Repairing of Polyhouse-03 Nos.

Polyhouse Current Polyhouse Modification in This work needs to be done Dimension current Polyhouse 1. Net House Length x Breadth: 12.25 Side Height: 2.05 m 3.05 m Centre Height: 3.15 m 4.15 m • Polyho use side and centre height should be increased by 1m. • The polyhouse is to be fabricated using a 200 Micron UV transparent Polyfilm sheet. • The dimension of 12.25 m x 6.34 m x 1.10 m (Length x Width x Height) are to be fabricated with GI 40 Mesh Insect Proof Net on both side of polyhouse. • Plant stacking system (with SS wire) is to be installed. • 1 hp Pump ISI Mark is to be installed. 2. Polyhouse Length x Breadth: 18.5 m x 6.15 m Side Height: 2.10 m 3.10 m Centre Height: 3.12 m 4.12 m • The side and centre height of the polyhouse needs to be raised by 1 meter each. • The polyhouse is to be fabricated using a 200 Micron UV transparent Polyfilm sheet. • The dimension of 18.5 m x 6.15 m x 3.10 m (Length x Width x Height) are to be fabricated with GI 40 Mesh Insect Proof Net on both side of polyhouse. • A Plant stacking system (with SS wire) is to be installed. • A 500 Litre water tank needs to be installed for irrigation purposes. 3. Polyhouse 1380 mm exhaust fan (light weight ) : 2 Nos. with Motor Replacement of Cooling Pad : 16.16 sq meter and GI pad Gutter (10.10 m x 1.6 m x 0.07 m) Length x Width x Thickness 1 hp Pump ISI Mark for cooling pad : 1 Nos. 1.5 hp Pump ISI Mark for drip irrigation: 1 Nos. 500 Litre Water Tanks are to be installed: 02 Nos. Wire to be fitted for stacking of plants. Minor electricity work may be applied in all three polyhouses