Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
6 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
SR.DEN/III
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Repair and Rehabilitation of Washing Line Catwalk Pillars & Slabs, Improvement of Drainage System, Provision of Manhole Covers, Repair of Dustbins, and Allied Civil Works in the Washing Lines & Stabling Line Area under SSE/Works/ANVT in the Section of ADEN/NDLS.
NIT-46-2026-27-W-III~NR
NIT-46-2026-27-W-III
Open
Works - General
12 Months
Delhi
₹0
₹4.0 L
15 Oct 2026
15 Oct 2026
23 Oct 2026
34 items across 2 schedules · ₹2,14,12,533.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 290 | 205.45 | 59,580.5 |
| 2 | Foundations, footings, bases for columns | Sqm | 120 | 307.95 | 36,954 |
| 3 | Concrete of M10 grade with minimum cement content of 220 kg /cum. (Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 100% each). | cum | 50 | 7,102.95 | 3,55,147.5 |
| 4 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 140 | 10,185.05 | 14,25,907 |
| 5 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 120 | 307.95 | 36,954 |
| 6 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 1150 | 766.55 | 8,81,532.5 |
| 7 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 920 | 804.25 | 7,39,910 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 5800 | 89.65 | 5,19,970 |
| 9 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 200 | 10,306.2 | 20,61,240 |
| 10 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 40 | 6,882 | 2,75,280 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 65 | 8,512.1 | 5,53,286.5 |
| 12 | Electric resistance or induction butt welded tubes | Kg | 5200 | 140.85 | 7,32,420 |
| 13 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 6300 | 142.3 | 8,96,490 |
| 14 | 1:4 (1 cement: 4 fine sand) | Sqm | 460 | 294.85 | 1,35,631 |
| 15 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 6300 | 158.95 | 10,01,385 |
| 16 | One or more coats on old work | Sqm | 1750 | 86.55 | 1,51,462.5 |
| 17 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 12 | 2,007.1 | 24,085.2 |
| 18 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 25 | 2,928.1 | 73,202.5 |
| 19 | 250 mm dia. R.C.C. pipe | Metre | 180 | 811.15 | 1,46,007 |
| 20 | Circular shape 560 mm internal dia | Each | 18 | 1,882.2 | 33,879.6 |
| 21 | 25 mm average thickness | Sqm | 1450 | 104.6 | 1,51,670 |
| 22 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | Sqm | 1700 | 117.75 | 2,00,175 |
| 23 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make | Sqm | 920 | 390.45 | 3,59,214 |
| 24 | 25 mm average thickness in 2 layers. | Sqm | 1200 | 510.5 | 6,12,600 |
| 25 | Epoxy injection grout in concrete/RCC work of approved make | Kg | 1200 | 793.25 | 9,51,900 |
| 26 | Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge. | Each | 550 | 202.7 | 1,11,485 |
| Schedule total | ₹1,25,27,368.8 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022withCSupto11.pdf
ATTACHMENT
Specialinstructionstothetenderer.pdf
ATTACHMENT
StandardTenderDocument2022R5withcondition_1.pdf Standard Tender Document 2022
ATTACHMENT
StandardTenderDocument2022R5withcondition_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .