan in all lead and lifts.

Beam, cantilever, girders and lintels. :- a)Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor in all lead and lifts.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like in all lead and lifts. :- a) Floors etc. up to 200 mm in thickness in all lead and lifts.

Edges of slab and breaks in floors and walls under 20 cm wide in all lead and lifts.

Stair cases with sloping or stepped soffits excluding landings in all lead and lifts.

Vertical surface such as wall (any thickness) partition and the like including attached pillasters, butresses, etc. plinth and string course complete job in all respects with in all leads and lifts as per the direction and best satisfaction of Engineer-in-charge.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation footing bases of columns etc and mass concrete in all lead and lifts.

Colunms pillars posts and struts upto floor two level in all lead and lifts.

Lintels, beams girders bressumers and cantilevers upto floor two level in all lead and lifts.

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all lead and lifts.

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level in all lead and lifts.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level in all lead and lifts.(Tor Steel ).

Provdiing and laying 20 cm thick composit stone masonry with stone masonry with stone facing of chisel dressed stone one line dressed in cement mortar 1:6 (1 cement :6snnd) and concrete backing with cement concrete 1:3:6 (1cement :3and :6 graded stone aggregate 20 mm norinal size) on inner face of walls including cenrting shuttering and propping complte upto floor two level in all lead and lifts.

Ist class brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

1st class Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4 (1 Cement : 4 Sand) including carriage of materials in all leads & lifts.

Providing and fixing 40x3mm flat iron hold fast 40 cm.long including fixing to frame with 10mm diameter bolts,nuts and wooden plug and embedding in cement concrete block 30x10x15cm of 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) complete in all respect including carriage of material in all leads and lifts.

Providing wood work of 1st class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:3 including carriage of material in all leads & lifts.

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:6 including carriage of material in all leads & lifts.

20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads and lifts.

20 mm cement plaster in two coats backing coat 15mm & finishing coat 5mm thick on rough side of brick/stone masonry for interior plastering up to floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In cement mortar 1:4 (1cement:4sand).

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete under flooring complete in all respect including carriage of material in all leads & lifts.

Boulder filling dry hand packed tightly under floors in all leads and lifts

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with floating coat of neat cement in all leads and lifts and as per the direction of the Engineer-in-Charge 40 mm thick including carriage of material in all leads & lifts.

Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor 20 mm thick including carriage of material in all leads & lifts.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of material in all leads & lifts. 30 mm thick.

Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:6 (1cement:6 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) pointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts.

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (600 x600mm. size) treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3 sand) finished with flush pointing in white cement including carriage of material in all leads & lifts.

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.

Providing and fixing bright finished brass sliding door-bolts with nuts and screws etc. complete in all respect including carriage of material in all leads & lifts.

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete. in all respect including carriage of material in all leads & lifts.

Providing and fixing bright finished brass handles for doors with screws etc. complete. in all respect including carriage of material in all leads & lifts

Providing and fixing bright finished brass hard drawn hooks and eyes complete in all respect including carriage of material in all leads & lifts.150 mm

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) complete in all respect including carriage of material in all leads and lifts .

Providing and laying cement concrete 1:5:10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm to 300mm as per H.P.P.W.D. Specification complete in all respect including carriage of material in all leads & lifts .

Stone filling behind retaining walls complete in all respect including carriage of material in all leads and lifts

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 19mm thick water proof commercial board in shutter of cub board with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 4mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts.

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete in all respect including carriage of material in all leads & lifts. 1st class deodar wood

Providing and fixing bright finished brass handles for cup board with screws etc. complete. in all respect including carriage of material in all leads & lifts. 125 mm

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts.

Steel work welded in built up section i/c cutting hosting, fixing in position and applying a priming coat of red paint is grating frames quard bars ladder raillings brackets and similar work in all leads & lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges

Providing and fixing 15 cm. wide 45 cm. overall semi circular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of material in all leads & lifts. 0.80mm thick sheet.

Providing and fixing stainless steel railings 304 grade stairs and like , top hand rail 50mm dia, balusters at alternative step 40x40mm sq. hollow pipe, 4 nos horizontal row of 20x20mm square pipe, all sections 14 gauge, duly polished at welded joints and finishing complete in all leads and lifts.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts .

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts .

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metling the surface complete in all respect including carriage of material in all leads & lifts .

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect including carriage of material in all leads & lifts .

Applying one coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering and knotting complete in all respect including carriage of material in all leads & lifts.

Applying sprit and stains any colour on new wood and wood based surfaces for preparing shade for polish complete Sirca/Asian Make in all leads & lifts.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting.complete including carriage of material in all leads & lifts Readymixed paint brushing with pink for priming in all leads & lifts.

Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint in all leads & lifts.

Painting two costs (excluding priming coat) on new steel and other metal surfaces with enamel paint brush in to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint

Providing and fixing Plaster of paris (POP) false ceilings duly suspended from RCC slabs, using GI main and cross section , angle "L" runner with wall, frame grid size will be 45x60 cms, fastened to slab with 8mm dia fasteners, using wire mesh 5x5mm grid, 1 mm dia wire fixed with screw on GI frame work, then applying 12mm finishing layer of POP complete in all leads and lifts .

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks complete in all respect including carriage of material in all leads & lifts.

Providing and fixing of fixed glass 6.00mm thick fixed with woods beading 4x2cms in size in fixed position of window in all leads & lifts.

Providing and fixing high pressure spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal brach of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal brach with eval access of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts.

Providing and fixing viterous China wash down water closet (European Type WC pan) with intergral “P”or”S” trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1 sand) including entire carriage of material within all leads and lifts.

Single piece WC i/c seat cover for VIP Cera make CODI

Providing and Fixing 10 litres vitrous china low level flushing cistern with a pair of CI or mild steel brackets, complete with fitting such as lead valve less syphon 15mm normal size brass ball valve with polythene float CP brass handle union & couplings for connections with inlet, outlet & overflow pipe 40mm dia CP flush beng i/c cutting holes in walls & making good the same & connecting the flush bend with cistern & closet (over flow pipe to be measured & paid for separately).

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i/c entire carriage of material within all leads and lifts. Cera make Concord, 630x450mm size.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fitting i/c entire carriage of material within all leads and lifts.

Providing and fixing of MI union for wash basin 32mm dia i/c carriage of material within all leads and lifts.

Providing and fixing 32mm dia lead waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm.

Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.

Providing and fixing CP toilet paper holder common and VIP toilet i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass soap dish i/c entire carriage of material within all leads and lifts.

Providing and fixing Tooth brush and tumbler holder i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass shower 85mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap short body 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.

Providing and fixing brass angle valve 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing CP concealed stop cock 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing single hole single lever wash basin mixture i/c entire carriage of material within all leads and lifts.

Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.

Providing and fixing Jet connection fixed for WC seat i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel ring i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel rack 600x250mm for VIP toilet i/c entire carriage of material within all leads and lifts.

Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts

15mm dia

20mm dia

25mm dia

Providing & fixing Brass full way wheel valve i/c entire carriage of material within all leads & lifts

15mm dia

20mm dia

25mm dia

Providing and fixing 115x50x25cms size double bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts

Providing and fixing 1000 ltrs. Double layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing & testing. (i) inside size 1200 x 900 x 1000 mm deep i/c CI cover with frame (medum duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand) complete in all respect with in all leads and lifts.

Providing & fixing stone ware gully trap grade 'A' complete with CI grating,Brick Masonry chamber in cement mortor 1:5 & water tight CI cover with frame of 300 mm x 300 mm size (inside) .The wt.of cover to be not less than 4.53 Kg & frame to be not less 2.72 Kg. (Square mouth traps 100 x 100 mm size) complete in all respect with in all leads and lifts.

Providing and errection of Sofa set ( 3 Seater) of wood filled with and coverd with cotton silk cloth complete in all respect with in all leads and lifts.

Providing and errection of Sofa set ( 2 Seater) of wood filled with and coverd with cotton silk cloth complete in all respect with in all leads and lifts.

Providing and errection of Sofa set ( 1Seater) of wood filled with and coverd with cotton silk cloth complete in all respect with in all leads and lifts.

Providing and erection of center table frame of wood, top of toughened glass 10mm thick and size 3'X3' complete in all respect with in all leads and lifts.

Providing and errection of center table frame of wood , top of toughened glass 10mm thick and size 2'X4' complete in all respect with in all leads and lifts.

Providing and erection of center table frame of wood , top of toughened glass 10mm thick and size 42"X21" complete in all respect with in all leads and lifts.

Providing and erection of rectangle Dining set 8 seater wood , top of toughened glass 10mm thick and size 8'X4' complete in all respect with in all leads and lifts.

Providing and erection of side table made with ply board having size 18" X 18" complete in all respect with in all leads and lifts.

Providing and erection of cot single complete in all respect

Providing and erection of Double bed box made with 19mm thick ply board having size of 70"X75" complete in all respect with in all leads and lifts.

Providing and fixing computer /study chair revolving Executive Type (Godraj made) for VIP bed room complete in all respect with in all leads and lifts.

Providing and supplying of Balcony Chairs complete in all respect with in all leads and lifts.

Providing and supplying of easy Chairs with arms complete in all respect with in all leads and lifts.

Providing and supplying of plastic Chairs complete in all respect with in all leads and lifts.

Providing and fixing sleep well (spring fresh 75x35x5.5" thick).in VIP Bed Room complete in all respect with in all leads and lifts.

Providing and fixing sleep well (spring fresh 75x35x4" thick).in guest Room complete in all respect with in all leads and lifts.

Providing Pillows(686x432x100mm) complete in all respect with in all leads and lifts.

Providnig and supplying bed side runner matt complete in all respect with in all leads and lifts.

Providing and fixing of center carpet for VIP 5'x3' complete in all respect with in all leads and lifts.

Providing and fixing foot mat small complete in all respect with in all leads and lifts.

providing and fixing foot matt for main enterance 4'x3' complete in all respect with in all leads and lifts.

Providing double bed quilts with cover poly-fill type complete in all respect with in all leads and lifts.

Providing single bed quilts with cover poly-fill type complete in all respect with in all leads and lifts.

Providing double bed blanket complete in all respect with in all leads and lifts.

Providing single bed blanket complete in all respect with in all leads and lifts.

Providing double bed Dhor complete in all respect with in all leads and lifts.

Providing bed cover for VIP bed room complete in all respect with in all leads and lifts.

Providing double bed sheet with pillow cover complete in all respect with in all leads and lifts.

Providing single bed sheet with pillow cover complete in all respect with in all leads and lifts.

Prviding and fixing Dinning table Matt complete in all respect with in all leads and lifts.

Providing and supplying Bath Towel complete in all respect with in all leads and lifts.

Providning Hand Towl complete in all respect with in all leads and lifts.

Providing and fixing Curtain 200 in length complete in all respect with in all leads and lifts.

Providing and fixing Room pillar Heater complete in all respect with in all leads and lifts.

Providing set of bathroom bucket (20 ltrs) mug, patra, soap, harpik toilet cleaner, toilet brush etc. (Milton make) complete in all respect with in all leads and lifts.

Providing dustbin padel type complete in all respect with in all leads and lifts.

Providing Cup Board hanger complete in all respect with in all leads and lifts.

Providing and fixing 42" LED television reputed make complete in all respect with in all leads and lifts.

Providng and fixing Table Lamp for VIP set complete in all respect with in all leads and lifts.

Providinhg and fixing of Wall painting of 3'x2' complete in all respect with in all leads and lifts.

Providing and fixing Flower Pot complete in all respect with in all leads and lifts.

Providing Portable plastic chairs of reputed make complete in all respect

Providing and fixing water cooler 29 ltre. Capacity (ISI blue star Make) complete in all respect with in all leads and lifts.

Providing and fixing of refrigerator 350 ltr. Capacity of reputed make complete in all respect with in all leads and lifts.

Providign and fixing of water purifier UV/RO Of reputed make complete in all respect with in all leads and lifts.

Providing and fixing LPG stove with 4 burner complete in all respect with in all leads and lifts.

Providing and fixing LPG connection complete in all respect with in all leads and lifts.

Providing Pressure Cooker 10 ltr.capacity

Providing Pressure Cooker 5 ltr.capacity

Providing Pressure Cooker 3 ltr.capacity

Providing Large Alluminium Pan 50 Ltr. Capacity

Providing Medium Alluminium Pan 40 Ltr. Capacity

Providing Tea pans (SS) 2 ltr.capacity

Providing Service Tray 45x30 cm alluminium

Providing stainless steel Spoons of reputed make

Providing Dinner Set Melmoware of standard make

Providing Dinner Set stainless Steel of standard make

Providing Tea Set of standard make

Providing Tea Cup Hotel Series of standard make

Providing Water Glass 225ml of standard make

Providing stainless steel Service Spoons of standard make

Providing stainless steel Water Jug (SS) 1.50 Ltr. Capacity of standard make

Providing Steel Tumbler of standard make

Providing stainless steel Karachi (M-L-S0 of standard make

Providing Knives of standard make

Providing Full Rice Plate of standard make

Providing quarter Plate of standard make

Providing Service Bowl of standard make

Providing Soup bowls set of 6 of standard make

Providing Chakla, Belan, Tava, seaves and misc. items of standard make

Providing Empty plastic Jar ( Milton make/ Approved make)

Providing satinless steel Grain storage basket 20 ltr. Drum of standrad make

Providing Stainless steel full plates of standrad make

Providing Stainless steel bowls of standrad make

Providing Fry Pan of standrad make

Providing Karahi (Large / Small ) of standrad make

Providing and Supplying of induction cooker( Plate) of standrad make

Providing and Supplying of Mixure(Mixi) INALSA/USHA/WHITELINE Make / standard make Heavy duty

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules (140mmx78mmx50mm)

6 modules (205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size of Havells / Finolex/Bajaj make PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing wire from MCB box to main pannel board.complete in all respect.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar complete in all respect.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Bell push, Modular.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required.

Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required.

Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required.

Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required.

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:-

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:-

Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater USHA/ BAJAJ HAVELLS Make (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, USHA/ BAJAJ HAVELLS Make , Ornamental Model Category-A

Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. USHA/ BAJAJ/ HAVELLS Make complete in all respect.

Providing and fixing 1 x36 watt-CFL (Category-A) of surface mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL), complete with all accessories, connections, testing and commissioning etc. as required.BAJAJ/ HAVELLS Make complete in all respect.

Providing and Fixing 6 watt. Recessed down lights round shape for false ceilings complete. BAJAJ/ HAVELLS Make complete in all respect.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.BAJAJ/ HAVELLS Make complete in all respect. (Category-A)

Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x20 watt BAJAJ/ HAVELLS Make complete in all respect. complete in all respect.

Providing and fixing Mirror light 60 cm long 6 watt LED fixture BAJAJ/ HAVELLS Make complete in all respect.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required

Supplying and fixing CFL 9 watt LED bulbs A.C. single phase,230 volts BAJAJ/ HAVELLS/ CROMPTON Make complete in all respect. complete as required

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required.

Supplying and fixing of integral CFL Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CFL 26 watt .BAJAJ/ HAVELLS Make complete in all respect.

Supplying and fixing of integral LED BOUNDARY WALL lights fixed over GI pipe poles 1.20 mtr. Ht. 50mm dia, 9 watt LED Lamp with 200 mm dia globe made of acrylic sheet BAJAJ/ HAVELLS Make complete in all respect.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing 12 unit intercome exchange with phone sets and wiring of reputed /standrad make complete in all respect.

Supplying and fixing of split type air conditioner Blue star/LG/ Onida Whirlpool/Lloyd/ Samsang make having two stars features auto clean filter four way swing all copper pipes including making provision of draining of back moisture water through GI pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required

1.50 Tonne capacity

2.00 Tonne Capacity

Oasis Enterprises