Construction of Animal Birth Control Centre Building of 50 Kennel Capacity at Kolakusma under DMC, Dhanbad

1.2.11.2.1RCC FRAMED STRUCTURE (Upto six storeys) Area of Building Floor Height - 3.60 m Hospital

2.12.1Internal water supply & sanitary installations

2.32.3Internal electric installations

6.8.26.8.2Boundary wall with 1500 mm high wall and 600 mm high MS grill including 2100 mm high steel gates at every 100 metres Precast RCC wall in M40 grade concrete comprising shaped 250 x 230 mm RCC posts fixed in ground and 70 mm thick RCC wall panel inserts including MS Gate of 15' at appropriate location Total Length of Boundary Wall

6.56.5STORM WATER DRAIN Perimeter

6.66.6RAIN WATER HARVESTING

5.25.2Over Head Tank Overhead tank with staging height upto 20 metre

5.55.5Underground sump

4.23(A) RCD Providing and laying factory made cement concrete interlocking paver block of M-35 grade made by brick making machine with strong vibratory compaction of approved size, design and shape laid in required colour and pattern over bed as per relevant IRC/Code, filling the joints with fine sand etc off complete as per the direction of Engineer-in-charge

8.21.18.21.1Supplying, Installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 20 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium Iron Phosphate Battery (LiFePO4), charging time 6-8 hours, Battery backup time 12 hours (minimum), LED fixture 20 watt, Input voltage: 12V DC, Operating temp range -5 °C to 50 °C, Internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, IP-66,IK-08, CRI>70, under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/ill as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K/(As per American National Standard Institute (ANSI Bin)), life time (LED, Driver & electrical circuitry) of 50K hours lamp buring hours till the 70% of Initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. All as per pre approved by Engineer In-charge complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC Insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm sneed