Capital work of Line Maintenance Section Moozhiyar- Insertion of a tower in between location numbers 29 and 30 of 220kV Sabarigiri Edamon No I feeder at Anachantha for obtaining statutory ground clearance

Dismantling 3 Line Kundah from the tower detaching the clamps, connectors and line accessories from the conductor, winding and stacking the same at site.

Paving out, stringing and tensioning OF POWER CONDUCTORS including attaching insulator strings with arcing horns or rings on to the tower cross arms, clamping the conductor to the insulator strings using suspension clamps with armour rods and tension clamps, jumpering the conductors at tension points, jointing the conductors and pilot wire wherever necessary, installation of vibration dampers, hire charges of tractor and stringing tools, etc. complete.( Three line Kundah)

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50m by head load and initial lift of 1.5m at each end etc. - Manual labour for 1km for Tower extensions and other structures and all other materials including earthing materials.

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection including storage if necessary, loading and unloading charges with lead of 50m by head load and initial lift of 1.5m at each end etc. - By lorry over 9km and upto 10km for Tower extensions and other structures and all other materials including earthing materials.

Transportation of materials issued departmentally for the work from departmental stores and distribution to locations for erection - By lorry for every additional km or part thereof over 10km for Tower extensions and other structures and all other materials including earthing materials.[5.712 MT- for 22km]

5.22.6: Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

5.9.6: Centering and shuttering including strutting, etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts..

5.33.1: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work using cement content as per approved design mix including pumping of concrete to site of laying but excluding cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS:9103 to accelerate retard setting of concrete improve workability without impairing strength and durability as per the direction of Engineer-in-charge. Note: Cement content considered in this item is at the rate 330kg/cum. Excess of leess cement used as per design mix is payable or recoverable separately, all works upto plinth level.

Stub setting (using template/probe) for 110 kV towers. Erection of stub, stub template, fixing of jack for supporting template, allignment and leveling for exact location of stubs of stub setting template, dismantling of template after completion of initial curing of Cement concrete, movement of template from one location to another complete, as directed by Board staff. - general area (For 220 kV DC Towers (Genral) Wt of 220 kV/ Wt of 110 kV DC(.817/.533)xal)