REPAIR/ MAINT OF FIREFIGHTING INSTA INCL FIRE FIGHTING PUMPS, FIRE HYDRANT SYSTEM, SPRINKLER SYSTEM, HOSE REELS, HOSE BOX AND OTHER CONNECTED MISC WORKS AT NAVAL BASE AND ADJACENT AREAS WITH CERTAIN WATER SUPPLY WORKS UNDER GE (U-II) (V)

Material and labour for Stainless steel Single Headed Oblique Type Hydrant Valve (Type 'A') with Cast Iron operating wheel, Inlet 80mm & Outlet 63mm Instantaneous, IS:5290, ABS Blank Cap including taking down unserviceable hydrant valve of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Stainless steel Double Headed Oblique Type Hydrant Valve (Type 'B') with Cast Iron operating wheel, Inlet 100mm & Outlet 63mm Instantaneous, IS:5290, ABS Blank Cap including taking down unserviceable hydrant valve of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for 63 mm dia instantaneous Male/ Female Coupling stainless steel as per IS:903. including taking down unserviceable coupling of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for stainless steel hand controlled Nozzle hydraulically crimped to hose with metal crimping, Spray and Shut off functions, Operating at 10 bar working pressure, with 20mm diameter including taking down unserviceable nozzle of any description, complete all as specified and directed by Engineer-in-Charge.

S & F in repair single hydrant stand post made of MS pipe of size 80 mm bore heavy grade, 1.50 m height with 90°, duck foot bend both end flanged and including welding if required to suit single/ double fire hydrant valve and testing, complete all as specified and directed by Engineer-in-Charge.

Material and labour for ISI marked non-percolating flexible firefighting delivery hose of length 15 meters, synthetic fiber circular woven jacketed, bearing IS:636-2018, 63 mm dia, complete with stainless steel instantaneous male & female coupling (IS:903), and Copper Wire binding including taking down unserviceable firefighting delivery hose of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Swinging Hose reel Type-A, Wall Mounted with 180° swing, specifications as per IS-884: latest revision made of high quality mild steel, powder coated in red colour, Hub width approx 230 mm, Maximum operating pressure 10 bar, Flow rate 22.5 lpm at 7 bar pressure including taking down unserviceable hose reel drum of any description, complete all as specified and directed by Engineer-in-Charge.

S & F in repair two way fire brigade inlet connection with isolation valve with instataneous gun metal coupling 63mm dia complete all as per fire standards made out of 150mm dia class 'B' MS pipe, complete all as specified and directed by Engineer-in-Charge.

S & F in repair four way fire brigade inlet connection with isolation valve with instataneous gun metal coupling 63mm dia complete all as per fire standards made out of 150mm dia class 'B' MS pipe, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Fire Hose Box fabricated from 18 gauge CR sheet with double door, with full front glass inspection window and locking arrangement (Common Key Lock), duly painted with PO Red colour outside and white colour from inside (two coats of synthetic enamel paint), Size 30"X24"X10", 3mm thick Acrylic glass, (Suitable to accommodate 2 lengths of 15mtr, Hoses & 1 no. branch pipe with Nozzle) including taking down unserviceable fire hose box of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Fire Hose Box fabricated from 18 gauge CR sheet with double door, with full front glass inspection window and locking arrangement (Common Key Lock), duly painted with PO Red colour outside and white colour from inside (two coats of synthetic enamel paint), Size 24"X18"X10", 3mm thick Acrylic glass, (Suitable to accommodate 1 lengths of 15mtr, Hoses & 1 no. branch pipe with Nozzle) including taking down unserviceable fire hose box of any description, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Gun metal Short Branch pipe, with 63mm male instantaneous inlet, male threaded outlet, with 20mm bore hexagonal base nozzle, bearing IS:903 mark including taking down unserviceable branch pipe of any description, complete all as specified and directed by Engineer-in-Charge.

M&L for construction of brick masonary valve chamber of following internal dimension with angle iron frame and MS sheet cover 3mm thick duly painted 2 coats of red oxide/ zinc chromate primer including lifting handle, locking arrangement, excavation and earth work, plastering including dismantling of old valve chamber of any size and taking out rusted MS sheet with angle iron frame, complete all as specified and directed by Engineer-in-Charge:-

900 mm x 900 mm x 900 mm

1200 mm x 1200 mm x 1200 mm

Supply and fix FRP Composite OHT / UG Water Tank Cover of following sizes made of standard designs conforming to IS:1726-1991, having load bearing of 2.5 TON including frame, complete all as specified and directed by Engineer-in-Charge:-

90 cm x 90 cm

60 cm x 60 cm

45 cm x 45 cm

Excavation in trenches in soft/lose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully the existing motor of following capacities from foundation bed for servicing by removing the coupling, cleaning the motor & stator body with cleaning agent, varnishing, to improve the insulation values reassembling and re-installing the motor with necessary bolts, nuts and washers and connecting the pump set, complete all as specified and directed by Engineer-in-Charge:- Note : Bearings shall be measured and paid separately under relevant item of BOQ

100 HP to 125 HP

40 HP to 80 HP

Upto 20 HP

M&L for disconnecting and removing the existing defective Mono block / centrifugal pumpset motor of any make of following capacity from the installed position by putting dummy plate to suction and delivery removing the burnt out winding and re-winding the same with super enamelled copper wire of same gauge and same No of turns of existing make insulating winding with existing class of insulation varnishing baking up including replacement of base foundation nuts, bolts and re-installation of pump, testing to satisfactory performance, complete all as specified and directed by Engineer-in-Charge:- Note : Bearings, CI gland plates, Terminal block, shaft shall be measured and paid separately under relavent items of BOQ

100 HP to 125 HP

40 HP to 80 HP

Upto 20 HP

100 HP to 125 HP

40 HP to 80 HP

Upto 20 HP

M&L for replacement of pumpset coupling star/ rubber with rubber band, nuts and bolts for the following capacity, complete all as specified and directed by Engineer-in-Charge:-

Upto 20 HP

M & L in repairs for gland packing of required size gland superior quality to centrifugal / monoblock pumps of following capacities, complete all as specified and directed:-

Upto 20 HP

Supply only ball bearings suitable for centrifugal and mono block pumps motors as existing at site, complete all as specified and directed:-

Upto 20 HP

Supply only CI gland plate high tension studs for Centrifugal / mono block pumps for the following capacity, complete all as specified and directed:-

Upto 20 HP

Supply only CI impeller/turning of following capacities, suitable for centrifugal/monoblock pumps of the specified capacities, to replace the existing impeller if found non-repairable, complete all as specified and directed:-

Upto 20 HP

Supply and fix 3 pole power contactor of existing model for AC 415 Volts, 50 Hz, 3 Phase suitable for electric motor of following capacity including removing existing unserviceable one from star delta starter, complete all as specified and directed:-

100 to 125 HP capacity.

40 to 80 HP capacity.

20 to 35 HP capacity.

Upto 20 HP

Supply and replace burnt bimetal over load relay suitable for the following capacity of motor starters as existing at site, complete all as specified and directed:-

100 to 125 HP capacity (relay range 180-300 Amps)

40 to 80 HP capacity (relay range 45-75 Amps)

20 to 35 HP capacity (relay range 20-33 Amps)

Upto 20 HP

Supply and replace Pump Shafts as per existing Model with necessary metal filling and machine suitable for the following capacity of pump sets, complete all as specified and directed:-

Upto 20 HP

20 to 35 HP capacity

40 to 80 HP capacity

100 to 125 HP capacity

Supply and replace Casing ring for Centrifugal / mono block pumps for the following capacity, complete all as specified and directed:-

Upto 20 HP

20 to 35 HP capacity

40 to 80 HP capacity

100 to 125 HP capacity

Supply and replace unserviceable brass air cock of suitable size to pump sets as mentioned above, complete all as specified and directed.

Burning out lead joint in position including removing old lead to store for the following sizes, complete all as specified and directed:-

150 mm bore

200 mm bore

250 mm bore

Material and labour for run lead joint for spigot and socket pipes (CI/DI) and fittings of following sizes, complete all as specified and directed by Engr-in-Charge:-

150 mm dia

200 mm bore.

250 mm bore.

Supply only DI Specials (any type radius and angle) tapers any type straight increasing decreasing or double socket and ''Y junction double branch ,Collar, cross (all sockets or socket and spigot) caps and plugs upto 300 mm bore, complete all as specified and directed by Engr-in-Charge

Supply & laying MS ERW pipe of following dia heavy grade for inserting in position, making leak proof joints including fittings and testing the pipe line for leakage, taking down unserviceable including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge:-

200 mm dia

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

Supply and fix Sprinkler Quick / Early response type as per IS 15105/TAC guidelines 79 degree temperature rating pendant type including taking town old one, complete all as specified and directed.

All as per Srl item No. 41.00 here-in-before but upright type complete.

Supply only MS slip-on weldable flange suitable for 200 mm NB pipe, complete all as specified and directed.

Supply only MS slip-on weldable flange suitable for 150 mm NB pipe, complete all as specified and directed.

Supply only MS slip-on weldable flange suitable for 100 mm NB pipe, complete all as specified and directed.

Supply only MS slip-on weldable flange suitable for 80 mm NB pipe, complete all as specified and directed.

Supply and lay in repair GI water tubing galvanised medium grade in floors/ on roof /on wall / trenches including all fittings of following sizes, complete all as specified and directed by Engineer-in-Charge:-

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe of following size including dismantling old one, complete all as specified and directed by Engineer-in-Charge:-

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

80 mm dia bore

M & L for arresting water leakage from sluice valve, by refacing, regrinding of sluice Valve, Repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replaceing old check nuts with new one made out of MS/CI material, with and including replacing perished gland packing, rubber gasket, bolts and nuts, complete all as specified and directed by Engineer-in-Charge:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

S&F in repair Sluice valve of cast iron body of following sizes with flanged ends duly drilled ISI marked as per IS (14846-2000) PN - 1.6 with SS spindle and check nut including operating wheel etc. and fixed with new bolts, nuts, washers and rubber insertion packing, complete all as specified and directed :-

200 mm dia

150 mm Dia

100 mm Dia

80 mm Dia

Supply and fix in repair Cast carbon steel non-return valve swing type as per BS.1868 Class -300 & flange drilling ANSI B.16.5 Class-300, with body disc & cover, CCS-SA 216 Gr WCB Body & Disc seat-ring SS-410/304, Hinge pin SS-410, Bolts & nuts SA 193/194 Gr B7/2H etc complete including replacement of perished nuts, bolts, washers and rubber gasket etc.of following sizes, complete all as specified and directed by Engr-in-Charge.

100 mm dia

150 mm dia

200 mm dia

Supply and fix in repair CI foot valve ball type with necessary rubber gasket, bolts, nuts and washers for following size, complete all specified and directed:-

80 mm bore

100 mm bore

150 mm dia.

200 mm dia.

Supply and fix in replacement of CI Butterfly valve of size 150mm nominal bore as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts, bolts, washers etc. including taking up / down of existing unserviceable butterfly valve of any description, complete all as specified and directed.

All as per item No. 53.00 here-in-before but of size 100mm NB

All as per item No. 53.00 here-in-before but of size 80mm NB

Supply and fixing in replacement of pressure switch in IP55 enclosure CE marked suitable to use in auto fire pump control system, permissible operating pressure 18 bar, pressure setting range 4-12 bar and differential 0.5-1.6 bar, pressure connection G 1/4A, with silver contact material, rubber cable gland for cable entry including taking down of existing unserviceable pressure switch of any description, complete all as specified and directed.

Supply and connecting in replacement of 2 core, 2.5 sqmm power cable with copper conductor, PVC insulated, cores laid up, PVC inner sheathed, armoured with galvanized wire or galvanized steel strip, overall PVC Sheathed, 1100V grade as per IS:1554(Part-1) laid / fixed in cable duct / fixed to walls / steel posts etc including taking out of existing unserviceable control cable of any description, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of 3 phase digital Voltmeter / Ammeter, Cl 0.5 flush mounting suitable for fixing in existing panel, complete all as specified and as directed.

Supply and fixing in replacement of Programmable Logic Control (PLC) system suitable for existing automatic fire fighting pumps control panel, complete all as specified and directed by Engineer-in-Charge.

Supply and replace LED tube light fitting alongwith with fixture 22 Watts, complete all as specified and directed.

M&L Synthetic mat (rubber matting) suitable for 11000 Volts electrical grade 2mx1mx19mm thick chequered top, ISI marked to be laid in front of LT panel board, complete all as specified and directed.

Servicing of soft starter 415 Volts suitable off size of different capacity installed at various location, dismantling the existing soft starter, servicing the same, replacing the defective spare parts and refixing it at the original place, complete all as specified and directed by Engineer-in-Charge.

Supply and replace PVC cooling fan suitable for the existing motors of various capacity including testing and commissioning, complete all as specified and directed by Engineer-in-Charge.

Supply, fixing and testing of soft starter 415 Volts suitable for Pump of capacity 40 to 80 HP in existing LT panel with necessary fixing arrangements including taking down existing unserviceable, complete all as specified and as directed by Engr-in-Charge

All as per Srl Item No. 64 of the above but of capacity 100 HP to 125 HP.

M&L for disconnecting / removing the old unserviceable starters from the panel and supply and fix DOL/ starter Delta Starter for AC, 415V 50 Hz 3 phase suitable for following capacity of electric motor, complete all specified and directed:-

Upto 20 HP

Supply, laying in trenches or fixing on wall or passing through pipe or in cable ducts, XLPE insulated PVC screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of 3.5 core 95 sqmm size including taking out old un-serviceable cable, complete all as specified and directed.

All as per Srl item No. 67 but of 3.5 core 150 Sqmm complete.

Taking down carefully existing motor and pump set from the unserviceable bed and taking up the complete MS bed from the PCC and cleaning and levelling the bed including new PCC work including with fabrication of new MS bed by using new MS work with foundation bolts and nuts suitable for mounting/re-erecting the pump and motor after necessary minor repairs complete with two coats of existing colour painting over a coat of red oxide and testing and commissioning, complete all as specified and directed.

Material & Labour for painting to old painted steel surfaces of Centrifugal/ monoblock Pump sets of any capacity with one coat of synthetic enamel paint including cleaning, scraping foreign material and degreasing surfaces, complete all as specified and directed.

Material and labour for preparing new or previously untreated / old painted steel surfaces of water pipe lines of size 200mm dia, in any position, with two coats of synthetic enamel paint over one coat of red oxide primer with & including marking direction of flow / name of feeder, complete all as specified and directed.

All as per item No. 71.00 here-in-before but of size 150mm dia

All as per item No. 71.00 here-in-before but of size 100mm dia

All as per item No. 71.00 here-in-before but of size 80mm dia

All as per item No. 71.00 here-in-before but of size 50mm dia

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, 25x4mm galvanised iron strip including taking down of existing corroded GI earth continuity conductor of any description, complete all as specified and directed by Engineer-in-Charge.

M&L for stone masonry for walling of random rubble, uncaused, well bonded, built in cement mortar 1:4 for construction of thrust block for the support of water supply pipe line including demolition of existing masonry work, complete all as specified and directed by Engineer-in-Charge.

Supply and fix water pressure gauge standard dia 4" dia dial , Range 0-21 Kgs at the delivery side of pump sets complete tubing, fitted with stop cock etc, complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in conduit pipe of 20/25 mm size complete with PVC rectangular block with 3mm thick for mounting switch/ sockets regulators etc.and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light/ fan point controlled by one switch including taking down of old wiring, complete all as specified and directed by Engineer-in-Charge.

All as per serial item No. 79 above but for 3 pin socket outlet point controlled by one, one way switch on the same board.

All as per serial item No. 79 above but for one 3 pin switch socket combination of 5 Amp capacity on independent board.

All as per serial item No. 79 above but for 3 pin switch socket combination of 15 Amp on independent board with cable 4 sqmm unsheathed stranded 1100 Volts grade complete with 4.0 sqmm PVC insulated earth wire and connecting to earth dolly, complete all as specified and as directed by Engineer-in-charge.

Supply and fix switch piano type 5 Amp single pole one way, complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch socket combination 2 in 1 , 3 pin 5 Amp flush type, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stepped type, electronic ceiling fan regulator, complete all as specified and directed by Engineer-in-Charge.

Supply and fix ceiling rose surface backelite three terminal, complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB SPN 240 Volts 32 Amp breaking capacity 10 KA rating, complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB SP 240 Volts 5 to 32 Amps breaking capacity 10 KA ratingcomplete all as specified and as directed by Engineer-in-charge.

Supply and fix sheet metal enclosure powder painted for MCB SPN 12 way DB double door with din rail and bus bar including making good to the disturbed surface matching with the existing, complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 89 above but for 08 Way DB.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers, complete all as specified and directed.

Supply and fix in repair 3 core 1.5 sqmm PVC copper cable multi stranded drawn through inside pole from the bottom connector to fitting including providing necessary lugs complete incl taking down the existing wire, complete all as specified and directed.

S & F in repair of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position incl dismantling of old water tanks, complete all as specified and directed.

All as per Srl Item No.94.00 of the above but of capacity 1000 ltrs.

S & F in repair Ball brass valves, high pressure, with polythene float and flynut of size 25 mm dia complete of, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.

All as per Srl Item No. 83 of the above but of size 32 mm dia.

All as per Srl Item No. 83 of the above but of size 40 mm dia.

S&F in repair MCCB 4 Pole, 415 V, fixed type, 63 to 125 Amps with breaking capacity 16 KA, complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCCB 4 Pole, 415 V, 160 Amps with breaking capacity 36 KA, complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCCB 4 Pole, 415 V, 200 Amps with breaking capacity 36 KA, complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCCB 4 Pole, 415 V, 400 Amps with breaking capacity 36 KA, complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCCB 4 Pole, 415 V, 630 Amps with breaking capacity 50 KA, complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCB 4 Pole, 415 V,,40 to 63 Amps, C Curve with breaking capacity 15 KA, complete all as specified and directed by Engineer-in-Charge.

Supply fix fire Extinguisher ABC type of 9 Kg for installations and DG control room, complete all as specified and directed by Engineer-in-Charge.

Supply only first aid box kit complete for installations and DG control room, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair Flood light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary fixing arrangment all as specified and directed by Engr-in-charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth strip protected by galvanised iron pipe 40 mm bore, medium grade and connected to main switch board or main control board / DG Set as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 3 of MES Schedule Part- I and testing, complete all as specified and directed by Engineer-in-Charge.

M& L for servicing of LT panels of any size by cleaning the panel, bus bar chamber with CTC solution, and welding the door using arc welding and fixing hinges, necessary nut and bolts, washers and made it completely functional for open/ close including painting of panel by spraying with two coats of epoxy based paint over a coat of red oxide primer, after cleaning of rusty panel surface both inside/ outside by emery paper and necessary preparation of smooth surface suitable for painting and including checking of incoming and outgoing connections, Re-fixing of existing ACBs & MCCBs, testing & commissioning, connected PCC & frame works, rewiring of control and power wiring with suitable size of FRLS copper cable but not less than 1.5 Sqmm, replacing of various unserviceable ON/ OFF switches, lugs etc making the panel fully functional, complete all as specified and directed by Engineer-in-Charge.

Surface dressing in soft/loose soil not exeeding 15 cm deep, across the pipe lines and including site clearence, cutting and cleaning of branches / bushes / plants / grass obstructing the pipe lines / valves / chambers / sumps / OHTs on either sides and water supply Installation area including disposal of materials up to a distance not exceeding 50 m, complete all as specified and directed by Engr-in-Charge.

SCHEDULE OF CREDIT Note :- Amount of Rs. 1,64,380.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

Please Enable Macros to View BoQ information