ICDS – 2025-26 CONSTRUCTION OF VARIOUS ANGANWADI BUILLDING OF PARDI TALUKA , DIST-VALSAD (PKG-3) (4-Anganwadi) [1.] Goima Bangli Ta. Pardi Dist. Valsad. [2] Sonwada Gamtal Ta. Pardi Dist. Valsad. [3] Sukhesh Harijanwas Ta. Pardi Dist. Valsad. [4] Tarmalia Parsi Falia Ta. Pardi Dist. Valsad

Name of work :- CONSTRUCTION OF VARIOUS ANGANWADI BUILLDING OF PARDI TALUKA

DIST-VALSAD (PKG-3) (4-Anganwadi) [1.] Goima Bangli Ta. Pardi Dist. Valsad. [2] Sonwada

Gamtal Ta. Pardi Dist. Valsad. [3] Sukhesh Harijanwas Ta. Pardi Dist. Valsad. [4] Tarmalia Parsi

Falia Ta. Pardi Dist. Valsad.

: : BILL OF QUANTITIES : :

Estimated Estimate

Rate Total amount

Rate Total amount

Sr. according to

but may be Item of work Unit

No. In figures estimated

1 62.40 Excavation for foundation upto 1.5 m 149.83 Cu.mt

depth including sorting out and

stacking of useful materials and

disposing off the excavated stuff upto

Meter lead. (B) Dense or Hard Soil

2 31.20 Excavation for foundation for depth from 162.56 Cu.mt

1.5 m to 3.0 m including sorting out and

stacking of useful materials and

disposing off the excavated stuff upto

Meter lead.(B) Dense and Hard Soil

3 38.00 Filling available excavated earth 130.39 Cu.mt

(Including rock in trenches plinth, sides

of foundations etc. in layers not

exceeding 20 cm. in depth consolidating

each deposited layer by ramming and

4 101.88 Providing & filling in plinth with murrum 289.06 Cu.mt

or yellow soil or selected soil in layers of

20 cm. Thickness. Incl. watering,

ramming & consolidation etc. complete.

5 18.00 Filling in plinth with sand under floors 460.19 Cu.mt

including watering ramming,

consolidating and dressing complete

6 29.44 Providing and laying cement concrete 3313.29 Cu.mt

1:3:6 (1- Cement : 3- Coarse sand : 6-

graded stone aggregates 20 mm

nominal size) and curing complete

including cost of formwork in (A) PCC

7 18.16 Providing and laying Ordinary cement 4683.40 Cu.mt

concrete M.250 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in foundation,

footings base of column and mass

concrete. (A) Footing

8 5.44 Providing and laying Ordinary cement 8577.93 Cu.mt

concrete M.250 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts , upto Plinth

9 9.00 Providing and laying Ordinary cement 8542.58 Cu.mt

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts, upto Ground Floor

10 1.52 Providing and laying Ordinary cement 8582.98 Cu.mt

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Column D) Column, Pillers, posts and

struts, upto First Floor

11 26.08 Providing and laying Ordinary cement 6637.72 Cu.mt

concrete M.250 and curing complete

inculding the cost of formwork but

Excluding the cost of the cost of

reinforcement for reinforced concrete

work in Beams. (E) Beam, upto Plinth

12 16.00 Providing and laying Ordinary cement 6599.34 Cu.mt

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Beams,(E) Beam, Ground Floor

13 21.16 Providing and laying Ordinary cement 6167.06 Cu.mt

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in All Types of

Slab,All Thickness (C) Slab upto Plinth

and Ground Floor

14 1.08 Providing and laying Ordinary cement 6788.21 Cu.mt

concrete M.200 and curing complete

inculding the cost of formwork but

Excluding the cost of reinforcement for

reinforced concrete work in Chajja. Upto

15 10384.00 Providing TMT Bar FE 500D 76.23 Kg .

reinforcement for R.C.C. work including

bending, binding and placing in position

complete upto floor two level,Ground

Floor, First Floor , Second Floor, Third

Floor, Terrace Floor (all floor).

16 132.92 Brick work using common brunt clay 4295.99 Cu.mt

building bricks having crushing strength

not less than 35 kg/sqcm. in

superstructure above plinth level upto

floor two level in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B)

Conventional Ground Floor

17 14.20 Brick work using common brunt clay 4336.18 Cu.mt

building bricks having crushing strength

not less than 35 kg/sqcm. in

superstructure above plinth level upto

floor two level in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B)

Conventional First Floor

18 45.36 Half brick masonry in common brunt 716.37 Cu.mt

clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 (1- Cement : 3 -

coarse sand ) in (B) Conventional

19 533.72 Providing 15mm thick cement plaster in 171.80 Cu.mt

single coat on Rough (Similar)side of

single or Full/half brick walls for interior

plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:3 (1-cement :3-sand) Ground

20 183.32 Providing & laying10 mm. thick cement 153.67 SMT.

plaster in single coat on fair side of

ceilings for interior plastering upto floor

two level and finishing with smooth mala

plaster.(i) Cement mortar 1:3 (1 cement :

3 sand) Ground Floor

21 697.96 20mm thick sand faced cement plaster 300.66 SMT.

on walls upto height 10 metres above

ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc.

22 24.00 Providing throating or plaster drip and 42.17 RMT.

moulding to R.C.C. Chhajja.

23 39.68 Providing and laying polished Granite 2234.12 SMT.

Slab 18mm thick in Flooring laid 20mm

thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey

Cement Slurry including full molded

round front edges , rubbing and

polishing etc. complete.

24 58.76 Providing and laying polished Granite 2486.62 SMT.

Slab 18mm thick in Risers of steps

Dedo, window sill, jembs and pillars laid

10 mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed

with Grey Cement Slurry including full

molded round edges , rubbing an

25 221.36 Providing and laying Vitrified tiles, 24'' x 1073.13 SMT.

24'' in flooring treads of steps and

landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in

white cement.Soluble Salt PVT. Tiles in

26 138.16 Providing and laying Vitrified tiles, 24'' x 1141.45 SMT.

24'' in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with

white cement slurry Soluble Salt PVT.

Tiles in All Rooms.

27 17.20 Providing and fixing flush door both 3122.92 SMT.

sides laminated andshutter fabricated

from 35 mm thick solid core malemine

faced three layered pre laminated flat

pressed wood based exterior grade

bonded BWP/BWR synthetic resin

having stamped IS 12823 grade I type II

including Stainless steel decorative type

designs fixtures / fastening 2Nos.

Handles, 2Nos. Aldropes, towerbolt

etc.including I.T.W. triangular batten

patti of size 30m.m.x30m.m.etc. as per

architectural detailed drawing and as

directed by engineer in charge..

28 6.56 Providing and fixing FRP frame size 2615.04 SMT.

125x65 mm and 35mm thick FRP

shutter having extra reinforcement on

sides & edges in polish finish. The core

of the shutter & frame is to be filed up

with injected polyurethene foam done in

situ alongwith embedded wooden pieces

for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter

is to be water proof weather proof,

termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings &

fastener sleeve.

29 26.00 Providing and fixing window having 3477.63 SMT.

extruded aluminum Colour anodized

section frame main outer size 63.50 x

horizontal two track with Mosquitoe Net

member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with

sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size

0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing to

frame as per details etc complete for

30 4.00 Providing and fixing standared extruded 2525.00 SMT.

of alluminium section of size 63mm x

with colour anodized alluminium frame

for ventilation with 5 mm thick frosted

glass as details etc complete for

31 2154.72 Providing and fixing M.S. grill of required 111.61 Kg.

pattern of windows etc. with M.S.. flats at

required spacing and frame alround

square or round headed bolts and nuts

or by screws.including applying a

priming coat of red lead paint and two

coats of oil painting

32 534.00 Applying two coats of Birla (white 161.46 SMT.

cement based) or (acrylic lapy- putty) or

equivalent & two coats of primer of

approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the

surface free from mortar dropping and

other foreign matter and sand papered

smooth. with Wall painting (two coats)

with plastic emulsion paint of approved

brand and manufacture on undecorated

wall surface to give an even shade

including throughly brushing the surface

free from mortar droppings and other

foreign matter and sand papered

33 183.60 Applying two coats of Birla (white 166.87 SMT.

cement based) or (acrylic lapy- putty) or

equivalent & two coats of primer of

approved brand and manufacture on

new Ceiling surface to give an even

shade including thoroughly brushing the

surface free from mortar dropping and

other foreign matter and sand papered

smooth. Ceiling painting (two coats) with

plastic emulsion paint of approved brand

and manufacture on undecorated Ceiling

surface to give an even shade including

throughly brushing the surface free from

mortar droppings and other foreign

matter and sand papered smooth.

34 697.96 Finishing wall with weather proof exterior 160.59 SMT.

emulsion paint on wall surface (two

coats) to give an required shape even

shade after thoroughly brushing the

surface to remove all dirt, and remains of

loose powdered materials.etc complete.

Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5

35 217.56 Providing and laying integral cement 854.46 SMT.

based water proofing treatment including

preparation of surface as required for

treatment of roofs, balconies, terraces

etc. consisting of following operations.

(a) Applying and grouting a slurry coat

of neat cement u ',brick bats is finally

covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special

water proofing compound confirming to

IS:2645 & top smooth finished with

trowel with false chequered marking of

300 mm.size.The treatment is carried

36 11.60 Providing and constructing sandwitch 8290.08 RMT.

type Granite stone top & bottom Kota

Stone platform 0.6 mt. wide & 0.75 mt.

height, including front granite stone patti

and top granite skirting pati, vertical

partitions of Kota stone and Edge

vertical granite stone on Both sides with

cement Mortar(1:1) as required comp as

per drawings and Instruction of Engineer

37 4.00 Providing and fixing wash down water 4248.45 No

closet (European type, W.C. Pan) with

integral P or S trap including jointing the

trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for

separately)(A) vitreous China Pattern :(i)

in white colour, Providing and fixing

Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete

with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball

valve with polythene float, C.P brass

handle unions and couplings for

connections, with inlet, outlet and

overflow pipes, 40mm dia.porcelain

enamelled flush bend including cutting

holes in walls and making good the

same connecting the flush bend with

cistern and closet (overflow pipe to be

measured and paid for separately)(A)

Vitreous China (I) In white colour,

Providing and fixing plastic seat and

cover for wash down water closer with

C.P. brass hinges and rubber buffers.

(B) Black plastic seal and cover, With Jet

spray heavy duty with S.S. Braided hose

38 8.00 Providing

60 cm long.and fixing washbasin with 2463.46 No

single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting

holes and making good the Providing

and fixing C.P. brass waste for

washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap,

stop tap, bottle trap etc.

39 16.00 Providing and fixing PVC SWR Nahni 571.08 No

trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal

diameter of self cleansing design with

C.I scread down or hinged grating

including the cost of cutting and making

good the walls.

40 28.00 Providing and fixing screw down bib taps 186.83 No

of following size.(A) Brass screw down

bib tap polished bright. (i) 15mm dia.

41 4.00 Providing & fixing of overhead shower 80 2030.10 No

mm (3”) dia with 3 flow with Overhead

Shower arm 200 mm with wall flange

complete (i) 15mm dia.,Providing and

fixing brass screw down stop tap.(A)

42 4.00 Providing and fixing Kitchen sink with 3158.53 No

C.I. or M.S. brackets, painted white

including cutting holes in walls and

making good the same (C) S.S. &

Sink.(i) 600mm x 450mm x 150mm size

with Providing and fixing C.P. brass

waste for washbasin or sink, piller tap,

stop tap, bottle trap etc.

43 8.00 Providing and fixing Gun metal check or 420.63 No

non-return fullway wheel valve. 25mm.

44 8.00 Providing and fixing Gun metal check or 663.43 No

non-return fullway wheel valve. 40mm.

45 4.00 Providing and fixing chromium plated 263.77 No

brass half turn flush cock of approved

quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

46 4.00 Providing and fixing ball cock of 132.89 No

approved. quality as directed.(A) Copper

Metal (A) 25mm. dia.

47 24.00 Providing laying and jointing in true line 72.65 RMT.

and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings

as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

48 48.00 Providing laying and jointing in true line 91.84 RMT.

and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings

as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

49 80.00 Providing laying and jointing in true line 195.67 RMT.

and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings

as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing

of pipe and joints and fixing the same

with adhesive solvent, including cost of

50 48.00 Providing, laying and jointing in true line 836.73 RMT.

and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one

end plain and other end socketed with

rubber ring, & fittings conforming to ISI

14735-1999 of approved make for

drainage system pipe line, pipe shall be

jointed with each other with rubber

lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center

or shall be concealed in walls as directed

including necessary fittings such as

bends, shoes etc. including testing of

pipes and joints and jointed with

adhesive solvent cement including cost

of all materials.

51 4.00 Providing and fixing S.W. gully trap with 1246.92 No

C.I. grating brick masonry chamber and

water tight C.I. cover with frame of

300mm x 300mm size (inside) with

standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R

52 8.00 Constructing Brick masonry road gully 2017.19 No.

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I.

horizontal grating wih frame complete.

53 8.00 Constructing brick masonry chamber for 2932.93 No

underground C.I. Inspection chamber

and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M.

1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions

total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and

450mm deep for single pipe line.

54 16.00 Providing & fixing G.I. Rain water spout 101.91 No.

of 50 mm.dia & 30 cm length etc.

55 4.00 Providing and fixing in position cowel 501.87 No.

went to pipes.(C) 100mm dia

56 2000.00 Providing erecting and fixing double 3.95 Lit

coated PVC. (ISI) water tank of

required capacity each with all

necessary fittings and connection etc.

57 4.00 complete

Providing on terrace.

Sock pit of 5.0 Cum Volume 25286.36 No

(internal diameter of 1.50 meter)

including Excavation and filling brick bats

with dry masonary work attop for 45cm

height including covering the top with

R.C.C. SLab with One Man hole and C.I.

cover of 0.60 x 0.45m , including

providing vatas in Cement Motar 1:3 with

the finishing curing and necessary

connection with the septic tank outlet etc

complete as directed by Engineer in

58 4.00 Providing septic tank of inside 40419.19 No

dimensions( 2.5 mt. x 2.0 mt.x 1.5 mt.)

as Directed by incharge with brick

masonary of CM 1:6 the foundation floor

with 1:5:10 B.B.C.C. finished with

mm C.P. in C.M. 1:4 root cover of R.C.C.

slab inclunding connection pipe from

inlet and outlet etc.comp.

59 4.00 Providing of Bala Work for Anganwadi 30300.00 Job

like Wall paintings on inside and outside

walls upto the Slab height or lintel height,

Measurements - vertical Scale Paint,

Wall arts, Black board, Drawings of

Animal, birds, Vegetables, Nutrition

chart,Days-Months, Making Yojana Logo

Board with all the deatils, writing

bruilding name in paint on the front side,

etc complete as per Annexure (A) & as

per Directed by Engineer in charged.

60 4.00 Providing, erecting & Fixing Fibre 10100.00 No

Fabricted make childern Slide fit for

children age group coming to Anganwadi

and approved by Engineer in charge, in

the playground of approved brand and

quality at the site ad directed by

engineer in Charge

61 4.00 Providing, erecting & Fixing Fibre 11110.00 No

Fabricted make childern Swing for

children age group coming to Anganwadi

and approved by Engineer in charge, in

the playground of approved brand and

quality at the site ad directed by

engineer in Charge

62 20.00 Providing Cello/Nikamal two Seat 3030.00 Nos

polypropelene Plastic Junior Well

finished Study/Play Table with Chairs for

Kids from 3-10 Years (Attractive colours

like RED/Yellow/Green) with all

necessary charges and taxes as

Directed by the Engineer in charged.

63 8.00 Supplying & installing of Dry Chemical 2525.00 Nos

Powder type 6 Kg. Capacity fire

extinguisher as per I.S. 2171 ISI. Mark

with necessary fittings etc. complete.

64 9.64 Providing and fixing kitchen platform 17281.10 Sqm

trolley having three drawers of SS (IS

304) of required size like thali, katleri,

perforated, partition, cupsosar type in

kitchen platform having drawer front side

and backside by using 19mm thick all

proof plywood of ( IS 710 ) quality all

side laminated etc. as directed. The size

of SS (IS 304) basket of size 4" to 18"

for thali, dish, katleri, perforated,

partition, cupsosar type as directed

including necessary S.S. fittings,

handles, nobs, telescopic channels, etc.

65 4.00 Providing Office table with wooden top 5555.00 No

of approved brand Ply base of

appropriate thickness of required

dimensions with base support made up

of Waterproof Ply of approved Brand(ISI

make) on site with all necessary fittings

, Fixtures like handles and adhesives,etc

complete of design directed by Engineer

66 8.00 Providing Chair with armrest with leather 4040.00 Nos

/PVC / Mesh finish and proper cushion

on site with all necessary fittings

Fixtures and adhesives,etc complete of

design directed by Engineer incharged

67 12.12 Providing and fixing of Polished Kota 1089.67 Sqm

Stone / Kadapa for making Horizontal

Shelves on wall using appropriate

adehsive/motar and making appropriate

vertical supports wherever necessary in

brickwork or Kota Stone and and jointed

with gray cement slury mixed with

pigment to match the shade of slab and

making the site cleaning as original with

all necessary material and labour

charges etc complete as per design

directed by Engineer incharged

Deputy Executive Engineer

Executive Engineer

Panchayat ( R & B) Sub

Division(R&B) Division

I/we am/are/ willing to carry out the work at ………………….% below / Above

……………………………………….percent below / Above

(should be written in figures and words)

Tendered amount mentioned above amount of my / our tender works out as under.

Tendered Amount5117283.01

Rs……………………… Tendered Amount

Deduct………. % below Rs……………………. Add…………% Above Rs………………….

Net Amount Rs………………………………. Net Amount Rs……………………………….

Net Amount in words in Rs……………………………………………………………………………………….

Special Note :-

Contractor Shall give only rebate in tendered amount mentioned above and contractor shall

state " NIL" Percentage, if no reduction is offered.

Note :- 1 All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

Note :- 2 All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Note :- 3 Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

Note :- 4 To be continued on additional sheet,if found necessary.