Redevelopment Of Zaverchand Meghani Garden At Tp No. 04 (Ashwinikumar Navagam), FP M-2 in East Zone-A (Varachha) Surat.(2nd Attempt)

ITEM NO DESCRIPTION QTY.

RATE UNIT AMOUNT

Area Development Work

Box cutting the road surface to proper slope and camber for making a base for

1 road work including removing the excavated stuff and depositing on the road 525 104.2 C.M.

side slope as directed upto 50Mt.lead.

Excavation for foundation including sorting out and stacking off useful materials

2 and disposing of the excavated stuff up to 50 mt. lead and all lift, watering

( 1 ) up to 1.5 mt. Depth 0 117.26 C.M.

Preparation of subgrade with compacting, Leveling and consolidation of

3 subgrade with miniroller/plate vibrator machine including watering and filling in 1740 4.93 S.M.

depression occur the process as directed by engineer in charge.

Providing & laying Granular Sub Base confirming to Grading II of Table 400.2 of

compacted th. of 150 mm with specified graded stone metal and sand mixed

in place and laid with mechanical means spreading with motor grader and

compactiong with vibratory roller having miimum 80-100 KN static weight to

achieve desired dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

Providing & laying or Fixing of River pebbles (Size as per Architect/Consultant

Suggesion and instruction) with specified graded stone metal and sand mixed

in place and laid with mechanical means spreading with motor grader and

compactiong with vibratory including all material, labour, machinery with all

leads and lifts etc. comp. with conveyency charges etc.as per directed by

engineering incharge.

Providing and filling rubbles including hand packing and filling interstices with

6 quarry spalls behind abutments and between returns as directed. 405 1054.26 C.M.

R & B SOR. CH-27 27006A

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. Excl. cost of form work in :(a) foundation &

Providing and laying cement concrete 1: 4: 8 (1 cement : 4coarse sand :8

8 graded stone aggregates 40 mm nominal size) and curing complete

exxcluding cost of formwork in:

(A) Foundation and plinth 0 2680.21 C.M.

Filling in trenches with available excavated earth in layer not exceeding 20 cm

in depth consolidating each deposited layer by ramming & watering

Providing & filling in plinth with yellow soil/Good Quality Garden Soil(Free From

10 Inert Material) or selected soil in layers of 20 cm. Th'. Incl. watering, ramming & 1030 289.06 C.M.

consolidation etc. complete.

Providing and filling in foundation and plinth with available of Mixed soil or

11 selected soil in layers of 20 cm. thickness including watering, ramming and 10 206 C.M.

consolidation as directed by engg. incharge etc. comp.

providing and laying 200 micron (LDPE) plastic sheet on prepared sub base as

per instruction of Engg. In charge etc. complete.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted

thickness over the base including necessary compaction, watering etc.

complete. Item includes leveling by using vibratory plates compacted

machine and as directed by engineer in charge

Providing and fixing c.c m-20 grade (Size 300mm X 380mm) purchased from

SMC's approved paverblock manufacturer & setting in line level and in truly

vertical postion, including filling joints in C.M. 1:1 (1 part of cement : 1 part of

14 stone dust ) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse

sand) including watering etc. complete and as directed by engineer in charge.

CHAMFERD EDGE KERB (size & colour as per Architect/Consultant Instruction &

R.C.C kerb 300 mm Width, 125 mm Thickness and 380 mm Height 0 605 R.MT

Providing 125mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 45 Cm X 12.5 cm) bull nose kerb approved Brand paverblock

manufacturer & setting in line level and in truly vertical postion, including filling

15 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth pointing in 10 765 R.MT

C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb 450 mm Height

and 125 mm Thickness)

Providing 125 mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 30 Cm X 12.5 cm approved Brand manufacturer & setting in

line level and in truly vertical postion, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of cement :

part of coarse sand) including watering etc. complete and as directed by

engineer in charge. (R.C.C kerb 300 mm Height and 125 mm Thickness)

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line, level and in truly vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement :

part of coarse sand) including watering etc. complete and as directed by

engineer in charge.

Providing 150mm th. Ready made Vacuum wet Pressed c.c. kerb of strength M-

25 (Size 60 Cm x 77.5 Cm X 15 cm) bull nose kerb approved Brand paverblock

manufacturer & setting in line level and in truly vertical postion, including filling

18 joints in C.M. 1:1 (1 part of cement : 1 part of stone dust ) smooth pointing in 10 1058 R.MT

C.M. 1:1 ( 1 part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (R.C.C kerb 775 mm Height

and 150 mm Thickness)

Providing interlocking type Rubber moulded cement concrete paver block of

approved shape, design & colour having 60mm thickness (M-35) purchased

from SMC's approved paverblock manufacturer only & fixing of fine sand

bedding. Item includes levelling by using vibratory plates compacted machine.

Item also includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete. (With colour)

Providing and Fixing interlocking M-35 60 mm thick HSF & ETF paver block The

paver block is fixing on 75mm thik.sand bed in proper line,level with watering

and compaction etc. as per directed by engg. and architect (size & colour as

per Architect/Consultant Instruction & Suggesions)

Providing and Fixing interlocking M-35 75 mm thick paver block Grass/eco

paver The paver block is fixing on 75mm thik.sand bed in proper line,level with

watering and compaction etc. as per directed by engg. and architect (size as

per Architect/Consultant Instruction & Suggesions)

Providing and Fixing interlocking M-35 60 mm thick Cobble Square paver block

The paver block is fixing on 75mm thik.sand bed in proper line,level with

watering and compaction etc. as per directed by engg. and architect (size &

colour as per Architect/Consultant Instruction & Suggesions)

Provideing and laying EPDM ( Ethylene Propylene Diene Monomer) in multi

colour Water Resistance,Durable, UV Stable, High & Consistent Quality Product

Density 1.6+-0.05 G/CM3, Hardness 60+-4.5 SHA, Tensile strenth > 5M Pa,

23 Elongation at break 500%, Bulk Density (1-3.00 mm Approx), 670 g/dm3, polymer 360 2539.36 S.M.

content > 22%, uv resistant 4 grey scale rating, Flammability - HB. Total Thickness

35MM (First Layer of 29mm Thick Black SBR & Second Layer of 6MM Thick

Providing and Fixing 60 mm thick Flagstone in size as per officer incharge. The

flagstone is fixing on 75mm thik.sand bed in proper line,level with watering and

compaction etc. as per directed by engg. and Architect/Consultant Instruction

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim powder floater, curing etc.

Internal road 0 5981 C.M.

Providing & laying Mud cement concrete Pavement using 1:1.5:3:1 (1

cement:1.5 sand:3 graded:1 Mud Soil stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a skim powder

floater, curing etc. complete.

Internal road 0 5179.08 C.M.

Cutting of Groove 5.00 mm th. In VDS for depth of 2/3 of total thickness with

filling of Bitumen

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work including

binding and placing in position etc. comp.

Upto G.L./P.L. 3750 76.21 Kg.

Supplying and laying flexible gabions of size 1m x 1m x 1m (mesh size 100mm x

100mm)of rope 9mm dia P.P. materials filled with 10 to 40 kg trap rubble stone

(approximate weight 1.5 tonne) as per drawing including packing, inter locking

29 of stones and stiching, fusing top of gabione and tying to each other and laying 0 2103.83 Nos.

to the required line, level, slope with all leads and lifts as directed etc.

complete. Considering lead of 45 km for 85% & 15 15 km for 15% (For Rubble

Providing and laying geo fabric fitter (GWF- 50-300 category) over the

excavated surface as per specification including stitching with overlap to

design profile as directed in tidal range etc. complete all lead and lift as per

technical specififcation and engineer in charge

Providing and Fixing Of M.S. cycle Stand As Per Architect Suggesion &

Insutructuins & Drawings.

Providing and Fixing Of Sculpture & Mural Weight 100 to 120 KG As Per Architect

Suggesion & Insutructuins & Drawings.

providing and laying of Cement Mortar 1:4(1-Cement: 4- fine sand ) Includ.cost

of form work but exclu. Cost of reinforcement for reinforced concrete work.

Under Ground water Tank : Providing and laying ordinary C.C. 1:1.5:3 mix for

R.C.C. work including boxing centering,vibrating, curing and mixed with

approved water proofing cement compound or "CEMWET" or "PIDICRETE LW"

intergral water proofing addmixture as water proofing agent to be mixed with

50 kgs. cement bags shall be as recommended by the manifacture of the

water proofing material, concrete work for top, bottom slab and side pardi for

underground tank and item inclusive necessary excavation and refilling the

available earth, 15 cm th C.C. 1:4:8 for bedding conc., half B.M. in C.M. 1:4

34 outside wall, inside pardi as per design, 10 mm th water proffing cement plaster 15000 5.46 LIT.

in C.M. 1:3 with smooth finishing, watering etc. comp. to all inner face of tank

curing etc. comp. incl. PVC steps, outlet , inlet, over flow and wash out pipe

arrangment as necessary with M.S.Cover of 25 Kgs. with locking arrangement

fixing glazed tiles of approved make such as Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell or equivalent make of commercial quality of

approved colour and size to sides and bottom of water tanke xcluding free

board of 20 cm etc. as per structural drawing excl. steel and as directed by

Engr. in charge. Note: 3 tanks of capacity 50000 Litres.

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and

35 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 6 819 SM

sand ) finishing with flush pointing in white cement.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bellmakeat all floor levels, in flooring, treadsof

steps&landings laidonabedof12mm.Av.Th.C.M.1:3(1cement :3sand) finished

with flush pointing in white cement etc.com. For all floors

Providing&constructionsimplechamberof23cm. th'B.B.MasonaryinC.M

1:5withcement plaster15mmth' inC.M.1:3 inside&outside toexposed faces,R.C.C.

topslabwith1:2:4mix ( 1cement: 2Sand : 4Gradestone aggregate20mmsize)

,Foundationconcrete1:5:10&fixingC.I. coverwith frametobenot

lessthan38kg.Ontopetc.comp. Insidedimension,455x 610 mm &450 mm deep for

Providing, Lowering & laying of Readymade M-25 Vacuum wet Pressed Water

Drain (Dished) Channel (600 x 300 x 100 mm ) approved Brand manufacturer &

setting in line level and in truly vertical postion, including filling joints in C.M. 1:1

(1 part of cement : 1 part of stone dust ) smooth pointing in C.M. 1:1 ( 1 part of

cement : 1 part of coarse sand) including watering etc. complete and as

directed by engineer in charge.

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc. Comp

Providing and Supplying ISI standard R.C.C. pipes (of Sulphate Resisting

Cement) in standard lengths of following class and diameter suitable for either

40 collar joints or rubber ring joints including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

department stores, stacking etc. complete.(IS 458 / 1989)

Lowering, laying and jointing RCC pipes in C.M. 1:1 of following diameters in

proper position, grade and alignment at all level as directed by Engineer-in-

charge including conveyance from stores to site of work, labour, giving

hydraulic testing as per ISI code. - Class NP3 Test Pressure 0.7 Kg. / sq. cm.

NP3 Class RCC Pipe

(i) 250mm dia 150 967.6 RM

(ii) 300mm dia 375 1364.2 RM

(iii) 350mm dia 5 1709.45 RM

(iv) 4000mm dia 5 2285.45 RM

(ii) 500mm dia 0 2850.45 RM

(ii) 600mm dia 0 3633.6 RM

(iv) 700mm dia 0 4698.05 RM

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint in

beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams, hip & trussed purlins connected to common

raffers & the like.

Providing & Fixing of 100mm dia M.S. Bollard height 900mm at fixing with

42 nessasory hardwares incl. cleaning the surface of all dirt, dust & other foreign 2 2730 Nos.

matter etc. Comp.

Demolition including stacking of serviceable materials with all lead and lift. (i))

Demolition of brick work and stone masonry including stacking of serviceable

44 materials and disposal of unserviceable materials with all lead and lift. (i) In 187 550.4 CM

Removing and scraping of old deteriorated plaster of any thickness from wall /

45 RCC member including stacking of serviceable material and disposal of 40 19.57 SM

unserviceable from site of work with all lead and lift.

Providing and Fixing Of Water Curtain Foutain including (China mosaic tiles,

water proofing, pardi, reinforcement, plumbing work, mortor etc. relevant

accessories to be added in item description) of 1 HP. motor With Plumbing Work

As Per Architect Suggesion & Insutructuins & Drawings.

Providing and fixing decorative sculptures (custome made) of Altra Resins

Thickness 3mm To 5mm or Cement material and iron materil and fixing them

properly at places & Item incl. necessary excavation & refilling the available

earth, 15 cm th' C.C 1:4:8 for bedding concrete and concrete foundation with

all fixtures etc. as per detail drawing and instruction of Architect/Engg.

Filling in Red soil as aproved by engineer in charge For Red Soil layers in

including watering, ramming and consolidating and achieving required density

soil must have property of not eroding ,holds water and soft. The rate includes

all labour and machinary and spreading in layers and transportation complete.

Total amount of Area Development Work

Total amount of Area Development Work

Horticulture Work

LAWN : Area cleaning and side grading, removing unwanted materials, plants,

chrubs, wild grass, weeds, debris, rubbish, etc. Excavating up to depth 30 C.M

surface dressing leveling, making slopes for drainage according to landscape,

Disposal of unwanted materials with all labour and tools. Development of lawn

including preparation of bed ground, spreading and mixing the good soil with

1 Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure, Gypsum, 1700 90 S.M.

Fertilizer bas required hand specified. Planting of lawn grass bits roots of

approved quality, watering and specified. Planting of lawn grass bits roots of

approved quality, watering, and specified. Planting of lawn grass watering

mowing, weeding etc.

Catagory :- Selection - I type

Supplying on site plants with following specifications .

Plantation development works include weeding,cleaning, removal of

unwanted materials,preparation of pits,supporting bamboo sticks as per

specifications,planting & stacking, watering,with all labor tools and tackles etc.

2 Plants would be in good condition and of specified height. The rates would be

inclusive of all taxes, sales tax, Octroi,transportaion etc. complete F.O.R. site.

Conditions of plant would be verified at the time of selction as well delivery. All

complete and as per instructions of the Engineer-in-charge as Selection By

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 25' - or more)

(Height from 1.2 m to 2.5m ,Bag Size: 15'' * 15''/ 12'' * 12'' - or more)

(Height from 3m to 4 m, Girth Size: 75mm to 100mm,Bag Size: 25'' * 25' - or more)

Trees - (Height of plants - 8' to 10' & Bag Size of plants - 18" x 18" 50 150 Nos

Shrubs - (Height of plants - 1'6" to 2' & Bag Size of plants - 6" x 8" 1335 15 Nos

Border/ Hedge plants - (Height of plants - 6” to 1’ & Bag Size of plants - 5" x 7" 500 10 Nos

House/Creepers / Water Plants - (Height of plants - 1' to 2' & Bag Size of plants -

Yallow Bamboo Plants - (Height of plants - 3' & Bag Size of plants - 15" x 15" 0 50 Nos

Green Bamboo Plants - (Height of plants - 2' to 3' & Bag Size of plants - 6" x 8" 0 12 Nos

Budh Bamboo Plants - (Height of plants - 3' & Bag Size of plants - 15" x 15" 0 150 Nos

Ixora Dufy - (Height of plants - 2' & Bag Size of plants - 15" x 15" 0 50 Nos

Foxtail / Royal palm/ Big Avenue tree - (Height of plants - 10'-12' & Bag Size of

plants - 21" x 21"

Palms (mixed) - (Height of plants - 4' & Bag Size of plants - 18" x 18" 0 400 Nos

Conocorpus topiary tree plants - (Height of plants -3' to 4' & Bag Size of plants -

Lawn (selection - 1) or Passpallum lawn 0 120 guny bag

Korean Carpet Lawn 0 9 Sq.Ft.

Supplying,stacking and spreading of goodquality organic as well inorganic

manures and fertilizers and necessary soil conditioners ang amendments.

(a) Neem cake 2210 7 Kg.

(b) Castor cake 110 6 Kg.

(d) Vermicompost 1310 4 Kg.

(e) D.A.P.fertilizer 130 29 Kg.

(f) Cow Urine 30 500 Lit.

(f) Gypsum 330 5 Kg.

(h) Carbofuran 3G 40 120 Kg.

(i) Imidacloprid 17.6 SL (Antitermite treatment) 20 2300 Lit.

(j) Organic mix fertilizer 260 8 Kg.

(k) Cocopeat@ 5KG /Sqm, Providing & mixing of cocopeat in specified ratio

having Ph 6.5-7.5. Cocopeat supplied at site should have max moisture content 100 28 Kg.

of 25% by weight, free from foul odour and any other foreign material.

(l)Termite control granules: Chloropyriphos 10% 50 125 kg

(m)Trichoderma culture 220 250 kg

(n)Silicon based spreading agent 10 1200 Lit

(o)Humic acid 50 200 kg

Providing of decorative pots with all labour etc. comp.As Per Architect

Suggesion & Insutructuins & Drawings.

TOP SOIL: Supplying and spreading in position 300 mm thk layer of good

approved red sieved soil mixed with organic fertiliser including levelling,

watering, consolidation by manually or mechanically (which ever convenient

at site) at every 50mm thik layers, cost including of all materials, labour and

other charges required to complete and as directed by the Engineer In charge

filling of good quality garden soil(free from inert material) suitable for healthy

growth of plants, in layers of 20 cm. Th'. Incl. watering, ramming & consolidation

Supplying and stacking of well rotten Farm yard manure (FYM) at site,including

6 royalty and carriage for all leads. (Manure measured in stacks will be reduced 50 350 Cu.mt

by 8% for payment)

Development & Maintainance of Tree and Palms including loosening

soil,regular watering,weeding,regular trimming/training with all labour,removal

of unwanted materials, required fertilizer, tools and tackles etc. for a period of

Development & Maintainance of shrubs and Climber including loosening

soil,regular watering,weeding,regular trimming/training with all labour,removal

of unwanted materials, required fertilizer, tools and tackles etc. for a period of

Development & Maintainance of Creeper, Ground Cover and Lawn including

loosening soil,regular watering,weeding,regular trimming/training with all

labour,removal of unwanted materials, required fertilizer, tools and tackles etc.

for a period of 12 months

Removal of unwanted vegitation, cleaning of site and disposal of the materials

at suggested site

Total amount of Horticulture Work

Total amount of Horticulture Work

Recharging Borewell (including Maintenance up to defect Liability period)

Drilling 300mm Diameter bore in all types of starta up to any Depth including

cost of bentonite powder carting rings etc. complete the drilling shall be done

by mud flushed rotary equipments; bore holes should withstand at least till

period of subsequent

Supplying best Quality of well- sorted " SEVALIA "pea gravel having size 4mm to

6 mm at site (Market rate)

Providing and fitting bail plug having length 0.45mtr. from M.S medium class

pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to the depth of

tube well (size 250 mm diameter & depth more then 150 ft.) by lowering 100 mm

4 1 4000 JOB WORK.

diameter drop line and 32 mm diameter GI air line for each Zone with air

compressor of capacity not less.

Providing & Fixing MS Clamps with threaded of standard make suitable for ERW

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x 10mm thick

suitable for 200mm diameter.

Excavation and getting out for foundation up to a depth of 2.50mt in and all

kinds of soil including leveling and ramming the bottom of trenchs and

foundation pits, shoring, strutting, dewatering if required slush removing filling

the sides up to origin

(b) 1.50 mt to 3.00 mt. Depth 7.92 136.35 C.M

Providing and laying Cement Concrete M-100 grade 1:3:6 (1 cement: 3 coarse

sand : 6 hand brocken stone aggregate 20mm nominal size ) and curing

complete excluding cost of form work in chamber P.C.C(without forms work)

work complete. .( S.O.R.-2015-16

Providing & laying Fly ash Brick masonary having crushing strength not less then

8 70kg/sq.cm. 1:6 (1 cement : 6 fine sand) with scaffolding, watering, curing etc. 1.46 2914.86 CM

complete with all labours and materials.various area as directed by incharge .

Providing 10mm thick Cement Plaster in single coat on brick/concrete walls far

9 interior plastering up to Floor two level and finished even and smooth in cement 4 114.13 S.M

morter 1:3(1 cement 3 sand various area as directed by incharge) .

Providing, fixing M.S Jali frammed work (three piece with handle fitting) on

Opening portion Precast Module Structure for Prevention of Recharge bore well

structure,size including framme, heavy required Angle (40 x 40 x 6mm), flat pati

(25 x 6mm),cuttin

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low Carbon Galvanise)

'V' wire screen pipe of Johnson or approved make ISI including lowering, fixing,

jointing in bore hole as per aquifer depth and pipe assembly given as per site

condition Soil stat

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of approved

Quality (Prince,Suprem,Finolex) with ISI mark including nesessary fittings and

providing as per site sitution and directed by Engineer –in- charge. (

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for down take /

inlet from Bldg./ Structure to Sand filter Chamber, including piping/ plumbing,

fitting, wall clamping, necessary excavation and filling etc. complete as per site

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 3.5 227 Rmt.

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 10 449 Rmt.

Providing, supplying, fixing and installing M 300 Grade. precast size 1.5 dia x

2.35 mt. height ,top 75mm thick in 2 half pieces Sand Filteration chamber (2

layer Type of Precast module )as per Design, Drawing.including necessary

excavation, filling, dr

(a) 1 layer type of Precast module 0 18500 NO

(b) 2 layer Type of Precast module 1 25000 NO

Proving & fixing in position Johnson make and equivalent ... 'V' wire L.C.G

15 screen pipe 1.00 mm size of filter assembly of pair –ID 205 mm & OD 217.50 mm

of 0.5mm slot size and ID 416 mm and OD 428 mm of 1.00mm slot size as per

(a) 1.0 mt. length. 0 7500 SET

(b) 2.0 mt. Length. 1 14000 SET

Borehole Video photography all the fresh new fresh new bores or few selected

16 as desired for better understanding & clarity of work undertaken as directed by 1 4000 JOB

Engineer -in-charge.

Supplying water tankers for constant water supply at tube well Compressor

17 work and cleaning of work site after completion of entire job (testing) inluding 0.5 500 JOB

cleaning of mud etc.Location as directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per standard I.R.C

18 type design of steel plate including painting lettering etc. complete with fixing 1 5006 NO

in C.C 1:4:8 block with necessary excavation.

Soil Investigation Test report from Govt.approved authorised laboratary (Prior

inserting bore Pipe) of each bore shall be submitted by Contractor and soil

19 1 6000 Each Bore

sample of various starta shall be first collected in Polythene bag and than

submitted in transparent

Removal of surplus excavated earth of excavated mud-pits and water

20 harvesting chambers up to the lead of 5.0 km as per the instruction of Engineer 3.6 65 C.M

21 Frame 1 1600 Nos.

Amount of 1 No. Recharging Borewell

Total Amount of 3 Nos. Recharging Borewell

Total Amount of 3 Nos. Recharging Borewell

Irrigation Work

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand & manufacture etc. comp.

1 Pipe shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

15 mm dia 100 166 Rmt

25 mm dia 1000 256 Rmt

40 mm dia 65 372 Rmt

50 mm dia 7 510 Rmt

65 mm dia 70 635 Rmt

Providing and fixing approved quality, UPVC Sch 80 piping confirming to ASTM

F441, for supplies, approved make, including jointing with upvc solvent cement

and ensuring airtight joints, with necessary specials, couplers, unions, elbow,

equal tees, tail piece, adapter (both male and female), reducer (single stage,

double stage and triple stage), end cap, fabricated bend, etc., including all

required trenching, refilling, in layers, ramming & consolidation, removing away

the surplus earth & spoils, dumping it on site or carting away to lead of

meters as directed incl.. complete of the following nominal diameter (NB) size:

Providing & Fixing P.V.C. Stop Valve Tulsi/Finolex make formake for water

supply line at all floor levels incl. fixtures and joints and fixing the same with

adhesive solvent, including cost of all materials.

15 mm dia 1 150 Rmt

25 mm dia 5 225 Rmt

40 mm dia 4 380 Rmt

50 mm dia 1 570 Rmt

65 mm dia 2 855 Rmt

Providing & Fixing abonite ball cock of approved qualities directed etc.comp.

(A) 25 mm. dia.

(B) 50mm dia. 1 136.52 Nos.

5 non return Valve

Providing & Fixing gun metal check or non return full way wheel valve at all

floors levels, etc. complete.

15 mm dia 1 184.98 Nos.

25 mm dia 1 416.47 Nos.

40 mm dia 1 656.86 Nos.

Providing and fixing screw down bib taps of following size.(A) Brass screw down

bib tap polished bright. (i) 15mm dia.

Providing, fixing, jointing and testing, heavy quality brass ball valve with PN1.6

Rating of approved make, including flanges / unions, nuts, bolts, washers, etc.

complete, as approved by the Architect and Engineer-in-charge for water

supply lines of the following nominal bore (NB) size:

Providing, fixing, jointing and testing, heavy quality CI butterfly valve screwed

with PN1.6 Rating rubber gasket, flanges / unions, nuts, bolts, washers, etc.

complete, as approved by the Architect and Engineer-in-charge for water

supply lines of the following nominal bore (NB) size:

Providing, fixing, jointing and testing, heavy quality C.I non return valves or Dual

Plate check valve scewed with PN1.6 rating confirming to IS 778, with screwed

/ flanged ends, of approved make, on water supply lines of the following

nominal bore (NB) size:

Providing & fixing Dripper or Emmiter for irrigation as per directed by engg. and

Architect/Consultant Instruction & Suggestions

11 Rubber Hose pipe

Providing and supplying of 20 mm (3/4") dia Rubber Hose pipe 100 55 Rmt

Providing & Fixing of sprinkler specification Radius: 10' to 20',Flow rate: 3.8 to

31.5 GPM,Recommended pressure range:40 to 100 PSI,Operating pressure

range: 40 to 100 PSI,Precipitation rates: 0.4 in/hr approx.,Nozzle trajectory:

degrees type All Labour Profit Etc. Comp.

13 PUMPING UNIT

Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having[E] For 7.5 HP

phase open well horizontal mono block pump set suitable for 1550 LPM to

LPM @ 13.5 Mtr to 42 Mtr head suitable for 65/75 mm dia delivery pipe[Cat.III]

Supplying & erecting approved make self-priming domestic monoblock water

pump with 1.5 H.P motor, suitable for operation on 230 volts, 50c/s. AC supply

with metallic flange, and M.S. impeller delivery and following discharge

LPM at 32 Mtr head suitable 25 mm dia delivery[Cat.III]

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and

with 4-14A. range, directly operated thermal overload relay in sheet steel

enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected

on P.W. Block with necessary connection. [Cat.III]

Supplying & erecting approved make Timer System Make Electro power

Automatic liquid level controller 6A. with Magnet sensor testing as per

instruction of Engineer in charge on site complete with wiring connection with

existing wires , with copper conductor from pump to upper and lower tank.

Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI

marked suitable for following size.

18 Providing and fixing of Pressure Release Valve 1 14500 Nos

Total Amount of Irrigation Work

Total Amount of Irrigation Work

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the

1 soil and disposal of the surplus excavated soil as directed within a lead of

Meter for following diameter of pipes.

loose or soft soil

for 250 mm dia 0 326.84 R.M

for 300 mm dia 100 391.74 R.M

Excavation for foundation including sorting out and stacking off useful materials

2 and disposing of the excavated stuff up to 50 mt. lead and all lift, watering

( 1 ) up to 1.5 mt. Depth 199 117.26 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

3 20m.m Nominal size)&curing comp. incl. cost of form work in :(a) foundation &

(A) Foundation and plinth 28 3005.76 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

4 agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 50 4146.15 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

5 agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in :

(1) Having c/s area up to 0.08 sq.mt. 23 12632.6 C.M.

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 0 9102.61 C.M.

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

upto G.L./P.L. 38 8174.41 C.M.

( C ) RCC Pardi:

upto GF 0 10831.75 C.M.

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg. 20 mm nominal

size) & curing complete including cost of formwork in wall caps & copping.

Filling in trenches with available excavated earth in layer not exceeding 20 cm

in depth consolidating each deposited layer by ramming & watering

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work including

binding and placing in position etc. comp.

Upto G.L./P.L. 18180 76.21 Kg.

Providing and constructing brick work using fly ash building bricks having

9 crushing strength not less than 35 kg/sqcm. in foundation and plinth in cement

mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 222 4237 C.M.

Uncoursed rubble masonary with hard stone of approved quality in foundations

10 -A and plinth in cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc.

At ground floor 0 2500.01 C.M.

10-B Above plinth level rubble masonry

Uncoursed rubble masonary with hard stone of approved quality in foundations

and plinth in cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc.

Extra over Item 11 for super structure above plinth level upto floor two level

Providing 10mm thick cement plaster in single coat on brick/concrete walls for

11 interior plastering upto floor two level and finished even and smooth in

(i)Cement mortar 1:3 (1-cement:3-sand)

(A) For wall and similar surfaces

At Ground Floor 0 189.79 S.M.

(B) For ceilings & soffits

At Ground Floor 0 214.16 S.M.

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

At Ground Floor 1989 330.88 S.M.

Providing 35 mm wide throating or plaster drip and moulding it to R. C. C. chajja

etc. comp.. For all floor

At Ground Floor 0 41.66 R.M.

14 Pro. smooth plaster patta

At Ground Floor 50 50 R.M.

Providing 20 mm deep finished groove in plaster in line and level etc. Comp.

For all Floor (M.R.)

At Ground Floor 963 50 R.M.

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,

16 algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped

off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield

(A) For wall 1989 82 S.M

Providing and fixing of MS Box Section Steel work welded in built up sections,

framed work including cutting, hoisting, fixing in position and applying a priming

coat of red lead paint (A) in beams & joists channels angles, tees, flats with

17 connection plates or angle cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like. As per attached drawing including

necessary hardware and labour etc.complete & instructed by in EIC &

All Floor 0 126 KG.

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams

18 and joists, channels angles Tees, flats, with connecting plates or angle cleats as 20 9047.86 QTL.

in main and cross beams. Hip and jack rafters, purlins conneted to common

rafters and the like

Providing and fixing G.I. chain link fabric fencing pvc Coated of required width

in mesh size 50x50mm size x 10 guage thick nuts, bolts, washer or G.I. pins,

excluding M.S. angle etc. complete as per relevant IS specification & Directed

by engineer in charge.(TATA orJindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge.

Providing & applying painting twocoats at all floor levels on new steel other

21 metal surface with Epoxy paint, brushing interior to give an even shade incl.

Claning the surface of all dirt, dust & other foreign matter etc. comp.

Ground Floor 0 215 S.M.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

Ground Floor 0 65.31 S.M.

White Washing with lime on wall surface to give an even shade & surface incl.

23 throughly brooming the surface to remove dirt, dust mortar drops & losse scales

of lime wash & other foreign matter Two coats.

(A) walls 1989 12.41 S.M.

(B) Ceiling 0 13.53 S.M.

24 Rubble masonry pointing

Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement :

Sand) 0 89.78 S.M.

(B) Ruled Pointing

Providing and fixing hot dip Concertina Coil of 610 mm. dia made out of

mm. (12SWG) hot dip galvanized ( G.I. coating not less than 200 gm / s.m. )th.

Wire having 80 nos. of spies and 200 nos. of clips made out of stainless steel (AISI

304) 1.5 mm thick. Dia, G.I. Strips 0.5 mm. ht. (G.I coating not less than 120 gm /

s.m. ) weight of one coil should not be less than 15 kg etc. complete, at the top

of compound wall fixed with S.S clips and binding wires wherever necessary

etc. complete. (Note : Stretching lenght of one coil should not be more than

Total amount for Compound Wall

Total amount for Compound Wall

Excavation for foundation includ.sorting out & stacking of useful materials &

1 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil-With Manual Labour

(A) loose or soft soil

( II ) 1.5 To 3.0 MT Depth 59 129.98 C.M.

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the

2 surplus excavated soil as directed within a lead of 50 M. For following diameter 12 326.84 Nos.

of piles. (2) 250 mm Dia

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. incl. cost of form work in :

(A) Foundation and plinth 14 3005.76 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

M25 Design mix concrete as per IS 456:2000 (latest revision) and as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement.:

(A) foundation, footing, base of columns and mass concrete 11 4180.62 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

M25 Design mix concrete as per IS 456:2000 (latest revision) and as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement.:

(1) Having cross sectional area upto

upto G.L./P.L. 2 12587.74 C.M.

(2) Having cross sectional area more than 0.085 and up to 0.12 sq. mt .

upto G.L./P.L. 3.7 11136.62 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 0 9190.79 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

Cement Concrete M25 Expose work as per IS 456:2000 (latest revision) as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement.( B ) Beam: Up to G.L./P.L. and Ground Floor

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0.3 8994.86 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

upto G.L./P.L. 1 8075.85 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 0 6999.09 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

Cement Concrete M25 Expose work as per IS 456:2000 (latest revision) as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement. '( C1 ) RCC Pardi

upto G.L./P.L. 9 7914.244 C.M.

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.

Upto G.L./P.L. 6567 76.21 Kg.

Providing and constructing brick work using fly ash building bricks having

7 crushing strength not less than 35 kg/sqcm. in foundation and plinth in cement

mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 10 4237 C.M.

Filling in trenches with available excavated earth in layer not exceeding 20cm

in depth consolidating each deposited layer by ramming & watering

Filling in foundation and plinth with yellow or selected soil in layer of 20 cm

thickness including watering ramming and consolidationg etc.comp.

Providing & Applying 20mm. Th. Roller plaster on walls or similar surfacesat all

floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1cement:3

sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand)apply thick

cement slurry and apply roller horizontal as well as vartical (two times ) up to

good quality and size of grain in elevation as perdirected by engineer

upto G.L./P.L. 53 324 S.M.

Total amount upto plinth (A)

Total amount upto plinth (A)

(B) WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator, curing, testing

Cement Concrete M25 Expose work as per IS 456:2000 (latest revision) as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement. (A) Columns :

(1) Having cros sectional area upto 0.085 sq. mt

Ground Floor 0 14519.6 C.M.

Terrace Floor 0 14519.6 C.M.

(2) Having cros sectional area more than 0.085 sq. mt and upto 0.12 sq.mt.

Ground Floor 6.5 12513.8 C.M.

Terrace Floor 1 12513.8 C.M.

(3) Having cros sectional area more than 0.12 sq.mt.

Ground Floor 0 10163.67 C.M.

Terrace Floor 0 10163.67 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

Cement Concrete M25 Expose work as per IS 456:2000 (latest revision) as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement.( B ) Beam:

(1) Having cross sectional area up to 0.08 sq. mt.

Ground Floor 0 10717.09 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 13 9453.03 C.M.

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0 7971.98 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

Cement Concrete M25 Expose work as per IS 456:2000 (latest revision) as per

tender specification in all items including cost of form work and rendering but

excluding cost of reinforcement. (C) Slab:

Ground Floor 14 6756.9 C.M.

Providing, mixing, placing, compacting by machine vibrator, curing, testing

M25 Design mix concrete as per IS 456:2000 (latest revision)and as per tender

specification in all items including cost of formwork and rendering but

excluding cost of reinforcement

Ground Floor 1 9419.25 C.M.

Ground Floor 0.5 6913.25 C.M.

Providing & fixing TMT FE 500 Bar reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.

Ground Floor 4980 76.21 Kg

Terrace Floor 180 77.21 Kg

Providing and constructing Expose red brick work using Expose red brick bricks

having crushing strength not less than 75 kg/sqcm. including cutting, curing,

fixing with 10 to 12 mm groov in cement mortar 1:4 (1 cement :4 fine sand) etc.

Ground Floor 20.5 17624 C.M.

Providing & constructing Half brick masonary in Fly Ash bricks having crushing

14 strength not less than 35 kg/sq.cm in c.m 1:4 (1 cement: 4 sand) curing etc

Ground Floor 0 719.57 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating

coat of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 82 189.79 S.M

Terrace Floor 0 217.93 S.M

(B) for ceilings and soffits of stairs

Ground Floor 109 214.6 S.M

Terrace Floor 0 242.74 S.M

Providing & Applying 20mm. Th. Roller plaster on walls or similar surfacesat all

floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1cement:3

sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand)apply thick

cement slurry and apply roller horizontal as well as vartical (two times ) up to

good quality and size of grain in elevation as perdirected by engineer

All Floor 11 324 S.M

Providing 35 mm wide throating or plaster drip and moulding it to R. C. C. chajja

etc. comp.. For all floor Market Rate.

Providing and applying 20mm. thick cement plaster patta of c.m. 1:3 ( 1cement

: 3 sand ) etc. comp.

All Floors 40 50 R.M

19 Providing 20 mm deep finished groove in plaster in line and level etc. Comp.

All Floor 100 50 R.M

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime

putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing and polishing etc.

All Floor 0 989.45 S.M

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement

: 3 coarse sand) and jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete.

All Floor 0 1076.94 S.M

Providing & laying granite slab 18mm thick in flooring, treads of steps and

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse

sand) or lime mortar 1:1.5 laid and finished with flush pointing in white or colour

cement including rubbing and polishing complete. (Basic Rate:- Rs.1614.0/S.M.)

Ground Floor 29 2410 S.M.

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and

pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1614.0/S.M.)

All Floor 3 2449 S.M.

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid

on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary

adhesive material and finished with flush pointing in white or colour cement,

including rubbing & polishing comp.. (Basic Rate:- Rs.1200.0/S.M.)

All Floor 7 2026 S.M.

(A) Labour Charges For Half Round Edge For Granite 0 85 S.M.

(B) Labour Charges For Quater Round Edge For Granite 0 51 S.M.

(C ) Labour Charges For Edge Finished For Granite 55 43.43 S.M.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

25 existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Ground Floor 22 1383.99 S.M

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of

26 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement :

coarse sand) finishing with flush pointing in white cement.

All Floor 90 1040.35 S.M

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter

with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frmae is to be filed up with injected polyurethene foam done in situ along with

27 embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings. Product should have 3 years

performance guarantee and company have ISO 9001-2000 certificate.

Ground Floor 0 2019.98 S.M

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water

proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of finished size 12cm

x 7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

Providing and fixing window having extruded aluminium Powder Coated

section frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605,

@ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm x 31.75 mm x

mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size

mm x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with

sliding shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal

section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. complete for window. (A) Same as

above but Colour anodized

All Floor 8 2140.33 S.M

Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

All Floor 0 2414 S.M

Providing and fixing M.S. grills of required pattern to wooden frames of windows

31 etc. with M.S. flats at required spacings and frame alround, square or round 200 104.2 Kg.

bars with round headed bolts and nuts or by screws (A) Plain Grill.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

(A) For plain grill For all Floor 29 65.31 SM

Apply two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of

approved brand and manufacture on new wall surface to give an even shade

including thoroughly brushing thr surface free from mortar dropping and other

matter and sand papered smooth.

(A) for wall and similar surfaces 82 79.39 S.M

(B) for ceilings and soffits 109 79.39 S.M

Wall painting with two coats of acrylic emulsion plastic paint of approved

34 brand over existing surface to give an even shade & surface free from mortar

dropping & other foreign matter & sand papered smooth etc. comp.

(A) for wall and similar surfaces 82 78.6 S.M

(B) for ceilings and soffits 109 83.96 S.M

Providing & applying two coats of weather shield max paint (3 coats may be

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped

off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield

MS Box Section Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common

raffers & the like. including necessary hardware and labour etc.complete &

instructed by in EIC & Architect.

Providing and fixing Staainless steel (Garde 304) railling made of Hollow

Tubes,Channels, plates Polising and making curvature (Whereever Required)

and fitting the same with necessary stainess steel Bolts etc. of required size, on

the top of the floor or the side of waist slab with suitable arrangement as per

approval of EIC. ( For payment perpose only weight of stainless steel member

shall be consider excluding fixing accessories such as nuts, bolts, fastners etc.

Total amount of Ground floor (B)

Total amount of Ground floor (B)

(C) WATER SUPPLY AND SANITARY ITEMS

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm

diameter with jali of the following nominal diameter of self cleaning design with

C.I. scread down or hinged grating including the cost of cutting and making

good the walls.

All floor 2 558.36 No

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber

& water tight C.I. cover with frame of 300mmx300mm size (inside) with weight

includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 100mm x 100mm Size -P type

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm

& 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in C.M

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

40 R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 2 2904.47 No

20mm size) ,Foundation concrete 1:5:10 & fixing Precast RCC heavy duty cover

on top etc. comp. for single pipe.(A) Same as above but precast RCC heavy

duty cover instead of C.I cover

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5

with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

41 20mm size) ,Foundation concrete 1:5:10 & fixing Precast RCC heavy duty cover 2 2681.76 No

On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for single

pipe (A) Same as above but precast RCC heavy duty cover instead of C.I

Providing laying (to level or slopes) and jointing reinforced concrete Light duty

42 non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

(B) 110mm. dia. 20 325 R.M

44 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc.

All floors level 4 101.91 No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I or

45 PVC pipes including the cost of cutting holes & making good the wall etc.

Complete - 100 mm. dia. (M.R.)(RA- )

(A) 40 TO 50 mm Dia. 0 62 No

(B) 75 TO 90 mm Dia. 0 75 No

(C) 110 mm Dia. 20 90 No

NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2)

The rate shall include for work at all floors & conducting water proof test as

directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be

down in order and as directed and specified by the engineer-in-charge. With 62.03 511 S.M.

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

Total amount of Plumbing & Sanitation ( C )

Total amount of Plumbing & Sanitation ( C )

Internal Electrification of Entrance Gate (D)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected Open/ concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/

ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories - Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected Open/ concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories Cat.III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on surface of wall / ceiling

complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories. (a) with medium class Rigid

PVC pipe and accessories

3 [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire Cat. III 0 444.23 Pt

4 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Cat. III 0 668.48 Pt

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base frame covered with textured /

metallic front plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

6 (a) 2 wire 1.5 sq. mm 20 59.59 Mtr.

7 (b) 2 wire 2.5 sq. mm 15 78.78 Mtr.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

7B metallic/white front plate , modules erected with necessary connections as per 2 24.24 Each

site situation directed by Engineer In charge.

(7) Blank Plate Single Cat. III

B LT Switchgear, Distribution Boards & LT Panel

Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C.

8 system and having breaking capacity 10 KA to be erected in existing box. 2 111.27 Ea.

confirming to IS 8828/1996 with ISI Mark Cat. III

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system

8A and having breaking capacity 10 KA to be erected in existing box. confirming 0 270.68 Ea.

to IS 8828/1996 with ISI Mark (for each fitting)

Providing & erecting 240 V MCB double pole switch for motor & inductive load

9 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity

(B) 40 Amp. Cat.III 1 329.53 Ea.

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company of MCB to be used)

10 (D) Single phase 6way SS Double door 1 885.77 Ea.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation

11 on 3 phase and neutral 415V. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(i) 25 Amps.DP Cat III. 1 1968.64 Ea.

Providing& fixing G.P. L-Slotted Angle (3" Gap, 16 Gauge ) and M.S L-Type Patti

Bracket With PVC Coated (8mm) Nut-Bolts (with 2 wiser) and 3" Khila on wall at

12 Levels of approved design including the cost of cutting, drilling holes & make 0 213 R. Mtr

good the wall etc coplete-For Meter Fitting Arrangement of Single/Three Phase

Meterbox (with MCB) as per site requriment.

C Indoor Lighting & Fan Item.

SITC of IP65 Surface / suspension mounted waterproof luminaire, Polycarbonate

housing and linear prismatic ribbed cover providing excellent distribution of

light, Convenient Polycarbonate fastening clips and hinged diffuser to make it

easy to replace lamps, Press fit CRCA gear for ease of maintenance. complete

with tube holders, lead wire and connections. with wall/Ceiling Mounting

Clamp. (Min Two Clamp for tube Luminary) and with 1 LED Tube 2100 Lumen

Make : , Crompton, Philips,Havells,Bajaj (To be used for ceiling

Mounting). Contractor Has to

submit NABL approved Laboratory Test certificate of model to be offered for

confirmation of above specification.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

13B protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

(ii) 5 to 8 watts

Fans & Related Item

Providing and erecting Approved make Power Saving / High Speed Max.

Watt Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete having 3 blades with aluminium blades with 2 1947.25 Ea.

canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 ,

core flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Supplying & erecting single phase approved make industrial exhaust fan

suitable for medium duty ring mounted low noise operation suitable for medium

duty having following dia size and maximum speed in RPM [A] 305 mm dia

380 mm dia and 1400 RPM. Cat.II 2 3081.36 Ea.

450 mm dia and 1400 RPM. Cat.II 0 3937.29 Ea.

D Earthing System

14 Providing and erecting HOT deep Galvanized iron strip wire 8 to 16 SWG. 2 77.03 Kgs

Supplying and erecting eartn pit of minimum bore dia. 150 mm. size, approved

make Safe Earthing Electrode, consisting of pipe-in-pipe trechnology as per IS

3043-1987, made of corrosion free g. i. pipes, having outer dia. of 50 mm.,

having 80-200 micron galvanizing, inner pipe dia. of 25 mm., having 200-250

15 micron galvanizing, connection terminal dia. of 12 mm., with constant ohmic 1 8634.64 Ea

value, surrounded by highly conductive compound with high charge

dissipation, suitable for the following type of applications.

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Total amount of Internal Electrification ( D )

Total amount of Internal Electrification ( D )

Total amount for Entrance Gate

Total amount for Entrance Gate

Excavation for foundation includ.sorting out & stacking of useful materials &

1 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil With Machinaries

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 98 117.26 CM

( II ) 1.5 To 3.0 MT Depth 30 129.98 CM

(III) 3.0 To 5.0 MT Depth 2 142.52 CM

Excavation for foundation includ.sorting out & stacking of useful materials &

2 disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil-With Manual Labour

(A) loose or soft soil

( I ) 0 To 1.5 mt. Depth 5 203.83 CM

( II ) 1.5 To 3.0 MT Depth 5 224.95 CM

(III) 3.0 To 5.0 MT Depth 2 246.06 CM

Providing Dry Rubble Soilling of various thicknessto required grade including

3 trimming of earth work hand packing the interstics with Quarry Spalls complete

for all leads and lifts.

(A) Foundation and plinth - MR 44 1054.26 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. incl. cost of form work in :

(A) Foundation and Plinth 25 3005.76 CM

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

5 agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in :

(A) foundation, footing, base of columns and mass concrete 41 4146.15 CM

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

6 agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in :

(1) Having cross sectional area upto

upto G.L./P.L. 1.5 12632.6 CM

(2) Having cross sectional area more than 0.08 and up to 0.12 sq. mt .

upto G.L./P.L. 0 11166.97 CM

(3) Having cross sectional area more than 0.12 sq. mt.

upto G.L./P.L. 4 9201.68 CM

(1) Having cross sectional area upto 0.08 sm.

upto G.L./P.L. 0 9102.61 C.M.

(2) Having cross sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

upto G.L./P.L. 0 8174.41 CM

(3) Having cross sectional area more than 0.12 sq.mt.

upto G.L./P.L. 12 7086.88 CM

Providing and fixing TMT FE-500 bar reinforcement for R.C.C. work including

binding and placing in position etc. comp.

Upto G.L./P.L. 7410 76.21 Kg.

Providing and constructing brick work using fly ash building bricks having

8 crushing strength not less than 35 kg/sqcm. in foundation and plinth in cement

mortar 1:6 (1 cement :6 fine sand) etc. comp.

upto G.L./P.L. 20 4237 CM

Filling in trenches with available excavated soil incl. Watering and

9 consolidating etc. comp inclu. Spreading the available soil as per instruction of 81 130.39 CM

engineer in charge etc.complete.

Filling in foundation and plinth with yellow or selected soil in layer of 20 cm

thickness including watering ramming and consolidationg etc.comp.

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

upto G.L./P.L. 0 330.88 SM

Providing & applyin Decorative natural stone texture Coat Synthetic plaster

consisting of crushed natural stone chips of 0.5 to 4 mm size in proper gradation,

bonded with Synthetic Resins, Adhesives and various additives and applied two

coats of 3 of 2.5 mm approximately.

The basic Adhesive is an Aqueous Vinyl Acetate / Acryl ate Co-Polymer

Emulsion. The Acryl ate component polymerized into the product, imparts

goods flexibility to the coating. The Co-Polymer emulsion is combined with other

Chemical Compound to give specific properties to the final coating. These

chemicals are designed to give fungus and bacterial resistance property while

in the drum, as well as to apply Coating. They also give good application flow

properties and cohesive finish, thereby enabling the adhesive to penetrate into

the substrate before drying and form anchor like grip. The Additives also

reinforce coating, impart water resistance and increase the life of the coating.

The specification demands that to maintain consistent quality, the material is

supplied in ready-mixed paste, packed in airtight drums. In packed drums, the

shelf life of the material will be at least one year, if stored in cool dry place

Providing and applying of Resin Bonded. Ready Mixed Ready to Use Decorative

natural stone Textured Coating of approved shade and color. Dry film of the

average thickness of 3 mm of 5 mm on recommended plaster specification; to

perfect line, level, plump including finishing with sharp edge at corners, niches

etc. all as per manufacturers recommendations and specification including all

labor materials, scaffolding and surface preparation etc. Complete as

specified in drawing and as directed by the Engineer-in-charge.

All Floor (as per approved rates for Art Centre)

upto G.L./P.L. 134 968.4 SMT.

Supply, Laying and washing of Hydrophobic type Factory premixed Free Foam

Stonecrete wall texture, 8 t0 10mm thick in approved base colour and with

selected and approved aggregates by EIC - Including specified UV resistant WB

AcrySeal application.

Providing and Fixing of Sitting Making of controlled cement concrete work

14 M250 Expose with Groove and curing complete including the cost of form work 0 6484 CMT

but excluding the cost of reinforcement of reinforced concrete work.

Providing & laying River Wash Black granite slab 18mm thick in flooring, treads

of steps and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

15 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete. (Basic Rate:-

Rs.1614.0/S.M.) For River Wash add 100 rs (=2422+100 = 2522)

Ground Floor 108 2522 S.M.

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and

pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

16 finished with flush pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1614.0/S.M.) For River Wash add 100 rs

All Floor 63 2549 S.M.

17 (C ) Labour Charges For Edge Finished For Granite 290 70 RMT.

Providing and fixing of 100% Valsadi Saag wood Wooden

Floor,dedo,pargolla,seating back support using of 100% Valsadi Saag wood

Wooden Section as per architect Suggesion & Drawings for floor all Wooden

Section Finish with Sealer Coat Wood Polise as per Architect Design , drawing

including Scaffolding, necessary hardware,cutting, hoisting, fixing in position

and labour etc.complete & instructed by in EIC & Architect.

MS Box Section Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins connected to common

raffers & the like. As per attached drawing including necessary hardware and

labour etc.complete & instructed by in EIC & Architect.

Providing & applying painting two coats at all floor levels on new steel other

20 metal surface with Epoxy paint, brushing interior to give an even shade incl.

cleaning the surface of all dirt, dust & other foreign matter etc. Comp.

(A) For All Type of Steucture For all Floor 0 215 SM

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

Ground Floor 27 65.31 S.M.

Providing, supplying & placing precast RCC Woodeny benches as per given

specifications. (Seating plank dimensions : Seating Length of the Bench :

mm, Seating width of the Bench : 450 mm, Seating height of the Bench :

mm, Seating plank thickness : 60 mm,Total height of the Bench : 900 mm.)

M-30 grade of Concrete using vibration compaction process. Benches consists

of 2 Nos. L-shape base support in wooden texture and 1 Nos.flate back and

Nos. bottom plank leg thickness :90 mm, Leg hight : 830mm, Leg width : 600 mm,

backside plank width : 350 mm, backside plank length : 1380 mm, backside

plank thickness : 60 mm.

Bench top and back planks are treated with special anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make surfaces glossy

and water proof.

The back rest should show as details given by SMC in embossed at casting time. 1 3927 NO.

Total amount of Seating Area

Total amount of Seating Area

External Electrification

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset resin

polyester/epoxy resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as well as non conductive

and shock proof. Pole should be provided

with FRP/GRP base bracket dully fabricated from metal(M.S) and dully claded

with FRP/GRP material to avoid any metal exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity (ASTM D 792) 1.3‐1.8

Kg/m3, 2. Glass Content % by weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water

absorption (ASTM D 570)

<0.5%, 4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength (ASTM D

790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695) 200+/‐50MPa, 7. Yeild

Strength(ASTM D638) 250 +/‐50MPa.

Pole should be flame retardant as per IS 6746.Resin used shall be UV resistance

and pigmented. Pole should be painted with first coat of epoxy primer and

then two coat of highly

weather resistance polyurethen paint to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to 100 micron.Defelection of the pole shall

not exceed more than

10.0 % of the length of the pole for the given load.Pole should be generally

made as per the dimensional data,performance criteria and some

interchagebility features of poles

as per the standard ANSI C123.20 latest version of ASTM D 923/01 including

cable termination box with necessory accessories.The size of pole and type of

installation with

foundation , Anchor Base & Internal junction box as per the manufacturer

details and site requirement .

(1) 'A' class frp/grp pole suitable for base plate mounting

[C] Overall Length of 5.0 meter, Average thickness : 5mm, Top/Bottom Outside

Dia. 76/160mm +/‐2.Weight of Pole 17.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 310 Ø * 12mmthk , Mounting hole PCD

260mm * 4 nos. of 16 Ø hole)

[D]Overall Length of 6.0 meter, Average thickness : 5mm, Top/Bottom Outside

Dia. 76/176mm +/‐2.Weight of Pole 19.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 340 Ø * 12mmthk , Mounting hole PCD

285mm * 6 nos. of 20 Ø hole)

Providing FRP/GRP arm bracket of having 15˚ arm with 50 mm OD pipe *5 mm

thk,1000mm long from pole centre

(A) Single arm bracket 0 1900.82 Nos.

(B) Double arm bracket 0 2413.9 Nos.

Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware

for fixing the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top

(A) Single arm bracket 0

(B) Double arm bracket 0

(C) Triple arm bracket 0

Supplying and erecting Street light pole bracket comprising main B Class GI

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the brackets and having spread of

mtr. Length with 110 deg.with vertical plane and suitable welded stiffener

reducer and nipple with check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.

[A] Single Arm bracket 0.5 Mtr 25 491.87 Nos.

[B] Double Arm Bracket 0.5 Mtr 9 622.16 Nos.

[C] Three Arm Bracket 0.5 Mtr 0 743.36 Nos.

[D] Four Arm Bracket 0.5 Mtr 0 889.81 Nos.

Providing & Constructing M-150/ 1:2:4 CC foundation including excavation upto

6 Meter Pole ( Foundation size :- 450 X 450 X 1000 )

(a) for up to 6 m Long pole as above 34 944 Nos.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

4 for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.

(d) 2 to 4 core 10 Sq. mm 69 38.38 Nos.

(e) 2 to 4 core 16 Sq. mm 0 47.47 Nos.

(f) 2 to 4 core 25 Sq. mm 0 51.51 Nos.

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

10 Sq. mm 0 13.13 Nos.

SETC of following size 1.1 kV grade XLPE insulated Aluminium conductor

6 armoured cable as per detailed specifications, terms & conditions of the

(c) 4 core 10 Sq. mm 700 138.37 Mtr

(d) 4 core 16 Sq. mm 5 151.5 Mtr

(e) 4 core 25 Sq. mm 5 188.87 Mtr

(e) 4 core 35 Sq. mm 5 253.51 Mtr

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

7 of same material at required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to make ground as per

(A)50 mm dia 530 62.62 Mtr

(B)90 mm dia 0 95.95 Mtr

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

8 locating the fault all over the run and backfilling the same and making the

surface as normal ground.

(a) Soft soil/ Kachcha Road 530 46.46 Mtr

(b) Hard Murrum/ Asphalt Road 0 62.62 Mtr

SETC of PVC/ XLPE insulated ISI marked unarmoured copper cable 1.1 kV grade

9 of following sizes & as per detailed specifications, terms & conditions of the

(h) 2.50 Sq.mm 3 core round PVC sheathed 233 73.73 Mtr

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company

10A mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED

used for luminaire. ( Each type fittings required LM-79 & LM-80 certificates)

(a) 10 to 12 Watts Cat-lll 0 1195.84 Nos.

(b) 15 to 24 Watts Cat-lll 0 1823.05 Nos.

( c ) Above 24 watts to 36 watts Cat-lll 43 2201.8 Nos.

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

10B with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. 0 3345.12 Nos.

(i) above 36 to 48 watts

(ii) above 48 to 60 Watts 0 4997.48 Nos.

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and

10C spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP

(ii)32-40W Cat-lll 0 4819.72 Nos.

Painting the number and words on streetlight pole and back ground of colour

as per Zone Code as per detailed specifications, terms & conditions of the

tender (Up to 20 characters, Up to 50 mm Height. & (iii) add for additional each

Pipe type Earthing having 150 cms long and 2.5 cms. Dia galvanised iron pipe

12 with coupling and buch buried in specially prepared earth pit complete with 34 368.65 Nos.

necessary 8 SWG earth wire.

for using salt and charcoal / coke as required for pipe type earthing. 34 171.7 Nos.

Supply and laying of GI "B" grade pipe having following dia. meter for cable

guard as per detailed specifications, terms & conditions of the tender: -

(d) 50 mm dia. 0 326.23 Mtr

Miniature circuit breaker single pole 0.5 A to 2A suitable to operate on 240 V

A.C. system and having overload and short circuit tripping elements and

14 breaking capacity 10 KA to be erected in existing M.S. box confirming to IS 43 270.68 Nos.

8828/1996 with ISI mark. (For each Fitting)

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C.

system and having overload and short circuit tripping elements and breaking

capacity 10 KA to be erected in existing M.S. box confirming to IS 8828/1996 0 299.97 Nos.

15 SITC of 6 KW capacity One Phase GI Feeder Pillar 1 51300 Nos.

SITC of 10 KW Three Phase capacity CCMS 0 62900 Nos.

16 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 2 77.77 Kg.

Supplying and erecting eartn pit of minimum bore dia. 150 mm. size, approved

make Safe Earthing Electrode, consisting of pipe-in-pipe trechnology as per IS

3043-1987, made of corrosion free g. i. pipes, having outer dia. of 50 mm.,

having 80-200 micron galvanizing, inner pipe dia. of 25 mm., having 200-250

micron galvanizing, connection terminal dia. of 12 mm., with constant ohmic

value, surrounded by highly conductive compound with high charge

dissipation, suitable for the following type of applications. Length of pipe :

mts. Backfilling compound : 02 nos. bags of 25 Kgs.

Construction of man holes as per following specifications for providing passages

to lay the cables.

Providing 600 mm(B) x 600 mm(W) X 750 mm(D) manhole complete with 6" thick

brick wall, plastering on both sides and providing C.I. hinged cover complete in

(c) LED Bollard fittings of minimum height 1000 mm & dia.100mm having

polycarbonate clear/milky diffuser mounted on 3mm thick aluminium finished

19 powder coated pipe with base plate 160x160mm with erection by M8x75mm 0 4461.17 Nos.

fastner with required RCC foundation.IP65 for 9 to 20 watt and above ,surge-4kv

Supplying & erecting approved make press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete with bakelite connector strip 5way

(3P+N+E) & hinged doors having locking arrangements with mounting clamp

with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(b) 250mm x 200mm x 100mm [deep]

8W LED surface Mounted Spike light to be mounted on the foundation, 3000K,

IP65 , CRI>80, CREE LED, ulham/Meanwell etc. complete.

(Make : Crompton, Philips, Osaram, Havells or equivalent)

Path Finder Light 3000K with Initial input power

1 W, Input Voltage 12 V,Luminous flux tolerance +/-10%, 3000 K, IK10 [ 20 J

vandal-resistant],IP67 [ Dust penetration-protected, watertight] suitabe for

grounting on the concrete walkway

(Make : Crompton, Philips, Osaram, Havells or equivalent)

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(G) Step Light having Aluminium die cast and ABS Plastic material. 5 573.68 No.

(i) 5 watts, Direct/Indirect luminaire, Cat-lll

(D) LED Strip Light 45 220.18 R.Mt.

(ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable

Driver complete

(E) Under Water Light,12V DC including Driver,IP-67 with die-cast/deep drawn

housing with impact resistance clear toughened glass.

Supply, Erection, Testing & Commissioning of 10 watt LED Bulk Head luminary,

having min. 600 lumen out put, with housing made of high pressure die cast

aluminum & Poly carbonate front diffuser, IP66 protected & having impact

24 resistance of IK09. 0 1383.185 No.

Make: Havells, Bajaj, Crompton, Philips,GE Contractor

Has to submit NABL approved Laboratory LM 79 and LM 80 Test certificate of

model to be offered for confirmation of above specification.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(F) Spot Light 425 Lumens, Surge-2KV

(For Wall Mural)

(ii) 8 to 11 Watts Cat-lll

(I) Adjustable spot light with COB led having aluminium reflector of following

(ii) 12 Watts 0 966.57 No.

SETC of LED Wall/Pole mounted outdoor type up lighter/ Up-down Lighter/

Down Lighter as per requirement of Site and as per selection, any light fixture,

Model as per selection from Consultant & client

Lumen Package : 1000-1500 Lumen

Surge Protection : Minimum 2KV

Each fitting required : LM-79 & LM-80 Certificates NABL approved company’s or

26 third party’s laboratory) 2 7129.59 No.

Voltage: 120 to 300 V,

Power Factor more than: 0.9,

CCT: 2500 to 6500K

LED driver efficiency: > 85 %

Protection Class: IP

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be comprising

27 of hermetically sealed compressor, fan motor, condensing unit, water tank 1 46648.87 Each

surrounded by evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system

with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity & erected as directed [C] 50 Ltr /

Hr with 150 psi 2 nos booster pump

Total External Electrification Work

Activity Area Equipments & Signages

Providing & Fixing Of Two Nos Dry aad Wet S.S Decorative type one DUSTBIN of

20 ltrs. With S.S.Support

2 Supply and fixing of CHILDREN PLAYING EQUIPMENTS.

COMBINATION SET 3 IN 1 As the name suggests, this item has a combination of

three items such as swing, slide and seesaw. The complete frame of this item is

fabricated from 20 NB and 25 NB powder coated GI pipes. The slide in the

combination set is made up of Fiber reinforced plastic (FRP). The slide landing

support is made in 20 NB pipe. The slides are given a smooth finish so that the

2.1 child does not hurt itself while playing on it. The bucket swing is made up of 2 54591 No

LLDPE and is attached to a nylon rope. For the bucket swing a handle is given

for gripping, which is made in rotational molding and out of LLDPE. The see-saw

lever and stand is made up of 20 NB GI pipe. The see saw seat is made out of

LLDPE. The bearing used is of heavy-duty bush type.(Age Group :- 2-

yrs.,Product Area :- 2.0 m x 1.6 m,Safe Play Area :- 3.0 m x 2.6 m,Height :- 2.40m.

SPRING RIDER DUCK: The spring rider being a duck rider provides an unlimited

fun to the children riding on it. The duck is made out from fiber reinforced

plastic (FRP). The handles of duck provided for gripping is made up of 15 NB GI

pipes, whereas the duck is made out of LLDPE in rotational molding. The duck is

mounted on heavy-duty compression spring. Also a GI flat is provided for

footrest. The spring is mounted on 5mm thick plate. And the stand for support is

made out of 40 NB pipe.(Age Group :- 3 - 6 yrs.,Product Area :- 1.0 m. x

m,Safe Play Area :- 2.0 m. x 1.5 m,Height :- 2.00m.)

DOLPHIN SEE-SAW:This innovative spring see saw is an exciting product, which

provides unlimited fun to the children playing on it. The dolphin is made up of

PP sheet of 12mm thick. The seating arrangement is also made up of FRP sheet

of 3mm thk. The handles for gripping are made up of S.S material. The frame is

made from 25 x 50 x 1.6 mm thk rectangular tube. Rubber padding is fixed at

the bottom end of the tube to absorb the ground impact. The dolphins are

mounted on a pair of heavy-duty compression spring. The dia of the spring rod

is 20mm. The spring is mounted on 5mm thick plate. And the stand for support is

made out of 50MM NB powder coated GI pipes. For a good foundation, M.S.

angle of size 25 x 25 x 5 mm thk are provided. Special end caps are used to

cover the nuts bolts so that no injury is caused to the child. (Age Group :- 3-8

yrs.,Product Area :- 0.4m x 0.75 m,Safe Play area :- 1.40 m x 2.0 ,Height :- 0.60m.)

2.4 Toddler Swing 1 56682 No

2.5 Mini Slide 1 52640 No

FOUR-SEATER ARC SWING- As the name suggests, four children can enjoy the

four seater arc swing at one time. The arched shaped side frame is made of

NB GI pipes and top pipe is made up of 50 NB GI pipes. The frame is powder

coated to give an esthetic look. The four swings are made up of 10 mm thick

anti skid chequered reinforced rubber top. The rubber belt seat is suspended on

6 mm rubber coated GI chain. The ball bearings are mounted inside a specially

designed nylon clamp.(Age Group :- 4-14 yrs.,Product Area :- 6.5 m x 1.5 m,Safe

play area :- 7.5 m x 2.5 m,Height :- 2.40m)

MULTI LANE SLIDE - 2 LANES - As the name suggests, 2 riders can slide at one

time on 2 lanes - multilane slide. The slide chute is made from 3-4 mm thick Fiber

Reinforced Plastic (FRP). The sides are smooth and curve is given to provide

smooth ride to the riders. The platform is made from Fiber Reinforced Plastic

(FRP) with suitable wooden reinforcement. The trapezium platform is supported

by 80 NB powder coated GI pipe. The railing is provided to the platform and is

made from low-density polyethylene (LLDPE), supported by 20 NB GI pipe. The

ladder is made up of 40 NB GI pipe and having railing of 25 NB. The steps are

made up of 16 SWG GI sheet folded in triangular shape with smooth edges. The

slide is supported with 'T' supports, made up of 80 NB GI pipe. The slide entry

railing is made in 20 NB GI pipe.(Rec. Age :- 4-12 years,The area :- 7.80 m

x 2.20 m,Safe play area :- 8.80 m x 3.20 m , Platform Height :- 2.15 m )

MULTIACTIVITY PLAY SYSTEM -05: - Age Group : 5 to12,Area : 10 x 9.5m,Safe Area :

12m x 11.5m,Height : 1.52m. Sq. Deck 5’ ht with canopy:The platform is made

up of FRP with anti skid surface. The top canopy is made of FRP with a minimum

thickness of 2-3 mm. The canopy is assembled from four modules.

Bowl Slide 3’ ht:The Bowl slide sliding part is made up of Fiber glass Reinforced

Plastic molded one and is of attractive color and shade. The FRP bowl slide has

minimum permissible joints suitable for children such that child does not fall

2.8 down while sliding down. The thickness of the slide is 3 -4 mm thk. There is a

suitable handgrip on the side of the slide. The landing support is made up of

FRP Bridge 8’ Long:The FRP Bridge is made from FRP with a thickness of 4mm.

The ladder should has strength and avoids bending. The ladder should be such

that it does not have any kind of skiddy movement.

FRP Tunnel 6’ Long:FRP Tunnel is a pipe shaped module of specific dia made

from FRP of 4mm thickness.

Swinging Bridge 8’ Long:The swinging bridge is made up of wooden planks

attached together with the help of nuts bolts and is suspended with galvanized

chains of 12mm thk. The railing is made from roto molding process with pipe

support of 20 NB GI pipe. The frame is made up of 80 NB pipe & has a 50 x10 MS

flat welded at the ground level.

Spiral Slide 5’ ht :The spiral slide chute is made of FRP having shell thickness of 5-

6 mm. The center support of the spiral slide is made from 100 NB GI pipe. The

supports for landing are made up of 20 NB GI pipe. The railing is made up of

LLDPE in roto molding process. It is supported by 20 NB GI pipes. The support

pipe is powder coated to avoid rusting of the pipe.

FRP Ladder:FRP ladder is made up of FRP with a conservative thickness of 4 mm.

The ladder has reinforcement to maintain strength and avoid bending. The top

surface of the ladder should be such that it should not deserve any kind of

skiddy movement.

Rock Climber 5’ ht:The Rock climber is made up of FRP (FRP). The rocks are

moulded on same platform. The climber is supported by 25 NB pipe at the

bottom for ground support.

Wave Slide 5’ ht:The Wave slide Chute with top entry module is made up of

mm thick of FRP. The Wave shape should be in such a manner that it will not

give any jerk or

bump to the rider. The chute has its end such as it causes safe landing of the

child. The landing portion should be in horizontal with respect to the ground.

There should be support provided made up of 25 NB GI pipe.

The chain climber is made from 7mm thick galvanized chain. The foundation

frame is made from 25 NB GI pipe with ‘U’ hooks welded to it. The chain is over-

hanged with a M.S. flat 50 x 10 with the help of ‘U’ hooks. The steps are made

from 20 NB GI pipes welded to the chain for climbing.

The bubble panel is provided for all decks for safety purpose and it is made up

of LLDPE in rotomould process. It is supported by 20 NB GI pipes clamped to the

vertical support pipe. The support pipe is powder coated to avoid rusting of the

FRP Staircase 3’ht: 0 445500 No

The staircase is made up of FRP with a conservative thickness of 4 mm. The

ladder should have reinforcement to maintain strength and avoid bending. The

top surface of the ladder should be such that it should not deserve any kind of

skiddy movement.

The cross n zero enhances the tactical strength ability of the children. The prisms

of ‘X’ and ‘O’ are made out of molded plastic while the frame is made out

from LLDPE in molding process. The prisms are fixed on powder coated GI pipe

frame of 15 NB.

2.9 S Loop Climber 1 44137 No

Providing and fixing of M.S.powder Coated Open GYM Equipment Design & All

Section As per Architect/Consultant Drawings,Instruction & Suggesion

CHEST PRESS DOUBLE: MADE OF 114MM ROUND PIPE AND

41MM ROUND PIPE GI JINDAL BRAND 3.5 MM WALL

THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

3.1 POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE 1 61560 NO.

RUST PROOF ALL HARDWARE CAPPED PROTECT FROM THE

RUST UPPER AND LOVER CAPPED.

SHOULDER PRESS DOUBLE: MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.2 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 60398 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

LEG PRESS DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE GI

JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.3 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 49945 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

CHEST PRESS WITH PULL CHAIR : MADE OF 114MM ROUND PIPE AND 41MM

ROUND PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL

3.4 BEARING AT MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED 1 60398 NO.

STUCTURE RUST PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER

AND LOVER CAPPED.

CROSS WALKER DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE

GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.5 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 62721 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

ELIPTICAL CROSS TRAINER : MADE OF 88MM ROUND PIPE AND 41MM ROUND PIPE

GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.6 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 66206 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

ARMS WHEELS DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE

GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.7 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 36007 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

AIR WALKER: MADE OF 88MM ROUND PIPE AND 41MM ROUND PIPE GI JINDAL

BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST PROOF ALL

HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

SITTING STANDING TWISTER : MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.9 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 37517 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

TRIPPLE TWISTER : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE GI

JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.1 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 40653 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

BONY RIDER MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE GI JINDAL

BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST PROOF ALL

HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

ROWING MACHINE : MADE OF 88MM ROUND PIPE AND 41MM ROUND PIPE GI

JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.12 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 44137 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

BICYCLE : MADE OF 58MM ROUND PIPE AND 41MM ROUND PIPE GI JINDAL

BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST PROOF ALL

HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

SHOULDER WHEELS DOUBLE : MADE OF 114MM ROUND PIPE AND 41MM ROUND

PIPE GI JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.14 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 43324 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

BACK MASSAGER : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE GI

JINDAL BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT

3.15 MOVEMENT POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST 1 55752 NO.

PROOF ALL HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER

LEG STRETCH : MADE OF 114MM ROUND PIPE AND 41MM ROUND PIPE GI JINDAL

BRAND 3.5 MM WALL THICKNESS, SKF BRANDED BALL BEARING AT MOVEMENT

POINT, MAKES IT SMOOTH, ALL POWDER COATED STUCTURE RUST PROOF ALL

HARDWARE CAPPED PROTECT FROM THE RUST UPPER AND LOVER CAPPED.

Informatory sings:- Providing and fixing sing boards made out of 2 mm

aluminium sheet; size 80 x 60 cms. Rectangle as per design of IRC 67-1977.pre

treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specification; 3.1 m long stand post

4 and frame fabricated from suitable size iron agle of 35 x 35 x 3 mm,75 x 75 x 6 10 4099.59 Nos.

mm as required;painted with best quality epoxy coating in block and white

bends.The details of symbol for each board shall be as per the insruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x

Cms.for each leg.including excavation,curing etc.complete under the

supervision of engineer in charge.(B)High intensity Grade.

5 Inauguration Plate:

(A) Computer graphic design: UV Printing on 3mm ACP composite panel sheet

(Silver colour brush finish), Matt lamination including transportation etc.As per 1000 9.44 S. Inch.

Architect/Consultant Drawings, Instruction & Suggesion.

(B) Stainless steel takti stand: 2 or 3 inch dia S.S. pipe, 16 x 8 Inch 2 mm thick S.S.

plate with frame size 30 x 42 inch including fabrication and transportation work 100 92.34 K.G.

etc.As per Architect/Consultant Drawings, Instruction & Suggesion.

Providing & Fixing of retro refectories cautionarystreet signedges made out of

mm thick ACP sheet with Retro reflective latter types 11 joint on it this ACP sheet

is framed on MS frame of box section size 38 x 38 mm medium guage welded

with 38 mm x 6 mm flate plate as per drawing and details, supported on a

75X75X4mm Square pipe fixed to the with foundation R.C.C. (1:1.5:3)

0.50X0.50X0.70 and Size of Column 0.45X0.45, 0.70mt height fixing with S.S. plate

as per Dimension given in drawing. Including foundation bolt and foundation

plates as per drawing etc, as directed by engineer in charge.

Total amount of Activity Area Equipments & Signages

Total amount of Activity Area Equipments & Signages

Exacavation for foundation include. Sorting out & stacking of useful materaials

1 & disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

(A) Loose or soft soil

(1) Up to 1.5 Mt.depth For G. Beam 0 117.26 C.M

Boring holes 3.50 mt. Deep in ordinary soil ( for cast in situ piles ) & disposal of

the surplus excavated soil as directed within a lead of 50 mt.

Providing Dry Rubble Soilling of various thickness to required grade including

3 trimming of earth work hand packing the interstics with Quarry Spalls complete

for all leads and lifts.

(A) Foundation and plinth 0 1054.26 CM

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg

20m.m Nominal size)&curing comp. incl. cost of form work in :

A) Foundation and plinth. In side of Gazebo 0 3005.76 C.M

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone

agg. 20 mm nominal size)& curing comp. Includ.cost of form work but exclu.

Cost of reinforcement for reinforced concrete work in : (A) Foundation, footing,

Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded

6 stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost

of form work but excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1) Having c/s area up to 0.08 s.mt. Above G. Beam 0 12632.6 C.M

(1) Having c/s area up to 0.08 s.mt. 0 9102.61 C.M

Providing & Laying c.c. 1:3:6 (1 cement : 3 coarse sand : 6 crushed stone

7 aggregate 20 mm nominal size ) & curing etc. comp. Include. Cost of form work

in : Upto G.L./P.L.

Wall caps / copings 0 3982.62 C.M

Providing & Fixing TMT / CRS bar reinforcement for RCC work including

bending, binding and placing in position comp. Upto floor two level.

Providing & Const. Brick work using fly ash building brick having crushing

9 strength not less than 35 kg./cm in foundation and plinth in C.M. 1:6 ( 1 cement, 0 4237 C.M

6 fine sand ) etc. comp.

Prov. & filling in plinth with yellow soil or selected soil in layers of 20 cm. Th. Incl.

Watering , ramming & consolidation etc. comp.

Providing & applying 10 mm thick cement plaster in single coat on brick walls &

similar surfaces for plastering & finished even & smooth with a floating coat of

cement slurry mixed with admixture of lime or neeru in required proportion etc.

Providing & applying 20 mm thick sand faced cement plaster on walls or similar

surfaces at all floor levels, consisting of 12 mm AV. Th. backing coat of CM 1:3 (

1 cement 3 sand ) & 8 mm thick finishing coat of CM 1:1 ( 1 cement 1 sand )

etc. Comp. All Floor

Providing & laying River Wash Black granite slab 18mm thick in flooring, treads

of steps and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

13 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete. (Basic Rate:-

Rs.1614.0/S.M.) For River Wash add 100 rs (=2422+100 = 2522)

Ground Floor 61 2522 S.M.

14 (C ) Labour Charges For Edge Finished For Granite 16 70 RMT.

Fabrication, installation and fixing of Tensile fabric over MS Members as per

following methodology, Design, structural analysis, detailed engineering & shop

drawings as per plan area.

MS Frame : Supply, fabrication and installation in position of MS Frame

including base plate, stiffeners, pipes, with anchors as per approved drawings.

15 Painting : Painting with P.U. Primer and two coats PU paint in approved shade 100 6500 S.M.

on the MS Frame making it completely ready to take the tensile fabric as

specified Fabric: Providing, patterning, cutting, heat welding to required shape

and Installation of the Tensile Fabric Ferrari -902 to the MS Frame with necessary

fixing accessories like GI wire, SS 304 profile laser cut plates, SS fittings, etc. (RCC

for footing and all concrete works shall be paid separately.)

Wall painting with two coats of acrylic emulsion plastic paint of approved

16 brand over existing surface to give an even shade & surface free from mortar

dropping & other foreign matter & sand papered smooth etc. comp.

(A) For wall & similar surfaces 40 79.39 S.M.

Total Amount of Gazebo

Total Amount of Gazebo

Total amount of Redevelopment of Zaverchand Meghani Garden, Surat

Total amount of Redevelopment of Zaverchand Meghani Garden, Surat