Construction of New passenger shed at Gurseer pyt halqa Gurseer under MPLADS Jenab Abdul Rashid Sheikh Honble MP 18th Lok Sabha 2026-27 Block Sangrama

Earth work in excavation by mechanical means (hydraulic excavator) in foundation trenches or drains (not exceeding 1.5M in width as well as 10 m2 on plan) including dressing of sides ramming of bottoms lift up to 1.5 m including getting out the excavated soil abd disposal of surplus excavated soil within a lead of 1 M from edge of cutting. as directed by Engineer-in-Charge. All kinds of soil.

P/L of hand packed stone boulder/soling (as applicable) in foundation and plinth incl compaction,consolidation/ramming, carriage BY MT to site of work,filling of voids complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, drains, for mass concrete, foundation beam

Providing and laying Vitrified floor tiles(thickness to be specified by the manufacture with water absorption less than 0.008% and confirming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 mix including pointing the joints with white cement and matching pigment etc complete 600x600

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new wood work.

P/F of Structual Steel built up section in truss rafters, Purlines, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position

Providing of Colour Coated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick

Providing ridges or hips /valley of width 40cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2