Repair/replacement of Sanitary/bath fittings, plumbing, flooring, plastering, joinery, false ceiling and wall paneling etc at 42 Inf Bde, 8 Garh Rif, 42 Inf Bde Sig Coy under AGE B/R-I of GE Dehradun.

Amount

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L glazed ceramic colour tiles of size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 inlcuding dismantling of existing wall tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L vitrified ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor / skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors,skirting etc. including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiles complete all as specified

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

M & L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors etc complete all as specified

M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

M&L 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M&L for granite stone 18 to 20mm thick glazed (table rubbed and polished) fixed as in staps, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes including demolition of existing stone complete all as specified and directed.

M&L heavy duty Dura stone Skid proof parking vitrified coloured ceramic tiles 10-12 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specifeid

M&L for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specifeid

M&L for grinding and polishing to existing kota stone flooring, udaipur green slab flooring, terrazo flooring etc complete all as specifeid

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. of size exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. of size n exc. 1 Sqm complete all as specified

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified

All as per item No 19 here in above but exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified

Taking down chowkhats or frames with shutter n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified.

All as per itme No 21 here in above but exc. 1.5 Sqm and not exceeding 4 Sqm each complete all as specified.

S & F second class hardwood (Golden Teak) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified.

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

S & F 30 mm thick second class hardwood (Golden Teak) glazed and Skelton factory made window/ventilator shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass / gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24(b) and as directed

All as per itme No 26 here in above but 30 mm thick without shash bar for window/ventilator shutter complete all as specified in SSR Part-I clause 8.24 b.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 125 mm x 65 mm x 50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube as specified in SSR Part-II complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge. Make : “Syntex/ Rajshree Plastic wood Forex ”, ECHON.

S&F in repair for powder coated aluminium window alloy coated standared hollow section as mentioned below window frame (bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type with aluminium sections as per series -A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4m thick , fixed with glazing clips, rubber beading / gasket anodised beading, srew and lock type handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed.shutter Top & bottom size :37.50x15x1.60mm, shuter inner lock size 37.50x15x1.60mm, chowkhat bottom size 50.30x26x1.20mm, chowkhat top & size 50x30x26x1.00mm and making good of wall surface with matching to existing surfaces, including gril with frame fixed to by means stainless steel screws complete all as specified and directed. Make: Anodised aluminium section: Joindal/Hindalko/Indalco. Glass: Sant gobin/Modi guard/Tata.

S&F in repair for powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fitting, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old/ ventilator and making good of wall surface to match with existing surface complete all as specified and directed :- aluminium section shall be of size as given below: Frame:- 44.5x44.5mmx 1.08mm thick, Top/ botton rails and middle / side styles of shutter - 44.5x 44.5 mm x 1.08 mm thick Including Glass: 5 mm thick frodted glass fixed with rubber gasket with aluminium beading, necessary aluminium beading,wire gauge incl aluminium gril with frame fixed to by means stainless steel screws complete all as specified and directed.

S&F in repair for powder coated aluminium partion (fixed) made out of aluminium powder coated section 83x 44.45 x 2.00 mm including 5mm thick glass/ACP sheet complete with rubber packing /aluminum beading etc including dismantling of existing structure complete all as specified and directed.Make: (i) Anodised aluminium section: Joindal/Hindalko/Indalco. (ii) Particle board Navipan/ Puratuff/ kitlam (iii) Glass :Sant gobin/Modi guard/Tata.

S&F in repair aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one door closer,one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Titz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw, complete all as specified and directed at site. Chowkhat frame : 101.60x44.45x1.60mm, Shuter verticle style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm Make : (i) Anodised aluminum section : Jindal/Hindalko/Indalco (ii) Particle board : Navipan/Puratuff/Kitlam (iii) Glass : Saint gobain/Modi guard/Tata

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

S & F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified

S&F 0.56 mm dia stainless steel wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples or with wooden beads complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified

S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified

S&F mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified.

S & F stainless steel barrel tower bolts gde-202 150 mm long one piece and fixed complete all as specified

S & F stainless steel barrel tower bolts gde 202, 200 mm long one piece and fixed complete all as specified

S & F stainless steel butt hinges, gde 202 medium weight 75 mm long one piece and fixed with screws/welded to frame ,complete all as specified

S & F stainless steel butt hinges,gde 202 medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete all as specified.

S & F stainless steel handles gde 202 150 mm long one piece and fixed with screws/welded to frame ,complete all as specified.

S & F stainless steel handles gde 202, 125 mm long one piece and fixed with screws/welded to frame ,complete all as specified.

S&F Hasp and staple 75mm safety type, gde 202 stainless steel with hinge pin including bolt to hinge plate and fixed with screws

S & F 300 mm long stainless steel sliding door bolt gde 304 (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified.

S & F in 300 mm stainless steel, gde 204 ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified.

S & F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified.

S&F in repair Pre laminated particle board, 18/19mm thick, both sides with decorative choice lamination, exterior grade fixed with screws to timber frame work, fixed in repairs including second class hard wood plain, fillets, square, rectangular or triangular in section, wrought, secured with nailsor brads, cross sectional area exceeding 3 Sq.cm but not exceeding 6 Sqcm complete all as specified and as directed.

S&F in repair factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cilica ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.

S&F in repairs 6 mm thick WPC board one side prelaminated and other side plain white colour as in cup board/shelves, fixed with screws , solvent cement/ashesive complete all as specified and directed.Make : Rajshri/ECHON/Alstone

S & F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.

S&F hasp and staple 100mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel complete all as specified and directed.Make : Hexa/Hettich/Hafele

S&F Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and directed.Make : Hexa/Hettich/Hafele

S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.Make : Hexa/Hettich/Hafele

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing in replacement PVC sheet wall panelling of thickness 5 mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for astheic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall, complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample complete all as specified and ditected. (Make-Vista or equivalent as approved)

M & L for two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

M & L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated / plain / linner steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, ridge, cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating regular modified galvanised tile profile sheet (Corrugation in any profile) 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof slab covering, ridge/ facia , chajja fixed to iron/wooden members with self drilling/ self tapping zincalume coated metal screws having cap with rubber and metal washers complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and ditected.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

M & L for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified.

M & L for one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja , cover slab and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed.

S&F mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT)

M&L for use and waste form work to soffits of suspended slab such as roof slabs, floor slabs, landing, kitchen slab, chajja and similar works, not exceeding 200mm thick for rough finished surfaces of concrete complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 82 here-in-above but 20mm dia complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 20cm girth complete all as specified.

Supply & Fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all as specified

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. Make :Hindware/Parryware/Jaquar.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified.

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete. Make : Jaquar cat part No (CNS-WHT-301) or equivalent in Hindware/Parryware.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore short body Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified.

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F in repair looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw of size 600 x 450 x 5 mm thick complete all as specified .

S&F 5mm thick Fancy type looking mirror fixed to wall with teakwood beading complete all as specified and directed by Engr-in-charge Make : Modiguard/Sant Gobian and Cera eqivalent

S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.

supply and fix in brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed.

S&F in repair 32 mm Waste fittings /coupling brass, chromium plated for wash hand basin, basins, etc. with long screwed shanks and fly-nuts complete all as specified

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).

S&F in repairs vitreous chinaware wash down water closet pan (Padestal pattern) fency type including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and dircted..

M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner

M&L cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner

S & F rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified.

S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified.

M & L in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified.

Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

S & F Designer Acrylic PVC sheet 2-3mm thick fixed with screw and washer in gate , wall ,fencing etc complete all as specified and as directed by Engr-in-Charge.

Cleaning of manholes any depth any size taking out accumulated, soil, sludge any material incl both ends and removal to MD lands and manhole cover refixing complete all as specified and directed by Engr-in-Charge.

Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposing off out of MD land as directed by Engr-in-Charge. Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and directed by Engr-in-charge

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soil complete all as specified and directed by Engr-in-charge

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes, laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

M & L for construction of soakage well , internal dia 2.40M dia x 3 mtr deep including excavation in any type of soil complete all as specified and shown on TD Drawing & as directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, benching, cills, hold fast, sismic and similar other bands etc. including necessary including weathering, slightly rounded or chamfered angles and throating and necessary form work complete all as specified and directed.

Demolition of Brickwork or stone/bou-lder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M&L brick work with fly ash brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified

M&L brick work with fly ash brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified

M&L for rendering on fair faces of brick/concrete surfaces 10 mm thick in patches n exc 3 Sqm in cement mortar (1:4) mixed with water proofing compound, surface finished even and fair without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.

M&L for preparing of old plastered and unplastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old plastered and unplastered surfaces of wall and applying two coats of distemper oil emulsion complete all as specified & directed by the Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

M&L for preparing of old plastered and unplastered surfaces of wall and applying one coat of cement based paint complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old decorated surfaces / AC sheet and applying two coats of cement based paint on walls complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old plastered and unplastered surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified & directed by the Engr-in-Charge.

M&L for preparing of old plastered and unplastered surfaces of ceiling and applying two coat of distemper oil emulsion complete all as specified & directed by the Engr-in-Charge.

M&L two coat weather coat exerior emulsion paint/ Apex ultima paint any tint over a coat of primer on walls/chajja,roof facia (projected portion) etc complete all as specified in SSR Part I including complete removal of old existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.Make : Berger/Asian/Shalimar Note : The work will be carried out upto double storey builing the rate of scafolding is included for this item also.

M&L for preparation of old decorated surfaces and applying one coat of interior plastic emulsion paint on wall/ceiling complete all as directed by Engg-in-Charge.

M&L applying interior grade wall care putty 1mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L for applying POP of 1mm thickness over plastered surface to prepare the surface even and smooth.as specified and directed.. Make : Berger/Asian/JK/Birla

M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1mm thick to make the surface smooth as specified and directed by Engr-in-Charge. : Make : Berger/Asian/JK/Birla

M&L for two coat of white wash on walls surface including preparation of old surfaces of any description complete all as specified and directed.

M&L one coat of white wash on celing surface including preparation of old surfaces of any description complete all as specified and directed.

M&L preparation of new or previously untreated surface of cureve stone /concrete stone of any description over 10cm girth or width, applying two coats of synthetic enamel paint yellow/black/white (ordinary tint) over a coat of priming paints complete all as specified in SSR Part I.

M & L for providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it, including taking down existing membrane and reparing plaster etc complete all as specified and directed.

Taking down PVC/ AC/Salt glazed ware pipes and fittings upto 110mm complete all as specified.

S & F 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified

S & F 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

S & F 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified.

S & F 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

M&L for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch . Note - colour coding shall be maintained properly as per IE rule.

All as per Item No 159 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as directed.

All as per Item No 159 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board complete all as directed.

All as per Item No 159 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 159 mentioned here-in- before but One light point controlled with two Nos switch, 2 way complete all as specified.

All as per Item No 159 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch. Note - colour coding shall be maintained properly as per IE rule.

All as per Item No 165 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as directed.

All as per Item No 165 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board complete all as directed.

All as per Item No 165 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified.

All as per Item No 165 mentioned here-in- before but one light point controlled with two Nos switch, 2 way complete all as specified.

All as per Item No 165 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as directed.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed.

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as directed.

S & F bell push flush type 5 Amps 230 Volts single pole complete all as directed.

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified.

S & F calling bell ding dong type AC 230 Volt single pole complete all as directed. Make:- Havells/Anchor/Cona.

S & F stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as directed.

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified. Make:- Havells/Anchor/Cona.

S&F anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as directed. Make:- Havells/Anchor/Cona.

S&F in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size .

S&F in repair decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified.

Supply and fixing in repair 8/10 Watts LED Bulk head light fitting die cast alluminum body and defused glass cover complete all as directed.

S&F in repair LED tube light fitting batten type all in one single phase 20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as directed..

Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Note: The unit rate include for painting to bracket with one coat of red oxide paint and two coat of alluminium paint before fixing.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main wiring. Note:- Three runs of wire and one run of conduit pipe shall be measured as one meter only for payment purpose.

M&L in repair for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make

S&F in repair MCCB 415 Volts, 63 Amps, rating 4 Pole (triple pole and neutral), adjustable Thermal Magnetic release (Service Breaking Capacity 16KA (Ics=100%Icu)-05 Nos complete all as directed.

M&L in repair for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make Make :- Legrand/C&S/ABB/Indoasian.

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed Make :- Legrand/C&S/ABB/indoasian.

Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 Amps and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 25 to 63 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning.

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium grade 15 mm bore and water pipe 20 mm bore GI light grade, with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-1 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. Note: (i) If the earth resistance is not found within permissible limit earthing shall be redone by contractor at no extra cost. (ii) Cost of GI wire and protection pipe upto 7.5 mtr is included in the rate quoted for this item

M/s Anil Kumar

M/s Teg Singh Negi