Loading
Loading…
Loading…
Tender Value
₹47.7 L
EMD Value
₹95,500
Closing Date
7 Jul 2026, 5:00 pm
Similar tender results from the same govt authority in the past 3 years.
Sr Manager E/M-III
Noida Authority Office Sector 39 Noida
Providing Decorative Pole and High Mast on Internal road of F and G Block sector-44, Noida
2026_NOIDA_1163511_1
51/GM(E/M)/SM(E/M)-III/2026-27
Open Tender
Electrical Works
120 days
Noida
Please refer to tender documents
3 documents required · 3 mandatory
₹2,124
Noida
₹95,500
24 Jun 2026
24 Jun 2026
8 Jul 2026
24 Jun 2026
7 Jul 2026
24 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing and commissioning of standard 4.0 mtr High decorative pole with top post LED Fixture and foundation etc. Complete all accessories as required by E/I (AOR)(Make - VAK/ NERI/Mayfair/K-lite/Kesslec) | 80 | Nos. | 17,697 | ₹14,15,760 |
| 2 | Errection of matelic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : graded stone aggretage 40 mm nominal size) foundation including excavation and refilling etc. as required bove 4.5 mtr and upto 6.50 mtr DSR Electrical 2018/I No. 11.3.1 | 80 | Nos. | 4,492 | ₹3,59,360 |
| 3 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.. (PS No. 652).(Make - Bajaj/Valmont/Transrail) | 4 | Nos. | 2,72,580 | ₹10,90,320 |
| 4 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.. Complete in all respects. (PS No. 1454) Cat-AAA (Make - LT/Bajaj /Havells/Crompton/Philips/Wipro) | 24 | Nos. | 11,257.2 | ₹2,70,172.8 |
| 5Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. P.S. No. 501 (Polycab, KEI Havell's, make) | |||||
| 5.1 | (1) 16 Sq.mm. 4.0 Core (PS No. 501) | 1,980 | Mtr | 404.74 | ₹8,01,385.2 |
| 5.2 | 2) 25 Sq.mm. 3.5Core (PS No. 501) | 120 | Mtr | 440.14 | ₹52,816.8 |
| 6S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads, insulating with tape and making connection etc. complete in all respects as per direction of E/I. P.S No. 504. | |||||
| 6.1 | a) 16 Sq.mm. | 352 | Nos | 24.78 | ₹8,722.56 |
| 6.2 | b) 25 Sq.mm. | 18 | Nos | 31.86 | ₹573.48 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_2181235.xls
BOQ • 0.31 MB
C.xls
Additional Documents • 0.04 MB
TD.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid