REPAIR/MAINT OF ROOF SHEET, SHUTTERS, PLINTH PROTECTION, HARD STANDING, WINDOW, FLOOR, PERIODICAL WORKS AND CERTAIN MISC WORKS IN MES INSTALLATION / YARD UNDER AGE B/R -I AND AGE B/R-II AT GE (WEST) BAREILLY.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone 20-25 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing all as specified and directed.

M&L for Non - skid designer coloured ceramic tiles7 to 8 mm thick including borders tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement to match including 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for non- skid designer ceremic coloured tiles 7 to 8 mm thick including borders tiles (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of floor or wall tiling and 15mm thick screed bed in cm-1:6 all as spd or as directed.

M&L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300x200 mm jointed and pointed with coloured cement to match including 10 mm thick rendering of cement mortar 1:4 and dismantling of tile including cement mortar bedding complete all as specified or as directed.

M&L for coloured Border Glazed designer heighliter printed tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 450x300 mm jointed and pointed with coloured cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of tile including cement mortar bedding complete all as specified or as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness including terrazo tiling (below or above ground level) complete all as specified and directed.

S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate , in Plinth protection 50mm thick finished even and smooth without using extra cement including making joint 12 wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of floor /paving etc complete all as specified and directed.

M & L Proviiding 100mm thick Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface finishing cement concrete surface even and smooth complete .

M & L Formring construction joints 20mm deep x 10mm vide filled with sealing compound grade "A" complete all as specified and directed.

S&F rubber moulded coloured Chequered cement concrete tiles 20cm x 20 cm x 22 mm thick, bedded over and including screed bed 20mm thick in CM 1:6 set and jointed in neat cement slurry and pointed with white cement and pigment and dismantling of existing tile including cement mortar bedding complete complete all as specified and directed.

M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand and dismantling of old unserviceable tiles complete all as specified and directed.

M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repari Vitreous China Urinals Bowl type flat back, white 465x355x265mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specified and directed.

S&F CP spreader for urinals complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying Two coats of Cement based paint of approved shade/tint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of Cement based paint complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of wall/roof/Chajja projections including facia, cornices including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and etc and applying two coat of weather proof exterior emulsion paint upto five story building with necessary scafolding complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means), Shade and coloured as approved by Engr-in-Charge.

M&L for preparation of Old plastered or unplastered surfaces of wall/roof/Chajja projections including facia, cornices including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and etc and applying one coat of weather proof exterior emulsion paint upto five story building with necessary scafolding complete all as specified and directed. Note- Emulsion to be carried out through air less spray machine ( Mechanical means), Shade and coloured as approved by Engr-in-Charge.

M&L for two coats of birla white putty or JK wall putty avg 3mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

Taking down of chowkats of frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified.

Taking down of chowkats of frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed

Taking down shutter of any description exc 1sqm and not exc 2 sqm each complete all as specified and directed

Taking down shutter of any description exc 2sqm each complete all as specified and directed

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F for steel ventilators with top fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glass shall be measured and paid for separately).

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of oil bound distemper with roller of approved shade/tint complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-inCharge.

S&F 100 mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150 mm long mild steel handle handles cast type anodised complete all as specified and directed

S&F Mild steel sliding door bolts 300mm, plate type, stove enamelled black, with bright bolt not lessthan 12mm dia with and including a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for painting to newly steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of oil bound distemper with roller of approved shade/tint complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, in roof coverings complete all as specified and directed.

Dismantling Asbestos cement (Corrugated,semi corrugated etc) sheets in roof coveringcomplete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified

Taking down cement plaster from brick wall including racking out joints hacking for key and scrubbing down with water complete all as specified

M & L for brick work with sub class ‘B’ brick straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) complete all as specified and directed

M&L for 15mm thick rendering on surfaces of brick work or stone walling in CM 1:6 finishing the surface fair & even complete all as spfd and directed.

M&L for 15mm thick rendering on brick work or concrete surface in CM 1:4 mixed with WPC @ 2% by weight of cement finishing the surface fair & even complete all as spfd and directed. Note:- WPC shall be measured and paid saperately.

M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement icomplete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed

M & L for preparation of newly plastered surfaces of wall and applying two coat white wash complete all as specified and directed

M & L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper with roller of approved shade/tint complete all as specified and directed.

M&L two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces, complete all as spfd and directed.

M & L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of white cement wash complete.

Dismantling timber scantlings 40 sqcm & over in section , in any position unframed work. complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M & L for Rolled mild steel sections/Steel Pipes conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete gde Fe-410-W or GDe250-A quality complete all as specified and directed

S&F wind ties for roof incl securing bolts, including all necessary drilling, bolting or riveting, etc complete all as specified and directed

S & F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed L type or J type Hooks complete all as specified and directed

All as per item no above but expect sheets complete all as specified and directed

M & L asbestos cement 6 mm thick two Pices adjustable plain wing Ridge fixed with L type or J type hooks complete all as specified and directed

S& F Pre -paited galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws complete all as specified and directed

S& F Pre -paited galvalume aluminium zinc

coating GI based plain steel sheet 0.50 mm thick of an color having tensile strength of 550 MPa as in roof covering /cladding to wall ,fixed with self tapping screws complete all as specified and directed

S& F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

Demolition of reinforforced cement concrete as in Roof, floors (Other than ground floors ) beams, Staircase ,landing chajja,and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed

M & L Reinforced Cement Concrets type B -1 1:2:4 (using 20 mm graded stone aggregate) as in Chajjas, shelves etc. complete all as specified and directed

S & F Mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of white wash complete all as specified and directed.

M & L Form work to chullah hoods, shelves, chajjas, through and similar items including edges in flat surfaces for rough finish surfaces. complete all as specified and directed

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed.

M & L for welding in repair n. exc. 2.5cm in length, thickness of mild steel members to be welded not exc 6mm thick complete all as specified and directed

M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for glazed coloured ceramic size of each tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 300 x 300 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.

All as per Serial item No 88 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed

M&L for Ceramic tiles light shade 10mm thick (square) polished, size of each tiles 600 x 600 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed

All as per serial item No 90 but as in vertical surfaces incl plastering 10mm thick in CM 1:4,complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, over and including 20mm thick screed bed or bedding layer in cement mortar 1: 6, for laying floor finishes including dismanteling of existing kota stone all as specified and directed by Engr-in-charge

M& L for providing precast cement concrete rubber moulded chequered coloured tiles size 30 x 30 cm & 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 80 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall including dismentling of cast iron /PVC/AC/SGSW pipes in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F PVC(SWR) 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall including dismentling of cast iron /PVC/AC/SGSW pipes in cement mortar and taking out of trenches, if requiredcomplete all as specified and directed

S&F sheet glass of 3mm,ordinary quality and glazing with oil putty or wooden beading in squares n.exc 0.5 Sqm in each pane,complete all as specified.

M & L for painting to newly wood and wood based surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated surfaces all as specified or as directed.

S&F PVC (SWR) 75mm dia bends complete all as specified and directed.

S&F in repairs double legged door stopper of aluminium alloy with rubber complete all as specified and directed

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, and hacking out broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repairs tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges complete all as specified and directed

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary and applying two coats of OBD after preparetion of newly palster surface complete all as specified and directed.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra Cement complete all as specified

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely

M&L for preparation of new plastered surfaces of walls and applying two coats Cement Base paint coats of oil bound distemper over a coat of primer complete all as specified and directed

S & F in repairs Galvanized mild steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F in repairs150

mm helical door spring complete all as spd and directed

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap.

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs waste fitting/cuppling 32/40 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed.

S&F in repairs grating doom 100mm dia of CP with or withous holes (minimum weight 50gms) complete all as specified and directed.

M&L providing FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm complete all as specified and directed.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

S&F 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repairs pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repairs stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.

S&F in repair aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 100 x 40 x 1.20 mm thick b) Double Groove section: 100 x 40 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified.

S&F in repair Anodised aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron)

S&F in repair Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron)

S&F Sheet glass, ordinary quality and glazing with oil putty in square but n exc 0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture

S&F in repair Mortie lock, verticle type size 100 mm mild steel

Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as

directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed