Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.8 L+₹83,863.27 (2.47%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BINNDER | |
| 3 | L3₹35.2 L+₹1.2 L (3.52%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L3 | Rejected-Finance OTHER THAN LOWEST BINNDER | |
| 4 | L4₹35.2 L+₹1.2 L (3.65%)Rejected-Finance VILL POST BARANACHINA PS DINHATA DIST COOCH BEHAR 736135 | COOCHBEHAR | WEST BENGAL | 736135 | L4 | Rejected-Finance OTHER THAN LOWEST BINNDER | |
| 5 | L5₹36.1 L+₹2.2 L (6.35%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L5 | Rejected-Finance OTHER THAN LOWEST BINNDER |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
1 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
PROVN OF GUARD HOUSE WITH WATCH TOWER AT MAIN GATE AT MECH INF BN ILP TELEPARA UNDER GE(S) BINNAGURI.
2023_MES_589214_1
8566/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹83,000
Yes
19 May 2023
12 Apr 2023
3 May 2023
12 Apr 2023
1 May 2023
24 Apr 2023
Amount
Surface excavation n.exc nexc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed
Excavating in trenches, nexc 1.5 m wide and nexc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sqm on plan and nexc 1.5 m in depth and getting out soft/loose soil all as specified and directed
- Ditto above - but exc 1.5 m and nexc 3.0 m in depth and getting out soft/loose soil all as specified and directed
M&L for PCC (1:4:8), D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified & directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate in columns, pillars, piers, posts and struts complete all as specified & directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span and similar items complete all as specified & directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate as in chajjas and similar items complete all as specified & directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed
M&L for RCC M25 (design mix), using 20 mm graded aggregate as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings complete all as specified & directed
M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified & directed
Ditto Ser No. 12 but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to rough finished flat surfaces
Use & waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal in shape having rough finished surface of concrete complete all as specified and directed.
Use & waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surfaces complete all as specified and directed.
Use & waste of formwork to chullah hoods, chajjas, troughs and similar items including edges etc. rough finished flat surfaces complete all as specified and directed.
Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) etc. rough finished flat surfaces complete all as specified and directed.
Use & waste of formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) etc. rough finished flat surfaces complete all as specified and directed.
Use & waste formwork edges of concrete flats, treads, breaks in floors, window cills, concrete railings, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished flat surfaces all as specified and directed.
M&L for Fly ash Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed
M&L for Fly Ash Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified & directed
S&F bands, straps, clamps, cleats, holdfasts & similar small articles, supports or stays for rainwater, ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165.
M & L for PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in footpath coping /benching to sides of foot path bed block or holdfast block & similar items including forms moulds etc complete all as specified
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed
S&F Framed work as in doors or gates of angle or other section conforming to Fe-410W (Gde-E-250) quality-A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified & directed.
M&L for Rendering 20mm thick in two layers (10mm + 10mm) on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC in outer layer on wall surface and finishing even and fair complete all as specified and directed.
Supply only integral water proofing compound.
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) on wall surface and finishing even and fair complete all as specified and directed
M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) on ceiling surface and finishing even and fair complete all as specified and directed
S&F factory made z section steel window with side hung shutter fame includingprijecting/box type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded including a shop coat red oxide priming complete all as specified and directed
S&F factory made z section steel window with side hung shutter fame includingprijecting/box type hinge with steel handle and steel peg stay complete without glazing bars dovetailed or welded including a shop coat red oxide priming complete all as specified and directed
S&F Pressed steel door frames of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed
S&F 35 mm thick Second class Hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
S&F 35 mm thick Second class Hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b); supplied and fitted to chowkats
S & F for Solid PVC double Door Frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5sqm complete all as specified & directed
S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified & directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed
S&F 150mm extruded aluminium alloy handles D type anodized all as specified & directed
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers nexc 15cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for providing 100mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in sub base of floor complete all as specified and directed.
M&L for providing 40mm thick PCC (1:2:4) type B1 using 20mm graded aggregate as in sub base of floor complete all as specified and directed.
M&L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for coloured Non skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but nexc 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured joint free tiles 300x450x7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. in Bath, WC, Kitchen and inside cupboards set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for laying machine cut kota stone slab flooring 20-25mm thick over cement screed base of 15mm thick (average thickness) in cement motar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for laying machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick (average thickness) in cement motar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over one coat of alkali resistant primer complete all as specified and directed
M&L for applying two coats of oil bound distemper over one coat of primer on walls including preperation of new or previously untreated surfaces complete all as specified & directed.
M&L for preparation of new wood or wood based Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed
M&L for preparation of new iron surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint incl preparation of surface complete all as specified and directed
M&L for providing 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection and finished the surface even & smooth without using extra cement all as specified and directed.
M&L for providing PCC (1:3:6) using 20 mm graded aggregate as in surface channels and drain complete all as specified and directed.
S/F PVC Pipes single socketed,in any length with rubber ring joints, laid in trenches,fixed on walls/floors or in any Position 110mm dia bore.
S/F PVC (SWR) bends any radius 110 mm dia.
S/FPVC (SWR)reducer door T(equal or unequal) 110mm to 75mm dia
S&F Galvanised MS wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as spd & directed.
S/F Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 140mm
S/F Brass 300mm, ordinary rat tail rod pattern springs, including rollers and rollrer plate complete
S/F vitreous wash down water closet pan pedestal pattern white ncluding connection in drain and in flushing pipe complete including p or s trap and including plastic water closet cseat cover with flat bottom and cover with ms chromium plated hinge device isi marked complete all as specified and directed
S/F vitreous china wash basin, white flat back, size 550x400mm including brackets,cutting for and pinning in ends of brackets or erecting stand all as specified and directed .
Supply only for PVC 10 ltrs capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flash pipe of polythylene of low or high density or PVC pipe 32 mm dia all as specified and directed.
S&F for 20mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.
S&F for 15mm bore tube medium grade galvanized with all fitting and fixed to wall, ceiling or laid in floor and trench complete all as specified and directed.
S & F for 15 mm Stop valves/angle valves, castcopper alloy,chromium plated, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15mm Bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, fancy type . screwed for iron pipe or for brass ferrule and fixed fixed all as specified in SSR Part I
S&F for PVC connection 15mm dia sizes with PTMT nuts of length 450 mm complete all as specified & directed.
S/F pillar taps, fancy type, cast copper alloy,with capstan heads,chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and flfnuts,screwed for iron pipe of 15mm dia
S/F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats,
S/F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia
S/F PVC Pipes single socketed,in any length with rubber ring joints, fixed to wall 75mm dia.
S/F PVC (SWR) bends any radius 75 mm dia.
S/F PVC (SWR) vent cowl 75mm dia
S/F brass chromium plated shower rose 100mm size with swivel joint with shower arm including fixing to 15mm steel pipe or union.
S/F 32 mm dia waste pipe, Waste coupling of PTMT (half or full threaded). Minimum weight 45 grams.
S&F 32mm dia PVC waste pipe for WHB all as specified and directed.
S & F for 20 mm Gun metal globe or gate valve with iron wheel head , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S & F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
M&L for 15mm thick screwed bed of bedding layer in cement mortar 1:4 mixed with WPC over exiting RCC roof surface and finished the surface and even and smooth without using extra cement to receive APP based polymeric membrane all as specified and directed. Note :- WPC shall be measured and paid under separate item.
M&L for water proofing treatment to RCC roof including parapet with following course of treatment. (a) Applying coat of bituminous primer over plantered surface of roof including parapet and allow to dry as per manufacture instruction. (b) Supply and laying 4mm thick APP based polymeric membrane not less than 4Kg per Sqm over primed surface of roof slab including parapet. (c) Applying evenly one coat of bituminous aluminum paint over finished surface of APP membrane as per manufacture instruction. Note :- (i) Laying of APP based polymeric membrane shall be done by torch application or as per manufacturer instruction. (ii) Minimum over lap of 75mm and 100mm in membrane should be provided at side lap & end lap respectively.
M&L for chemically treated machine pressed precast concrete coloured interlocking paver block with Grey cement and no pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in path with and including use and waist of form work and finishing the surface even and rough to receive the topping layer or tiling complete.
M&L for rendering 15mm thick of on fair faces of brick work or complete surface of walls in cement mortar 1:4 even and fair compete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) in foundations, filling and mass concrete etc complete all as specified and directed.
M&L for 200mm bore grade, SGSW drain pipe laid in trenches and jointed in cement mortar complete all as specified.
Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting benching for and forming branch channel (1/2 round for 3/4 section in cement 1:2:4 type B1 smooth finished and reforming benching as required.
M&L Concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC Conduit pipe and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan / exhaust fan point controlled by one way switch 5/6 amps.
(c) One 3 pin socket outlet , 5 Amps on same board controlled by one way switch 5/6 amps.
(d) One 3 pin socket outlet , 5 Amps on independent board controlled by one way switch 5/6 amps.
(e) One light point controlled by two way switch 5/6 amps.
All as per item no 94 (d) here in above but copper conductor of size 2.5 sqmm for 15/16 Amp socket on independent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole 2 way complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin , 5 and 15 amp flush type universal complete all as specified and directed.
S&F stepped type electronic fan regulator flush type complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.
S & F IP 20 , LED Light 20 Watt ( 4 feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative end caps with integrated high efficiency electronic driver and surge suppressor of 2 KV or more, luminaire efficiency> 95 lumens/watt, power factor> 0.90, operating range 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified and directed.
S & F IP 20 , LED Light 10 Watt ( 2 feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative end caps with integrated high efficiency electronic driver and surge suppressor of 2 KV or more, luminaire efficiency> 95 lumens/watt, power factor> 0.90, operating range 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified and directed.
S & F LED street light fittings 35 watt in aluminium PDC housing, toughned glass cover with IP66 protection complete all as spedified and as directed.
LED search light 150 Watt CS mounted-manually operated, suitable for mounting of search light on railing/ platform of watch tower , made up of steel & suitable for manual rotation of light on the hrizontally (360 degree) and vertically (>45 degree) with provision of both locking arrangement at desired position complete all as specified and as directed by Engineer in charge (Make- Kalin Cat Part- LRFLL-25CP15 or equivalent
M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
S&F ceiling fan complete with blades,down rods and accessories including provision of hook for hanging ceiling fan,230 V, 1200 mm sweep. BEE star rated with Brushless direct current (BLDC) motor complete all as specified by Engr in charge.
S & F exhaust fan , steel body AC single phase, 230 V of size 300 sweep with blades and frames and louvers completa all as specified
M&L for earthing complete with Galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI strip 25x4mm thick as earthing leads by means of bolt, nut, check nuts and washers galvanised iron or steel all as shown in elctrical plate No 5 of SSR Part I connected to earthing test point or as specified or indicated and testing on completion including excavation and earth work, PCC pit with RCC cover having suitable handle, 32mm bore GI Medium grade watering pipe with funel and wire mesh, 15 mm dia GI Light grade Protection pipe complete.
S&F Aluminium Strip 25 x 3 mm with saddles & fixing screws etc,for earth continuity conductor main earthing lead , roof conductor & down conductors above ground suitably fixed to wall or concealed in wall , or passing through pipes incl. all necessary fixing arrangement for lightning protection complete.
S&F air termination single pointed aluminum rod of 12mm dia, 300mm long fixed with 02 nos sutable sized nuts,bolts & washers incl. making good the disturbed surfaces complete.
S&F in repair of test point terminal block made of gun metal or phosphorous Bronze 75x75x 25 mm dilled and screwed incl 3 Nos 8mm dia 50 mm long hex head screws rectangular opening at top and bottom for entry of down earth strip, fixing screws and bolts for mounting on wall.all as specified.
M&L for GI Pipe medium grade 40 mm dia for fixing of air termination single pointed aluminum rod of 12mm dia, 300mm long on the roof of builings for effective lightning protection system incl. PCC for fixing complete to the satisfaction of Engr -In - Charge.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm directed by Engineer-in-charge.
Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.
M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.
Rifle Rack for 16 Rif Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
L. B. SHARMA
BBKundu
PULAK SAHA
samrat saw mill and joinery workshop
M/s. MD IRSHAD
P CHAKRABORTY CONSTRUCTION
M/S RATNESH KUMAR SINGH
M/S MAJUMDER CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .