Annual repair and maintenance of Old PCM road km. 206/000 to 207/455. (SH- Providing and laying interlocking paver block work etcetera at RD 207/050 to 207/095).

Earth work in excavation for structures for all kinds of soil as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto any lead, dressing of sides and bottoms and back filling in trenches with excavated suitable materials complete within all leads, lifts, carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Providing and laying concrete for plain / reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 & 1203. Plain cement concrete grade M-20(twenty) nominal mix 1:2:4 (one cement : two sand : four graded, crushed stone aggregate 40mm (forty millimetre) nominal size) curing complete including the cost of form work within all leads, lifts carriage of material and other incidental complete in all respect as per direction of Engineer-in-Charge.

Providing and laying factory made chamfered edge 80mm (eighty millimetre) thick cement concrete paver blocks of M-40 forty) make of Ashok Panjla tiles, Pooja Concrete Fabricators or its equivalent in footpath, parks, lawns, drive ways or light traffic parking etcetera of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour design and pattern over 50mm (fifty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete within all leads, lifts carriage of material and other incidentals as per direction of Engineer-in-Charge.

Providing and laying to level or slope semi circular (half cut) reinforced cement hume pipe light duty non pressure pipe 1st class NP2 450mm dia (four hundred fifty millimetre diametre) for drain and foundation concrete 10cm.(ten centimetre) thick C.C.1:3:6 (one cement : three sand: six graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 15cm.(fifteen centimetre) c.conc. 1:2:4 (one cement : two sand: four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) in sides including earth work and disposal of excavated earth in all leads, lifts and other incidentals complete in all respect including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel make of Sail, Jindal or its equivalent etcetra as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.