Comprehensive Maintenance and Repairs, Replacement of Defective Parts of Lifts of ECE, ESCON, IES Make at Naval Park, INHS Kalyani, Nausena Baugh and Naval Dockyard Under GE Utility - I, Visakhapatnam

Amount

Notes for Serial Item No. 1: [a] MINIMUM MANPOWER TO BE EMPLOYED: The contractor shall be required to employ the following minimum tradesmen for Serial Item No. 1 of BoQ in following combination per Shift of 08 Hours in a day of 24 Hours and shall report to Office of AGE [E/M] for day to day maintenance and efficient operation of Lifts: [i] Three Lift Mechanics and Three Helpers per Shift of 08 Hours from 0600 Hours to 1400 Hours. [ii] Three Lift Mechanics and Three Helpers per Shift of 08 Hours from 1400 Hours to 2200 Hours. [iii] Two Lift Mechanics per Shift of 08 Hours from 2200 Hours to 0600 Hours.

[b] The rate quoted is deemed to be inclusive of supply and fixing of all Major and Minor Spares viz. Mechanical / Electrical / Electronic / LED Lights etc. except Spares catered vide Serial Item No. 2 to 17 of BoQ as and when required for trouble free and smooth operation of lifts also including overhauling as and when required to all mechanical parts of lifts, Rewinding of Electric Motors, repair/maintenance of Gear Unit, repair / maintenance of Door Drive, Controllers, Pulleys, Limit Switches, Relays etc. complete all as directed by the Engineer-in-Charge. All the safety measures including ARDs shall be ensured for serviceable condition round the clock and cost of their spares, batteries etc. shall deemed to be included in the rate quoted. Nothing extra shall be paid extra on these accounts. Spares catered vide Serial Item No. 2 to 10 of BoQ shall be measured and paid separately as "Supply Only" whenever required and rate quoted for Serial Item No. 1 of BoQ shall be excluding the same. However, fixing / repairs shall be deemed to be included in the rate quoted [c] The rate quoted shall be deemed to be inclusive of testing of each lift by Licensed Lift Inspector of Government of Andhra Pradesh once in Contract Period for worthiness of the Lift in respect of safety. Certificate issued by the Licensed Lift Inspector shall be submitted to the Engineer-in-Charge and a copy of Certificate shall be displayed in all Lift Cabins as directed by Engineer-in-Charge. [d] Emergency Light and necessary tools shall be available in a tool box in the shift for smooth functioning of lifts. [e] Conveyance and communication system like mobile phone etc. shall be provided by the contractor to all Lift Mechanics and Helpers. [f] The contractor shall abide by the latest Labour Rules and Minimum Wages Act. [g] Wages paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State / Central Government from time to time whichever is higher. The contractor shall also insure the workmen employed on the job. [h] The contractor is responsible for Insurance, EPF, ESI, Gratuity, Bonus, Labour Welfare Cess etc., as applicable and shall be paid to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same.

[i] INSURANCE AND DRESS CODE: The contractor shall provide the workmen with Dark Blue Colour uniform with labels showing the Name of Firm and the Designation and "GE [U-I] [V]" printed on them along with protective clothing. The contractor shall also provide shoes to the workers and the persons shall not be allowed to enter the work site without wearing shoes. [j] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of Lifts System / Safety Mechanism or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations. [k] The contractor shall carryout the comprehensive maintenance of the lifts catered under subject work through the Original Equipment Manufacturer of that lift or from their accredited / authorised agencies only. The lowest bidder shall submit MoU from the Original Equipment Manufacturer of the Lift or from their accredited / authorised agencies to provide technical support, trained persons for maintenance & testing and spares before commencement of the work to GE. The spares shall be of the make as per existing or as per the OEM.

Supply only Micro Processor based Controller for full collective operation to match existing Auto Door Lift including software development complete all as to match existing one side opening lift up to G+14 Floor including Input Output Modules complete all as specified and as directed. Make: Allen Bradley / Toshiba

Supply only Variable Voltage Variable Frequency [VVVF] Drive suitable for Lift serving up to G+14 Floors, 11 KW to 15 KW Lift Motor including feeding all parameters and interfacing with Controller Micro Processor and Drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift, suitable for operation on 380 to 460 Volts, 3 Phase, 50 Hz, AC Supply complete all as per manufacturer's instructions, complete all as specified and as directed. Make: Toshiba / Fujitech / Yasakawa / Emerson / ABB

Supply only Microprocessor L40BWA complete all as specified and as directed. Make: Allen Bradley

Supply only Controller made out of 16 SWG MS Sheet with Powder Coating along with Control Switch Gear, Relays, Transformer, PCB, Logic Card, SMPS Contractors, Wiring etc. complete all as specified and as directed. Make: ECE / Schindler / Otis / Escon / IES

Supply only Machine unit including Gear Box of 11 KW Capacity suitable for up to G+14 Floors of capacity 10 Passengers complete all as specified and as directed. Make: ELECON / MONTANARI / ECE / ESCON / IES.

Supply only Full Length Infrared Sensor, 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC complete all as specified and as directed. Make: Cedes / TL Jones / IES / Escon / Johnson / Bharat Bijlee / Otis

Supply only Changer Card of Automatic Rescue Device, 230 Volts Input and 72 Volts Output complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Converter Card of Automatic Rescue Device to covert 72 Volts DC Input to 24 Volts DC Output for Control Unit complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Mosfet Card of Automatic Rescue Device to covert 72 Volts DC Input to 230 Volts AC, 3 Amps Rating complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Rotary Encoder for Speed feedback of Main Drive complete all as specified and as directed. Make: Jeltron / As per OEM

Supply only Car Door Motor with Built-in Rotary Encoder and suitable VVVF Drive for Car Door operation complete all as per manufacturer instructions, as specified and as directed. Make: Toshiba / Monarch / Fermator / ECE / ESCON / IES.

Supply only Maintenance Free Sealed Battery, 12 Volts, 7 AH Capacity complete all as specified and as directed. Make: Exide / Amaron

Supply only Main Hoist Steel Rope of size 13mm, Heavy Duty complete all as specified and as directed. Make: Usha Martin

Supply only COP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.2 mm thick [Scrolling Type] including Buttons, Lock, all other relevant features and wiring complete all as specified and as directed. Make: ECE / ESCON / IES.

Supply only LOP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.2 mm thick [Scrolling Type] including Buttons, Lock, all other relevant features and wiring complete all as specified and as directed. Make: ECE / ESCON / IES.

M & L for Rewinding Main Motor of 10 HP to 15 HP Capacity, 3 Phase, 415 Volts, AC, 50 Hz, 1450 RPM using super enamelled copper conductor of suitable gauge including insulation, varnishing, packing and testing etc., cleaning, greasing etc. and testing including replacement of nuts and bolts for foundation etc. complete all as specified and as directed.

Velox Engineering Solutions Pvt Ltd

REAL ENGINEERING WORKS

Eastern engineering Enterprises

SERVO-TECH ENTERPRISES

SANTOSH CONSTRUCTIONS

UNIVERSAL ENTERPRISES