Repairs to damage portion of SR & IP Side inciuding lining from 120.00 to 128.00 Km of ILC

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer,In area of light jungle, Etc complete lead and lift as directed by engineer incharge of site

Removing and hauling all kinds of soil / soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by mechanical means including cost of all materials, machinery, labour, rampways and all other ancillary operations complete. Etc complete lead and lift as directed by engineer incharge of site

Providing and laying insitu vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates withplacing and sinking plums of size 150 to 80 mm upto 15 pwesent for pier / gravity type retaining walls / abutments other similar etc., including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations completed.

Providing casing embankment using semi-pervious / pervious soil from approved dump areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges /sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller etc., complete with lead upto 1 km and all lifts.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.

Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing stone chips and mortar into joints, finishing, curing and all other ancillary operations complete. Note: If 150 mm thick murum bed is to be provided below pitching, ad

Providing and laying insitu vibrated M-10 grade cement concrete using 80 mm down approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete.

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 1000 mm dia

Executive Engineer

KBJNL,IBC Division