Construction of Main Gate at PHQ Dahod and Area Development near Anganvadi at PHQ Dahod (Including Electrification) [1st Attempt]

Name of Work:- Construction of main Gate at PHQ Dahod and Area Development near anganwadi at PHQ Dahod, Dist : Dahod (Incl. Elec.)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for

Item Description Qty. Unit In In

1 Demolition including stacking of serviceable materials and disposal of 67.00 Cum 1097.15 Rs. One Thousand Ninety

unserviceable materials with all lead and lift (i) RCC Work Seven & Paise Fifteen

2 Demolition of Brick work and stone masonry including stacking of 12.00 Cum 570.59 Rs. Five Hundred

serviceable materials and disposal of unserviceable materials with all Seventy & Paise Fifty

lead and lift (ii) in cement mortar Nine Only

3 Excavation for foundation in Loose or soft upto 1.5 m. depth including 28.00 Cum 124.61 Rs. One Hundred Twenty

sorting out and stacking of useful materials and disposing of the Four & Paise Sixty One

excavated stuff upto any Lead and Lift. Only

4 Excavation for foundation in Dense or Hard soil upto 1.5mt depth 51.00 Cum 159.30 Rs. One Hundred Fifty

including sorting out and stacking of useful materials and disposing of the Nine & Paise Thirty Only

excavated stuff upto Any Lead and Lift

5 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 27.00 Cum 2653.39 Rs. Two Thousand Six

graded stone aggrigates of 40 mm nominal size) curing complete Hundred Fifty Three &

excluding cost of formwork in FOUNDATION AND PLINTH. Paise Thirty Nine Only

Item Description Qty. Unit In In

6 Providing and laying cement concrete 1:2:4 (1-cement:2-coarse sand:4- 1.00 Cum 3617.44 Rs. Three Thousand Six

graded stone aggregate of 20mm nominal size) and curing etc.complete Hundred Seventeen &

excluding cost of formwork in Foundation and Plinth. Paise Forty Four Only

7 Providing and laying controlled cement concrete M - 250 and finishing 14.00 Cum 4582.67 Rs. Four Thousand Five

smooth with curing etc. complete Including the cost of form work of Hundred Eighty Two &

Plywood only with fair finish & Proping must be of steel only so as to give Paise Sixty Seven Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

column FOOTING base of columns and Mass concrete. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

8 Providing and laying controlled cement concrete M - 250 and finishing 7.00 Cum 8353.70 Rs. Eight Thousand Three

smooth with curing etc. complete Including the cost of form work of Hundred Fifty Three &

Plywood only with fair finish & Proping must be of steel only so as to give Paise Seventy Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

COLUMN upto PLINTH for any cross sectional area of column. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

9 Providing and laying controlled cement concrete M - 250 and finishing 12.00 Cum 7230.52 Rs. Seven Thousand Two

smooth with curing etc. complete Including the cost of form work of Hundred Thirty & Paise

Plywood only with fair finish & Proping must be of steel only so as to give Fifty Two Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

PLINTH Beam for any cross sectional area of Beam. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Item Description Qty. Unit In In

10 Filling avaliable excavate earth ( excluding rock). In trenches, plinth 78.00 Cum 136.11 Rs. One Hundred Thirty

sides of foundations etc. in layers NOt exceeding 20 cms. In depth Six & Paise Eleven Only

consolidation each deposited layer by ramming and watering.

11 Supplying and Filling in Foundation and Plinth with selected soil or 552.00 Cum 270.37 Rs. Two Hundred

murrum in layers of 20cms. thickness including watering, ramming, Seventy & Paise Thirty

consolidating and dressing etc.complete. Seven Only

12 FILLING in plinth with SAND under floors including watering, raming 4.00 Sqm 415.66 Rs. Four Hundred Fifteen

consolidating and dressing etc. complete. & Paise Sixty Six Only

13 Applying general insecticide pest control treatment to floors, cupboards 35.00 Sqm 53.85 Rs. Fifty Three & Paise

etc including labour material etc. complete. Using Heptachloride 20 EC. Eighty Five Only

As Per 6113_pests Consentration Weight 0.50 percent is recommended

one litre chemical emulsion dillute with 39 liter of water will give. Total

dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is recommended

14 Providing and laying controlled cement concrete M - 150 and finishing 2.00 Cum 3875.02 Rs. Three Thousand Eight

smooth with curing etc. complete excluding the cost of form work and Hundred Seventy Five &

reinforcement for R.C.C. work in foundation and plinth. Rate are also Paise Two Only

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Item Description Qty. Unit In In

15 Providing and laying controlled cement concrete M - 200 and finishing 4.00 Cum 3984.80 Rs. Three Thousand Nine

smooth with curing etc. complete excluding the cost of form work and Hundred Eighty Four &

reinforcement for R.C.C. work in foundation and plinth. Rate are also Paise Eighty Only

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

16 Providing and laying controlled cement concrete M - 250 and finishing 39.00 Cum 4273.14 Rs. Four Thousand Two

smooth with curing etc. complete excluding the cost of form work and Hundred Seventy Three

reinforcement for R.C.C. work in foundation and plinth. Rate are also & Paise Fourteen Only

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

17 Providing and laying controlled cement concrete M - 250 and finishing 6.00 Cum 6029.91 Rs. Six Thousand Twenty

smooth with curing etc. complete Including the cost of form work of Nine & Paise Ninety One

Plywood only with fair finish & Proping must be of steel only so as to give Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

coping for any cross sectional area. Rate are also inclusive of providing

and mixing Plasticizer of approved make in proportion as Per Mix

18 Providing and laying controlled cement concrete M - 250 and finishing 11.00 Cum 10833.80 Rs. Ten Thousand Eight

smooth with curing etc. complete Including the cost of form work of Hundred Thirty Three &

Plywood only with fair finish & Proping must be of steel only so as to give Paise Eighty Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

COLUMNS for any cross sectional area at GROUND FLOOR. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Item Description Qty. Unit In In

19 Providing and laying controlled cement concrete M - 250 and finishing 8.00 Cum 10873.48 Rs. Ten Thousand Eight

smooth with curing etc. complete Including the cost of form work of Hundred Seventy Three

Plywood only with fair finish & Proping must be of steel only so as to give & Paise Forty Eight Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

COLUMNS for any cross sectional area at FIRST FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

20 Providing and laying controlled cement concrete M - 250 and finishing 7.00 Cum 9066.41 Rs. Nine Thousand Sixty

smooth with curing etc. complete Including the cost of form work of Six & Paise Forty One

Plywood only with fair finish & Proping must be of steel only so as to give Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

Beam for any cross sectional area at Ground FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

21 Providing and laying controlled cement concrete M - 250 and finishing 8.00 Cum 9106.09 Rs. Nine Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Six & Paise Nine

Plywood only with fair finish & Proping must be of steel only so as to give Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

Beam for any cross sectional area at FIRST FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Item Description Qty. Unit In In

22 Providing and laying controlled cement concrete M - 250 and finishing 14.00 Cum 7735.86 Rs. Seven Thousand

smooth with curing etc. complete Including the cost of form work of Seven Hundred Thirty

Plywood only with fair finish & Proping must be of steel only so as to give Five & Paise Eighty Six

a fair finish but excluding the cost of reinforcement for R.C.C. work in Only

SLAB having thickness of 13 cm and upto 15 cm thickness for Ground

floor. Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

23 Providing and laying controlled cement concrete M - 250 and finishing 14.00 Cum 7775.54 Rs. Seven Thousand

smooth with curing etc. complete Including the cost of form work of Seven Hundred Seventy

Plywood only with fair finish & Proping must be of steel only so as to give Five & Paise Fifty Four

a fair finish but excluding the cost of reinforcement for R.C.C. work in Only

SLAB having thickness of 13 cm and upto 15 cm thickness for FIRST

floor. Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

24 Extra for additional height of propping and centering where the height 81.00 Sqm 606.14 Rs. Six Hundred Six &

of propping and centering exceeds 4 .O M between supporting floor to Paise Fourteen Only

ceiling including temporary brick or stone pillars for supporting as

required. (iii) Height more than 6.0 M. and upto 7.0 M

Item Description Qty. Unit In In

25 Providing and laying controlled cement concrete M - 250 and finishing 1.00 Cum 8770.91 Rs. Eight Thousand

smooth with curing etc. complete Including the cost of form work of Seven Hundred Seventy

Plywood only with fair finish & Proping must be of steel only so as to give & Paise Ninety One Only

a fair finish but excluding the cost of reinforcement for R.C.C. work in

Lintel for any cross sectional area at Ground FLOOR . Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

26 Providing TMT, Fe-500/500D bar reinforcement of RCC Work including 11490.00 Kg.s 76.52 Rs. Seventy Six & Paise

cutting, bending, binding and placing in position etc.complete for all Fifty Two Only

floor.( Brand as approved by GSPHC)

27 BRICK WORK in using common burnt clay building bricks having 18.00 Cum 3815.08 Rs. Three Thousand Eight

crushing strength not less than 35 kg/sq.cm. In cement mortar 1: 6( 1 Hundred Fifteen & Paise

cement : 6 coarse sand ) etc comp. in Foundation up to Plinth Eight Only

28 BRICK WORK using common burnt clay building bricks having crushing 48.00 Cum 4100.65 Rs. Four Thousand One

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred & Paise Sixty

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 Five Only

cement : 6 coarse sand) for GROUND FLOOR

29 BRICK WORK using common burnt clay building bricks having crushing 19.00 Cum 4138.78 Rs. Four Thousand One

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred Thirty Eight &

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 Paise Seventy Eight Only

cement : 6 coarse sand) for 1st FLOOR

Item Description Qty. Unit In In

30 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 71.00 Sqm 226.90 Rs. Two Hundred Twenty

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 Six & Paise Ninety Only

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand

Mortar of Proportion 1:1 (1.5mm thick About) at GROUND FLOOR.

31 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 77.00 Sqm 254.01 Rs. Two Hundred Fifty

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 Four & Paise One Only

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand

Mortar of Proportion 1:1 (1.5mm thick About) at FIRST FLOOR.

32 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 249.00 Sqm 229.09 Rs. Two Hundred Twenty

Concrete Wall for Interior Plastering and Finished Even and Smooth in Nine & Paise Nine Only

C.M. 1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat

of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at

33 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 107.00 Sqm 258.23 Rs. Two Hundred Fifty

Concrete Wall for Interior Plastering and Finished Even and Smooth in Eight & Paise Twenty

C.M. 1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat Three Only

of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at

Item Description Qty. Unit In In

34 Synthetic Texture Plaster with Double Coat Smooth plaster : 435.00 Sqm 503.15 Rs. Five Hundred Three

Providing 20mm thick cement plaster in single coat plastering upto floor & Paise Fifteen Only

two level Outside and finished even and smooth in (i) Cement mortar 1:3

(1-cement : 3-sand) as Base Coat and providing 2-3 mm thick synthetic

texture plaster of approved texture (Material Shall be Used as Approved

By GSPHCL Only ) including cost of all materials, labour, conveyance,

loading and unloading, taxes, royalties, scaffolding, watering

etc.complete for any Height as per Drawing and instructions of Engineer -

35 Providing 20 mm thick SAND FACED cement Plaster on walls above 81.00 Sqm 350.48 Rs. Three Hundred Fifty

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : & Paise Forty Eight Only

3 sand ) and 8mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc.

Complete for any height.

36 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 148.00 Sqm 192.51 Rs. One Hundred Ninety

Ceilling/Slop Surface (two coats) to give an required shap even shade Two & Paise Fifty One

after throughly brushing the surface to remove all dirt and remains of Only

loose powder material etc. complete. Rate are inclusive of applying two

coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface

to give and even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth. Fine Putty, primer, plastic Emulsion Paint Shall be used as per

approved material list by GSPHCL. (For All Floor)

Item Description Qty. Unit In In

37 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) 273.00 Sqm 181.87 Rs. One Hundred Eighty

to give an required shap even shade after throughly brushing the surface One & Paise Eighty

to remove all dirt and remains of loose powder material etc. complete. Seven Only

Rate are inclusive of applying two coat of lapy (Putty) and one coat of

primer on new wall surface to give and even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. Fine Putty, primer, plastic Emulsion Paint

Shall be used as per approved material list by GSPHCL. (For All Floor)

38 Finishing wall with weather proof exterior emulsion paint on wall 586.00 Sqm 155.21 Rs. One Hundred Fifty

surface (two coats) over and above applying One Coat Of Primer to give Five & Paise Twenty One

an required shape even shade after thoroughly brushing the surface to Only

remove all dirt, and remains of loose powdered materials.etc complete.

primer,Exterior Emulsion Paint Shall be used as per approved material

list by GSPHCL. (For any Height)

39 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick 81.00 Sqm 1682.60 Rs. One Thousand Six

tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: Hundred Eighty Two &

6 coarse sand) on new surface or fixing on existing flooring by adhesive Paise Sixty Only

including dismentaling of existing flooring and material jointed with color

cement slurry including finished with flush pointing & cleaning the

surface etc. complete. Size & Shade of tiles shall be as per Approved

Architecture drawing & as per direction of Engineer in charge.

Item Description Qty. Unit In In

40 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick 7.00 Sqm 1445.20 Rs. One Thousand Four

tile for skirting,risers of steps and dedo over10 mm (average) base of Hundred Forty Five &

cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface orfixing on Paise Twenty Only

existing flooring by adhesive including dismentaling of existing flooring

and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete. Size & Shade of tiles shall

be as per Approved Architecture drawing & as per direction of Engineer

41 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile 7.00 Sqm 1458.33 Rs. One Thousand Four

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 Hundred Fifty Eight &

coarse sand) on new surface or fixing on existing flooring by adhesive Paise Thirty Three Only

including dismentaling of existing flooring and material jointed with color

cement slurry including finished with flush pointing & cleaning the

surface etc. complete. Size & Shade of tiles shall be as per Approved

Architecture drawing & as per direction of Engineer in charge.

42 Provinding & laying Printed / Coloured Glazed 8mm thick TILES in 27.00 Sqm 1508.58 Rs. One Thousand Five

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 Hundred Eight & Paise

cement : 3 coarse sand ) & jointed with white cement slurry. ( Size of Tiles Fifty Eight Only

shall be 600 mm x 300mm ). Size & Shade of tiles shall be as per

Approved Architecture drawing & as per direction of Engineer in

Item Description Qty. Unit In In

43 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for 7.00 Sqm 2427.83 Rs. Two Thousand Four

jambs and sills of doors & windows using neat cement slurry laid over 20 Hundred Twenty Seven &

mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and Paise Eighty Three Only

jointed with grey cement slurry including racking(Tancha Work) rubbing

and polishing,scaffoldings,tools and tackles,scaffolding etc.

complete(with base of neat cement) as per direction of Engineer in

charge including full rounding the exposed edges as directed.

44 Providing and fixing Alluminium section window having extruded 8.00 Sqm 1568.27 Rs. One Thousand Five

Aluminum Colour anodized section frame main outer size 95mm x 24mm Hundred Sixty Eight &

x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track member size Paise Twenty Seven Only

92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with colour

anodized aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details.

45 Providing and fixing standard extruded of alluminium section of size 63 1.00 Sqm 1163.92 Rs. One Thousand One

* 38.10 * 1.2 mm ( Jindal section NO:2434,@Wt 0.643 Kg/RMT )with colour Hundred Sixty Three &

anodized alluminium frame for ventilation with 5 mm thick frosted glass Paise Ninety Two Only

as details etc complete for Ventilation.

Item Description Qty. Unit In In

46 Providing, Fabricating and fixing M.S. GRILL/GATE of approved 3840.00 Kg.s 75.41 Rs. Seventy Five & Paise

pattern fabricated from M.S. flat, square bars, round bars, c-channel, Forty One Only

Square/round box pipe as per detail Drawings. Rate is inclusive of

welding with grinding smooth wirh two coats of Oil paint and one coat of

yellow Zinc chromate primer coat of approved brand only. Oil paint shall

be used as per approved material list of GSPHCL. Steel must be of ISI

47 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door 7.00 Sqm 8984.90 Rs. Eight Thousand Nine

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Hundred Eighty Four &

Construction of Flush Door is with Pine or southern Yellow Pine Filler and Paise Ninety Only

2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with

Lock rail on Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non

Teak Solid Wood of size 120mm x 65mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush door

shutter having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also warranty against

seasoning related issues like crack, bending, twisting, warping.

Laminates on shutter shall be press by cold press method. Shutter shall

be brought to site in packed PVC bags & pvc coating shall be removed

on completion of work in such a way that shutter & Frame is free from nail

mark & any damages etc. Rates are also Inclusive of all Labors &

Proviging 15cm. Long 6 No of Hold Fast (25mm X 5mm) & 3 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per

Frame and Fixing following S.S. Fixtures And Fastening.

Item Description Qty. Unit In In

48 Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN 5.00 Sqm 4476.00 Rs. Four Thousand Four

DOOR shutter with Frame made from co-extruded three- layer rigid Hundred Seventy Six

PVC foam sheet (single Extruded) with density not less than 600 kg/cbm Only

outer layer 1 mm thick should be of rigid PVC with density of not less

than 1400 kg/cbm manufactured by an ISO 9001-2015 certified company.

Complete as per direction of Engineer-in-charge, manufacturer’s

specification & drawing.

49 Providing and fixing in positon ISI marked Rotational moulded 1000.00 Ltr 3.91 Rs. Three & Paise Ninety

Polyethylene double layer cylindrical vertical storage tank (IS : 12701 ) One Only

water tank size including making inlet and outlet. Overflow and wash out

arrangement with GI connection including using necessary M H for

connection etc. Complete with closed cover including applying two coats

of oil pianting outside the tank etc complete.

50 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & 2.00 No 5470.90 Rs. Five Thousand Four

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil pipe. Hundred Seventy & Paise

Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia, Ninety Only

165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per

Detailed Drawings, Specifications and as per the Instruction of Engineer

In charge. Materials used for the above items Must be list approved by

Item Description Qty. Unit In In

51 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all 2.00 No 565.51 Rs. Five Hundred Sixty

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Five & Paise Fifty One

Drawings, Specifications and as per the Instruction of Engineer In charge. Only

Materials used for the above items Must be list approved by G.S.P.H.C.L.

52 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & 2.00 No 3935.33 Rs. Three Thousand Nine

M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to Hundred Thirty Five &

Pillar Tap, 32mm dia. C.P. brassa waste coupling with Connection 32mm Paise Thirty Three Only

dia waste Pipe up to N.T etc. Complete. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complet as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by G.S.P.H.C.L. Rate also

inclusive of pvc bottle trap of Approved make by GSPHCL.

53 Provinding and fixing SWR/UPVC Multi Nahnitrap( IS 14735) of the 4.00 No 1122.26 Rs. One Thousand One

following Nominal dia. Self cleaning design with top tiles and making Hundred Twenty Two &

good the walls and floors 100mm inlet and 50mm outlet including 150 X Paise Twenty Six Only

150 mm stainles steel jali with grating

54 Providing & fixing Concealed Center Point to wall celing & floor CPVC 50.00 Rmt 654.04 Rs. Six Hundred Fifty

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Four & Paise Four Only

Portable Water of 50 mm. dia. nominal bor tube fitting and clamps

including making good the wall, ceiling and floor etc. Complete

Item Description Qty. Unit In In

55 Providing & fixing Concealed Center Point to wall celing & floor CPVC 16.00 Rmt 443.29 Rs. Four Hundred Forty

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Three & Paise Twenty

Portable Water of 40 mm. dia. nominal bor tube fitting and clamps Nine Only

including making good the wall, ceiling and floor etc. Complete

56 Providing & fixing Concealed Center Point to wall celing & floor CPVC 10.00 Rmt 251.31 Rs. Two Hundred Fifty

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For One & Paise Thirty One

Portable Water of 25 mm. dia. nominal bor tube fitting and clamps Only

including making good the wall, ceiling and floor etc. Complete

57 Providing & fixing Concealed Center Point to wall celing & floor CPVC 14.00 Rmt 206.73 Rs. Two Hundred Six &

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Paise Seventy Three

Portable Water of 20 mm. dia. nominal bor tube fitting and clamps Only

including making good the wall, ceiling and floor etc. Complete

58 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe 10.00 Rmt 245.74 Rs. Two Hundred Forty

with 'O' ring 75mm dia of ISI 13592/92. Rate inclusive of all fittings like Five & Paise Seventy

single or double "Y" with door, reducer, coupler single T with door bend, Four Only

with washer for vertical drain etc.complete and making good the

wall,ceiling and floor.ISI make only joints shall be sealed by pipe sealant.

59 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe 10.00 Rmt 471.36 Rs. Four Hundred

with 'O' ring 110mm dia of ISI 13592/92. Rate inclusive of all fittings like Seventy One & Paise

single or double "Y" with door, reducer, coupler single T with door bend, Thirty Six Only

with washer for vertical drain etc. complete and making good the

wall,ceiling and floor.ISI make only joints shall be sealed by pipe sealant.

Item Description Qty. Unit In In

60 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 26.00 Rmt 302.54 Rs. Three Hundred Two

90mm Dia Complete with Special flings, Compressor type Fittings, with & Paise Fifty Four Only

washer for vertical drain etc. including making good the ceiling and floor

on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and

vertical pipe and 90mm bend at the end near by Ground level rate are

Inclusive of all Necessary Fittings required.

61 Providing and fixing in position PVC Cowelvent to pipe 75 mm dia as 2.00 No 16.47 Rs. Sixteen & Paise Forty

directed. Joints shall be sealed by pipe sealant. Seven Only

62 Providing and fixing in position PVC Cowelvent to pipe 110 mm dia as 2.00 No 28.16 Rs. Twenty Eight & Paise

directed. Joints shall be sealed by pipe sealant. Sixteen Only

63 Providing Supplying and Fixing S4 Channel System (S4 Channel+ Profile 10.00 Each 421.58 Rs. Four Hundred Twenty

Bracket U Bolt Rubber mounted System) for multiple Pipes for External One & Paise Fifty Eight

Vertical Fixed line with wall distance 3" including nuts, bolts, fastners etc Only

complete as per detailed Specifications and as directed by Engineer in

64 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt 10.00 Each 182.83 Rs. One Hundred Eighty

Rubber mounted for Pipe Supporting Clamping System for External Two & Paise Eighty Three

Vertical Fixed line with wall distance 3 including nuts, bolts, fastners etc Only

complete as per detailed Specifications and as directed by Engineer in

65 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive 2.00 No 1309.39 Rs. One Thousand Three

of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Hundred Nine & Paise

Drawings, Specifications and as per the Instruction of Engineer In charge. Thirty Nine Only

Materials used for the above items Must be list approved by

G.S.P.H.C.L.15mm Dia

Item Description Qty. Unit In In

66 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 2.00 No 990.61 Rs. Nine Hundred Ninety

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per & Paise Sixty One Only

Detailed Drawings, Specifications and as per the Instruction of Engineer

In charge. Materials used for the above items Must be list approved by

67 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour 2.00 No 909.08 Rs. Nine Hundred Nine &

& Necessary Fittings etc. Complet as per Detailed Drawings, Paise Eight Only

Specifications and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by G.S.P.H.C.L.

68 Provinding and fixing 600mm x 450mm bevelled edge MIRROR of 2.00 No 850.90 Rs. Eight Hundred Fifty &

superior glass mounted on 6mm thick A.C. sheet or plywood sheet fixed Paise Ninety Only

to wooden plugs with C.P. brass screws & washers.

69 Providing and Fixing S.S. Cloth Hanger (5 Hook) as per detail drawing 3.00 No 249.85 Rs. Two Hundred Forty

and as directed by Engineer In Charge. Rate are inclusive of all material, Nine & Paise Eighty Five

labour, texes. Samrat Brand as Approved. Only

70 Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of all 2.00 No 665.51 Rs. Six Hundred Sixty

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Five & Paise Fifty One

Drawings, Specifications and as per the Instruction of Engineer In charge. Only

Materials used for the above items Must be list approved by G.S.P.H.C.L.

Item Description Qty. Unit In In

71 Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with 2.00 No 1233.57 Rs. One Thousand Two

Exposed Pan & Other Accessories (Sleeve, Lever, Wall Flange) Rate are Hundred Thirty Three &

inclusive of all materials, Labour & Necessary Fittings etc. Complete as Paise Fifty Seven Only

per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Concealed Heavy Stop Cock

Shall be as per the Approved Make List of GSPHCL

72 Provinding and fixing gun metal check or non return full way WHEEL 2.00 No 416.47 Rs. Four Hundred Sixteen

HANDLE VALVE 25mm dia. Rate are inclusive of all matreials, Labour & Paise Forty Seven Only

Necessary Fittings etc. Complete as per Detailed Drawings, Specification

and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL

73 Provinding and fixing gun metal check or non return full way WHEEL 2.00 No 656.86 Rs. Six Hundred Fifty Six

HANDLE VALVE 40mm dia. Rate are inclusive of all matreials, Labour & Paise Eighty Six Only

Necessary Fittings etc. Complete as per Detailed Drawings, Specification

and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL

Item Description Qty. Unit In In

74 Constructing brick masonry chamber for under ground C.I. inspection 6.00 No 3793.18 Rs. Three Thousand

chamber and bends with brick having crushing strength not less than 35 Seven Hundred Ninety

kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of size 455 x 610 mm Three & Paise Eighteen

internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 mix (1 Cement : 1.5 Only

coarse sand :3 graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cment walls & bed connect etc. complete rate

inclusive of outside plaster of 15mm thick in cm 1:3 form top of chamber

and all side up to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size .455m x 0.61 x .07 m with 2 no

of m.s. flat handle in cement concrete 1:1.5:3. including angle frame of

section 40x40x5mm section etc complete.(i) Inside Diamensions

455mm x 610mm and 450mm deep for single/ Multiple pipe line.

75 Extra over above Item No. 74 for every additional depth of 0.1mtr. or part 6.00 No 239.99 Rs. Two Hundred Thirty

thereof beyond 450mm depth for Block masonry chamber 455 X 610mm. Nine & Paise Ninety Nine

Item Description Qty. Unit In In

76 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 40.00 Rmt 396.00 Rs. Three Hundred

SN8 Structured Wall polyethelene Piping systems (Pipe with Ninety Six Only

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double Wall)

for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to

the departmental stores etc. complete. (150mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end

of pipes, sliding over the elastomeric sealing rubber ring placed on the

specified valley of the corrugation at the spigot end, lowering the same

into the trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing the water

tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed

engineering, including carriage of pipes & fittings from site stacks to the

place of laying etc. as per direction of Engineer-in-charge.

Item Description Qty. Unit In In

77 Provinding and laying inegrated cement based proofing treatment of 136.00 Sqm 920.61 Rs. Nine Hundred Twenty

required thickness over the roof including 10mm thick waterproofing & Paise Sixty One Only

cement plaster in cement plaster in cement mortar1:3 and chaina

mosaic fitting and finally finishing the surfase with white cement slurry

and slopping out taerrace slabs with following specification laid to

required slope not flatter than 1:80 ( the thickness of water proofing

treatment near rainwater outlet or the lowest point of the finishedslope

shall not be less then 45mm, including treating the vertical surfaseof the

parapet wall up to 20cms . height above finished level of terracing

including finishing the top with joint less water proofing plaster , curing

testing etc. complete. Rate is including ten years performance of

guarantee bond to be given on stamp paper. (No extra shall be paid for

increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm.

of cement admixed with properly water proofing compound conforming

to IS -2645 and 10 mm thick water proofing cement plaster in Cement

mortar 1:3 over the R.C.C.slab incl. cleaning the surface before

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size

with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm

thick water proofing cement plaster in cement mortar 1:3 (1 cement

coarse sand) admixed with proprietary water proofing compound

conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height incl. rouding of junction of walls.

Item Description Qty. Unit In In

(C) After Two Days of proper curing applying a second floor of cement

(D) Finishing the surface with china mosaic pieces laid on 10mm thick

joint less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed

with proprietary water proofing compound conforming to IS :2645 and

finally finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and specified by

the Engineer In Charge.

78 Providing and fixing Pre-Cast Concrete Kerb stone of gray cement 207.00 Rmt 371.21 Rs. Three Hundred

based concrete block 30cm length,30cm height and 15cm thick of M250 Seventy One & Paise

grade concret as per approved design and including excavation for Twenty One Only

fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

79 Providing and fixing pre-cast Rubber Dye/ Steel Dye inter locking 124.00 Sqm 695.07 Rs. Six Hundred Ninety

concrete block 60mm thick grade of concrete M300 pnumatic Five & Paise Seven Only

compressed/vibrated mechanically and as per approved design

Conforming to IS 15658:2006 including 35mm sand layer for levelling and

filling the joint with sand in proper line and level as per guidelines of IRC:

SP 63-2018 etc. complete.

80 Providing and laying lawn for land scrapping including watering for all 1913.00 Sqm 150.00 Rs. One Hundred Fifty

Item Description Qty. Unit In In

81 Providing and laying Plantations including providing and fixing tree 10.00 No 600.00 Rs. Six Hundred Only

guard.. Rates are also inclusive of maintaining the plants in live condition

at the time of the execution of the building. i.e. Initial starting time. [The

tree shall be planted].

82 SS Letters :- Providing,supplying & Fixing Stainless steel letters 304 25.00 No 1056.52 Rs. One Thousand Fifty

Surface casted letters in Gujarati pattern with spraying colour on surface Six & Paise Fifty Two

etc.complete as directed.Size S.S.letters shall be as described in Arch. Only

Drawing. Coating of the S.S. letters shall be as directed by engineer in

charge.Letter shall be fixed at any height as directed by engineer in

83 Providing Corrugated JSW Pre coated sheet roofing fixed with 72.00 Sqm 1022.75 Rs. One Thousand

Galvanised iron J or L hooks, bolts and nuts 8mm diameter with bitumen Twenty Two & Paise

and G.I. Limpet washer or G.I. Limpet washer with white lead complete. Seventy Five Only

Excluding the cost of Purlins, Rafters, and Trusses. (0.60mm thick)

Civil DTP Amount Rs.

Item Description Qty. Unit In In

84A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm 25.00 Point 461.00 Rs. Four Hundred Sixty

copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated One Only

FRLS wire for earth continuity in FIA approved ISI mark medium class white

colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected on/in Brick Wall / slab along with continuous G.I. fish

wire to draw wires and laid in approved manner zari for PVC pipe and boxes

shall be filled with cement mortar and finishing the surface to match the wall /

ceiling complete with approved make 5/6 Amp. ISI make modular type switch

and accessories mounted in 20 G. G.I. company fabricated metallic box covered

with appropriate front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector 75 mm

deep GI box if require ( make & model approved by EIC and matching colour

with switches accessories) as directed for concealed wiring. Light point. Cat.-

II.(Conductor resistance should be as per IS:8130/1984 ) Necessary sheet must

be erected on all box to prevent mortar going into the box.& for ceiling light

Point & Junction box use deep Junction box of same PVC Pipe make . Length of

point wiring must not increase than 10 mtr. For that necessary switch boards and

their locations must be finalised before execution by agency otherwise payment

will not be done for extra long point. (For future extention, if required, agency

has to erect one higher size metal box and modular plate as per instruction of

EIC. Cost of blank plate shall be paid as per tender item) [Wire must be having

box packing][This item include cleaning(inside/outside) of all GI switch

boards,electric point box,fan box,MCBDB & box cutting plaster finishing for

modular plate without any gap]

84B For Fan Point.(with 6A Modular type switch and Two Module hum free 3.00 Point 648.00 Rs. Six Hundred Fourty

5/6 step EME step type Electronic fan regulator both having ISI Make ) Eight Only

Item Description Qty. Unit In In

84C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 3.00 Point 489.00 Rs. Four Hundred Eighty

mark) Cat. II Nine Only

84D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both 10.00 Point 234.00 Rs. Two Hundred Thirty

having ISI mark) Cat. II Four Only

85 Providing and erecting Medium Class FIA approved and ISI mark white 30.00 Mtr. 24.00 Rs. Twenty Four Only

colour (embossed) RIGID PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution

& clamps on / in wall / ceiling along with continuous fish wire to draw

mains with necessary fittings and junction boxes for following dia. (a)

86A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 80.00 Mtr. 62.00 Rs. Sixty Two Only

KV grade with FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to

be erected on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) (Conductor

resistance should be as per IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour

code. (with 20 mm dia. PVC pipe) [Wire must be having box

Item Description Qty. Unit In In

86B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 30.00 Mtr. 146.00 Rs. One Hundred Fourty

sq.mm. FRLS copper multi stranded conductor for earthing as per Six Only

standard colour code. (with 25 mm dia. PVC pipe) [Wire must be having

box packing] (Conductor resistance should be as per IS:8130/1984 )

87 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible 10.00 Mtr. 37.00 Rs. Thirty Seven Only

pipe with necessary socket, PVC bushes saddle, Check-nuts etc.

complete of following sizes.

88 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked 2.00 Point 712.00 Rs. Seven Hundred

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Twelve Only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires

and laid in approved manner zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the surface to match the wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted in

20 G. GI company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall. (a) 16 Amp. Indicator switch &

No. 6/16 A universal socket white colour suitable for 3 pin top duly both

having ISI mark. (Necessary sheet / tape / polythene / sand must be

erected or filled in all box To Prevent Mortor Going In To The Box) Cat.-II

(Conductor resistance should be as per IS:8130/1984 )

Item Description Qty. Unit In In

89 Providing following type of Modular Type Accessories mounted with 20 G 20.00 Each 16.00 Rs. Sixteen Only

company fabricated metalic box, single mounting base frame covered

with textured / metallic front plate, modules erected with necessary

connection. As desired by Engineer in charge.Blank Plate Single. Cat.-II

90A Providing & Erecting 2.0 mtr. long Earthing system by making minimum 2.00 Each 7025.00 Rs. Seven Thousand

bore of 225 mm dia. in soft soil. Suitable for doing pipe-in-pipe Twenty Five Only

technology earthing. Earthing electric rod must be made from Corrosion

free hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI

mark of Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class

ISI mark reputed Brand. Terminal Size: 70 mm X 100 mm length, Terminal

should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal. The hot deep galvanising

must be done after above process. Galvanised thickness must be

minimum 75 micron anywhere. SS Nut bolt:- 2 nos. with washer suitable

for 14 mm dia. hole must be provided at terminal. Total minimum Weight

(approx.) of earth electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

400 mm X 400 mm depth and Cover should be heavy duty cast iron with

required size of 300 mm X 300 mm X 4 mm thick.

Item Description Qty. Unit In In

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto

02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

90B For above earthing additional charges for boring in hard rock soil (by 2.00 Each 276.00 Rs. Two Hundred

breaker) & filling soft soil in earth pit (certificate for soil have to given by Seventy Six Only

DEE / AE along with photographs)

91 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted 100.00 Sq. 5.94 Rs. Five & Paise Ninety

with red oxide be concealed in wall with necessary plastering & finishing Inch Four Only

with 3 mm thick laminated sheet with grooving as directed of following

depth 3" depth.

Item Description Qty. Unit In In

92 Supplying and erecting 8W led lamps with following wattage capacity of 5.00 Each 111.00 Rs. One Hundred Eleven

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built- Only

surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27

/ B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser

suitable LAMP holder

93 Supplying and Erecting LED indoor fitting of approximately 4feet long 6.00 Each 370.00 Rs. Three Hundred

with LED of wattage 0.2W to 0.5W assemble on single MCPCB with Seventy Only

housing use as a heat sink shall be made from Aluminum extrusion

having enough strength (sample must be approved by EIC) with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D)

Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD : Max.

15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min.

80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M)

Surge protection : Min. 2KV(N) IP rating: IP 20(O) IK rating : IK 02(P) Short

circuit , Open circuit & Reverse Polarity Protection must be provided(Q)

Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

Item Description Qty. Unit In In

94 providing and erecting Polycarbonate body surface mounting LED Bulk 2.00 Each 780.00 Rs. Seven Hundred

head type 9 watt Lighting Fitting with electronic driver having THD<15% Eighty Only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , input voltage

range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver having

THD > 80lm/w., -20degC to +60degC working temperature, AL frame

with Beam Angle 120deg.

95 Providing and erecting 10 watt LED battern mirror light(1 feet/2 feet as 2.00 Each 309.00 Rs. Three Hundred Nine

per Mirror size ) having main housing aluminium extruded & front cover Only

of polycarbonate . Electrically & photomatry parameters are as under :

240 V, 50 Hz, sysem voltage : 10w+10% ,PF 20.95 system Lumens

min.1000 CCT :3000K to 6500K ,CRI >80,THD<15 % ,Delivery Efficiency >

85 % LM 80Certified LED, 30,000 hrs@L70, Elecronic CC driver

insulated copper wire for internal wiring ,IP20, Operating voltage :160 to

270 V, Surge -2KV , length og this fitting decided by EIC

Item Description Qty. Unit In In

96 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 8.00 Each 805.00 Rs. Eight Hundred Five

to 0.5 Watt assembled on single MCPCB, with housing used as a heat Only

sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(F) Spot Light 425 Lumens, Surge-2KV

97 Supplying and Erecting Of L.E.D. type High bay fixture having Power 6.00 Each 5204.00 Rs. Five Thousand Two

Consumption of following watts with, Input Voltage 110 - 290 V.AC with Hundred Four Only

full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver used

for maximum power saving, Best Quality Aluminium alloy housing and

aluminium Dome for better heat dissipation, CCT Cool white (6000K), CRI

80, Beam angle > 120 degrees, working temperature -20 deg c to +55

deg c, Body IP 65 (A) 70 to 90 watts

Item Description Qty. Unit In In

98 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT 3.00 Each 1929.00 Rs. One Thousand Nine

No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per Hundred Twenty Nine

below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Only

Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:

minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation:

'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total

Body: Top & Bottom should be alluminium, (10) Blade: Aluminium approx

1.1 mm thick, (11) Colour: White high grade powder coating, (12)

Canopy: Two Nos. Heavy duty, (13) Condenser: Min. 1.5 MFD (15%

Tolerence) as per IS:1709-1984, (14) Down road: up to 1.0 mtr as per site

requirment, (15) Required fixing accessories, (16) 3 core 0.50 sq.mm ISI

wire as per site requirment, (17) No vibration and noise due to

mechanical parts. (18) Safety wire provided by manufacturer with ceiling

fan. (Agency has to erect safey wire with ceiling fan and checked with

EIC) (OEM has to approved model as per tender specification and tested

99 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the 3.00 Each 125.00 Rs. One Hundred Twenty

RCC bars up to 50 mm Length each side & piereced through 16 Gauge Five Only

G.I Box having 125 mm dia & depth of 75 mm complete erected

concealed in ceiling with necessary modular type Round plate

100 Supplying and erecting approved make oscillating type bracket fan A.C. 1.00 Each 2509.00 Rs. Two Thousand Five

230 V. 50 cy/s 400/450 mm sweep wall mounted with height adjustment Hundred Nine Only

and rotary tilting device complete with guard, flexible Core plug top

complete erected with lead wires as directed.

Item Description Qty. Unit In In

101 Supplying & erecting approved make low noise Decorative exhaust fan 2.00 Each 1687.00 Rs. One Thousand Six

having size 200 mm with 1350 RPM with round / square frame Hundred Eighty Seven

ABS/metalic body with Grill and inbuilt lowers. Only

102 Providing ad erecting approved make single phase Double Door metal 2.00 Each 4537.00 Rs. Four Thousand Five

clad D.B. as per relevant indian standards ammended upto date. Hundred Thirty Seven

Supplying and fixing following way single phase MCB distrubution board Only

of company fabricated with sheet box with powder coated inside and

outside after apply seven tank chemical process of MCBDB Door, back

Side & Body must be made of 1.2 mm thick CRCA sheet cover complete

with suitable integral single piece construction tinned copper busbar and

link with all necessary interconnection and with necessary size MS frame

for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as

per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make neutral &

Earthing link with isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors for all

incoming and outgoing circuits, with suitable size FRLS PVC insulated

copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth

bar, din bar, detachable gland plate, interconnections, powder painted

including earthing etc.

Single phase incoming and horizontal single phase outgoing.

Item Description Qty. Unit In In

For 8 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp to

32Amp SP MCB:-4 Nos as per site requirement & Instruction of EIC)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should

be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site

as per requirement

103 Providing & erecting 240 V MCB Double pole switch for Motor and 3.00 Each 599.00 Rs. Five Hundred Ninety

inductive load (C curve) having 10 KA breaking capacity & confirms to Nine Only

IS:8828 with same company metal box with earthing terminal having

following capacity with necessary Numbering with oil Paint by painter.

104 Supplying & erecting 12 mm thick backelite sheet of approved make and 1.00 Sq. 2289.00 Rs. Two Thousand Two

grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for Mtr. Hundred Eighty Nine

fixing ICDP SWITCH and energy meter (contractor shall make approved Only

drawing of Bakelite sheet To arrange required No. of Energy meter &

ICDP switch -busbar etc. as per Actual space available in electrical room

Item Description Qty. Unit In In

105 Providing and erecting metalic danger notice board for MEDIUM 2.00 Each 69.00 Rs. Sixty Nine Only

VOLTAGE installation to be erected as per I.S.

106 Supplying & erecting Sintex or approved make SMC press moulded 2.00 Each 890.00 Rs. Eight Hundred Ninety

composite FRP. loop-in, loop-out approx. 2mm thick box complete with Only

bakelite connector strip 4way & hinged doors having locking

arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following size of box.a)

300mm x 200mm x 100mm [deep]

107 Providing & laying HDPE Double walled corrugated pipes (DWC) 300.00 Mtr. 117.00 Rs. One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Seventeen Only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth to

be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as

per original. (A)For Outer dia.50mm and Inner dia. 38mm (Test

Certificate to be Submitted)

108 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 400.00 Mtr. 361.00 Rs. Three Hundred Sixty

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be laid One Only

on wall with suitable G.I. heavy guage 1.0mm thick cable clamp or in

existing DWC pipe underground or road crossing or floor. (a) For

core x 4 sq.mm. (For SL in Garden supply tapping From RSI Office

or Sump Room and Main Gate Security Cabine supplay taping From

MT Section and SL near Eantry Gate

Item Description Qty. Unit In In

109 Providing & fixing double compressed heavy duty flange type brass 15.00 Each 43.00 Rs. Fourty Three Only

cable gland with rubber ring for P V C insulated armoured cable

complete with outgoing tails, insulating tape etc. For following size

cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI, Comet Make

110 Providing & fixing Solderless crimping type Copper lugs conforming to 400.00 Each 8.00 Rs. Eight Only

IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

111 Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte 50.00 Mtr. 141.00 Rs. One Hundred Fourty

A multi stranded, annealed copper conductor with heat resistant PVC One Only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.For One wire 16.00 Sq.mm

111 For One wire 6.00 Sq.mm 50.00 Mtr. 56.00 Rs. Fifty Six Only

112 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as 20.00 Mtr. 171.00 Rs. One Hundred

directed by Engineer-in-charge. For 25 mm dia. Seventy One Only

Item Description Qty. Unit In In

113 Supplying and erecting approved make Octagonal pole made from HR 5.00 Each 11410.00 Rs. Eleven Thousand

sheet steel. The pole should be made as per IS. and shall be coated with Four Hundred Ten Only

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box with Hot Deep Galvanised door

having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail & MCB , Brass stud

type terminal and arrangement for cable termination to be erected

on RCC foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel

rainforcement of RCC FE 415, 3) Clear cover to rainforcement 50mm,

4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep galvanized

average 70Micron, 7) Detail drawing will be given by corporation. For

Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long hot

deep galvanized J-Bolt, nuts, washers with 1300mm under ground and

200mm above ground level and 450mm dia. Foundation in 1:2:4

114 Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 5.00 Each 369.00 Rs. Three Hundred Sixty

mm OD and 50 turns (length of turns approx. 200 mm) and having Nine Only

additional continuous streight length of 3.00 mtr at open end and should

be connected to earthing bolt and burried in 1.5 mtr deep specially

prepared earth pit complete with salt and charcoal/coke as required for

coil type earthing. (Approx weight of coil 1.0 to 1.1 Kgs)

Item Description Qty. Unit In In

115 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 200.00 Mtr. 77.00 Rs. Seventy Seven Only

grade ISI marked copper wires of following size to be erected as

directed. 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark.

116 Providing, erecting, fabricating the M.S. structure as per requirement of 50.00 Kg. 75.41 Rs. Seventy Five & Paise

site as per structure design Including proper size approved by EIC of Fourty One Only

M.S. angles, flats, bars, square pipe, channels, sections

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and

finishing duly painted with Asian/Nerolac make premium quality oil paint

and true careyellow zinc primer,asian paint make with erection on site as

per direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

Item Description Qty. Unit In In

117 SITC of Outdoor aesthetically designed LED Flod Light Luminaire with 16.00 Mtr. 6228.00 Rs. Six Thousand Two

total consumption of Max. 90 W with single piece die cast aluminium Hundred Twenty Eight

housing, high power LED shall be mounted on high quality metal core Only

PCB with extremely precison designed heat sink complete with IP66

protection Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to comply both

LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The Watt capacity of

Each LED Must be > 4 Watt in Street Light Fitting.The Fixture Should be

able to be Pole Mounted and also bracket mounted, provided with high

quality driver for protection against high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture should meet the

following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, and total lumens not less then 9900, CCT >

5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV

integral and 10 KV non integral The Separate Potted driver should have

over current, over voltage protection, short circuit protection so that the

fixture recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of 0 deg to

deg and humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

Item Description Qty. Unit In In

118 Supplying and erecting Fabricating terminal box for street light pole 10.00 Each 702.00 Rs. Seven Hundred Two

made from 16 SWG M.S. sheet having following size complete with fixing Only

arrangement for terminal board, with necessary hole for wire entry and

exit from the box. The box shall be provided with cover and hinges on

one side and bolting at other end The box shall be fixed by clamps

fabricated from 25mm x 6mm flat.The box shall be painted with one coat

of red oxide and two coats of paint having following box size 330 mm x

260 mm x 140 mm (depth). And Providing and fixing Terminal board of

size 5.0 x 127 x 152.4 mm. bakelite sheet with 15 Amp. kitkat pattern

porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of

red lead paint. (For Terrace Fitting 8 nos and 1 nos Junction if Required)

119 For Wall & Terrace Street light Bracket:Providing and Fixing of wall and 6.00 Each 487.00 Rs. Four Hundred Eighty

A terrace bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside Seven Only

diameter and length suitable for building face for fixing the brackets and

having spread of Upto 0.70 mtr. length with suitable degree angle as per

site situation suggested by EIC. vertical plane and suitable welded

stiffner reducer and nipple with check nut complete painted with one

coat of red oxide and two coats of alluminium paint (Zinc Coating before

alluminium Paint is mandatory)with . complete with 150*150*2mm thick

G.I plate with 4no heavy duty galvanized jasti khila of required size or

Single arm bracket (pipe in pipe type) suitable for terrace as per design

given by EIC Considering parfait, height ,width and total height of

building and type of led fitting . (a) For single arm bracket. (Jindal /

Asian / Tata / Surya Prakash make Only) (Fabricators:- Ambica / Fab /

Bajaj / Impression equipment Only) (Test certificate to be submitted)

Item Description Qty. Unit In In

119 (B) For Double arm bracket. (Asian Fab Bajaj Ambica make only) Test 2.00 Each 616.00 Rs. Six Hundred Sixteen

B Certificate To Be Submited. Only

120 Providing & Erecting Univesal Astro interlligent Street light Control 2.00 Each 12895.00 Rs. Twelve Thousand

System insu with weather proof box for indoor allplication 5KVA ( as Per Eight Hundred Ninety

atteched Specification) Five Only

121 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load 2.00 Each 1104.00 Rs. One Thousand One

(C Curve) having 10KA breaking capacity & confirms to IS :8828 with Hundred Four Only

same company metal box with earthing terminal having following

capacity with necessary Numbering with oil Paint by painter. [c]40 Amp.

Electrical DTP Amount Rs.

Total DTP Amount Rs.

Executive Engineer

Signature of Contrator Gujarat State Police Housing Corp. Ltd.