Annual Maintenance of materials Flushing of bore wells Cleaning of sumps and Rewinding of Motors to Sri KT and Sri KRT temples in water works sub division II Tirupati for the year 2026 27

Supply of following dia Gun Metal Gate (GM PEET) Valves as per IS - 778 class -I indian make heavy type of the following NB sizes

Supply of 12.7mm NP stop cock Indian make heavy duty 400 grms

Supply 12.7mm Brass stop cock (Long Body) Indian make heavy duty (400 grms)

Supply 12.7 mm dia NP push cock 1st quality

Supply and fixing 12.7 mm dia NP pillar Cock heavy duty 1st quality Indian make (400 grms)

Supply & fixing 38.10mm dia PVC solid waste pipe outlet

Supply of 25mm Saddles with Base

Providing, installation, testing and commissioning of dual Plate type non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required. Makes:BDK/NEU-G/Leader/Zolotto/SANT/Honeywell

Supply of the following dia of MS Flanges of approved make with ISI mark.

OD 75 mm dia MS Flanges

OD 50 mm dia MS Flanges

Supply of 80mm dia C.I reducing Flanges of approved make with ISI mark.

Supplying & fixing leather washers for 12.7 mm bib tap and stop cock

Supply of PVC tape rolls of size 18mm width & 9 mtrs length (make steel Grip)

supply and delivery of bolts and nuts with double washers including taxes and conveyance etc., complete(1/2" to 1")

supply of GI pipe plug of following series

supply of SYMET BIB COCK (CAT.NO:121) Standard 15 mm size as per IS 9763-2000 with ISI mark male thread with deluxe handles,86 mm long and 102 mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 90gms.

Supply of CPVC pipes, SDR 11 (class 1) following dia

Supply of CPVC pipes, SDR 13.5 (class 2) following dia

Supply of CPVC fittings following

Elbow 90 degrees following dia

Reducer Elbow 90 degrees following dia

Tees following dia

Coupler (Reducing Bush) following dia

Union following dia

End Cap following dia

Tank Nipple following dia

Reducer Coupler following dia

Reducer Tees following dia

20 mm X 20 mm X 15 mm

25 mm X 25 mm X 15 mm

25 mm X 25 mm X 20 mm

32 mm X 32 mm X 15 mm

32 mm X 32 mm X 20 mm

32 mm X 32 mm X 25 mm

40 mm X 40 mm X 15 mm

40 mm X 40 mm X 20 mm

40 mm X 40 mm X 25 mm

40 mm X 40 mm X 32 mm

50 mm X 50 mm X 15 mm

50 mm X 50 mm X 20 mm

50 mm X 50 mm X 25 mm

50 mm X 50 mm X 32 mm

50 mm X 50 mm X 40 mm

Bushing following dia

Elbow 90 degrees (Brass) following dia

Tee (Brass) following dia

15mm x15mmx15mm dia

20mm x20mmx15mm dia

20mm x20mmx20mm dia

25 mm X25mmX15 mm

25 mm X 25mm X 20 mm

25 mm X 25 mmX25mm

32 mm X 32 mm X15mm

Male Adapter Brass Threaded - MABT following dia

Reducing Male Adapter Brass Threaded - MABT following dia

Female Adapter Brass Threaded - MABT following dia

Ball Valve following dia

Power Coated Metal Clamp following dia

1 step CPVC Cement following dia

Supply & Fixing 76.2 mm dia PVC elbow Ist quality

Supply of Plastic storage tank lid with hinges

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

22.20mm ODPipe - SDR 11

28.60mm ODPipe - SDR 11

34.90mm ODPipe - SDR 11

41.30mm ODPipe - SDR 11

54mm ODPipe - SDR 11

Supply of following Gun metal (GM) Ball valves with SS Ball and SS spindles as per IS class-1 Indian make heavy type

Flushing of bore well of dia 165/150 mm with power rig at an average pressure of 150 PSI, including crew charges, completely done to the satisfaction of the department including detachable of all accessories and refix all materials as per the original condition including all labour charges, but excluding cost of materials & excluding taxes etc., complete. For 165/150 mm dia Bore wells.

Manufacture, Supply and Delivery of Unplasticised 180 mm dia PVCs Pipes of 6 Kgs/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Engaging workers through contractor for cleaning of various sump wells, Over Head Tanks, Syntex Tanks, other Terrace RCC water Tanks, water pipe line repairs works and any other works related to maintenance of water supply items as directed during execution etc., complete in T.T,.D Institutions, Hostels, Colleges, Hospitals, Staff Quarters, Countries, Guest Houses, Temples etc., complete. - helpers/cleaners/ Sweepers/ Scavengers/ Choukidaris/ Security guards/ Office boys

SEMI SKILLED WORK MEN [2nd Class] Plumber

helpers/cleaners/ Sweepers/ Scavengers/ Choukidaris/ Security guards/ Office boys.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer roto-moulded confirming to IS:12701 approved brand & manufacture with suitable cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Lifting of submersible pump sets of 3HP/5HP/7.5HP including G.I. Pipes of 50 mm dia from the existing bore wells of size 163 mm dia. And re-erection of pump set in the same bore well including incidental charges etc., complete as directed during execution. Note: The rate is purely for labour component only. The repair/rewinding of motors/pumps does not come under this scope of work. (The rate is Excluding GST)

Rewinding of the following Various capacities of Minor & Medium HP Monoblock burnt motors Single phase/Three phase with suitable gauge of copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/ minor hard ware items viz, soldering, bolts and nuts, hylam sheet strips etc., if any and to keep motor in good condition. (The following rates are EXCLUDING GST)

5.00 HP Electric Motor of any make.

3 HP Electric Motor of any make.

2 HP Electric Motor of anY ma ke

1.5 HP Electric Motor of any make.

Replacement of the following sizes of ball bearings for single phase /3 phase motors. (The following rates are EXCLUDING GST)

Ball Bearings of SKF make No:6303

Ball Bearings of SKF make No:6304

Ball Bearings of SKF make No:6305

Ball Bearings of SKF make No:6306

Ball Bearings of SKF make No:6307

Ball Bearings of SKF make No:6308

Ball Bearings of SKF make No:6309

Ball Bearings of SKF make No:6310

Ball Bearings of SKF make No:6311

Ball Bearings of SKF make No:6312

Ball Bearings of SKF make No:6313

Rewinding of the following various capacities of Burnt Submersible Motors and other minor HP motors with suitable gauge insulated PVC copper wire varnishing, tapping, fitting etc., complete with over hauling and replacement of terminal plate/ minor hard ware items viz, soldering, testing of out going wires, bolts and nuts, painting with approved colour etc., and keep the motors in good condition. (The following rates are EXCLUDING GST)

7.5 HP Submersible Motor of given make

5 HP Submersible Motor of given make

Replacement of bush bearings for 12.5 motors necessary greasing, fitting etc. (The HP submersible/ Monoblock following rate is EXCLUDING GST)

Repairing and reconditioning of Monoblock and jet pump single phase/ Three phase for 0.5HP,1HP,1.5HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Suitable Stud bolts and nuts, making Cap Holes, Body holes, Threading etc.,

Monoblock shaft bend removing and turning charges etc.,

Check nut welding, threading, preparing new check nut joint

Impeller key way welding, providing suitable key way

Impellor check nut welding and supply of new check nut and threading

Repairing and reconditioning of Monoblock and jet pump single phase/ Three phase for 2HP, 3HP, 5HP and 7.5HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Suitable Stud bolts and nuts, making Cap Holes, Body holes, Threading etc.,

Monoblock shaft bend removing and turning charges etc.,

Check nut welding, threading, preparing new check nut joint

Impeller key way welding, providing suitable key way

Impellor check nut welding and supply of new check nut and threading

Repairing and reconditioning of Monoblock and jet pump 3phase for 10 HP, 12.5HP, 15HP, 20 HP and 25HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are Excluding GST)

Gunmetal bush joint

Flamber door mouth sleeve

Bearing outer sleeves

Shaft bearing, seating, welding, turning charges etc.,

Front door mouth sleeve

Gland bore sleeve fitting

Cap holes, Body holes and Threading

Shaft bend removing, turning and finishing

Check nut welding, threading, new check nut joint

Impeller key way gas welding, new key way

Impellor check nut welding and threading

Repairing and reconditioning of Submersible pump for 0.50HP, 0.75HP, 1HP, 1.5HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Thrust bearing plate

Providing shaft bushes

Impellor gas welding, turning and finishing

Stage inner bushes

Shaft inner holes threading providing suitable bolts fitting etc.,

Pump removing, cleaning, testing for complete Pump Set

Repairing and reconditioning of Submersible pump for 2 HP, 3HP, 4HP, 5HP, 6 HP and 7.50 HP capacities for supplying and fixing, repairing and labour charges for the following items as directed during execution etc. (The following rates are EXCLUDING GST)

Thrust bearing plate

Providing shaft bushes

Impellor gas welding, turning and finishing

Stage inner bushes

Shaft inner holes threading providing suitable bolts fitting etc.,

Pump removing, cleaning, testing for complete Pump Set

Repairing and reconditioning of panel boards, starters single phase/three phase of Mono block and jet pump for 0.5HP, 0.75HP, 1HP, 1.5HP, 2HP, 3HP,5HP and 7.5HP capacities for supplying and fixing repairing and labour charges as directed during execution etc. (The rate is Excluding GST)

Repairing and reconditioning of panel boards, starters three phase of Mono block and jet pump for 10HP, 12.5HP, 15HP, 20HP and 25HP capacities for supplying and fixing repairing and labour charges as directed during execution etc. (The rate is Excluding GST)

Supply of 3 core 4.0 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes:V-Guard/ Bonton /Finecab/ HPL /Million/ Fortune Art /Sudhakar/ Orbit/ Tamra/ Anchor /Plaza/ Vihan/ Spykaar/ Ollvin/ Laser/ Beljin/ Rhino/ Standard/ Vimal

Supply and Transportation of 3.00HP 15Stage star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 4" Bore well.. Makes: Kirloskar /Crompton /Texmo /CRI / KSB/ Lubi/ PSG/ AryenVarsha/ Falcon/Prithvi